ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

PATCH Superseded Gaëtan Carlier 3 participants 6 messages Sep 5, 2012 – Oct 10, 2012

Subsystems (3)

Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape

lore

Share & tools

lore

Gaëtan Carlier

author

2012-09-05 11:06 UTC #0 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Hi,
This is to prepare addition of m2m-emmapp driver otherwise
IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor
is needed.

IMX_HAVE_PLATFORM_MX2_EMMA define has been added.

Changes since v1:
- Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform due to pending patch in linux-media tree that will call imx27_add_mx2_emmaprp().

Signed-off-by Ga?tan Carlier <[email protected]>

---
 arch/arm/mach-imx/Kconfig                       |    1 +
 arch/arm/mach-imx/devices-imx27.h               |    4 ++-
 arch/arm/plat-mxc/devices/Kconfig               |    3 ++
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-mx2-camera.c |   17 ---------
 arch/arm/plat-mxc/devices/platform-mx2-emma.c   |   41 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |    9 ++++-
 7 files changed, 57 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-mx2-emma.c

arch/arm/mach-imx/Kconfig +1 -0

index afd542a..c2984d7 100644
@@ -322,6 +322,7 @@ config MACH_IMX27_VISSTRIM_M10
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MX2_EMMA
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select LEDS_GPIO_REGISTER

arch/arm/mach-imx/devices-imx27.h +3 -1

index 0482293..d8eb4a0 100644
@@ -54,8 +54,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
 #define imx27_add_mx2_emmaprp()	\
-	imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
+	imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
 
 extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)	\

arch/arm/plat-mxc/devices/Kconfig +3 -0

index 6b46cee..96feef7 100644
@@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA
 config IMX_HAVE_PLATFORM_MX2_CAMERA
 	bool
 
+config IMX_HAVE_PLATFORM_MX2_EMMA
+	bool
+
 config IMX_HAVE_PLATFORM_MXC_EHCI
 	bool

arch/arm/plat-mxc/devices/Makefile +1 -0

index 76f3195..7292c1f 100644
@@ -28,3 +28,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/plat-mxc/devices/platform-mx2-camera.c +0 ~~-17~~

index 11eace9..11c688f 100644
@@ -63,20 +63,3 @@ struct platform_device *__init imx_add_mx2_camera(
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
 
-struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobaseemmaprp,
-			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqemmaprp,
-			.end = data->irqemmaprp,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
-			res, 2, NULL, 0, DMA_BIT_MASK(32));
-}

arch/arm/plat-mxc/devices/platform-mx2-emma.c new file +41 -0

41 lines not on this page · raw message

arch/arm/plat-mxc/include/mach/devices-common.h +8 -1

index 762780c..2117072 100644
@@ -229,8 +229,15 @@ struct imx_mx2_camera_data {
 struct platform_device *__init imx_add_mx2_camera(
 		const struct imx_mx2_camera_data *data,
 		const struct mx2_camera_platform_data *pdata);
+
+
+struct imx_mx2_emma_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
 struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data);
+		const struct imx_mx2_emma_data *data);
 
 #include <mach/mxc_ehci.h>
 struct imx_mxc_ehci_data {

Signature · 1 line

1.7.7.4

Sascha Hauer

maintainer

2012-09-11 09:47 UTC #1 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Hi Javier,

Since you worked in this area recently, can I have your Ack on this?

As a side note: Please be prepared that all this should be removed in the not-so-far future. It would be good if you start converting your boards to devicetree soon. You may be doing so internally already, I don't know.

Thanks
Sascha

Quoted 172 lines · Ga?tan Carlier

Hi,
This is to prepare addition of m2m-emmapp driver otherwise
IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor
is needed.

IMX_HAVE_PLATFORM_MX2_EMMA define has been added.

Changes since v1:
- Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform due to pending patch in linux-media tree that will call imx27_add_mx2_emmaprp().

Signed-off-by Ga?tan Carlier <[email protected]>

---
 arch/arm/mach-imx/Kconfig                       |    1 +
 arch/arm/mach-imx/devices-imx27.h               |    4 ++-
 arch/arm/plat-mxc/devices/Kconfig               |    3 ++
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-mx2-camera.c |   17 ---------
 arch/arm/plat-mxc/devices/platform-mx2-emma.c   |   41 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |    9 ++++-
 7 files changed, 57 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-mx2-emma.c

arch/arm/mach-imx/Kconfig +1 -0

index afd542a..c2984d7 100644
@@ -322,6 +322,7 @@ config MACH_IMX27_VISSTRIM_M10
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MX2_EMMA
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select LEDS_GPIO_REGISTER

arch/arm/mach-imx/devices-imx27.h +3 -1

index 0482293..d8eb4a0 100644
@@ -54,8 +54,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)	\
 	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
 #define imx27_add_mx2_emmaprp()	\
-	imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
+	imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
 
 extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)	\

arch/arm/plat-mxc/devices/Kconfig +3 -0

index 6b46cee..96feef7 100644
@@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA
 config IMX_HAVE_PLATFORM_MX2_CAMERA
 	bool
 
+config IMX_HAVE_PLATFORM_MX2_EMMA
+	bool
+
 config IMX_HAVE_PLATFORM_MXC_EHCI
 	bool

arch/arm/plat-mxc/devices/Makefile +1 -0

index 76f3195..7292c1f 100644
@@ -28,3 +28,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/plat-mxc/devices/platform-mx2-camera.c +0 ~~-17~~

index 11eace9..11c688f 100644
@@ -63,20 +63,3 @@ struct platform_device *__init imx_add_mx2_camera(
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
 
-struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobaseemmaprp,
-			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irqemmaprp,
-			.end = data->irqemmaprp,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
-			res, 2, NULL, 0, DMA_BIT_MASK(32));
-}

arch/arm/plat-mxc/devices/platform-mx2-emma.c new file +41 -0

new file mode 100644
index 0000000..a51749a
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx2_emmaprp_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _EMMAPRP_BASE_ADDR,			\
+		.iosize = SZ_32,					\
+		.irq = soc ## _INT_EMMAPRP,				\
+	}
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
+	imx_mx2_emmaprp_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_emmaprp(
+		const struct imx_mx2_emma_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
+			res, 2, NULL, 0, DMA_BIT_MASK(32));
+}
+

arch/arm/plat-mxc/include/mach/devices-common.h +8 -1

index 762780c..2117072 100644
@@ -229,8 +229,15 @@ struct imx_mx2_camera_data {
 struct platform_device *__init imx_add_mx2_camera(
 		const struct imx_mx2_camera_data *data,
 		const struct mx2_camera_platform_data *pdata);
+
+
+struct imx_mx2_emma_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
 struct platform_device *__init imx_add_mx2_emmaprp(
-		const struct imx_mx2_camera_data *data);
+		const struct imx_mx2_emma_data *data);
 
 #include <mach/mxc_ehci.h>
 struct imx_mxc_ehci_data {

Signature · 1 line

1.7.7.4

Signature · 4 lines

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

javier Martin

2012-09-11 11:13 UTC #2 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Hi,

Quoted 3 lines · Sascha Hauer

Hi Javier,
Since you worked in this area recently, can I have your Ack on this?

Acked-by Javier Martin <[email protected]>

Quoted 4 lines

As a side note: Please be prepared that all this should be removed in the not-so-far future. It would be good if you start converting your boards to devicetree soon. You may be doing so internally already, I don't know.

We made some tests regarding devicetree this summer but we found that there are some things missing yet:
- pinctrl
- soc-camera and video sensor

I don't know if people from Linaro is planning to deal with pinctrl for i.MX27 or not.

Quoted 174 lines

Thanks
Sascha

Quoted 170 lines · Ga?tan Carlier

Hi,
This is to prepare addition of m2m-emmapp driver otherwise
IMX_HAVE_PLATFORM_MX2_CAMERA must be declared even if only Post-Processor
is needed.

IMX_HAVE_PLATFORM_MX2_EMMA define has been added.

Changes since v1:
- Add "select IMX_HAVE_PLATFORM_MX2_EMMA" for MACH_IMX27_VISSTRIM_M10 platform due to pending patch in linux-media tree that will call imx27_add_mx2_emmaprp().

Signed-off-by Ga?tan Carlier <[email protected]>

---
 arch/arm/mach-imx/Kconfig                       |    1 +
 arch/arm/mach-imx/devices-imx27.h               |    4 ++-
 arch/arm/plat-mxc/devices/Kconfig               |    3 ++
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-mx2-camera.c |   17 ---------
 arch/arm/plat-mxc/devices/platform-mx2-emma.c   |   41 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |    9 ++++-
 7 files changed, 57 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-mx2-emma.c

arch/arm/mach-imx/Kconfig +1 -0

index afd542a..c2984d7 100644
@@ -322,6 +322,7 @@ config MACH_IMX27_VISSTRIM_M10
      select IMX_HAVE_PLATFORM_IMX_SSI
      select IMX_HAVE_PLATFORM_IMX_UART
      select IMX_HAVE_PLATFORM_MX2_CAMERA
+     select IMX_HAVE_PLATFORM_MX2_EMMA
      select IMX_HAVE_PLATFORM_MXC_EHCI
      select IMX_HAVE_PLATFORM_MXC_MMC
      select LEDS_GPIO_REGISTER

arch/arm/mach-imx/devices-imx27.h +3 -1

index 0482293..d8eb4a0 100644
@@ -54,8 +54,10 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[];
 extern const struct imx_mx2_camera_data imx27_mx2_camera_data;
 #define imx27_add_mx2_camera(pdata)  \
      imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mx2_emma_data imx27_mx2_emmaprp_data;
 #define imx27_add_mx2_emmaprp()      \
-     imx_add_mx2_emmaprp(&imx27_mx2_camera_data)
+     imx_add_mx2_emmaprp(&imx27_mx2_emmaprp_data)
 
 extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data;
 #define imx27_add_mxc_ehci_otg(pdata)        \

arch/arm/plat-mxc/devices/Kconfig +3 -0

index 6b46cee..96feef7 100644
@@ -56,6 +56,9 @@ config IMX_HAVE_PLATFORM_MX1_CAMERA
 config IMX_HAVE_PLATFORM_MX2_CAMERA
      bool
 
+config IMX_HAVE_PLATFORM_MX2_EMMA
+     bool
+
 config IMX_HAVE_PLATFORM_MXC_EHCI
      bool

arch/arm/plat-mxc/devices/Makefile +1 -0

index 76f3195..7292c1f 100644
@@ -28,3 +28,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_EMMA) += platform-mx2-emma.o

arch/arm/plat-mxc/devices/platform-mx2-camera.c +0 ~~-17~~

index 11eace9..11c688f 100644
@@ -63,20 +63,3 @@ struct platform_device *__init imx_add_mx2_camera(
                      pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
 
-struct platform_device *__init imx_add_mx2_emmaprp(
-             const struct imx_mx2_camera_data *data)
-{
-     struct resource res[] = {
-             {
-                     .start = data->iobaseemmaprp,
-                     .end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
-                     .flags = IORESOURCE_MEM,
-             }, {
-                     .start = data->irqemmaprp,
-                     .end = data->irqemmaprp,
-                     .flags = IORESOURCE_IRQ,
-             },
-     };
-     return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
-                     res, 2, NULL, 0, DMA_BIT_MASK(32));
-}

arch/arm/plat-mxc/devices/platform-mx2-emma.c new file +41 -0

new file mode 100644
index 0000000..a51749a
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx2_emmaprp_data_entry_single(soc)                               \
+     {                                                               \
+             .iobase = soc ## _EMMAPRP_BASE_ADDR,                    \
+             .iosize = SZ_32,                                        \
+             .irq = soc ## _INT_EMMAPRP,                             \
+     }
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_emma_data imx27_mx2_emmaprp_data __initconst =
+     imx_mx2_emmaprp_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_emmaprp(
+             const struct imx_mx2_emma_data *data)
+{
+     struct resource res[] = {
+             {
+                     .start = data->iobase,
+                     .end = data->iobase + data->iosize - 1,
+                     .flags = IORESOURCE_MEM,
+             }, {
+                     .start = data->irq,
+                     .end = data->irq,
+                     .flags = IORESOURCE_IRQ,
+             },
+     };
+     return imx_add_platform_device_dmamask("m2m-emmaprp", 0,
+                     res, 2, NULL, 0, DMA_BIT_MASK(32));
+}
+

arch/arm/plat-mxc/include/mach/devices-common.h +8 -2

index 762780c..2117072 100644
@@ -229,8 +229,15 @@ struct imx_mx2_camera_data {
 struct platform_device *__init imx_add_mx2_camera(
              const struct imx_mx2_camera_data *data,
              const struct mx2_camera_platform_data *pdata);
+
+
+struct imx_mx2_emma_data {
+     resource_size_t iobase;
+     resource_size_t iosize;
+     resource_size_t irq;
+};
 struct platform_device *__init imx_add_mx2_emmaprp(
-             const struct imx_mx2_camera_data *data);
+             const struct imx_mx2_emma_data *data);
 
 #include <mach/mxc_ehci.h>
 struct imx_mxc_ehci_data {
--

1.7.7.4

Signature · 7 lines

Javier Martin
Vista Silicon S.L.
CDTUC - FASE C - Oficina S-345
Avda de los Castros s/n
39005- Santander. Cantabria. Spain
+34 942 25 32 60
www.vista-silicon.com

Sascha Hauer

maintainer

2012-09-11 11:17 UTC #3 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Quoted 8 lines · javier Martin

Hi,
Quoted 3 lines · Sascha Hauer
Hi Javier,
Since you worked in this area recently, can I have your Ack on this?
Acked-by Javier Martin <[email protected]>

Thanks

Quoted 6 lines

Quoted 5 lines
As a side note: Please be prepared that all this should be removed in the not-so-far future. It would be good if you start converting your boards to devicetree soon. You may be doing so internally already, I don't know.

Quoted 7 lines

We made some tests regarding devicetree this summer but we found that there are some things missing yet:
- pinctrl
- soc-camera and video sensor
I don't know if people from Linaro is planning to deal with pinctrl for i.MX27 or not.

I don't think Linaro will do anything for the older i.MX like the i.MX27. With soc-camera I'm optimistic that someone will come up with patches soon.

Sascha

Signature · 4 lines

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Gaëtan Carlier

author

2012-10-09 13:01 UTC #4 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Hi Sascha,

Quoted 11 lines · Sascha Hauer

Quoted 8 lines · javier Martin
Hi,
Quoted 3 lines · Sascha Hauer
Hi Javier,
Since you worked in this area recently, can I have your Ack on this?
Acked-by Javier Martin <[email protected]>
Thanks

This patch is missing in next-20121008 and seems to be never committed. Is there any reason ?

Quoted 12 lines

Quoted 12 lines
Quoted 6 lines
As a side note: Please be prepared that all this should be removed in the not-so-far future. It would be good if you start converting your boards to devicetree soon. You may be doing so internally already, I don't know.
We made some tests regarding devicetree this summer but we found that there are some things missing yet:
- pinctrl
- soc-camera and video sensor

Quoted 9 lines

Quoted 2 lines
I don't know if people from Linaro is planning to deal with pinctrl for i.MX27 or not.
I don't think Linaro will do anything for the older i.MX like the i.MX27. With soc-camera I'm optimistic that someone will come up with patches soon.
Sascha

Thank you.
Best regards,
Ga?tan Carlier.

Sascha Hauer

maintainer

2012-10-10 08:34 UTC #5 lore raw

PATCH v2 1/1 ARM : i.MX27 : split code for allocation of ressources of camera and eMMA

Quoted 8 lines · Ga?tan Carlier

Hi Sascha,
Quoted 6 lines · Sascha Hauer
Quoted 5 lines · javier Martin
Hi,
Quoted 2 lines · Sascha Hauer
Hi Javier,

Quoted 7 lines

Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Since you worked in this area recently, can I have your Ack on this?
Acked-by Javier Martin <[email protected]>
Thanks
This patch is missing in next-20121008 and seems to be never committed. Is there any reason ?

Sorry, I simply missed to apply it :(

Did that now.

Sascha

Quoted 25 lines

Quoted 12 lines
Quoted 12 lines
Quoted 6 lines
As a side note: Please be prepared that all this should be removed in the not-so-far future. It would be good if you start converting your boards to devicetree soon. You may be doing so internally already, I don't know.
We made some tests regarding devicetree this summer but we found that there are some things missing yet:
- pinctrl
- soc-camera and video sensor
Quoted 9 lines
Quoted 2 lines
I don't know if people from Linaro is planning to deal with pinctrl for i.MX27 or not.
I don't think Linaro will do anything for the older i.MX like the i.MX27. With soc-camera I'm optimistic that someone will come up with patches soon.
Sascha
Thank you.
Best regards,
Ga?tan Carlier.

Signature · 4 lines

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |