Skip to contentSkip to conversation

Pull request for ARM zynq

U-Boot Michal Simek 1 participant 3 messages Sep 13, 2012 – Feb 12, 2013

lore
Share & tools
lore
#0 lore raw

Hi Albert, CC: Joe and Tom

a month ago I have sent 4 Xilinx ARM zynq patches to mailing list (v2) (reminder yesterday) and I haven't got any reaction from anybody. The first patches were commented by Joe and problems fixed in the next version.
There is one network driver which should require ACK from Joe
and others from ARM maintainer.
I would like to get these patches to mainline.

Albert and Tom: Can you please look at these patches and tell me what you thing? The best will be if you can pull them to your trees.

Here are links to patchwork
http://patchwork.ozlabs.org/patch/177907/
http://patchwork.ozlabs.org/patch/177908/
http://patchwork.ozlabs.org/patch/177909/
http://patchwork.ozlabs.org/patch/177910/

Thanks,
Michal

The following changes since commit a6f0c4faa4c65a7b7048b12c9d180d7e1aad1721:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-avr32

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git master-zynq

Michal Simek (4):
serial: Add Zynq serial driver
net: Add driver for Zynq Gem IP
arm: Support new Xilinx Zynq platform
xilinx: Add new Zynq board

  arch/arm/cpu/armv7/zynq/Makefile        |   52 ++++
  arch/arm/cpu/armv7/zynq/lowlevel_init.S |   27 ++
  arch/arm/cpu/armv7/zynq/timer.c         |  151 ++++++++++
  board/xilinx/zynq/Makefile              |   54 ++++
  board/xilinx/zynq/board.c               |   64 +++++
  boards.cfg                              |    1 +
  drivers/net/Makefile                    |    1 +
  drivers/net/zynq_gem.c                  |  453 +++++++++++++++++++++++++++++++
  drivers/serial/Makefile                 |    1 +
  drivers/serial/serial_zynq.c            |  200 ++++++++++++++
  include/configs/zynq.h                  |  110 ++++++++
  include/netdev.h                        |    2 +-
  12 files changed, 1115 insertions(+), 1 deletions(-)

create mode 100644 arch/arm/cpu/armv7/zynq/Makefile create mode 100644 arch/arm/cpu/armv7/zynq/lowlevel_init.S create mode 100644 arch/arm/cpu/armv7/zynq/timer.c create mode 100644 board/xilinx/zynq/Makefile create mode 100644 board/xilinx/zynq/board.c create mode 100644 drivers/net/zynq_gem.c
create mode 100644 drivers/serial/serial_zynq.c create mode 100644 include/configs/zynq.h

Signature · 4 lines
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
#1 lore raw

Hi Albert,

please pull these three patches to your arm custodian tree. All of them are related to xilinx zynq.
Also after my discussion with Wolfgang Denk I have enabled DCC for zynq because we are using it in one configuration and this driver is not compiled by any platform.

Thanks,
Michal

The following changes since commit d62ef5619c9249772247d6af3b8e65207ae0c871:
Jagannadha Sutradharudu Teki (1):
sf: stmicro: Add support for N25Q256A

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git mainline/arm

Michal Simek (3):
xilinx: zynq: Enable DCC and create new zynq_dcc board
arm: zynq: Add SLCR support with system reset
arm: zynq: Add lowlevel initialization to C

  arch/arm/cpu/armv7/zynq/Makefile           |    1 +
  arch/arm/cpu/armv7/zynq/cpu.c              |   28 +++++++++-
  arch/arm/cpu/armv7/zynq/slcr.c             |   63 ++++++++++++++++++++
  arch/arm/include/asm/arch-zynq/hardware.h  |   85 ++++++++++++++++++++++++++++
  arch/arm/include/asm/arch-zynq/sys_proto.h |   30 ++++++++++
  boards.cfg                                 |    1 +
  include/configs/zynq.h                     |    5 ++
  7 files changed, 212 insertions(+), 1 deletions(-)

create mode 100644 arch/arm/cpu/armv7/zynq/slcr.c create mode 100644 arch/arm/include/asm/arch-zynq/hardware.h create mode 100644 arch/arm/include/asm/arch-zynq/sys_proto.h

Signature · 4 lines
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
#2 lore raw
In reply to Michal Simek

Hi Albert and Tom,

can you please look at my pull request?

Thanks,
Michal

2012/9/13 Michal Simek <[email protected]>:

Quoted 70 lines

Hi Albert, CC: Joe and Tom

a month ago I have sent 4 Xilinx ARM zynq patches to mailing list (v2) (reminder yesterday)
and I haven't got any reaction from anybody. The first patches were commented
by Joe and problems fixed in the next version.
There is one network driver which should require ACK from Joe and others from ARM maintainer.
I would like to get these patches to mainline.

Albert and Tom: Can you please look at these patches and tell me what you thing?
The best will be if you can pull them to your trees.

Here are links to patchwork
http://patchwork.ozlabs.org/patch/177907/
http://patchwork.ozlabs.org/patch/177908/
http://patchwork.ozlabs.org/patch/177909/
http://patchwork.ozlabs.org/patch/177910/

Thanks,
Michal

The following changes since commit a6f0c4faa4c65a7b7048b12c9d180d7e1aad1721:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-avr32

are available in the git repository at:

git://www.denx.de/git/u-boot-microblaze.git master-zynq

Michal Simek (4):
serial: Add Zynq serial driver
net: Add driver for Zynq Gem IP
arm: Support new Xilinx Zynq platform
xilinx: Add new Zynq board

 arch/arm/cpu/armv7/zynq/Makefile        |   52 ++++
 arch/arm/cpu/armv7/zynq/lowlevel_init.S |   27 ++
 arch/arm/cpu/armv7/zynq/timer.c         |  151 ++++++++++
 board/xilinx/zynq/Makefile              |   54 ++++
 board/xilinx/zynq/board.c               |   64 +++++
 boards.cfg                              |    1 +
 drivers/net/Makefile                    |    1 +
 drivers/net/zynq_gem.c                  |  453
+++++++++++++++++++++++++++++++
 drivers/serial/Makefile                 |    1 +
 drivers/serial/serial_zynq.c            |  200 ++++++++++++++
 include/configs/zynq.h                  |  110 ++++++++
 include/netdev.h                        |    2 +-
 12 files changed, 1115 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/Makefile
 create mode 100644 arch/arm/cpu/armv7/zynq/lowlevel_init.S
 create mode 100644 arch/arm/cpu/armv7/zynq/timer.c
 create mode 100644 board/xilinx/zynq/Makefile
 create mode 100644 board/xilinx/zynq/board.c
 create mode 100644 drivers/net/zynq_gem.c
 create mode 100644 drivers/serial/serial_zynq.c
 create mode 100644 include/configs/zynq.h

--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian

Signature · 5 lines
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform