boot-live.cfg: enable BLK_DEV_INITRD in kernel

PATCH In review Mihai Lindner 6 participants 21 messages Sep 18, 2012 – Sep 20, 2012

lore

Share & tools

lore

Mihai Lindner

author

2012-09-18 05:59 UTC #0 lore raw

cover boot-live.cfg: enable BLK_DEV_INITRD in kernel

Please pull into linux-yocto-3.0, meta.

Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050

[YOCTO #3050]

Signed-off-by Mihai Lindner <[email protected]>

---

The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:

meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)

are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta

Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel

 meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel

 meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

Signature · 1 line

1.7.8.6

Mihai Lindner

author

2012-09-18 06:00 UTC #1 lore raw

PATCH 1/1 boot-live.cfg: enable BLK_DEV_INITRD in kernel

[YOCTO #3050]

Signed-off-by Mihai Lindner <[email protected]>

---
 meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

meta/cfg/kernel-cache/cfg/boot-live.cfg +2 -0

index a102052..a3ea9f5 100644
@@ -7,3 +7,5 @@ CONFIG_RD_GZIP=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_ISO9660_FS=y
 CONFIG_BLK_DEV_SR=y
+# Initial ramdisk support
+CONFIG_BLK_DEV_INITRD=y

Signature · 1 line

1.7.8.6

Bruce Ashfield

2012-09-18 12:22 UTC #2 lore raw

In reply to Mihai Lindner

Quoted 2 lines · Mihai Lindner

Please pull into linux-yocto-3.0, meta.

Adding linux-yocto, Darren and Tom.

This looks fine to me, and we should consider it for all the repositories, not just 3.0.

Tom/Darren. Any side effects you can think of for this change ?

Bruce

Quoted 30 lines

Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)

Tom Zanussi

2012-09-18 13:49 UTC #3 lore raw

Quoted 11 lines · Bruce Ashfield

Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?

No, but shouldn't it already be there, inherited from base.cfg?

Tom

Quoted 33 lines

Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)

Mihai Lindner

author

2012-09-18 13:58 UTC #4 lore raw

Quoted 7 lines · Tom Zanussi

Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.

Quoted 7 lines

Quoted 5 lines
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?

For cedartrail, at least, standard.cfg is used.

--Mihai

Quoted 40 lines

Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)

Signature · 2 lines

Mihai Lindner
Yocto Project

Bruce Ashfield

2012-09-18 14:18 UTC #5 lore raw

Quoted 11 lines · Mihai Lindner

Quoted 10 lines · Tom Zanussi
Quoted 9 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.

Quoted 6 lines

Quoted 4 lines
Quoted 2 lines
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.

And standard will include base.cfg, which already has this option. Are you actually
seeing this not in the final .config of your build ?

Bruce

Quoted 52 lines

--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
--
Mihai Lindner
Yocto Project
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines

"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"

Tom Zanussi

2012-09-18 14:23 UTC #6 lore raw

In reply to Mihai Lindner

Quoted 11 lines · Mihai Lindner

Quoted 10 lines · Tom Zanussi
Quoted 9 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.

Quoted 7 lines

Quoted 4 lines
Quoted 2 lines
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.

And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...

Tom

Quoted 44 lines

--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)

Mihai Lindner

author

2012-09-18 14:46 UTC #7 lore raw

Quoted 15 lines · Tom Zanussi

Quoted 14 lines · Mihai Lindner
Quoted 13 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?

Quoted 7 lines

Quoted 4 lines
Quoted 1 line
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...

Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai

Quoted 51 lines

Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)

Signature · 2 lines

Mihai Lindner
Yocto Project

Bruce Ashfield

2012-09-19 15:44 UTC #8 lore raw

Quoted 18 lines · Mihai Lindner

Quoted 17 lines · Tom Zanussi
Quoted 16 lines · Mihai Lindner
Quoted 14 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?

Quoted 8 lines

Quoted 5 lines
Quoted 2 lines
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai

To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?

I won't be able to poke at it myself for another day or so.

Bruce

Quoted 54 lines

Quoted 52 lines
Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
    meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
   meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
   1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
   meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
   1 files changed, 2 insertions(+), 0 deletions(-)

Mihai Lindner

author

2012-09-19 15:56 UTC #9 lore raw

Quoted 28 lines · Bruce Ashfield

Quoted 18 lines · Mihai Lindner
Quoted 17 lines · Tom Zanussi
Quoted 16 lines · Mihai Lindner
Quoted 14 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai

Quoted 8 lines

To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
I won't be able to poke at it myself for another day or so.
Bruce

I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why. base.cfg is not included, nor stanadrd.cfg it seems.
The list of included cfg files is way to short.

--Mihai

Quoted 57 lines

Quoted 54 lines
Quoted 52 lines
Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
    meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
   meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
   1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
   meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
   1 files changed, 2 insertions(+), 0 deletions(-)

Signature · 2 lines

Mihai Lindner
Yocto Project

Bruce Ashfield

2012-09-19 19:02 UTC #10 lore raw

Quoted 33 lines · Mihai Lindner

Quoted 32 lines · Bruce Ashfield
Quoted 18 lines · Mihai Lindner
Quoted 17 lines · Tom Zanussi
Quoted 16 lines · Mihai Lindner
Quoted 14 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?

Quoted 7 lines

Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why. base.cfg is not included, nor stanadrd.cfg it seems.
The list of included cfg files is way to short.

That likely means the BSP .scc file is missing and update (i.e. does
it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.

I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?

Bruce

Quoted 61 lines

--Mihai
Quoted 57 lines
Quoted 54 lines
Quoted 52 lines
Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
     meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

Mihai Lindner

author

2012-09-19 19:39 UTC #11 lore raw

Quoted 42 lines · Bruce Ashfield

Quoted 33 lines · Mihai Lindner
Quoted 32 lines · Bruce Ashfield
Quoted 18 lines · Mihai Lindner
Quoted 17 lines · Tom Zanussi
Quoted 16 lines · Mihai Lindner
Quoted 14 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 7 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why. base.cfg is not included, nor stanadrd.cfg it seems.
The list of included cfg files is way to short.

Quoted 8 lines

That likely means the BSP .scc file is missing and update (i.e. does
it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce

In meta/top_tgt i have:

/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc

I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:

./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17: standard_5b57715386592f694588063dd3ec6ebb: command not found

After this the scripts stops.

Mihai

Quoted 65 lines

Quoted 62 lines
--Mihai
Quoted 57 lines
Quoted 54 lines
Quoted 52 lines
Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
     meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

Signature · 2 lines

Mihai Lindner
Yocto Project

Bruce Ashfield

2012-09-19 20:22 UTC #12 lore raw

Quoted 53 lines · Mihai Lindner

Quoted 42 lines · Bruce Ashfield
Quoted 33 lines · Mihai Lindner
Quoted 32 lines · Bruce Ashfield
Quoted 18 lines · Mihai Lindner
Quoted 17 lines · Tom Zanussi
Quoted 16 lines · Mihai Lindner
Quoted 14 lines · Tom Zanussi
Quoted 11 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
For cedartrail, at least, standard.cfg is used.
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live. --Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 7 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why. base.cfg is not included, nor stanadrd.cfg it seems.
The list of included cfg files is way to short.
Quoted 8 lines
That likely means the BSP .scc file is missing and update (i.e. does
it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:

Quoted 9 lines

/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17: standard_5b57715386592f694588063dd3ec6ebb: command not found
After this the scripts stops.

Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.

Cheers,

Bruce

Quoted 69 lines

Mihai
Quoted 65 lines
Quoted 62 lines
--Mihai
Quoted 57 lines
Quoted 54 lines
Quoted 52 lines
Tom
Quoted 44 lines
--Mihai
Quoted 40 lines
Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
      meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

Bruce Ashfield

2012-09-19 20:33 UTC #13 lore raw

Quoted 68 lines · Bruce Ashfield

Quoted 67 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 8 lines
Quoted 6 lines
This looks fine to me, and we should consider it for all the repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found

Quoted 7 lines

Quoted 2 lines
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.

I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.

Bruce

Quoted 83 lines

Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Quoted 36 lines
Bruce
Quoted 33 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch.
Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Mihai Lindner

author

2012-09-19 20:55 UTC #14 lore raw

Quoted 77 lines · Bruce Ashfield

Quoted 68 lines · Bruce Ashfield
Quoted 67 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 8 lines
Quoted 6 lines
This looks fine to me, and we should consider it for all the repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
Quoted 7 lines
Quoted 2 lines
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.

Quoted 4 lines

I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce

Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.

--Mihai

Quoted 87 lines

Quoted 84 lines
Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Quoted 36 lines
Bruce
Quoted 33 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch.
Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Signature · 2 lines

Mihai Lindner
Yocto Project

Brian Lloyd

2012-09-19 21:55 UTC #15 lore raw

FYI: I've been using linux-yocto 3.2. After doing a git pull recently, I found both my own BSP and crownbay-noemgd to be miss configured, both for linux-yocto and for xorg.conf, like it couldn't find the configuration files. I think the root problem with files not being found may be a little larger than just the linux-yocto-3.0 bake file. It was a lot of commits grabbed all at once, and I haven't had time to isolate which commit changed the behavior. Restoring a backup of the files from before the pull restored the prior configuration behavior.

Quoted 177 lines · Mihai Lindner

Quoted 77 lines · Bruce Ashfield
Quoted 68 lines · Bruce Ashfield
Quoted 67 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 8 lines
Quoted 6 lines
This looks fine to me, and we should consider it for all the repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
Quoted 7 lines
Quoted 2 lines
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.
Quoted 4 lines
I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce
Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.
--Mihai
Quoted 87 lines
Quoted 84 lines
Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Quoted 36 lines
Bruce
Quoted 33 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0,
meta branch.
Cedartrail (at least) cannot boot live from ISO image due to
BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)"
Should fix #3050
[YOCTO #3050]
Signed-off-by: Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Bruce Ashfield

2012-09-19 23:56 UTC #16 lore raw

In reply to Mihai Lindner

Quoted 78 lines · Mihai Lindner

Quoted 77 lines · Bruce Ashfield
Quoted 75 lines · Bruce Ashfield
Quoted 61 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 8 lines
Quoted 6 lines
This looks fine to me, and we should consider it for all the repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
Quoted 8 lines
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.

Quoted 8 lines

Quoted 4 lines
I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce
Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.

Aha. I was right. It is a tools issue and a interface that changed. I made a fix for this in the 3.0 kernel tree some time ago, but I didn't update the lagging BSPs, and the handoff to a meta-intel change was missed.

With this change (sorry for the linewraps, I'm out of the office):

--git a/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend index 35c4755..212a400 100644

meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend +0 -0

@@ -16,7 +16,7 @@ KBRANCH_cedartrail-nopvr  = "yocto/standard/cedartrail"
 KERNEL_FEATURES_append_cedartrail-nopvr += " cfg/smp.scc"
 
 SRCREV_machine_pn-linux-yocto_cedartrail ?=

"1e79e03d115ed177882ab53909a4f3555e434833" -SRCREV_meta_pn-linux-yocto_cedartrail ?= "46e8fc2bbbe73514e8d99101adaaa373f760ffa7" +SRCREV_meta_pn-linux-yocto_cedartrail ?= "bf5ee4945ee6d748e6abe16356f2357f76b5e2f0"
SRCREV_pvr_pn-linux-yocto_cedartrail ?=
"997f5644664b31ebefd6e16c451c4a3729eb378a"

SRCREV_machine_pn-linux-yocto_cedartrail-nopvr ?=
"1e79e03d115ed177882ab53909a4f3555e434833"

i.e. bump the META srcrev and everything is properly configured. Tom or Darren .. or someone else can make the change permanently in meta-intel/meta-cedartrail.

Cheers,

Bruce

Quoted 91 lines

--Mihai
Quoted 87 lines
Quoted 84 lines
Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Quoted 36 lines
Bruce
Quoted 33 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0,
meta branch.
Cedartrail (at least) cannot boot live from ISO image due to
BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)"
Should fix #3050
[YOCTO #3050]
Signed-off-by: Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Tom Zanussi

2012-09-20 02:38 UTC #17 lore raw

Quoted 112 lines · Bruce Ashfield

Quoted 78 lines · Mihai Lindner
Quoted 77 lines · Bruce Ashfield
Quoted 75 lines · Bruce Ashfield
Quoted 61 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
On 12-09-18 01:59 AM, Mihai Lindner wrote:
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 8 lines
Quoted 6 lines
This looks fine to me, and we should consider it for all the
repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
Quoted 8 lines
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.
Quoted 8 lines
Quoted 4 lines
I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce
Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.
Aha. I was right. It is a tools issue and a interface that changed. I made a fix for this in the 3.0 kernel tree some time ago, but I didn't update the lagging BSPs, and the handoff to a meta-intel change was missed.
With this change (sorry for the linewraps, I'm out of the office):
--git a/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend index 35c4755..212a400 100644
meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend +0 -0
@@ -16,7 +16,7 @@ KBRANCH_cedartrail-nopvr  = "yocto/standard/cedartrail"
  KERNEL_FEATURES_append_cedartrail-nopvr += " cfg/smp.scc"
 
  SRCREV_machine_pn-linux-yocto_cedartrail ?= 
"1e79e03d115ed177882ab53909a4f3555e434833"
-SRCREV_meta_pn-linux-yocto_cedartrail ?=
"46e8fc2bbbe73514e8d99101adaaa373f760ffa7"
+SRCREV_meta_pn-linux-yocto_cedartrail ?=
"bf5ee4945ee6d748e6abe16356f2357f76b5e2f0"
SRCREV_pvr_pn-linux-yocto_cedartrail ?=
"997f5644664b31ebefd6e16c451c4a3729eb378a"

Quoted 7 lines

SRCREV_machine_pn-linux-yocto_cedartrail-nopvr ?=
"1e79e03d115ed177882ab53909a4f3555e434833"
i.e. bump the META srcrev and everything is properly configured. Tom or Darren .. or someone else can make the change permanently in meta-intel/meta-cedartrail.

Fix pushed to meta-intel/master, thanks, Bruce.

Rahul, Kishore, could you please verify the fix and check whether there might be other SRCREV updates lurking?

Tom

Quoted 99 lines

Cheers,
Bruce
Quoted 91 lines
--Mihai
Quoted 87 lines
Quoted 84 lines
Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Quoted 36 lines
Bruce
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0,
meta branch.
Cedartrail (at least) cannot boot live from ISO image due to
BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)"
Should fix #3050
[YOCTO #3050]
Signed-off-by: Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Mihai Lindner

author

2012-09-20 10:03 UTC #18 lore raw

Quoted 123 lines · Tom Zanussi

Quoted 112 lines · Bruce Ashfield
Quoted 78 lines · Mihai Lindner
Quoted 77 lines · Bruce Ashfield
Quoted 75 lines · Bruce Ashfield
Quoted 61 lines · Mihai Lindner
Quoted 45 lines · Bruce Ashfield
Quoted 35 lines · Mihai Lindner
Quoted 34 lines · Bruce Ashfield
Quoted 22 lines · Mihai Lindner
Quoted 21 lines · Tom Zanussi
Quoted 19 lines · Mihai Lindner
Quoted 15 lines · Tom Zanussi
On Tue, 2012-09-18 at 08:21 -0400, Bruce Ashfield wrote:
On 12-09-18 01:59 AM, Mihai Lindner wrote:
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
This looks fine to me, and we should consider it for all the
repositories,
not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why.
base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto-3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d115ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/bsp/cedartrail/cedartrail-standard.scc
Quoted 8 lines
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.
Quoted 8 lines
Quoted 4 lines
I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce
Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.
Aha. I was right. It is a tools issue and a interface that changed. I made a fix for this in the 3.0 kernel tree some time ago, but I didn't update the lagging BSPs, and the handoff to a meta-intel change was missed.
With this change (sorry for the linewraps, I'm out of the office):
--git a/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend index 35c4755..212a400 100644
meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend +0 -0
@@ -16,7 +16,7 @@ KBRANCH_cedartrail-nopvr  = "yocto/standard/cedartrail"
  KERNEL_FEATURES_append_cedartrail-nopvr += " cfg/smp.scc"
 
  SRCREV_machine_pn-linux-yocto_cedartrail ?= 
"1e79e03d115ed177882ab53909a4f3555e434833"
-SRCREV_meta_pn-linux-yocto_cedartrail ?=
"46e8fc2bbbe73514e8d99101adaaa373f760ffa7"
+SRCREV_meta_pn-linux-yocto_cedartrail ?=
"bf5ee4945ee6d748e6abe16356f2357f76b5e2f0"
SRCREV_pvr_pn-linux-yocto_cedartrail ?=
"997f5644664b31ebefd6e16c451c4a3729eb378a"
Quoted 7 lines
SRCREV_machine_pn-linux-yocto_cedartrail-nopvr ?=
"1e79e03d115ed177882ab53909a4f3555e434833"
i.e. bump the META srcrev and everything is properly configured. Tom or Darren .. or someone else can make the change permanently in meta-intel/meta-cedartrail.
Fix pushed to meta-intel/master, thanks, Bruce.

Quoted 108 lines

Rahul, Kishore, could you please verify the fix and check whether there might be other SRCREV updates lurking?
Tom
Quoted 99 lines
Cheers,
Bruce
Quoted 91 lines
--Mihai
Quoted 87 lines
Quoted 84 lines
Cheers,
Bruce
Quoted 72 lines
Mihai
Quoted 68 lines
Quoted 65 lines
--Mihai
Quoted 60 lines
Quoted 57 lines
Quoted 55 lines
Tom
Quoted 47 lines
--Mihai
Quoted 43 lines
Tom
Bruce
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0,
meta branch.
Cedartrail (at least) cannot boot live from ISO image due to
BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)"
Should fix #3050
[YOCTO #3050]
Signed-off-by: Mihai Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Successfully booted a freshly baked image.
Thanks.
Verified :)

Signature · 2 lines

Mihai Lindner
Yocto Project

Saxena, Rahul

2012-09-20 16:26 UTC #19 lore raw

In reply to Tom Zanussi

-----Original Message-----
From: Zanussi, Tom
Sent: Wednesday, September 19, 2012 7:38 PM
To: Bruce Ashfield
Cc: Mihai Lindner; Development list for the linux-yocto*.git Linux kernel repositories; [email protected]; Darren Hart; Bodke, Kishore K; Saxena, Rahul
Subject: Re: [linux-yocto] [yocto] [PATCH 0/1] [linux-yocto-3.0] boot-live.cfg: enable BLK_DEV_INITRD in kernel

Quoted 114 lines · Bruce Ashfield

Quoted 80 lines · Mihai Lindner
Quoted 79 lines · Bruce Ashfield
Quoted 77 lines · Bruce Ashfield
Quoted 63 lines · Mihai Lindner
Quoted 44 lines · Bruce Ashfield
Quoted 34 lines · Mihai Lindner
Quoted 33 lines · Bruce Ashfield
Quoted 21 lines · Mihai Lindner
Quoted 20 lines · Tom Zanussi
Quoted 18 lines · Mihai Lindner
Quoted 7 lines · Tom Zanussi
Quoted 6 lines · Bruce Ashfield
On 12-09-18 01:59 AM, Mihai Lindner wrote:
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.
Quoted 7 lines
Quoted 5 lines
This looks fine to me, and we should consider it for all
the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?
For cedartrail, at least, standard.cfg is used.
Quoted 6 lines
Quoted 2 lines
And standard inherits from base, so it should be turned on. Somehow it's getting turned off in cedartrail...
Yes, it the final .config file is turned off. Solved it by setting it in boot-live.
--Mihai
To follow up on this, is someone taking a closer look at this config to see if we can get a root cause for that option being disabled for this board ?
Quoted 8 lines
Quoted 4 lines
I won't be able to poke at it myself for another day or so.
Bruce
I'm still digging on this, trying to figure out what cfg files are included / omitted by configme and why. base.cfg is not included, nor stanadrd.cfg it seems. The list of included cfg files is way to short.
Quoted 9 lines
That likely means the BSP .scc file is missing and update (i.e. does it still have scc_leaf?) and the tools aren't finding it and auto-generating something to get you up and running.
I just checked the meta branch here, and it looks to be updated, but if you look at your build's linux source dir, what's in meta/top_tgt ?
Bruce
In meta/top_tgt i have:
/home/mihai/cedartrail/tmp/work/cedartrail-poky-linux/linux-yocto -3.0.32+git5+46e8fc2bbbe73514e8d99101adaaa373f760ffa7_1+1e79e03d1 15ed177882ab53909a4f3555e434833-r4.1/linux/meta/cfg/kernel-cache/ bsp/cedartrail/cedartrail-standard.scc
Quoted 8 lines
I've also hit an error, after more verbose runs of ./cedartrail-standard in meta/cfg/scratch/obj/:
./0-cedartrail-standard-897c5c055888aca397b3ab0d7be9e6fa.sco: line 17:
standard_5b57715386592f694588063dd3ec6ebb: command not found
After this the scripts stops.
Aha. This definitely breaks the configuration chain (and would throw a hard error in the 3.4 kernel) and is where the options drop. But this should no way be specific to this board. I'll get something configured here, since I need to see this happen in front of me.
Quoted 8 lines
Quoted 4 lines
I've finally reproduced this. Leave the issue with me and I'll get back to you with a fix.
Bruce
Yay! Thanks.
It's not specific, it's just easier to hit; for cedartrail only 3.0 is available, and also set as preferred.
Aha. I was right. It is a tools issue and a interface that changed. I made a fix for this in the 3.0 kernel tree some time ago, but I didn't update the lagging BSPs, and the handoff to a meta-intel change was missed.
With this change (sorry for the linewraps, I'm out of the office):
--git a/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend b/meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend index 35c4755..212a400 100644
meta-cedartrail/recipes-kernel/linux/linux-yocto_3.0.bbappend +0 -0
@@ -16,7 +16,7 @@ KBRANCH_cedartrail-nopvr  = "yocto/standard/cedartrail"
  KERNEL_FEATURES_append_cedartrail-nopvr += " cfg/smp.scc"
 
  SRCREV_machine_pn-linux-yocto_cedartrail ?= 
"1e79e03d115ed177882ab53909a4f3555e434833"
-SRCREV_meta_pn-linux-yocto_cedartrail ?=
"46e8fc2bbbe73514e8d99101adaaa373f760ffa7"
+SRCREV_meta_pn-linux-yocto_cedartrail ?=
"bf5ee4945ee6d748e6abe16356f2357f76b5e2f0"
SRCREV_pvr_pn-linux-yocto_cedartrail ?=
"997f5644664b31ebefd6e16c451c4a3729eb378a"

Quoted 7 lines

SRCREV_machine_pn-linux-yocto_cedartrail-nopvr ?=
"1e79e03d115ed177882ab53909a4f3555e434833"
i.e. bump the META srcrev and everything is properly configured. Tom or Darren .. or someone else can make the change permanently in meta-intel/meta-cedartrail.

Fix pushed to meta-intel/master, thanks, Bruce.

Rahul, Kishore, could you please verify the fix and check whether there might be other SRCREV updates lurking?

Tom

Quoted 101 lines

Cheers,
Bruce
Quoted 93 lines
--Mihai
Quoted 89 lines
Quoted 86 lines
Cheers,
Bruce
Quoted 74 lines
Mihai
Quoted 70 lines
Quoted 67 lines
--Mihai
Quoted 62 lines
Quoted 59 lines
Quoted 57 lines
Tom
Quoted 49 lines
--Mihai
Quoted 45 lines
Tom
Quoted 38 lines
Bruce
Added BLK_DEV_INITRD in boot-live.cfg for
linux-yocto-3.0, meta branch.
Cedartrail (at least) cannot boot live from ISO image
due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)"
Should fix #3050
[YOCTO #3050]
Signed-off-by: Mihai
Lindner<[email protected]>
---
The following changes since commit
bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
meta: rename virto.scc to virtio.scc (2012-08-18
22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib
mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
meta/cfg/kernel-cache/cfg/boot-live.cfg | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
linux-yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/linux-yocto

Yes, I was able to now successfully boot my cedartrail image.
Thanks to all who worked on resolving this !

Rahul

Bruce Ashfield

2012-09-18 14:17 UTC #20 lore raw

In reply to Tom Zanussi

Quoted 7 lines · Tom Zanussi

Quoted 6 lines · Bruce Ashfield
Quoted 2 lines · Mihai Lindner
Please pull into linux-yocto-3.0, meta.
Adding linux-yocto, Darren and Tom.

Quoted 7 lines

Quoted 5 lines
This looks fine to me, and we should consider it for all the repositories, not just 3.0.
Tom/Darren. Any side effects you can think of for this change ?
No, but shouldn't it already be there, inherited from base.cfg?

Right you are. This is already in the inherited configs.

Bruce

Quoted 42 lines

Tom
Quoted 33 lines
Bruce
Quoted 30 lines
Added BLK_DEV_INITRD in boot-live.cfg for linux-yocto-3.0, meta branch. Cedartrail (at least) cannot boot live from ISO image due to BLK_DEV_INITRD missing:
"VFS: Cannot open root device "ram0" or unkown-block(0,0)" Should fix #3050
[YOCTO #3050]
Signed-off-by Mihai Lindner<[email protected]>
---
The following changes since commit bf5ee4945ee6d748e6abe16356f2357f76b5e2f0:
   meta: rename virto.scc to virtio.scc (2012-08-18 22:09:35 -0400)
are available in the git repository at:
git://git.yoctoproject.org/poky-contrib mihai/linux-yocto-3.0/meta
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
Mihai Lindner (1):
boot-live.cfg: enable BLK_DEV_INITRD in kernel
  meta/cfg/kernel-cache/cfg/boot-live.cfg |    2 ++
  1 files changed, 2 insertions(+), 0 deletions(-)
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

Signature · 2 lines

"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"