Skip to contentSkip to conversation

Added build configuration for Network UPS Tools (nut) package. Signed-off-by: Dallas Clement <[email protected]>

PATCH New Dallas Clement 2 participants 2 messages Sep 25, 2012 – Oct 3, 2012

lore
Share & tools
lore

Dallas Clement

author
#0 lore raw

PATCH 1/1 Added build configuration for Network UPS Tools (nut) package. Signed-off-by: Dallas Clement <[email protected]>

package/Config.in | 1 +

 package/nut/Config.in |    6 ++++++
 package/nut/nut.mk    |   10 ++++++++++
 3 files changed, 17 insertions(+), 0 deletions(-)
 create mode 100644 package/nut/Config.in
 create mode 100644 package/nut/nut.mk
package/Config.in +1 -0
index 083cad8..bf26419 100644
@@ -590,6 +590,7 @@ source "package/noip/Config.in"
 source "package/ngircd/Config.in"
 source "package/ngrep/Config.in"
 source "package/ntp/Config.in"
+source "package/nut/Config.in"
 source "package/nuttcp/Config.in"
 source "package/olsr/Config.in"
 source "package/openntpd/Config.in"
package/nut/Config.in new file +6 -0
new file mode 100644
index 0000000..18b2aed
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_NUT
+       bool "nut"
+       help
+         Network UPS tools
+
+         www.networkupstools.org
package/nut/nut.mk new file +10 -0
new file mode 100644
index 0000000..7a0b7c6
@@ -0,0 +1,10 @@
+#############################################################
+#
+# nut
+#
+#############################################################
+NUT_VERSION = 2.4.3
+NUT_SOURCE = nut-$(NUT_VERSION).tar.gz
+NUT_SITE = http://www.networkupstools.org/source/2.4/
+
+$(eval $(autotools-package))
#1 lore raw

PATCH 1/1 Added build configuration for Network UPS Tools (nut) package. Signed-off-by: Dallas Clement <[email protected]>

Quoted 6 lines · Dallas Clement

package/Config.in | 1 +

  package/nut/Config.in |    6 ++++++
  package/nut/nut.mk    |   10 ++++++++++
  3 files changed, 17 insertions(+), 0 deletions(-)

create mode 100644 package/nut/Config.in
create mode 100644 package/nut/nut.mk

I don't know which mailer you're using, but your patches don't come
through correctly. You should have:

Subject: [PATH] nut: new package

Body:

Signed-off-by Dallas Clement <...>

---
<diffstat>

(quoted diff) +0 -0

And if you want additional comments (e.g. patch changelog) it should
go below your SOB, separated by a line containing three dashes.

[snip]

Quoted 6 lines
package/nut/nut.mk new file +0 -0
new file mode 100644
index 0000000..7a0b7c6

package/nut/nut.mk line 10

Quoted 10 lines
package/nut/nut.mk new file +10 -0
@@ -0,0 +1,10 @@
+#############################################################
+#
+# nut
+#
+#############################################################
+NUT_VERSION = 2.4.3
+NUT_SOURCE = nut-$(NUT_VERSION).tar.gz
+NUT_SITE = http://www.networkupstools.org/source/2.4/
+
+$(eval $(autotools-package))

On uClibc toolchain, it misses -lm so you should add:

NUT_CONF_ENV = LDFLAGS="$(TARGET_LDFLAGS) -lm"

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F