Skip to contentSkip to conversation

block: bdrv_reopen() patches

PATCH Applied Jeff Cody 3 participants 26 messages Sep 20, 2012 – Sep 21, 2012 Block layer

lore
Share & tools
lore

Jeff Cody

author
#0 lore raw

v4 cover block: bdrv_reopen() patches

These patches are based off Supriya Kannery's original bdrv_reopen() patches as part of the hostcache series.

This provides support for safe reopen of a single image, or transactional reopening of multiple images atomically.

These changes are all reflected in my github repo:

git://github.com/codyprime/qemu-kvm-jtc.git branch: jtc-live-commit-1.3-v7

Changes from v3 -> v4:
==========================

Compiled with gcc 4.7.0 (F17) and 4.4.6 (RHEL6); previously I only compiled under F17.

Patch 03/19: [Kevin] Removed the typedef from qemu-common, so it compiles on
earlier gcc versions
Patch 04/19: [Kevin] Check return value of raw_set_aio()
Patch 09/19: [Eric] Add additional conditionals for CONFIG_LINUX_AIO and
F_DUPFD_CLOEXEC, and fix typo
[Kevin] Assign s->aio_ctx directly instead of via
BDRVRawReopenState

Changes from v2 -> v3:
==========================

Patch 03/19: [Paolo] BlockReopenQueue is now only passed to the _prepare
functions.
Patch 06/19: [Kevin, Paolo] New. Purge imporper usage of BDRV_O_CACHE_WB. Patch 07/19: [Paolo] New. Use BDRV_O_NOCACHE instead of align_buf. Patch 08/19: [Paolo] New. Purge aligned_buf and aligned_buf_size. Patch 09/19: [Paolo] reopen no longer uses aligned_buf. BlockReopenQueue is
now passed only to the _prepare() functions.
Patch 10/19 - 14/19: [Paolo] Removed unneeded _commit() and _abort() stubs Patch 15/19: [Paolo] BlockReopenQueue is now only passed to the _prepare
functions.
Patch 16/19: [Paolo] New. Support new image format.
Patch 17/19: [Paolo] New. Support new image format.

Changes from v1 -> v2:
==========================

Patch 01/16: None

Patch 02/16: New patch

Patch 03/16: [Kevin] Use QSIMPLEQ_FOREACH_SAFE
[Kevin] Use BDRV_O_ALLOW_RDWR flag instead of keep_read_only [Kevin] Preserve error on failure of bdrv_flush() [Kevin] bdrv_reopen_prepare() no longer calls bdrv_reopen_abort() [Kevin] Directly embed BDRVReopenState field in
BlockReopenQueueEntry, rather than by reference
[Jeff] Add BlockReopenQueue field to the BDRVReopenState struct

Feedback not incorporated:
--------------------------
[Kevin] Sharing 3 of the BDS flag setting lines with bdrv_open().
I didn't see a great way of doing this.

Patch 04/16: New patch, aio init code motion

Patch 05/16: [Kevin] New patch, raw_parse_flags code motion

Patch 06/16: [Kevin] New patch. Do not parse BDRV_O_CACHE_WB in

                     raw_posix/raw_win32

Patch 07/16: [Kevin] New patch. Code motion - move aligned_buf allocation
to helper function.

Patch 08/16: [Kevin] See patches 4-7
[Kevin] Init AIO, if appropriate [Kevin] Fallback to qemu_open, if fcntl fails [Eric] Remove spurious mode in qemu_open() [Corey] Use qemu_close() instead of qemu_open()

Feedback not incorporated:
--------------------------
Moving from fcntl + fcntl_setfl to qemu_dup_flags or equivalent. Ideally I think a separate patch series creating a wrapper function for fcntl, and then update this code with the new wrapper.

Patch 09/16: None
Patch 10/16: None
Patch 11/16: None
Patch 12/16: None

Patch 13/16: New patch, VMDK driver for reopen

Patch 14/16: New patch, raw-win32 driver for reopen. Note, not necessarily
safe. If anyone knows a better way to do it under win32, without potentially having to close the handle first, please let me know.

Patch 15/16: New patch, move bdrv_commit to use bdrv_reopen()

Patch 16/16: [Kevin] Get rid of keep_read_only flag completely

Jeff Cody (19):
block: correctly set the keep_read_only flag
block: make bdrv_set_enable_write_cache() modify open_flags
block: Framework for reopening files safely
block: move aio initialization into a helper function
block: move open flag parsing in raw block drivers to helper
functions
block: do not parse BDRV_O_CACHE_WB in block drivers
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: raw-posix image file reopen
block: raw image file reopen
block: qed image file reopen
block: qcow2 image file reopen
block: qcow image file reopen
block: vmdk image file reopen
block: raw-win32 driver reopen support
block: vdi image file reopen
block: vpc image file reopen
block: convert bdrv_commit() to use bdrv_reopen()
block: remove keep_read_only flag from BlockDriverState struct

 block.c           | 299 +++++++++++++++++++++++++++++++++++++++++++++---------
 block.h           |  18 ++++
 block/iscsi.c     |   4 -
 block/qcow.c      |  10 ++
 block/qcow2.c     |  10 ++
 block/qed.c       |   9 ++
 block/raw-posix.c | 225 ++++++++++++++++++++++++++++++----------
 block/raw-win32.c | 145 ++++++++++++++++++++++----
 block/raw.c       |  10 ++
 block/rbd.c       |   6 --
 block/sheepdog.c  |  14 ++-
 block/vdi.c       |   7 ++
 block/vmdk.c      |  35 +++++++
 block/vpc.c       |   7 ++
 block_int.h       |   9 +-
 15 files changed, 666 insertions(+), 142 deletions(-)
Signature · 1 line
1.7.11.4
author
#1 lore raw

PATCH v4 1/19 block: correctly set the keep_read_only flag

I believe the bs->keep_read_only flag is supposed to reflect the initial open state of the device. If the device is initially opened R/O, then commit operations, or reopen operations changing to R/W, are prohibited.

Currently, the keep_read_only flag is only accurate for the active layer, and its backing file. Subsequent images end up always having the keep_read_only flag set.

For instance, what happens now:

[ base ] kro = 1, ro = 1

    |
    v
[ snap-1 ]  kro = 1, ro = 1
    |
    v
[ snap-2 ]  kro = 0, ro = 1
    |
    v

[ active ] kro = 0, ro = 0

What we want:

[ base ] kro = 0, ro = 1

    |
    v
[ snap-1 ]  kro = 0, ro = 1
    |
    v
[ snap-2 ]  kro = 0, ro = 1
    |
    v

[ active ] kro = 0, ro = 0

---
 block.c | 14 +++++++-------
 block.h |  1 +
 2 files changed, 8 insertions(+), 7 deletions(-)
block.c +7 -7
index e78039b..4c0e7f5 100644
@@ -668,7 +668,7 @@ static int bdrv_open_common(BlockDriverState *bs, const char *filename,
         open_flags |= BDRV_O_RDWR;
     }
 
-    bs->keep_read_only = bs->read_only = !(open_flags & BDRV_O_RDWR);
+    bs->read_only = !(open_flags & BDRV_O_RDWR);
 
     /* Open the image, either directly or using a protocol */
     if (drv->bdrv_file_open) {
@@ -808,6 +808,12 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
         goto unlink_and_fail;
     }
 
+    if (flags & BDRV_O_RDWR) {
+        flags |= BDRV_O_ALLOW_RDWR;
+    }
+
+    bs->keep_read_only = !(flags & BDRV_O_ALLOW_RDWR);
+
     /* Open the image */
     ret = bdrv_open_common(bs, filename, flags, drv);
     if (ret < 0) {
@@ -837,12 +843,6 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
             bdrv_close(bs);
             return ret;
         }
-        if (bs->is_temporary) {
-            bs->backing_hd->keep_read_only = !(flags & BDRV_O_RDWR);
-        } else {
-            /* base image inherits from "parent" */
-            bs->backing_hd->keep_read_only = bs->keep_read_only;
-        }
     }
 
     if (!bdrv_key_required(bs)) {
block.h +1 -0
index 2e2be11..4d919c2 100644
@@ -80,6 +80,7 @@ typedef struct BlockDevOps {
 #define BDRV_O_COPY_ON_READ 0x0400 /* copy read backing sectors into image */
 #define BDRV_O_INCOMING    0x0800  /* consistency hint for incoming migration */
 #define BDRV_O_CHECK       0x1000  /* open solely for consistency check */
+#define BDRV_O_ALLOW_RDWR  0x2000  /* allow reopen to change from r/o to r/w */
 
 #define BDRV_O_CACHE_MASK  (BDRV_O_NOCACHE | BDRV_O_CACHE_WB | BDRV_O_NO_FLUSH)
 
Signature · 1 line
1.7.11.4
author
#2 lore raw

PATCH v4 2/19 block: make bdrv_set_enable_write_cache() modify open_flags

In reply to Jeff Cody

bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag, but without the flag recorded in bs->open_flags, then next time a reopen() is performed the enable_write_cache setting may be inadvertently lost.

This will set the flag in open_flags, so it is preserved across reopens.

---
 block.c | 7 +++++++
 1 file changed, 7 insertions(+)
block.c +7 -0
index 4c0e7f5..458bcc9 100644
@@ -2168,6 +2168,13 @@ int bdrv_enable_write_cache(BlockDriverState *bs)
 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
 {
     bs->enable_write_cache = wce;
+
+    /* so a reopen() will preserve wce */
+    if (wce) {
+        bs->open_flags |= BDRV_O_CACHE_WB;
+    } else {
+        bs->open_flags &= ~BDRV_O_CACHE_WB;
+    }
 }
 
 int bdrv_is_encrypted(BlockDriverState *bs)
Signature · 1 line
1.7.11.4
author
#3 lore raw

PATCH v4 3/19 block: Framework for reopening files safely

In reply to Jeff Cody

This is based on Supriya Kannery's bdrv_reopen() patch series.

This provides a transactional method to reopen multiple images files safely.

Image files are queue for reopen via bdrv_reopen_queue(), and the reopen occurs when bdrv_reopen_multiple() is called. Changes are staged in bdrv_reopen_prepare() and in the equivalent driver level functions. If any of the staged images fails a prepare, then all of the images left untouched, and the staged changes for each image abandoned.

Block drivers are passed a reopen state structure, that contains:
* BDS to reopen
* flags for the reopen
* opaque pointer for any driver-specific data that needs to be persistent from _prepare to _commit/_abort
* reopen queue pointer, if the driver needs to queue additional BDS for a reopen

---
 block.c     | 232 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 block.h     |  17 +++++
 block_int.h |   8 +++
 3 files changed, 257 insertions(+)
block.c +232 -0
index 458bcc9..c7c1a3b 100644
@@ -863,6 +863,238 @@ unlink_and_fail:
     return ret;
 }
 
+typedef struct BlockReopenQueueEntry {
+     bool prepared;
+     BDRVReopenState state;
+     QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
+} BlockReopenQueueEntry;
+
+/*
+ * Adds a BlockDriverState to a simple queue for an atomic, transactional
+ * reopen of multiple devices.
+ *
+ * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
+ * already performed, or alternatively may be NULL a new BlockReopenQueue will
+ * be created and initialized. This newly created BlockReopenQueue should be
+ * passed back in for subsequent calls that are intended to be of the same
+ * atomic 'set'.
+ *
+ * bs is the BlockDriverState to add to the reopen queue.
+ *
+ * flags contains the open flags for the associated bs
+ *
+ * returns a pointer to bs_queue, which is either the newly allocated
+ * bs_queue, or the existing bs_queue being used.
+ *
+ */
+BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
+                                    BlockDriverState *bs, int flags)
+{
+    assert(bs != NULL);
+
+    BlockReopenQueueEntry *bs_entry;
+    if (bs_queue == NULL) {
+        bs_queue = g_new0(BlockReopenQueue, 1);
+        QSIMPLEQ_INIT(bs_queue);
+    }
+
+    if (bs->file) {
+        bdrv_reopen_queue(bs_queue, bs->file, flags);
+    }
+
+    bs_entry = g_new0(BlockReopenQueueEntry, 1);
+    QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
+
+    bs_entry->state.bs = bs;
+    bs_entry->state.flags = flags;
+
+    return bs_queue;
+}
+
+/*
+ * Reopen multiple BlockDriverStates atomically & transactionally.
+ *
+ * The queue passed in (bs_queue) must have been built up previous
+ * via bdrv_reopen_queue().
+ *
+ * Reopens all BDS specified in the queue, with the appropriate
+ * flags.  All devices are prepared for reopen, and failure of any
+ * device will cause all device changes to be abandonded, and intermediate
+ * data cleaned up.
+ *
+ * If all devices prepare successfully, then the changes are committed
+ * to all devices.
+ *
+ */
+int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
+{
+    int ret = -1;
+    BlockReopenQueueEntry *bs_entry, *next;
+    Error *local_err = NULL;
+
+    assert(bs_queue != NULL);
+
+    bdrv_drain_all();
+
+    QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
+        if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
+            error_propagate(errp, local_err);
+            goto cleanup;
+        }
+        bs_entry->prepared = true;
+    }
+
+    /* If we reach this point, we have success and just need to apply the
+     * changes
+     */
+    QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
+        bdrv_reopen_commit(&bs_entry->state);
+    }
+
+    ret = 0;
+
+cleanup:
+    QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
+        if (ret && bs_entry->prepared) {
+            bdrv_reopen_abort(&bs_entry->state);
+        }
+        g_free(bs_entry);
+    }
+    g_free(bs_queue);
+    return ret;
+}
+
+
+/* Reopen a single BlockDriverState with the specified flags. */
+int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
+{
+    int ret = -1;
+    Error *local_err = NULL;
+    BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
+
+    ret = bdrv_reopen_multiple(queue, &local_err);
+    if (local_err != NULL) {
+        error_propagate(errp, local_err);
+    }
+    return ret;
+}
+
+
+/*
+ * Prepares a BlockDriverState for reopen. All changes are staged in the
+ * 'opaque' field of the BDRVReopenState, which is used and allocated by
+ * the block driver layer .bdrv_reopen_prepare()
+ *
+ * bs is the BlockDriverState to reopen
+ * flags are the new open flags
+ * queue is the reopen queue
+ *
+ * Returns 0 on success, non-zero on error.  On error errp will be set
+ * as well.
+ *
+ * On failure, bdrv_reopen_abort() will be called to clean up any data.
+ * It is the responsibility of the caller to then call the abort() or
+ * commit() for any other BDS that have been left in a prepare() state
+ *
+ */
+int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
+                        Error **errp)
+{
+    int ret = -1;
+    Error *local_err = NULL;
+    BlockDriver *drv;
+
+    assert(reopen_state != NULL);
+    assert(reopen_state->bs->drv != NULL);
+    drv = reopen_state->bs->drv;
+
+    /* if we are to stay read-only, do not allow permission change
+     * to r/w */
+    if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
+        reopen_state->flags & BDRV_O_RDWR) {
+        error_set(errp, QERR_DEVICE_IS_READ_ONLY,
+                  reopen_state->bs->device_name);
+        goto error;
+    }
+
+
+    ret = bdrv_flush(reopen_state->bs);
+    if (ret) {
+        error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
+                  strerror(-ret));
+        goto error;
+    }
+
+    if (drv->bdrv_reopen_prepare) {
+        ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
+        if (ret) {
+            if (local_err != NULL) {
+                error_propagate(errp, local_err);
+            } else {
+                error_set(errp, QERR_OPEN_FILE_FAILED,
+                          reopen_state->bs->filename);
+            }
+            goto error;
+        }
+    } else {
+        /* It is currently mandatory to have a bdrv_reopen_prepare()
+         * handler for each supported drv. */
+        error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
+                  drv->format_name, reopen_state->bs->device_name,
+                 "reopening of file");
+        ret = -1;
+        goto error;
+    }
+
+    ret = 0;
+
+error:
+    return ret;
+}
+
+/*
+ * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
+ * makes them final by swapping the staging BlockDriverState contents into
+ * the active BlockDriverState contents.
+ */
+void bdrv_reopen_commit(BDRVReopenState *reopen_state)
+{
+    BlockDriver *drv;
+
+    assert(reopen_state != NULL);
+    drv = reopen_state->bs->drv;
+    assert(drv != NULL);
+
+    /* If there are any driver level actions to take */
+    if (drv->bdrv_reopen_commit) {
+        drv->bdrv_reopen_commit(reopen_state);
+    }
+
+    /* set BDS specific flags now */
+    reopen_state->bs->open_flags         = reopen_state->flags;
+    reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
+                                              BDRV_O_CACHE_WB);
+    reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
+}
+
+/*
+ * Abort the reopen, and delete and free the staged changes in
+ * reopen_state
+ */
+void bdrv_reopen_abort(BDRVReopenState *reopen_state)
+{
+    BlockDriver *drv;
+
+    assert(reopen_state != NULL);
+    drv = reopen_state->bs->drv;
+    assert(drv != NULL);
+
+    if (drv->bdrv_reopen_abort) {
+        drv->bdrv_reopen_abort(reopen_state);
+    }
+}
+
+
 void bdrv_close(BlockDriverState *bs)
 {
     bdrv_flush(bs);
block.h +17 -0
index 4d919c2..b1095d8 100644
@@ -97,6 +97,15 @@ typedef enum {
     BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
 } BlockQMPEventAction;
 
+typedef QSIMPLEQ_HEAD(BlockReopenQueue, BlockReopenQueueEntry) BlockReopenQueue;
+
+typedef struct BDRVReopenState {
+    BlockDriverState *bs;
+    int flags;
+    void *opaque;
+} BDRVReopenState;
+
+
 void bdrv_iostatus_enable(BlockDriverState *bs);
 void bdrv_iostatus_reset(BlockDriverState *bs);
 void bdrv_iostatus_disable(BlockDriverState *bs);
@@ -131,6 +140,14 @@ int bdrv_parse_cache_flags(const char *mode, int *flags);
 int bdrv_file_open(BlockDriverState **pbs, const char *filename, int flags);
 int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
               BlockDriver *drv);
+BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
+                                    BlockDriverState *bs, int flags);
+int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp);
+int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp);
+int bdrv_reopen_prepare(BDRVReopenState *reopen_state,
+                        BlockReopenQueue *queue, Error **errp);
+void bdrv_reopen_commit(BDRVReopenState *reopen_state);
+void bdrv_reopen_abort(BDRVReopenState *reopen_state);
 void bdrv_close(BlockDriverState *bs);
 int bdrv_attach_dev(BlockDriverState *bs, void *dev);
 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev);
block_int.h +8 -0
index 4452f6f..22b3d93 100644
@@ -139,6 +139,13 @@ struct BlockDriver {
     int instance_size;
     int (*bdrv_probe)(const uint8_t *buf, int buf_size, const char *filename);
     int (*bdrv_probe_device)(const char *filename);
+
+    /* For handling image reopen for split or non-split files */
+    int (*bdrv_reopen_prepare)(BDRVReopenState *reopen_state,
+                               BlockReopenQueue *queue, Error **errp);
+    void (*bdrv_reopen_commit)(BDRVReopenState *reopen_state);
+    void (*bdrv_reopen_abort)(BDRVReopenState *reopen_state);
+
     int (*bdrv_open)(BlockDriverState *bs, int flags);
     int (*bdrv_file_open)(BlockDriverState *bs, const char *filename, int flags);
     int (*bdrv_read)(BlockDriverState *bs, int64_t sector_num,
@@ -336,6 +343,7 @@ struct BlockDriverState {
 
     /* long-running background operation */
     BlockJob *job;
+
 };
 
 int get_tmp_filename(char *filename, int size);
Signature · 1 line
1.7.11.4
author
#4 lore raw

PATCH v4 4/19 block: move aio initialization into a helper function

In reply to Jeff Cody

Move AIO initialization for raw-posix block driver into a helper function.

In addition to just code motion, the aio_ctx pointer is checked for NULL, prior to calling laio_init(), to make sure laio_init() is only run once.

---
 block/raw-posix.c | 53 +++++++++++++++++++++++++++++++++++------------------
 1 file changed, 35 insertions(+), 18 deletions(-)
block/raw-posix.c +35 -18
index 6be20b1..5981d04 100644
@@ -185,6 +185,38 @@ static int raw_normalize_devicepath(const char **filename)
 }
 #endif
 
+#ifdef CONFIG_LINUX_AIO
+static int raw_set_aio(void **aio_ctx, int *use_aio, int bdrv_flags)
+{
+    int ret = -1;
+    assert(aio_ctx != NULL);
+    assert(use_aio != NULL);
+    /*
+     * Currently Linux do AIO only for files opened with O_DIRECT
+     * specified so check NOCACHE flag too
+     */
+    if ((bdrv_flags & (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) ==
+                      (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) {
+
+        /* if non-NULL, laio_init() has already been run */
+        if (*aio_ctx == NULL) {
+            *aio_ctx = laio_init();
+            if (!*aio_ctx) {
+                goto error;
+            }
+        }
+        *use_aio = 1;
+    } else {
+        *use_aio = 0;
+    }
+
+    ret = 0;
+
+error:
+    return ret;
+}
+#endif
+
 static int raw_open_common(BlockDriverState *bs, const char *filename,
                            int bdrv_flags, int open_flags)
 {
@@ -240,25 +272,10 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
     }
 
 #ifdef CONFIG_LINUX_AIO
-    /*
-     * Currently Linux do AIO only for files opened with O_DIRECT
-     * specified so check NOCACHE flag too
-     */
-    if ((bdrv_flags & (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) ==
-                      (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) {
-
-        s->aio_ctx = laio_init();
-        if (!s->aio_ctx) {
-            goto out_free_buf;
-        }
-        s->use_aio = 1;
-    } else
-#endif
-    {
-#ifdef CONFIG_LINUX_AIO
-        s->use_aio = 0;
-#endif
+    if (raw_set_aio(&s->aio_ctx, &s->use_aio, bdrv_flags)) {
+        goto out_close;
     }
+#endif
 
 #ifdef CONFIG_XFS
     if (platform_test_xfs_fd(s->fd)) {
Signature · 1 line
1.7.11.4
#5 lore raw

Re: [Qemu-devel] [PATCH v4 04/19] block: move aio initialization into a helper function

Am 20.09.2012 21:13, schrieb Jeff Cody:

Quoted 29 lines

Move AIO initialization for raw-posix block driver into a helper function.

In addition to just code motion, the aio_ctx pointer is checked for NULL, prior to calling laio_init(), to make sure laio_init() is only run once.

---
 block/raw-posix.c | 53 +++++++++++++++++++++++++++++++++++------------------
 1 file changed, 35 insertions(+), 18 deletions(-)
block/raw-posix.c +0 -10
index 6be20b1..5981d04 100644
@@ -240,25 +272,10 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
     }
 
 #ifdef CONFIG_LINUX_AIO
-    /*
-     * Currently Linux do AIO only for files opened with O_DIRECT
-     * specified so check NOCACHE flag too
-     */
-    if ((bdrv_flags & (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) ==
-                      (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) {
-
-        s->aio_ctx = laio_init();
-        if (!s->aio_ctx) {
-            goto out_free_buf;

block/raw-posix.c static int raw_open_common(BlockDriverState *bs, const char *filename, · line 276

Quoted 10 lines
block/raw-posix.c +2 -8
-        }
-        s->use_aio = 1;
-    } else
-#endif
-    {
-#ifdef CONFIG_LINUX_AIO
-        s->use_aio = 0;
-#endif
+    if (raw_set_aio(&s->aio_ctx, &s->use_aio, bdrv_flags)) {
+        goto out_close;

This leaks s->aligned_buf. It's removed later in the series anyway, so no big deal, but if you need to respin for other reasons, probably worth fixing.

Kevin

author
#6 lore raw

PATCH v4 5/19 block: move open flag parsing in raw block drivers to helper functions

In reply to Jeff Cody

Code motion, to move parsing of open flags into a helper function.

---
 block/raw-posix.c | 38 ++++++++++++++++++++++++--------------
 block/raw-win32.c | 43 +++++++++++++++++++++++--------------------
 2 files changed, 47 insertions(+), 34 deletions(-)
block/raw-posix.c +24 -14
index 5981d04..155205f 100644
@@ -185,6 +185,28 @@ static int raw_normalize_devicepath(const char **filename)
 }
 #endif
 
+static void raw_parse_flags(int bdrv_flags, int *open_flags)
+{
+    assert(open_flags != NULL);
+
+    *open_flags |= O_BINARY;
+    *open_flags &= ~O_ACCMODE;
+    if (bdrv_flags & BDRV_O_RDWR) {
+        *open_flags |= O_RDWR;
+    } else {
+        *open_flags |= O_RDONLY;
+    }
+
+    /* Use O_DSYNC for write-through caching, no flags for write-back caching,
+     * and O_DIRECT for no caching. */
+    if ((bdrv_flags & BDRV_O_NOCACHE)) {
+        *open_flags |= O_DIRECT;
+    }
+    if (!(bdrv_flags & BDRV_O_CACHE_WB)) {
+        *open_flags |= O_DSYNC;
+    }
+}
+
 #ifdef CONFIG_LINUX_AIO
 static int raw_set_aio(void **aio_ctx, int *use_aio, int bdrv_flags)
 {
@@ -228,20 +250,8 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
         return ret;
     }
 
-    s->open_flags = open_flags | O_BINARY;
-    s->open_flags &= ~O_ACCMODE;
-    if (bdrv_flags & BDRV_O_RDWR) {
-        s->open_flags |= O_RDWR;
-    } else {
-        s->open_flags |= O_RDONLY;
-    }
-
-    /* Use O_DSYNC for write-through caching, no flags for write-back caching,
-     * and O_DIRECT for no caching. */
-    if ((bdrv_flags & BDRV_O_NOCACHE))
-        s->open_flags |= O_DIRECT;
-    if (!(bdrv_flags & BDRV_O_CACHE_WB))
-        s->open_flags |= O_DSYNC;
+    s->open_flags = open_flags;
+    raw_parse_flags(bdrv_flags, &s->open_flags);
 
     s->fd = -1;
     fd = qemu_open(filename, s->open_flags, 0644);
block/raw-win32.c +23 -20

64 lines not on this page · raw message

Signature · 1 line
1.7.11.4
author
#7 lore raw

PATCH v4 6/19 block: do not parse BDRV_O_CACHE_WB in block drivers

In reply to Jeff Cody

Block drivers should ignore BDRV_O_CACHE_WB in .bdrv_open flags, and in the bs->open_flags.

This patch removes the code, leaving the behaviour behind as if BDRV_O_CACHE_WB was set.

---
 block/iscsi.c     |  4 ----
 block/raw-posix.c |  3 ---
 block/raw-win32.c |  3 ---
 block/rbd.c       |  6 ------
 block/sheepdog.c  | 14 ++++++--------
 5 files changed, 6 insertions(+), 24 deletions(-)
block/iscsi.c +0 -4
index 0b96165..70cf700 100644
@@ -268,10 +268,6 @@ iscsi_aio_writev(BlockDriverState *bs, int64_t sector_num,
     acb->task->xfer_dir = SCSI_XFER_WRITE;
     acb->task->cdb_size = 16;
     acb->task->cdb[0] = 0x8a;
-    if (!(bs->open_flags & BDRV_O_CACHE_WB)) {
-        /* set FUA on writes when cache mode is write through */
-        acb->task->cdb[1] |= 0x04;
-    }
     lba = sector_qemu2lun(sector_num, iscsilun);
     *(uint32_t *)&acb->task->cdb[2]  = htonl(lba >> 32);
     *(uint32_t *)&acb->task->cdb[6]  = htonl(lba & 0xffffffff);
block/raw-posix.c +0 -3
index 155205f..288e7ff 100644
@@ -202,9 +202,6 @@ static void raw_parse_flags(int bdrv_flags, int *open_flags)
     if ((bdrv_flags & BDRV_O_NOCACHE)) {
         *open_flags |= O_DIRECT;
     }
-    if (!(bdrv_flags & BDRV_O_CACHE_WB)) {
-        *open_flags |= O_DSYNC;
-    }
 }
 
 #ifdef CONFIG_LINUX_AIO
block/raw-win32.c +0 -3
index 335c06a..78c8306 100644
@@ -92,9 +92,6 @@ static void raw_parse_flags(int flags, int *access_flags, DWORD *overlapped)
     if (flags & BDRV_O_NOCACHE) {
         *overlapped |= FILE_FLAG_NO_BUFFERING;
     }
-    if (!(flags & BDRV_O_CACHE_WB)) {
-        *overlapped |= FILE_FLAG_WRITE_THROUGH;
-    }
 }
 
 static int raw_open(BlockDriverState *bs, const char *filename, int flags)
block/rbd.c +0 -6
index 5a0f79f..015a9db 100644
@@ -487,12 +487,6 @@ static int qemu_rbd_open(BlockDriverState *bs, const char *filename, int flags)
         rados_conf_set(s->cluster, "rbd_cache", "false");
     } else {
         rados_conf_set(s->cluster, "rbd_cache", "true");
-        if (!(flags & BDRV_O_CACHE_WB)) {
-            r = rados_conf_set(s->cluster, "rbd_cache_max_dirty", "0");
-            if (r < 0) {
-                rados_conf_set(s->cluster, "rbd_cache", "false");
-            }
-        }
     }
 
     if (strstr(conf, "conf=") == NULL) {
block/sheepdog.c +6 -8
index e0753ee..4742f8a 100644
@@ -1114,14 +1114,12 @@ static int sd_open(BlockDriverState *bs, const char *filename, int flags)
         goto out;
     }
 
-    if (flags & BDRV_O_CACHE_WB) {
-        s->cache_enabled = 1;
-        s->flush_fd = connect_to_sdog(s->addr, s->port);
-        if (s->flush_fd < 0) {
-            error_report("failed to connect");
-            ret = s->flush_fd;
-            goto out;
-        }
+    s->cache_enabled = 1;
+    s->flush_fd = connect_to_sdog(s->addr, s->port);
+    if (s->flush_fd < 0) {
+        error_report("failed to connect");
+        ret = s->flush_fd;
+        goto out;
     }
 
     if (snapid || tag[0] != '\0') {
Signature · 1 line
1.7.11.4
author
#8 lore raw

PATCH v4 7/19 block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c

In reply to Jeff Cody

Rather than check for a non-NULL aligned_buf to determine if raw_aio_submit needs to check for alignment, check for the presence of BDRV_O_NOCACHE in the bs->open_flags.

---
 block/raw-posix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
block/raw-posix.c +1 -1
index 288e7ff..1e727eb 100644
@@ -354,7 +354,7 @@ static BlockDriverAIOCB *raw_aio_submit(BlockDriverState *bs,
      * boundary.  Check if this is the case or tell the low-level
      * driver that it needs to copy the buffer.
      */
-    if (s->aligned_buf) {
+    if ((bs->open_flags & BDRV_O_NOCACHE)) {
         if (!qiov_is_aligned(bs, qiov)) {
             type |= QEMU_AIO_MISALIGNED;
 #ifdef CONFIG_LINUX_AIO
Signature · 1 line
1.7.11.4
author
#9 lore raw

PATCH v4 8/19 block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c

In reply to Jeff Cody

The aligned_buf pointer and aligned_buf size are no longer used in raw_posix.c, so remove all references to them.

---
 block/raw-posix.c | 21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)
block/raw-posix.c +1 -20
index 1e727eb..0ffb3d0 100644
@@ -133,8 +133,6 @@ typedef struct BDRVRawState {
     int use_aio;
     void *aio_ctx;
 #endif
-    uint8_t *aligned_buf;
-    unsigned aligned_buf_size;
 #ifdef CONFIG_XFS
     bool is_xfs : 1;
 #endif
@@ -259,23 +257,10 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
         return ret;
     }
     s->fd = fd;
-    s->aligned_buf = NULL;
-
-    if ((bdrv_flags & BDRV_O_NOCACHE)) {
-        /*
-         * Allocate a buffer for read/modify/write cycles.  Chose the size
-         * pessimistically as we don't know the block size yet.
-         */
-        s->aligned_buf_size = 32 * MAX_BLOCKSIZE;
-        s->aligned_buf = qemu_memalign(MAX_BLOCKSIZE, s->aligned_buf_size);
-        if (s->aligned_buf == NULL) {
-            goto out_close;
-        }
-    }
 
     /* We're falling back to POSIX AIO in some cases so init always */
     if (paio_init() < 0) {
-        goto out_free_buf;
+        goto out_close;
     }
 
 #ifdef CONFIG_LINUX_AIO
@@ -292,8 +277,6 @@ static int raw_open_common(BlockDriverState *bs, const char *filename,
 
     return 0;
 
-out_free_buf:
-    qemu_vfree(s->aligned_buf);
 out_close:
     qemu_close(fd);
     return -errno;
@@ -402,8 +385,6 @@ static void raw_close(BlockDriverState *bs)
     if (s->fd >= 0) {
         qemu_close(s->fd);
         s->fd = -1;
-        if (s->aligned_buf != NULL)
-            qemu_vfree(s->aligned_buf);
     }
 }
 
Signature · 1 line
1.7.11.4
author
#10 lore raw

PATCH v4 9/19 block: raw-posix image file reopen

In reply to Jeff Cody

This is derived from the Supriya Kannery's reopen patches.

This contains the raw-posix driver changes for the bdrv_reopen_* functions. All changes are staged into a temporary scratch buffer during the prepare() stage, and copied over to the live structure during commit(). Upon abort(), all changes are abandoned, and the live structures are unmodified.

The _prepare() will create an extra fd - either by means of a dup, if possible, or opening a new fd if not (for instance, access control changes). Upon _commit(), the original fd is closed and the new fd is used. Upon _abort(), the duplicate/new fd is closed.

---
 block/raw-posix.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)
block/raw-posix.c +114 -0
index 0ffb3d0..28d439f 100644
@@ -138,6 +138,14 @@ typedef struct BDRVRawState {
 #endif
 } BDRVRawState;
 
+typedef struct BDRVRawReopenState {
+    int fd;
+    int open_flags;
+#ifdef CONFIG_LINUX_AIO
+    int use_aio;
+#endif
+} BDRVRawReopenState;
+
 static int fd_open(BlockDriverState *bs);
 static int64_t raw_getlength(BlockDriverState *bs);
 
@@ -290,6 +298,109 @@ static int raw_open(BlockDriverState *bs, const char *filename, int flags)
     return raw_open_common(bs, filename, flags, 0);
 }
 
+static int raw_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue, Error **errp)
+{
+    BDRVRawState *s;
+    BDRVRawReopenState *raw_s;
+    int ret = 0;
+
+    assert(state != NULL);
+    assert(state->bs != NULL);
+
+    s = state->bs->opaque;
+
+    state->opaque = g_malloc0(sizeof(BDRVRawReopenState));
+    raw_s = state->opaque;
+
+#ifdef CONFIG_LINUX_AIO
+    raw_s->use_aio = s->use_aio;
+
+    /* we can use s->aio_ctx instead of a copy, because the use_aio flag is
+     * valid in the 'false' condition even if aio_ctx is set, and raw_set_aio()
+     * won't override aio_ctx if aio_ctx is non-NULL */
+    if (raw_set_aio(&s->aio_ctx, &raw_s->use_aio, state->flags)) {
+        return -1;
+    }
+#endif
+
+    raw_parse_flags(state->flags, &raw_s->open_flags);
+
+    raw_s->fd = -1;
+
+    int fcntl_flags = O_APPEND | O_ASYNC | O_NONBLOCK;
+#ifdef O_NOATIME
+    fcntl_flags |= O_NOATIME;
+#endif
+
+    if ((raw_s->open_flags & ~fcntl_flags) == (s->open_flags & ~fcntl_flags)) {
+        /* dup the original fd */
+        /* TODO: use qemu fcntl wrapper */
+#ifdef F_DUPFD_CLOEXEC
+        raw_s->fd = fcntl(s->fd, F_DUPFD_CLOEXEC, 0);
+#else
+        raw_s->fd = dup(s->fd);
+        if (raw_s->fd != -1) {
+            qemu_set_cloexec(raw_s->fd);
+        }
+#endif
+        if (raw_s->fd >= 0) {
+            ret = fcntl_setfl(raw_s->fd, raw_s->open_flags);
+            if (ret) {
+                qemu_close(raw_s->fd);
+                raw_s->fd = -1;
+            }
+        }
+    }
+
+    /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
+    if (raw_s->fd == -1) {
+        assert(!(raw_s->open_flags & O_CREAT));
+        raw_s->fd = qemu_open(state->bs->filename, raw_s->open_flags);
+        if (raw_s->fd == -1) {
+            ret = -1;
+        }
+    }
+    return ret;
+}
+
+
+static void raw_reopen_commit(BDRVReopenState *state)
+{
+    BDRVRawReopenState *raw_s = state->opaque;
+    BDRVRawState *s = state->bs->opaque;
+
+    s->open_flags = raw_s->open_flags;
+
+    qemu_close(s->fd);
+    s->fd = raw_s->fd;
+#ifdef CONFIG_LINUX_AIO
+    s->use_aio = raw_s->use_aio;
+#endif
+
+    g_free(state->opaque);
+    state->opaque = NULL;
+}
+
+
+static void raw_reopen_abort(BDRVReopenState *state)
+{
+    BDRVRawReopenState *raw_s = state->opaque;
+
+     /* nothing to do if NULL, we didn't get far enough */
+    if (raw_s == NULL) {
+        return;
+    }
+
+    if (raw_s->fd >= 0) {
+        qemu_close(raw_s->fd);
+        raw_s->fd = -1;
+    }
+    g_free(state->opaque);
+    state->opaque = NULL;
+}
+
+
 /* XXX: use host sector size if necessary with:
 #ifdef DIOCGSECTORSIZE
         {
@@ -740,6 +851,9 @@ static BlockDriver bdrv_file = {
     .instance_size = sizeof(BDRVRawState),
     .bdrv_probe = NULL, /* no probe for protocols */
     .bdrv_file_open = raw_open,
+    .bdrv_reopen_prepare = raw_reopen_prepare,
+    .bdrv_reopen_commit = raw_reopen_commit,
+    .bdrv_reopen_abort = raw_reopen_abort,
     .bdrv_close = raw_close,
     .bdrv_create = raw_create,
     .bdrv_co_discard = raw_co_discard,
Signature · 1 line
1.7.11.4
author
#11 lore raw

PATCH v4 10/19 block: raw image file reopen

In reply to Jeff Cody

These are the stubs for the file reopen drivers for the raw format.

There is currently nothing that needs to be done by the raw driver in reopen.

---
 block/raw.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
block/raw.c +10 -0
index ff34ea4..253e949 100644
@@ -9,6 +9,14 @@ static int raw_open(BlockDriverState *bs, int flags)
     return 0;
 }
 
+/* We have nothing to do for raw reopen, stubs just return
+ * success */
+static int raw_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue,  Error **errp)
+{
+    return 0;
+}
+
 static int coroutine_fn raw_co_readv(BlockDriverState *bs, int64_t sector_num,
                                      int nb_sectors, QEMUIOVector *qiov)
 {
@@ -115,6 +123,8 @@ static BlockDriver bdrv_raw = {
     .bdrv_open          = raw_open,
     .bdrv_close         = raw_close,
 
+    .bdrv_reopen_prepare  = raw_reopen_prepare,
+
     .bdrv_co_readv          = raw_co_readv,
     .bdrv_co_writev         = raw_co_writev,
     .bdrv_co_is_allocated   = raw_co_is_allocated,
Signature · 1 line
1.7.11.4
author
#12 lore raw

PATCH v4 11/19 block: qed image file reopen

In reply to Jeff Cody

These are the stubs for the file reopen drivers for the qed format.

There is currently nothing that needs to be done by the qed driver in reopen.

---
 block/qed.c | 9 +++++++++
 1 file changed, 9 insertions(+)
block/qed.c +9 -0
index 21cb239..6c182ca 100644
@@ -505,6 +505,14 @@ out:
     return ret;
 }
 
+/* We have nothing to do for QED reopen, stubs just return
+ * success */
+static int bdrv_qed_reopen_prepare(BDRVReopenState *state,
+                                   BlockReopenQueue *queue, Error **errp)
+{
+    return 0;
+}
+
 static void bdrv_qed_close(BlockDriverState *bs)
 {
     BDRVQEDState *s = bs->opaque;
@@ -1564,6 +1572,7 @@ static BlockDriver bdrv_qed = {
     .bdrv_rebind              = bdrv_qed_rebind,
     .bdrv_open                = bdrv_qed_open,
     .bdrv_close               = bdrv_qed_close,
+    .bdrv_reopen_prepare      = bdrv_qed_reopen_prepare,
     .bdrv_create              = bdrv_qed_create,
     .bdrv_co_is_allocated     = bdrv_qed_co_is_allocated,
     .bdrv_make_empty          = bdrv_qed_make_empty,
Signature · 1 line
1.7.11.4
author
#13 lore raw

PATCH v4 12/19 block: qcow2 image file reopen

In reply to Jeff Cody

These are the stubs for the file reopen drivers for the qcow2 format.

There is currently nothing that needs to be done by the qcow2 driver in reopen.

---
 block/qcow2.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
block/qcow2.c +10 -0
index 8f183f1..aa5e603 100644
@@ -52,6 +52,7 @@ typedef struct {
     uint32_t magic;
     uint32_t len;
 } QCowExtension;
+
 #define  QCOW2_EXT_MAGIC_END 0
 #define  QCOW2_EXT_MAGIC_BACKING_FORMAT 0xE2792ACA
 #define  QCOW2_EXT_MAGIC_FEATURE_TABLE 0x6803f857
@@ -558,6 +559,14 @@ static int qcow2_set_key(BlockDriverState *bs, const char *key)
     return 0;
 }
 
+/* We have nothing to do for QCOW2 reopen, stubs just return
+ * success */
+static int qcow2_reopen_prepare(BDRVReopenState *state,
+                                BlockReopenQueue *queue, Error **errp)
+{
+    return 0;
+}
+
 static int coroutine_fn qcow2_co_is_allocated(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, int *pnum)
 {
@@ -1679,6 +1688,7 @@ static BlockDriver bdrv_qcow2 = {
     .bdrv_probe         = qcow2_probe,
     .bdrv_open          = qcow2_open,
     .bdrv_close         = qcow2_close,
+    .bdrv_reopen_prepare  = qcow2_reopen_prepare,
     .bdrv_create        = qcow2_create,
     .bdrv_co_is_allocated = qcow2_co_is_allocated,
     .bdrv_set_key       = qcow2_set_key,
Signature · 1 line
1.7.11.4
author
#14 lore raw

PATCH v4 13/19 block: qcow image file reopen

In reply to Jeff Cody

These are the stubs for the file reopen drivers for the qcow format.

There is currently nothing that needs to be done by the qcow driver in reopen.

---
 block/qcow.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
block/qcow.c +10 -0
index 7b5ab87..b239c82 100644
@@ -197,6 +197,15 @@ static int qcow_open(BlockDriverState *bs, int flags)
     return ret;
 }
 
+
+/* We have nothing to do for QCOW reopen, stubs just return
+ * success */
+static int qcow_reopen_prepare(BDRVReopenState *state,
+                               BlockReopenQueue *queue, Error **errp)
+{
+    return 0;
+}
+
 static int qcow_set_key(BlockDriverState *bs, const char *key)
 {
     BDRVQcowState *s = bs->opaque;
@@ -868,6 +877,7 @@ static BlockDriver bdrv_qcow = {
     .bdrv_probe		= qcow_probe,
     .bdrv_open		= qcow_open,
     .bdrv_close		= qcow_close,
+    .bdrv_reopen_prepare = qcow_reopen_prepare,
     .bdrv_create	= qcow_create,
 
     .bdrv_co_readv          = qcow_co_readv,
Signature · 1 line
1.7.11.4
author
#15 lore raw

PATCH v4 14/19 block: vmdk image file reopen

In reply to Jeff Cody

This patch supports reopen for VMDK image files. VMDK extents are added to the existing reopen queue, so that the transactional model of reopen is maintained with multiple image files.

---
 block/vmdk.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
block/vmdk.c +35 -0
index bba4c61..f2e861b 100644
@@ -300,6 +300,40 @@ static int vmdk_is_cid_valid(BlockDriverState *bs)
     return 1;
 }
 
+/* Queue extents, if any, for reopen() */
+static int vmdk_reopen_prepare(BDRVReopenState *state,
+                               BlockReopenQueue *queue, Error **errp)
+{
+    BDRVVmdkState *s;
+    int ret = -1;
+    int i;
+    VmdkExtent *e;
+
+    assert(state != NULL);
+    assert(state->bs != NULL);
+
+    if (queue == NULL) {
+        error_set(errp, ERROR_CLASS_GENERIC_ERROR,
+                 "No reopen queue for VMDK extents");
+        goto exit;
+    }
+
+    s = state->bs->opaque;
+
+    assert(s != NULL);
+
+    for (i = 0; i < s->num_extents; i++) {
+        e = &s->extents[i];
+        if (e->file != state->bs->file) {
+            bdrv_reopen_queue(queue, e->file, state->flags);
+        }
+    }
+    ret = 0;
+
+exit:
+    return ret;
+}
+
 static int vmdk_parent_open(BlockDriverState *bs)
 {
     char *p_name;
@@ -1646,6 +1680,7 @@ static BlockDriver bdrv_vmdk = {
     .instance_size  = sizeof(BDRVVmdkState),
     .bdrv_probe     = vmdk_probe,
     .bdrv_open      = vmdk_open,
+    .bdrv_reopen_prepare = vmdk_reopen_prepare,
     .bdrv_read      = vmdk_co_read,
     .bdrv_write     = vmdk_co_write,
     .bdrv_close     = vmdk_close,
Signature · 1 line
1.7.11.4
author
#16 lore raw

PATCH v4 15/19 block: raw-win32 driver reopen support

In reply to Jeff Cody

This is the support for reopen, for win32. Note that there is a key difference in the win32 reopen, namely that it is not guaranteed safe like all the other drivers. Attempts are made to reopen the file, or open the file in a new handle prior to closing the old handle. However, this is not always feasible, and there are times when we must close the existing file and then open the new file, breaking the transactional nature of the reopen.

---
 block/raw-win32.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)
block/raw-win32.c +105 -0
index 78c8306..8a698d3 100644
@@ -31,6 +31,7 @@
 #define FTYPE_FILE 0
 #define FTYPE_CD     1
 #define FTYPE_HARDDISK 2
+#define WINDOWS_VISTA 6
 
 typedef struct BDRVRawState {
     HANDLE hfile;
@@ -38,6 +39,10 @@ typedef struct BDRVRawState {
     char drive_path[16]; /* format: "d:\" */
 } BDRVRawState;
 
+typedef struct BDRVRawReopenState {
+    HANDLE hfile;
+} BDRVRawReopenState;
+
 int qemu_ftruncate64(int fd, int64_t length)
 {
     LARGE_INTEGER li;
@@ -117,6 +122,103 @@ static int raw_open(BlockDriverState *bs, const char *filename, int flags)
     return 0;
 }
 
+static int raw_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue, Error **errp)
+{
+    BDRVRawState *s;
+    BDRVRawReopenState *raw_s;
+    int ret = 0;
+    int access_flags;
+    DWORD overlapped;
+    OSVERSIONINFO osvi;
+
+    assert(state != NULL);
+    assert(state->bs != NULL);
+
+    s = state->bs->opaque;
+
+    state->opaque = g_malloc0(sizeof(BDRVRawReopenState));
+    raw_s = state->opaque;
+
+    raw_parse_flags(state->flags, &access_flags, &overlapped);
+
+    ZeroMemory(&osvi, sizeof(OSVERSIONINFO));
+    osvi.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+
+    GetVersionEx(&osvi);
+    raw_s->hfile = INVALID_HANDLE_VALUE;
+
+    if (osvi.dwMajorVersion >= WINDOWS_VISTA) {
+        raw_s->hfile = ReOpenFile(s->hfile, access_flags, FILE_SHARE_READ,
+                                  overlapped);
+    }
+
+    /* could not reopen the file handle, so fall back to opening
+     * new file (CreateFile) */
+    if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+        raw_s->hfile = CreateFile(state->bs->filename, access_flags,
+                                  FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                  overlapped, NULL);
+        if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+            /* this could happen because the access_flags requested are
+             * incompatible with the existing share mode of s->hfile,
+             * so our only option now is to close s->hfile, and try again.
+             * This could end badly */
+            CloseHandle(s->hfile);
+            s->hfile = INVALID_HANDLE_VALUE;
+            raw_s->hfile = CreateFile(state->bs->filename, access_flags,
+                                      FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                      overlapped, NULL);
+            if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+                /* Unrecoverable error */
+                error_set(errp, ERROR_CLASS_GENERIC_ERROR,
+                          "Fatal error reopening %s file; file closed and cannot be opened\n",
+                          state->bs->filename);
+                ret = -1;
+            } else{
+                /* since we had to close the original, go ahead and
+                 * re-assign here */
+                s->hfile = raw_s->hfile;
+                raw_s->hfile = INVALID_HANDLE_VALUE;
+            }
+        }
+    }
+
+    return ret;
+}
+
+
+static void raw_reopen_commit(BDRVReopenState *state)
+{
+    BDRVRawReopenState *raw_s = state->opaque;
+    BDRVRawState *s = state->bs->opaque;
+
+    if (raw_s->hfile != INVALID_HANDLE_VALUE) {
+        CloseHandle(s->hfile);
+        s->hfile = raw_s->hfile;
+    }
+
+    g_free(state->opaque);
+    state->opaque = NULL;
+}
+
+
+static void raw_reopen_abort(BDRVReopenState *state)
+{
+    BDRVRawReopenState *raw_s = state->opaque;
+
+     /* nothing to do if NULL, we didn't get far enough */
+    if (raw_s == NULL) {
+        return;
+    }
+
+    if (raw_s->hfile != INVALID_HANDLE_VALUE) {
+        CloseHandle(raw_s->hfile);
+    }
+    g_free(state->opaque);
+    state->opaque = NULL;
+}
+
 static int raw_read(BlockDriverState *bs, int64_t sector_num,
                     uint8_t *buf, int nb_sectors)
 {
@@ -287,6 +389,9 @@ static BlockDriver bdrv_file = {
     .protocol_name	= "file",
     .instance_size	= sizeof(BDRVRawState),
     .bdrv_file_open	= raw_open,
+    .bdrv_reopen_prepare = raw_reopen_prepare,
+    .bdrv_reopen_commit = raw_reopen_commit,
+    .bdrv_reopen_abort = raw_reopen_abort,
     .bdrv_close		= raw_close,
     .bdrv_create	= raw_create,
 
Signature · 1 line
1.7.11.4
#17 lore raw

Re: [Qemu-devel] [PATCH v4 15/19] block: raw-win32 driver reopen support

Am 20.09.2012 21:13, schrieb Jeff Cody:

Quoted 8 lines

This is the support for reopen, for win32. Note that there is a key difference in the win32 reopen, namely that it is not guaranteed safe like all the other drivers. Attempts are made to reopen the file, or open the file in a new handle prior to closing the old handle. However, this is not always feasible, and there are times when we must close the existing file and then open the new file, breaking the transactional nature of the reopen.

Quoted 4 lines
---
 block/raw-win32.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

I can't really review win32 code, but two comments anyway:

Quoted 60 lines
block/raw-win32.c +38 -0
index 78c8306..8a698d3 100644
@@ -31,6 +31,7 @@
 #define FTYPE_FILE 0
 #define FTYPE_CD     1
 #define FTYPE_HARDDISK 2
+#define WINDOWS_VISTA 6
 
 typedef struct BDRVRawState {
     HANDLE hfile;
@@ -38,6 +39,10 @@ typedef struct BDRVRawState {
     char drive_path[16]; /* format: "d:\" */
 } BDRVRawState;
 
+typedef struct BDRVRawReopenState {
+    HANDLE hfile;
+} BDRVRawReopenState;
+
 int qemu_ftruncate64(int fd, int64_t length)
 {
     LARGE_INTEGER li;
@@ -117,6 +122,103 @@ static int raw_open(BlockDriverState *bs, const char *filename, int flags)
     return 0;
 }
 
+static int raw_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue, Error **errp)
+{
+    BDRVRawState *s;
+    BDRVRawReopenState *raw_s;
+    int ret = 0;
+    int access_flags;
+    DWORD overlapped;
+    OSVERSIONINFO osvi;
+
+    assert(state != NULL);
+    assert(state->bs != NULL);
+
+    s = state->bs->opaque;
+
+    state->opaque = g_malloc0(sizeof(BDRVRawReopenState));
+    raw_s = state->opaque;
+
+    raw_parse_flags(state->flags, &access_flags, &overlapped);
+
+    ZeroMemory(&osvi, sizeof(OSVERSIONINFO));
+    osvi.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+
+    GetVersionEx(&osvi);
+    raw_s->hfile = INVALID_HANDLE_VALUE;
+
+    if (osvi.dwMajorVersion >= WINDOWS_VISTA) {
+        raw_s->hfile = ReOpenFile(s->hfile, access_flags, FILE_SHARE_READ,
+                                  overlapped);
+    }
+
+    /* could not reopen the file handle, so fall back to opening
+     * new file (CreateFile) */

block/raw-win32.c static int raw_open(BlockDriverState *bs, const char *filename, int flags) · line 167

Quoted 10 lines
block/raw-win32.c +10 -0
+    if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+        raw_s->hfile = CreateFile(state->bs->filename, access_flags,
+                                  FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                  overlapped, NULL);
+        if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+            /* this could happen because the access_flags requested are
+             * incompatible with the existing share mode of s->hfile,
+             * so our only option now is to close s->hfile, and try again.
+             * This could end badly */
+            CloseHandle(s->hfile);

How common is this case?

We do have another option, namely not reopen at all and return an error. Of course, this only makes sense if it doesn't mean that we almost never succeed.

block/raw-win32.c static int raw_open(BlockDriverState *bs, const char *filename, int flags) · line 175

Quoted 8 lines
block/raw-win32.c +8 -0
+            s->hfile = INVALID_HANDLE_VALUE;
+            raw_s->hfile = CreateFile(state->bs->filename, access_flags,
+                                      FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                      overlapped, NULL);
+            if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+                /* Unrecoverable error */
+                error_set(errp, ERROR_CLASS_GENERIC_ERROR,
+                          "Fatal error reopening %s file; file closed and cannot be opened\n",

This line is longer than 80 characters.

Kevin

#18 lore raw

Re: [Qemu-devel] [PATCH v4 15/19] block: raw-win32 driver reopen support

Il 21/09/2012 10:33, Kevin Wolf ha scritto:

Quoted 12 lines
Quoted 4 lines
Quoted 4 lines
block/raw-win32.c +4 -0
+    /* could not reopen the file handle, so fall back to opening
+     * new file (CreateFile) */
+    if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+        raw_s->hfile = CreateFile(state->bs->filename, access_flags,
Quoted 8 lines

block/raw-win32.c static int raw_open(BlockDriverState *bs, const char *filename, int flags) · line 167

Quoted 8 lines
block/raw-win32.c +8 -0
+                                  FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                  overlapped, NULL);
+        if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+            /* this could happen because the access_flags requested are
+             * incompatible with the existing share mode of s->hfile,
+             * so our only option now is to close s->hfile, and try again.
+             * This could end badly */
+            CloseHandle(s->hfile);
Quoted 5 lines

How common is this case?

We do have another option, namely not reopen at all and return an error. Of course, this only makes sense if it doesn't mean that we almost never succeed.

Probably pretty common since we specify FILE_SHARE_READ for the sharing mode, meaning that "subsequent open operations on a file or device are only able to request read access".

I would change it to FILE_SHARE_READ|FILE_SHARE_WRITE and remove this code.

Paolo

author
#19 lore raw

Re: [Qemu-devel] [PATCH v4 15/19] block: raw-win32 driver reopen support

Quoted 15 lines · Paolo Bonzini

Il 21/09/2012 10:33, Kevin Wolf ha scritto:

Quoted 14 lines
Quoted 4 lines
Quoted 4 lines
block/raw-win32.c +4 -0
+    /* could not reopen the file handle, so fall back to opening
+     * new file (CreateFile) */
+    if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+        raw_s->hfile = CreateFile(state->bs->filename, access_flags,
Quoted 8 lines

block/raw-win32.c static int raw_open(BlockDriverState *bs, const char *filename, int flags) · line 167

Quoted 8 lines
block/raw-win32.c +8 -0
+                                  FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                  overlapped, NULL);
+        if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+            /* this could happen because the access_flags requested are
+             * incompatible with the existing share mode of s->hfile,
+             * so our only option now is to close s->hfile, and try again.
+             * This could end badly */
+            CloseHandle(s->hfile);

How common is this case?

Quoted 8 lines
Quoted 3 lines

We do have another option, namely not reopen at all and return an error. Of course, this only makes sense if it doesn't mean that we almost never succeed.

Probably pretty common since we specify FILE_SHARE_READ for the sharing mode, meaning that "subsequent open operations on a file or device are only able to request read access".

Yes, I think this is by far the most common case.

Quoted 4 lines

I would change it to FILE_SHARE_READ|FILE_SHARE_WRITE and remove this code.

Paolo

I contemplated doing that, but I wasn't sure if there was any particular reason it was originally done with FILE_SHARE_READ only in the first place (security, etc..). I was hesitant to override that behaviour as the new default under w32. Do we know if this is acceptable / safe?

#20 lore raw

Re: [Qemu-devel] [PATCH v4 15/19] block: raw-win32 driver reopen support

Il 21/09/2012 14:17, Jeff Cody ha scritto:

Quoted 20 lines · Paolo Bonzini
Quoted 19 lines

Il 21/09/2012 10:33, Kevin Wolf ha scritto:

Quoted 17 lines
Quoted 4 lines
Quoted 4 lines
block/raw-win32.c +4 -0
+    /* could not reopen the file handle, so fall back to opening
+     * new file (CreateFile) */
+    if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+        raw_s->hfile = CreateFile(state->bs->filename, access_flags,
Quoted 8 lines

block/raw-win32.c static int raw_open(BlockDriverState *bs, const char *filename, int flags) · line 167

Quoted 8 lines
block/raw-win32.c +8 -0
+                                  FILE_SHARE_READ, NULL, OPEN_EXISTING,
+                                  overlapped, NULL);
+        if (raw_s->hfile == INVALID_HANDLE_VALUE) {
+            /* this could happen because the access_flags requested are
+             * incompatible with the existing share mode of s->hfile,
+             * so our only option now is to close s->hfile, and try again.
+             * This could end badly */
+            CloseHandle(s->hfile);

How common is this case?

We do have another option, namely not reopen at all and return an error. Of course, this only makes sense if it doesn't mean that we almost never succeed.

Quoted 5 lines
Quoted 3 lines

Probably pretty common since we specify FILE_SHARE_READ for the sharing mode, meaning that "subsequent open operations on a file or device are only able to request read access".

Yes, I think this is by far the most common case.

Actually ReOpenFile probably only takes into account _other_ sharing modes, not the one for hFile, so it may even be unnecessary.

But...

Quoted 6 lines
Quoted 1 line

I would change it to FILE_SHARE_READ|FILE_SHARE_WRITE and remove this code.

I contemplated doing that, but I wasn't sure if there was any particular reason it was originally done with FILE_SHARE_READ only in the first place (security, etc..). I was hesitant to override that behaviour as the new default under w32. Do we know if this is acceptable / safe?

... let's just make things work the same as in Unix.

Paolo

author
#21 lore raw

PATCH v4 16/19 block: vdi image file reopen

In reply to Jeff Cody

There is currently nothing that needs to be done for VDI reopen.

---
 block/vdi.c | 7 +++++++
 1 file changed, 7 insertions(+)
block/vdi.c +7 -0
index 550cf58..f35b12e 100644
@@ -454,6 +454,12 @@ static int vdi_open(BlockDriverState *bs, int flags)
     return -1;
 }
 
+static int vdi_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue, Error **errp)
+{
+    return 0;
+}
+
 static int coroutine_fn vdi_co_is_allocated(BlockDriverState *bs,
         int64_t sector_num, int nb_sectors, int *pnum)
 {
@@ -761,6 +767,7 @@ static BlockDriver bdrv_vdi = {
     .bdrv_probe = vdi_probe,
     .bdrv_open = vdi_open,
     .bdrv_close = vdi_close,
+    .bdrv_reopen_prepare = vdi_reopen_prepare,
     .bdrv_create = vdi_create,
     .bdrv_co_is_allocated = vdi_co_is_allocated,
     .bdrv_make_empty = vdi_make_empty,
Signature · 1 line
1.7.11.4
author
#22 lore raw

PATCH v4 17/19 block: vpc image file reopen

In reply to Jeff Cody

There is currently nothing that needs to be done for VPC image file reopen.

---
 block/vpc.c | 7 +++++++
 1 file changed, 7 insertions(+)
block/vpc.c +7 -0
index c0b82c4..b6bf52f 100644
@@ -265,6 +265,12 @@ static int vpc_open(BlockDriverState *bs, int flags)
     return err;
 }
 
+static int vpc_reopen_prepare(BDRVReopenState *state,
+                              BlockReopenQueue *queue, Error **errp)
+{
+    return 0;
+}
+
 /*
  * Returns the absolute byte offset of the given sector in the image file.
  * If the sector is not allocated, -1 is returned instead.
@@ -783,6 +789,7 @@ static BlockDriver bdrv_vpc = {
     .bdrv_probe     = vpc_probe,
     .bdrv_open      = vpc_open,
     .bdrv_close     = vpc_close,
+    .bdrv_reopen_prepare = vpc_reopen_prepare,
     .bdrv_create    = vpc_create,
 
     .bdrv_read              = vpc_co_read,
Signature · 1 line
1.7.11.4
author
#23 lore raw

PATCH v4 18/19 block: convert bdrv_commit() to use bdrv_reopen()

In reply to Jeff Cody

Currently, bdrv_commit() reopens images r/w itself, via risky _delete() and _open() calls. Use the new safe method for drive reopen.

---
 block.c | 48 +++++-------------------------------------------
 1 file changed, 5 insertions(+), 43 deletions(-)
block.c +5 -43
index c7c1a3b..84544d2 100644
@@ -1501,13 +1501,11 @@ int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
 int bdrv_commit(BlockDriverState *bs)
 {
     BlockDriver *drv = bs->drv;
-    BlockDriver *backing_drv;
     int64_t sector, total_sectors;
     int n, ro, open_flags;
-    int ret = 0, rw_ret = 0;
+    int ret = 0;
     uint8_t *buf;
     char filename[1024];
-    BlockDriverState *bs_rw, *bs_ro;
 
     if (!drv)
         return -ENOMEDIUM;
@@ -1516,42 +1514,18 @@ int bdrv_commit(BlockDriverState *bs)
         return -ENOTSUP;
     }
 
-    if (bs->backing_hd->keep_read_only) {
-        return -EACCES;
-    }
-
     if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
         return -EBUSY;
     }
 
-    backing_drv = bs->backing_hd->drv;
     ro = bs->backing_hd->read_only;
     strncpy(filename, bs->backing_hd->filename, sizeof(filename));
     open_flags =  bs->backing_hd->open_flags;
 
     if (ro) {
-        /* re-open as RW */
-        bdrv_delete(bs->backing_hd);
-        bs->backing_hd = NULL;
-        bs_rw = bdrv_new("");
-        rw_ret = bdrv_open(bs_rw, filename, open_flags | BDRV_O_RDWR,
-            backing_drv);
-        if (rw_ret < 0) {
-            bdrv_delete(bs_rw);
-            /* try to re-open read-only */
-            bs_ro = bdrv_new("");
-            ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR,
-                backing_drv);
-            if (ret < 0) {
-                bdrv_delete(bs_ro);
-                /* drive not functional anymore */
-                bs->drv = NULL;
-                return ret;
-            }
-            bs->backing_hd = bs_ro;
-            return rw_ret;
+        if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
+            return -EACCES;
         }
-        bs->backing_hd = bs_rw;
     }
 
     total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
@@ -1588,20 +1562,8 @@ ro_cleanup:
     g_free(buf);
 
     if (ro) {
-        /* re-open as RO */
-        bdrv_delete(bs->backing_hd);
-        bs->backing_hd = NULL;
-        bs_ro = bdrv_new("");
-        ret = bdrv_open(bs_ro, filename, open_flags & ~BDRV_O_RDWR,
-            backing_drv);
-        if (ret < 0) {
-            bdrv_delete(bs_ro);
-            /* drive not functional anymore */
-            bs->drv = NULL;
-            return ret;
-        }
-        bs->backing_hd = bs_ro;
-        bs->backing_hd->keep_read_only = 0;
+        /* ignoring error return here */
+        bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
     }
 
     return ret;
Signature · 1 line
1.7.11.4
author
#24 lore raw

PATCH v4 19/19 block: remove keep_read_only flag from BlockDriverState struct

In reply to Jeff Cody

The keep_read_only flag is no longer used, in favor of the bdrv flag BDRV_O_ALLOW_RDWR.

---
 block.c     | 2 --
 block_int.h | 1 -
 2 files changed, 3 deletions(-)
block.c +0 -2
index 84544d2..751ebdc 100644
@@ -812,8 +812,6 @@ int bdrv_open(BlockDriverState *bs, const char *filename, int flags,
         flags |= BDRV_O_ALLOW_RDWR;
     }
 
-    bs->keep_read_only = !(flags & BDRV_O_ALLOW_RDWR);
-
     /* Open the image */
     ret = bdrv_open_common(bs, filename, flags, drv);
     if (ret < 0) {
block_int.h +0 -1
index 22b3d93..ac4245c 100644
@@ -275,7 +275,6 @@ struct BlockDriverState {
     int64_t total_sectors; /* if we are reading a disk image, give its
                               size in sectors */
     int read_only; /* if true, the media is read only */
-    int keep_read_only; /* if true, the media was requested to stay read only */
     int open_flags; /* flags used to open the file, re-used for re-open */
     int encrypted; /* if true, the media is encrypted */
     int valid_key; /* if true, a valid encryption key has been set */
Signature · 1 line
1.7.11.4
Applied
#25 lore raw
In reply to Jeff Cody

Am 20.09.2012 21:13, schrieb Jeff Cody:

Quoted 33 lines

These patches are based off Supriya Kannery's original bdrv_reopen() patches as part of the hostcache series.

This provides support for safe reopen of a single image, or transactional reopening of multiple images atomically.

These changes are all reflected in my github repo:

git://github.com/codyprime/qemu-kvm-jtc.git branch: jtc-live-commit-1.3-v7

Jeff Cody (19):
block: correctly set the keep_read_only flag
block: make bdrv_set_enable_write_cache() modify open_flags
block: Framework for reopening files safely
block: move aio initialization into a helper function
block: move open flag parsing in raw block drivers to helper
functions
block: do not parse BDRV_O_CACHE_WB in block drivers
block: use BDRV_O_NOCACHE instead of s->aligned_buf in raw-posix.c
block: purge s->aligned_buf and s->aligned_buf_size from raw-posix.c
block: raw-posix image file reopen
block: raw image file reopen
block: qed image file reopen
block: qcow2 image file reopen
block: qcow image file reopen
block: vmdk image file reopen
block: raw-win32 driver reopen support
block: vdi image file reopen
block: vpc image file reopen
block: convert bdrv_commit() to use bdrv_reopen()
block: remove keep_read_only flag from BlockDriverState struct

Quoted 16 lines
 block.c           | 299 +++++++++++++++++++++++++++++++++++++++++++++---------
 block.h           |  18 ++++
 block/iscsi.c     |   4 -
 block/qcow.c      |  10 ++
 block/qcow2.c     |  10 ++
 block/qed.c       |   9 ++
 block/raw-posix.c | 225 ++++++++++++++++++++++++++++++----------
 block/raw-win32.c | 145 ++++++++++++++++++++++----
 block/raw.c       |  10 ++
 block/rbd.c       |   6 --
 block/sheepdog.c  |  14 ++-
 block/vdi.c       |   7 ++
 block/vmdk.c      |  35 +++++++
 block/vpc.c       |   7 ++
 block_int.h       |   9 +-
 15 files changed, 666 insertions(+), 142 deletions(-)

Thanks, applied all to the block branch, except for patch 15 (raw-win32), which I think can safely be applied on top when we've come to a conclusion.

Kevin