mx6qsabresd: Add 8-bit USDHC support
PATCH 1/1 mx6qsabresd: Add 8-bit USDHC support
USDHC3 has 8 pins wired in mx6qsabresd. Configure the extra pins.
Signed-off-by Fabio Estevam <[email protected]>
--- board/freescale/mx6qsabresd/mx6qsabresd.c | 4 ++++ 1 file changed, 4 insertions(+)
board/freescale/mx6qsabresd/mx6qsabresd.c +4 -0
@@ -81,6 +81,10 @@ iomux_v3_cfg_t usdhc3_pads[] = {MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 |MUX_PAD_CTRL (USDHC_PAD_CTRL ),MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 |MUX_PAD_CTRL (USDHC_PAD_CTRL ),MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), +MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 |MUX_PAD_CTRL (USDHC_PAD_CTRL ), MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ };
Signature · 1 line
1.7.9.5
PATCH 1/1 mx6qsabresd: Add 8-bit USDHC support
Quoted 4 lines · Fabio Estevam
USDHC3 has 8 pins wired in mx6qsabresd. Configure the extra pins.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================