rpm5
Hi all!
I faced with strange error with rpm5 package manager:
=== THIRD-PARTY LIBRARIES (2/2) ===
checking popt.h usability... yes
checking popt.h presence... yes
checking for popt.h... yes
checking for poptGetContext in -lpopt... yes
checking whether to build with POPT library... yes (external: via pkg-config popt)
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for gzread in -lrpmz... no
checking for gzread in -lz... yes
checking for gzread in -lgz... no
checking whether to build with ZLib library... yes (external: via pkg-config zlib)
checking for gzseek... yes
checking bzlib.h usability... yes
checking bzlib.h presence... yes
checking for bzlib.h... yes
checking for BZ2_bzread in -lbz2... yes
checking whether to build with GNU BZip2 library... yes (external:
implicitly)
checking whether to build with XZ libLZMA library... yes (internal:
sub-directory xz)
checking beecrypt/api.h usability... yes
checking beecrypt/api.h presence... yes
checking for beecrypt/api.h... yes
checking for mpfprintln in -lbeecrypt... no
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found
make: *** [/home/fdkit/buildroot/output/build/rpm-5.2.0/.stamp_configured] Error 1
Full log
http://pastie.org/4932495
Locally i have installed rpm5 distro Mandriva 2012 and i can rebuild rpm5 package manager without any errors. Any solution?
Quoted 2 lines · Alexander Khryukin
Full log
http://pastie.org/4932495
It would be more relevant to post/home/fdkit/buildroot/output/build/rpm-5.2.0/config.log
Also please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.
Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.
(It works for me, BTW).
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
2012/10/10 Arnout Vandecappelle <[email protected]>
Quoted 22 lines · Alexander Khryukin
Quoted 4 lines
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/**build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--
Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Hi!
Thanks for the response
defconfig http://pastie.org/5029882
config.log
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found
when it installed
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121010/03a454d2/attachment.html>
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 43 lines
2012/10/10 Arnout Vandecappelle <[email protected]>
Quoted 22 lines · Alexander Khryukin
Quoted 4 lines
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/**build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Quoted 9 lines
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found when it installed
Seems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121010/5ce387d5/attachment.html>
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 58 lines
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 43 lines
2012/10/10 Arnout Vandecappelle <[email protected]>
Quoted 22 lines · Alexander Khryukin
Quoted 4 lines
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/**build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Quoted 9 lines
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found when it installed
Quoted 5 lines
Seems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
Bump
Problem still exist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121011/2ce2accb/attachment-0001.html>
Hello Alexander
According to this
http://sourceforge.net/mailarchive/forum.php?set=custom&viewmonth=&viewday=&forum_name=beecrypt-devel&style=nested&max_rows=25&submit=Change+View
it is missing "-lgomp"
I checked the beecrypt-4.2.1 and it reveals following:
grep gomp *
acinclude.m4: AC_SUBST(OPENMP_LIBS,"-lgomp")
configure: OPENMP_LIBS="-lgomp"
So openmp depends on libgomp
Beecrypt has a configure switch --disable-openmp
Maybe you could try adding that switch into BEECRYPT_CONF_OPT in Buildroot beecrypt.mk file,
rebuild beecrypt and then try rpm again.
Best regards
Stefan
11.10.2012 13:04, Alexander Khryukin kirjoitti:
Quoted 78 lines
2012/10/10 Alexander Khryukin <[email protected]
<mailto:[email protected]>>2012/10/10 Alexander Khryukin <[email protected] <mailto:[email protected]>>
2012/10/10 Arnout Vandecappelle <[email protected] <mailto:[email protected]>>
On 08/10/12 13:28, Alexander Khryukin wrote:
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated
when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and
recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--
Arnout Vandecappelle arnout
at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind
http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872
984 063 RPR Leuven
LinkedIn profile:
http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found when it installedSeems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
Quoted 8 lines
Bump
Problem still exist_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121011/617a3600/attachment.html>
Of course, if that works, it's just a quick fix.
For proper fix you should check that you have openmp working (that is, you have libgomp) for your compiler and
if that's ok then it's obvious that rpm5 configure needs patching
Regards
Stefan
11.10.2012 17:14, Stefan Fr?berg kirjoitti:
Quoted 119 lines
Hello Alexander
According to this
http://sourceforge.net/mailarchive/forum.php?set=custom&viewmonth=&viewday=&forum_name=beecrypt-devel&style=nested&max_rows=25&submit=Change+Viewit is missing "-lgomp"
I checked the beecrypt-4.2.1 and it reveals following:
grep gomp *
acinclude.m4:
AC_SUBST(OPENMP_LIBS,"-lgomp")
configure: OPENMP_LIBS="-lgomp"So openmp depends on libgomp
Beecrypt has a configure switch --disable-openmp
Maybe you could try adding that switch into
BEECRYPT_CONF_OPTin Buildroot beecrypt.mk file,
rebuild beecrypt and then try rpm again.Best regards
Stefan11.10.2012 13:04, Alexander Khryukin kirjoitti:
Quoted 79 lines
2012/10/10 Alexander Khryukin <[email protected]
<mailto:[email protected]>>2012/10/10 Alexander Khryukin <[email protected] <mailto:[email protected]>>
2012/10/10 Arnout Vandecappelle <[email protected] <mailto:[email protected]>>
On 08/10/12 13:28, Alexander Khryukin wrote:
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated
when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and
recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--
Arnout Vandecappelle arnout
at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind
http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872
984 063 RPR Leuven
LinkedIn profile:
http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found when it installedSeems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
Quoted 8 lines
Bump
Problem still exist_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Quoted 4 lines
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121011/11565fd5/attachment.html>
2012/10/11 Stefan Fr?berg <[email protected]>
Quoted 120 lines
Of course, if that works, it's just a quick fix.
For proper fix you should check that you have openmp working (that is, you have libgomp) for your compiler and
if that's ok then it's obvious that rpm5 configure needs patchingRegards
Stefan11.10.2012 17:14, Stefan Fr?berg kirjoitti:
Hello Alexander
According to this
it is missing "-lgomp"
I checked the beecrypt-4.2.1 and it reveals following:
grep gomp *
acinclude.m4:
AC_SUBST(OPENMP_LIBS,"-lgomp")
configure: OPENMP_LIBS="-lgomp"So openmp depends on libgomp
Beecrypt has a configure switch --disable-openmp
Maybe you could try adding that switch into
BEECRYPT_CONF_OPTin Buildroot beecrypt.mk file,
rebuild beecrypt and then try rpm again.Best regards
Stefan11.10.2012 13:04, Alexander Khryukin kirjoitti:
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 58 lines
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 43 lines
2012/10/10 Arnout Vandecappelle <[email protected]>
Quoted 22 lines · Alexander Khryukin
Quoted 4 lines
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Quoted 9 lines
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found
when it installedQuoted 5 lines
Seems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
Bump
Problem still exist_______________________________________________
buildroot mailing listbuildroot at busybox.nethttp://lists.busybox.net/mailman/listinfo/buildroot
Quoted 7 lines
_______________________________________________
buildroot mailing listbuildroot at busybox.nethttp://lists.busybox.net/mailman/listinfo/buildrootthat you have openmp working
How i can check this?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121011/64ab69dc/attachment.html>
2012/10/11 Alexander Khryukin <[email protected]>
Quoted 130 lines
2012/10/11 Stefan Fr?berg <[email protected]>
Quoted 125 lines
Of course, if that works, it's just a quick fix.
For proper fix you should check that you have openmp working (that is, you have libgomp) for your compiler and
if that's ok then it's obvious that rpm5 configure needs patchingRegards
Stefan11.10.2012 17:14, Stefan Fr?berg kirjoitti:
Hello Alexander
According to this
it is missing "-lgomp"
I checked the beecrypt-4.2.1 and it reveals following:
grep gomp *
acinclude.m4:
AC_SUBST(OPENMP_LIBS,"-lgomp")
configure: OPENMP_LIBS="-lgomp"So openmp depends on libgomp
Beecrypt has a configure switch --disable-openmp
Maybe you could try adding that switch into
BEECRYPT_CONF_OPTin Buildroot beecrypt.mk file,
rebuild beecrypt and then try rpm again.Best regards
Stefan11.10.2012 13:04, Alexander Khryukin kirjoitti:
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 58 lines
2012/10/10 Alexander Khryukin <[email protected]>
Quoted 43 lines
2012/10/10 Arnout Vandecappelle <[email protected]>
Quoted 22 lines · Alexander Khryukin
Quoted 4 lines
Full log
http://pastie.org/4932495It would be more relevant to post
/home/fdkit/buildroot/output/build/rpm-5.2.0/config.logAlso please post the file 'defconfig' which is generated when you do
'make savedefconfig'. This will allow us to try to reproduce.Also can you mention which BR version you're using?
However, before doing any of that, do a 'make clean' and recompile
to see if that fixes your problem.(It works for me, BTW).
Regards,
Arnout
--Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1FHi!
Thanks for the responsedefconfig http://pastie.org/5029882
config.log
Quoted 9 lines
Every time it fails at
checking whether to build with BeeCrypt library... no
configure: error: mandatory BeeCrypt library not found
when it installedQuoted 5 lines
Seems problem in
undefined reference to `GOMP_parallel_end' on 10296,1 string
Bump
Problem still exist_______________________________________________
buildroot mailing listbuildroot at busybox.nethttp://lists.busybox.net/mailman/listinfo/buildroot_______________________________________________
buildroot mailing listbuildroot at busybox.nethttp://lists.busybox.net/mailman/listinfo/buildroot
Quoted 4 lines
Quoted 1 line
that you have openmp working
How i can check this?
Stegan, thanks for your answer i prepared patch
Makefile.am 2009-07-10 12:52:47.000000000 +0200 renamed from Makefile.am~ 2009-07-04 14:07:12.000000000 +0200 +0 -0
@@ -52,7 +52,7 @@ libbeecrypt_la_SOURCES = aes.c base64.c beecrypt.c blockmode.c blockpad.c
blowfish.c dhies.c dldp.c dlkp.c dlpk.c dlsvdp-dh.c dsa.c elgamal.c endianness.c entropy.c fips186.c hmac.c hmacmd5.c hmacsha1.c hmacsha224.c hmacsha256.c md4.c md5.c hmacsha384.c hmacsha512.c memchunk.c mp.c mpbarrett.c mpnumber.c mpprime.c mtprng.c pkcs1.c pkcs12.c ripemd128.c ripemd160.c ripemd256.c ripemd320.c rsa.c rsakp.c rsapk.c sha1.c sha224.c sha256.c sha384.c sha512.c sha2k32.c sha2k64.c timestamp.c cppglue.cxx
libbeecrypt_la_DEPENDENCIES = $(BEECRYPT_OBJECTS)
-libbeecrypt_la_LIBADD = blowfishopt.lo mpopt.lo sha1opt.lo $(OPENMP_LIBS) +libbeecrypt_la_LIBADD = blowfishopt.lo mpopt.lo sha1opt.lo -lgomp
libbeecrypt_la_LDFLAGS = -no-undefined -version-info
$(LIBBEECRYPT_LT_CURRENT):$(LIBBEECRYPT_LT_REVISION):$(LIBBEECRYPT_LT_AGE)
EXTRA_DIST = BENCHMARKS BUGS CONTRIBUTORS README.WIN32 autogen.sh
Looks like now it's ok
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121011/27f58ad7/attachment-0001.html>
On 10/10/12 16:40, Alexander Khryukin wrote:
[snip]
Quoted 3 lines
config.log
/home/user/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/sysroot/usr/lib/libbeecrypt.so: undefined reference to `GOMP_parallel_sections_start'
Your cross-toolchain seems to contain OpenMP support. Either add --disable-openmp to BEECRYPT_CONF_OPT, or if you
really need OpenMP support in beecrypt, add LIBS=-lgomp to RPM_CONF_ENV.
Maybe we should just add --disable-openmp to BEECRYPT_CONF_OPT?
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
2012/10/12 Arnout Vandecappelle <[email protected]>
Quoted 25 lines · Alexander Khryukin
[snip]
Quoted 4 lines
config.log
/home/user/buildroot/output/**host/usr/arm-buildroot-linux-**gnueabi/sysroot/usr/lib/**libbeecrypt.so: undefined reference to `GOMP_parallel_sections_start'Your cross-toolchain seems to contain OpenMP support. Either add
--disable-openmp toBEECRYPT_CONF_OPT, or if you really need OpenMP support in beecrypt, add LIBS=-lgomp toRPM_CONF_ENV.Maybe we should just add --disable-openmp to
BEECRYPT_CONF_OPT?Regards,
Arnout
--
Quoted 8 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
I wrote a simple patch that enables support of -lgomp instead of $LIB_GOMP
macro
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121012/37c7a58a/attachment-0001.html>
Quoted 1 line · Alexander Khryukin
I wrote a simple patch that enables support of -lgomp instead of $LIB_GOMP macro
LIB_GOMP should have been set to -lgomp if openmp is enabled, so that patch
wouldn't do much AFAICS.
Oh, but now I see the real issue: in beecrypt's acinclude.m4, they check for
$OPENMP_CFLAGS to decide if OPENMP_LIBS should be set. But you don't need to pass any option to enable openmp, so $OPENMP_CFLAGS is empty... Instead it should check for $ac_cv_prog_c_openmp.
Since AFAIK we have no toolchain that supports OpenMP in buildroot, I'm not
sure if it makes sense to patch it in buildroot...
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286540 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Quoted 11 lines · Arnout Vandecappelle
LIB_GOMPshould have been set to -lgomp if openmp is enabled, so that
patch
wouldn't do much AFAICS.Oh, but now I see the real issue: in beecrypt's acinclude.m4, they
check for
$OPENMP_CFLAGS to decide ifOPENMP_LIBSshould be set. But you don't need to
pass any option to enable openmp, so $OPENMP_CFLAGS is empty... Instead it should check for $ac_cv_prog_c_openmp.
Quoted 3 lines
Since AFAIK we have no toolchain that supports OpenMP in buildroot, I'm
not
sure if it makes sense to patch it in buildroot...
The internal toolchain has support/an option for OpenMP (BR2_ENABLE_GCC_OPENMP).
So it should probably be handled in the beecrypt package. Regards.