Skip to contentSkip to conversation

mx6qsabreauto: Change mmcroot so it works out of box

PATCH New Otavio Salvador 3 participants 3 messages Oct 2, 2012 – Oct 10, 2012

lore
Share & tools
lore

Otavio Salvador

author
#0 lore raw

PATCH 1/1 mx6qsabreauto: Change mmcroot so it works out of box

The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we move this to the board configuration file.

Signed-off-by Otavio Salvador <[email protected]>
---
 include/configs/mx6qsabre_common.h |    2 +-
 include/configs/mx6qsabreauto.h    |    3 ++-
 include/configs/mx6qsabresd.h      |    1 +
 3 files changed, 4 insertions(+), 2 deletions(-)
include/configs/mx6qsabre_common.h +1 -1
index 247e8d6..e25e943 100644
@@ -86,7 +86,7 @@
 	"initrd_high=0xffffffff\0" \
 	"mmcdev=0\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
include/configs/mx6qsabreauto.h +2 -1
index a878dec..760f3ce 100644
@@ -1,7 +1,7 @@
 /*
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
- * Configuration settings for the Freescale i.MX6Q SabreSD board.
+ * Configuration settings for the Freescale i.MX6Q SabreAuto board.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

@@ -15,6 +15,7 @@
 #define CONFIG_MACH_TYPE	3529
 #define CONFIG_MXC_UART_BASE	UART4_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc3"
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
 
 #include "mx6qsabre_common.h"
include/configs/mx6qsabresd.h +1 -0
index f2ce79e..771d129 100644
@@ -20,6 +20,7 @@
 #define CONFIG_MACH_TYPE	3980
 #define CONFIG_MXC_UART_BASE	UART1_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc0"
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
 
 #include "mx6qsabre_common.h"
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 1/1 mx6qsabreauto: Change mmcroot so it works out of box

In reply to Otavio Salvador
Quoted 5 lines · Otavio Salvador

The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we move this to the board configuration file.

Signed-off-by Otavio Salvador <[email protected]>

---

Applied to u-boot-imx, next branch, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================