HID: sensors: remove some unneeded checks
Subsystems (3)
PATCH 2/2 HID: sensors: remove some unneeded checks
"report_id" is unsigned so it's never less than zero. These checks can be removed without any problem.
drivers/hid/hid-sensor-hub.c +0 -9
@@ -214,9 +214,6 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT );if (!report || (field_index >= report->maxfield)) {
@@ -241,9 +238,6 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT );if (!report || (field_index >= report->maxfield)) {
@@ -271,9 +265,6 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,struct hid_report *report;int ret_val =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex);memset (&data->pending,0 ,sizeof (data->pending));init_completion (&data->pending.ready);
Quoted 4 lines · Dan Carpenter
"
report_id" is unsigned so it's never less than zero. These checks can be removed without any problem.Signed-off-by Dan Carpenter <[email protected]>
Adding Jonathan to CC as well. Thanks.
Quoted 36 lines
drivers/hid/hid-sensor-hub.c +0
-9@@ -214,9 +214,6 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT );if (!report || (field_index >= report->maxfield)) {@@ -241,9 +238,6 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT );if (!report || (field_index >= report->maxfield)) {@@ -271,9 +265,6 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,struct hid_report *report;int ret_val =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex);memset (&data->pending,0 ,sizeof (data->pending));init_completion (&data->pending.ready);
Signature · 2 lines
Jiri Kosina SUSE Labs
Tested this and it works.
-----Original Message-----
From: Jiri Kosina [mailto:[email protected]]
Sent: Monday, September 17, 2012 4:00 AM
To: Dan Carpenter
Cc: Pandruvada, Srinivas; [email protected]; [email protected]; Jonathan Cameron
Subject: Re: [patch 2/2] HID: sensors: remove some unneeded checks
Quoted 4 lines · Dan Carpenter
"
report_id" is unsigned so it's never less than zero. These checks can be removed without any problem.Signed-off-by Dan Carpenter <[email protected]>
Adding Jonathan to CC as well. Thanks.
Quoted 26 lines
(quoted diff) +0
-0
b/drivers/hid/hid-sensor-hub.cindex 0c93b10..22ec3c6 100644drivers/hid/hid-sensor-hub.c +1
-6@@ -214,9 +214,6 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT ); if (!report || (field_index >= report->maxfield)) { @@ -241,9 +238,6 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT ); if (!report || (field_index >= report->maxfield)) { @@ -271,9
drivers/hid/hid-sensor-hub.c int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
Quoted 10 lines
drivers/hid/hid-sensor-hub.c +1
-3+265,6 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, struct hid_report *report;int ret_val =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex);memset (&data->pending,0 ,sizeof (data->pending));init_completion (&data->pending.ready);
--
Jiri Kosina
SUSE Labs
Jonathan Cameron
maintainerI've add these both to the togreg branch of
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git
Will send onwards in a few days.
Quoted 61 lines
Tested this and it works.
-----Original Message-----
From: Jiri Kosina [mailto:[email protected]]
Sent: Monday, September 17, 2012 4:00 AM
To: Dan Carpenter
Cc: Pandruvada, Srinivas; [email protected]; [email protected]; Jonathan Cameron
Subject: Re: [patch 2/2] HID: sensors: remove some unneeded checksQuoted 4 lines · Dan Carpenter
"
report_id" is unsigned so it's never less than zero. These checks can be removed without any problem.Signed-off-by Dan Carpenter <[email protected]>Signed-off-by Jiri Kosina <[email protected]>Adding Jonathan to CC as well. Thanks.
Quoted 26 lines
(quoted diff) +0
-0
b/drivers/hid/hid-sensor-hub.cindex 0c93b10..22ec3c6 100644drivers/hid/hid-sensor-hub.c +1
-6@@ -214,9 +214,6 @@ int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,struct sensor_hub_data *data =hid_get_drvdata (hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT ); if (!report || (field_index >= report->maxfield)) { @@ -241,9 +238,6 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);int ret =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex); report =sensor_hub_report (report_id, hsdev->hdev,HID_FEATURE_REPORT ); if (!report || (field_index >= report->maxfield)) { @@ -271,9drivers/hid/hid-sensor-hub.c int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
Quoted 10 lines
drivers/hid/hid-sensor-hub.c +1
-3+265,6 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, struct hid_report *report;int ret_val =0 ; -if (report_id <0 ) -return -EINVAL ; -mutex_lock (&data->mutex);memset (&data->pending,0 ,sizeof (data->pending));init_completion (&data->pending.ready);--
Jiri Kosina
SUSE Labs