Skip to contentSkip to conversation

xen/kbdif: Sync up with the canonical definition in Xen

PATCH Superseded Oleksandr Andrushchenko 2 participants 7 messages May 18, 2018

Subsystems (3)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/2 xen/kbdif: Sync up with the canonical definition in Xen

From: Oleksandr Andrushchenko <[email protected]>

This is the sync up with the canonical definition of the keyboard protocol in Xen:
1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file.

2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS:
- set feature-disable-keyboard to 1 if no keyboard device needs to be created
- set feature-disable-pointer to 1 if no pointer device needs to be created

---
 include/xen/interface/io/kbdif.h | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
include/xen/interface/io/kbdif.h +30 -0
index 2a9510ade701..808ef7d02a65 100644
@@ -51,6 +51,18 @@
  * corresponding entries in XenStore and puts 1 as the value of the entry.
  * If a feature is not supported then 0 must be set or feature entry omitted.
  *
+ * feature-disable-keyboard
+ *      Values:         <uint>
+ *
+ *      If there is no need to expose a virtual keyboard device by the
+ *      frontend then this must be set to 1.
+ *
+ * feature-disable-pointer
+ *      Values:         <uint>
+ *
+ *      If there is no need to expose a virtual pointer device by the
+ *      frontend then this must be set to 1.
+ *
  * feature-abs-pointer
  *      Values:         <uint>
  *
@@ -63,6 +75,13 @@
  *      Backends, which support reporting of multi-touch events
  *      should set this to 1.
  *
+ * feature-raw-pointer
+ *      Values:        <uint>
+ *
+ *      Backends, which support reporting raw (unscaled) absolute coordinates
+ *      for pointer devices should set this to 1. Raw (unscaled) values have
+ *      a range of [0, 0x7fff].
+ *
  *------------------------- Pointer Device Parameters ------------------------
  *
  * width
@@ -98,6 +117,13 @@
  *
  *      Request backend to report multi-touch events.
  *
+ * request-raw-pointer
+ *      Values:         <uint>
+ *
+ *      Request backend to report raw unscaled absolute pointer coordinates.
+ *      This option is only valid if request-abs-pointer is also set.
+ *      Raw unscaled coordinates have the range [0, 0x7fff]
+ *
  *----------------------- Request Transport Parameters -----------------------
  *
  * event-channel
@@ -163,9 +189,13 @@
 
 #define XENKBD_DRIVER_NAME		"vkbd"
 
+#define XENKBD_FIELD_FEAT_DSBL_KEYBRD	"feature-disable-keyboard"
+#define XENKBD_FIELD_FEAT_DSBL_POINTER	"feature-disable-pointer"
 #define XENKBD_FIELD_FEAT_ABS_POINTER	"feature-abs-pointer"
+#define XENKBD_FIELD_FEAT_RAW_POINTER	"feature-raw-pointer"
 #define XENKBD_FIELD_FEAT_MTOUCH	"feature-multi-touch"
 #define XENKBD_FIELD_REQ_ABS_POINTER	"request-abs-pointer"
+#define XENKBD_FIELD_REQ_RAW_POINTER	"request-raw-pointer"
 #define XENKBD_FIELD_REQ_MTOUCH		"request-multi-touch"
 #define XENKBD_FIELD_RING_GREF		"page-gref"
 #define XENKBD_FIELD_EVT_CHANNEL	"event-channel"
Signature · 1 line
2.17.0
#1 lore raw

PATCH v4 2/2 Input: xen-kbdfront - allow better run-time configuration

From: Oleksandr Andrushchenko <[email protected]>

It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created:
- set "feature-disable-keyboard" to 1 if no keyboard device needs to be created
- set "feature-disable-pointer" to 1 if no pointer device needs to be created
Keep old behavior by default.

---
Changes since v3:
- do not connect backend if all virtual devices are disabled (Dmitry)

Changes since v2:
- based on XenStore kbdif features to control which devices are exposed instead of module parameters.

 drivers/input/misc/xen-kbdfront.c | 177 ++++++++++++++++++------------
 1 file changed, 106 insertions(+), 71 deletions(-)
drivers/input/misc/xen-kbdfront.c +106 -71
index d91f3b1c5375..0e8926c75559 100644
@@ -63,6 +63,9 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
 static void xenkbd_handle_motion_event(struct xenkbd_info *info,
 				       struct xenkbd_motion *motion)
 {
+	if (unlikely(!info->ptr))
+		return;
+
 	input_report_rel(info->ptr, REL_X, motion->rel_x);
 	input_report_rel(info->ptr, REL_Y, motion->rel_y);
 	if (motion->rel_z)
@@ -73,6 +76,9 @@ static void xenkbd_handle_motion_event(struct xenkbd_info *info,
 static void xenkbd_handle_position_event(struct xenkbd_info *info,
 					 struct xenkbd_position *pos)
 {
+	if (unlikely(!info->ptr))
+		return;
+
 	input_report_abs(info->ptr, ABS_X, pos->abs_x);
 	input_report_abs(info->ptr, ABS_Y, pos->abs_y);
 	if (pos->rel_z)
@@ -97,6 +103,9 @@ static void xenkbd_handle_key_event(struct xenkbd_info *info,
 		return;
 	}
 
+	if (unlikely(!dev))
+		return;
+
 	input_event(dev, EV_KEY, key->keycode, value);
 	input_sync(dev);
 }
@@ -192,7 +201,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
 				  const struct xenbus_device_id *id)
 {
 	int ret, i;
-	unsigned int abs, touch;
+	bool with_mtouch, with_kbd, with_ptr;
 	struct xenkbd_info *info;
 	struct input_dev *kbd, *ptr, *mtouch;
 
@@ -211,93 +220,114 @@ static int xenkbd_probe(struct xenbus_device *dev,
 	if (!info->page)
 		goto error_nomem;
 
-	/* Set input abs params to match backend screen res */
-	abs = xenbus_read_unsigned(dev->otherend,
-				   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
-	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_WIDTH,
-						  ptr_size[KPARAM_X]);
-	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_HEIGHT,
-						  ptr_size[KPARAM_Y]);
-	if (abs) {
-		ret = xenbus_write(XBT_NIL, dev->nodename,
-				   XENKBD_FIELD_REQ_ABS_POINTER, "1");
-		if (ret) {
-			pr_warn("xenkbd: can't request abs-pointer\n");
-			abs = 0;
-		}
-	}
+	/*
+	 * The below are reverse logic, e.g. if the feature is set, then
+	 * do not expose the corresponding virtual device.
+	 */
+	with_kbd = !xenbus_read_unsigned(dev->nodename,
+					 XENKBD_FIELD_FEAT_DSBL_KEYBRD, 0);
+
+	with_ptr = !xenbus_read_unsigned(dev->nodename,
+					 XENKBD_FIELD_FEAT_DSBL_POINTER, 0);
 
-	touch = xenbus_read_unsigned(dev->nodename,
-				     XENKBD_FIELD_FEAT_MTOUCH, 0);
-	if (touch) {
+	/* Direct logic: if set, then create multi-touch device. */
+	with_mtouch = xenbus_read_unsigned(dev->nodename,
+					   XENKBD_FIELD_FEAT_MTOUCH, 0);
+	if (with_mtouch) {
 		ret = xenbus_write(XBT_NIL, dev->nodename,
 				   XENKBD_FIELD_REQ_MTOUCH, "1");
 		if (ret) {
 			pr_warn("xenkbd: can't request multi-touch");
-			touch = 0;
+			with_mtouch = 0;
 		}
 	}
 
 	/* keyboard */
-	kbd = input_allocate_device();
-	if (!kbd)
-		goto error_nomem;
-	kbd->name = "Xen Virtual Keyboard";
-	kbd->phys = info->phys;
-	kbd->id.bustype = BUS_PCI;
-	kbd->id.vendor = 0x5853;
-	kbd->id.product = 0xffff;
-
-	__set_bit(EV_KEY, kbd->evbit);
-	for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
-		__set_bit(i, kbd->keybit);
-	for (i = KEY_OK; i < KEY_MAX; i++)
-		__set_bit(i, kbd->keybit);
-
-	ret = input_register_device(kbd);
-	if (ret) {
-		input_free_device(kbd);
-		xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
-		goto error;
+	if (with_kbd) {
+		kbd = input_allocate_device();
+		if (!kbd)
+			goto error_nomem;
+		kbd->name = "Xen Virtual Keyboard";
+		kbd->phys = info->phys;
+		kbd->id.bustype = BUS_PCI;
+		kbd->id.vendor = 0x5853;
+		kbd->id.product = 0xffff;
+
+		__set_bit(EV_KEY, kbd->evbit);
+		for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
+			__set_bit(i, kbd->keybit);
+		for (i = KEY_OK; i < KEY_MAX; i++)
+			__set_bit(i, kbd->keybit);
+
+		ret = input_register_device(kbd);
+		if (ret) {
+			input_free_device(kbd);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(kbd)");
+			goto error;
+		}
+		info->kbd = kbd;
 	}
-	info->kbd = kbd;
 
 	/* pointing device */
-	ptr = input_allocate_device();
-	if (!ptr)
-		goto error_nomem;
-	ptr->name = "Xen Virtual Pointer";
-	ptr->phys = info->phys;
-	ptr->id.bustype = BUS_PCI;
-	ptr->id.vendor = 0x5853;
-	ptr->id.product = 0xfffe;
-
-	if (abs) {
-		__set_bit(EV_ABS, ptr->evbit);
-		input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
-		input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
-	} else {
-		input_set_capability(ptr, EV_REL, REL_X);
-		input_set_capability(ptr, EV_REL, REL_Y);
-	}
-	input_set_capability(ptr, EV_REL, REL_WHEEL);
+	if (with_ptr) {
+		unsigned int abs;
+
+		/* Set input abs params to match backend screen res */
+		abs = xenbus_read_unsigned(dev->otherend,
+					   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+		ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_WIDTH,
+							  ptr_size[KPARAM_X]);
+		ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_HEIGHT,
+							  ptr_size[KPARAM_Y]);
+		if (abs) {
+			ret = xenbus_write(XBT_NIL, dev->nodename,
+					   XENKBD_FIELD_REQ_ABS_POINTER, "1");
+			if (ret) {
+				pr_warn("xenkbd: can't request abs-pointer\n");
+				abs = 0;
+			}
+		}
 
-	__set_bit(EV_KEY, ptr->evbit);
-	for (i = BTN_LEFT; i <= BTN_TASK; i++)
-		__set_bit(i, ptr->keybit);
+		ptr = input_allocate_device();
+		if (!ptr)
+			goto error_nomem;
+		ptr->name = "Xen Virtual Pointer";
+		ptr->phys = info->phys;
+		ptr->id.bustype = BUS_PCI;
+		ptr->id.vendor = 0x5853;
+		ptr->id.product = 0xfffe;
+
+		if (abs) {
+			__set_bit(EV_ABS, ptr->evbit);
+			input_set_abs_params(ptr, ABS_X, 0,
+					     ptr_size[KPARAM_X], 0, 0);
+			input_set_abs_params(ptr, ABS_Y, 0,
+					     ptr_size[KPARAM_Y], 0, 0);
+		} else {
+			input_set_capability(ptr, EV_REL, REL_X);
+			input_set_capability(ptr, EV_REL, REL_Y);
+		}
+		input_set_capability(ptr, EV_REL, REL_WHEEL);
 
-	ret = input_register_device(ptr);
-	if (ret) {
-		input_free_device(ptr);
-		xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
-		goto error;
+		__set_bit(EV_KEY, ptr->evbit);
+		for (i = BTN_LEFT; i <= BTN_TASK; i++)
+			__set_bit(i, ptr->keybit);
+
+		ret = input_register_device(ptr);
+		if (ret) {
+			input_free_device(ptr);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(ptr)");
+			goto error;
+		}
+		info->ptr = ptr;
 	}
-	info->ptr = ptr;
 
 	/* multi-touch device */
-	if (touch) {
+	if (with_mtouch) {
 		int num_cont, width, height;
 
 		mtouch = input_allocate_device();
@@ -346,6 +376,11 @@ static int xenkbd_probe(struct xenbus_device *dev,
 		info->mtouch = mtouch;
 	}
 
+	if (!(with_kbd | with_ptr | with_mtouch)) {
+		ret = -ENXIO;
+		goto error;
+	}
+
 	ret = xenkbd_connect_backend(dev, info);
 	if (ret < 0)
 		goto error;
Signature · 1 line
2.17.0
#2 lore raw

Re: [PATCH v4 2/2] Input: xen-kbdfront - allow better run-time configuration

Sorry for top posting.

Due to a bug in the test used to verify this patch I need to make two more changes, please see inline.

Please ignore this patch for now, I will send v5 soon.

Sorry for inconvenience,
Oleksandr

Quoted 91 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created:
- set "feature-disable-keyboard" to 1 if no keyboard device needs to be created
- set "feature-disable-pointer" to 1 if no pointer device needs to be created
Keep old behavior by default.

---
Changes since v3:
- do not connect backend if all virtual devices are disabled (Dmitry)

Changes since v2:
- based on XenStore kbdif features to control which devices are exposed instead of module parameters.

  drivers/input/misc/xen-kbdfront.c | 177 ++++++++++++++++++------------
  1 file changed, 106 insertions(+), 71 deletions(-)
drivers/input/misc/xen-kbdfront.c +10 -13
index d91f3b1c5375..0e8926c75559 100644
@@ -63,6 +63,9 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
  static void xenkbd_handle_motion_event(struct xenkbd_info *info,
  				       struct xenkbd_motion *motion)
  {
+	if (unlikely(!info->ptr))
+		return;
+
  	input_report_rel(info->ptr, REL_X, motion->rel_x);
  	input_report_rel(info->ptr, REL_Y, motion->rel_y);
  	if (motion->rel_z)
@@ -73,6 +76,9 @@ static void xenkbd_handle_motion_event(struct xenkbd_info *info,
  static void xenkbd_handle_position_event(struct xenkbd_info *info,
  					 struct xenkbd_position *pos)
  {
+	if (unlikely(!info->ptr))
+		return;
+
  	input_report_abs(info->ptr, ABS_X, pos->abs_x);
  	input_report_abs(info->ptr, ABS_Y, pos->abs_y);
  	if (pos->rel_z)
@@ -97,6 +103,9 @@ static void xenkbd_handle_key_event(struct xenkbd_info *info,
  		return;
  	}
 
+	if (unlikely(!dev))
+		return;
+
  	input_event(dev, EV_KEY, key->keycode, value);
  	input_sync(dev);
  }
@@ -192,7 +201,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
  				  const struct xenbus_device_id *id)
  {
  	int ret, i;
-	unsigned int abs, touch;
+	bool with_mtouch, with_kbd, with_ptr;
  	struct xenkbd_info *info;
  	struct input_dev *kbd, *ptr, *mtouch;
 
@@ -211,93 +220,114 @@ static int xenkbd_probe(struct xenbus_device *dev,
  	if (!info->page)
  		goto error_nomem;
 
-	/* Set input abs params to match backend screen res */
-	abs = xenbus_read_unsigned(dev->otherend,
-				   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
-	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_WIDTH,
-						  ptr_size[KPARAM_X]);
-	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_HEIGHT,
-						  ptr_size[KPARAM_Y]);
-	if (abs) {
-		ret = xenbus_write(XBT_NIL, dev->nodename,
-				   XENKBD_FIELD_REQ_ABS_POINTER, "1");

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 227

Quoted 10 lines
drivers/input/misc/xen-kbdfront.c +5 -5
-		if (ret) {
-			pr_warn("xenkbd: can't request abs-pointer\n");
-			abs = 0;
-		}
-	}
+	/*
+	 * The below are reverse logic, e.g. if the feature is set, then
+	 * do not expose the corresponding virtual device.
+	 */
+	with_kbd = !xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 230

Quoted 3 lines
drivers/input/misc/xen-kbdfront.c +3 -0
+					 XENKBD_FIELD_FEAT_DSBL_KEYBRD, 0);
+
+	with_ptr = !xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 234

Quoted 7 lines
drivers/input/misc/xen-kbdfront.c +3 -3
+					 XENKBD_FIELD_FEAT_DSBL_POINTER, 0);
 
-	touch = xenbus_read_unsigned(dev->nodename,
-				     XENKBD_FIELD_FEAT_MTOUCH, 0);
-	if (touch) {
+	/* Direct logic: if set, then create multi-touch device. */
+	with_mtouch = xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

Quoted 161 lines
drivers/input/misc/xen-kbdfront.c +85 -50
+					   XENKBD_FIELD_FEAT_MTOUCH, 0);
+	if (with_mtouch) {
  		ret = xenbus_write(XBT_NIL, dev->nodename,
  				   XENKBD_FIELD_REQ_MTOUCH, "1");
  		if (ret) {
  			pr_warn("xenkbd: can't request multi-touch");
-			touch = 0;
+			with_mtouch = 0;
  		}
  	}
 
  	/* keyboard */
-	kbd = input_allocate_device();
-	if (!kbd)
-		goto error_nomem;
-	kbd->name = "Xen Virtual Keyboard";
-	kbd->phys = info->phys;
-	kbd->id.bustype = BUS_PCI;
-	kbd->id.vendor = 0x5853;
-	kbd->id.product = 0xffff;
-
-	__set_bit(EV_KEY, kbd->evbit);
-	for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
-		__set_bit(i, kbd->keybit);
-	for (i = KEY_OK; i < KEY_MAX; i++)
-		__set_bit(i, kbd->keybit);
-
-	ret = input_register_device(kbd);
-	if (ret) {
-		input_free_device(kbd);
-		xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
-		goto error;
+	if (with_kbd) {
+		kbd = input_allocate_device();
+		if (!kbd)
+			goto error_nomem;
+		kbd->name = "Xen Virtual Keyboard";
+		kbd->phys = info->phys;
+		kbd->id.bustype = BUS_PCI;
+		kbd->id.vendor = 0x5853;
+		kbd->id.product = 0xffff;
+
+		__set_bit(EV_KEY, kbd->evbit);
+		for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
+			__set_bit(i, kbd->keybit);
+		for (i = KEY_OK; i < KEY_MAX; i++)
+			__set_bit(i, kbd->keybit);
+
+		ret = input_register_device(kbd);
+		if (ret) {
+			input_free_device(kbd);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(kbd)");
+			goto error;
+		}
+		info->kbd = kbd;
  	}
-	info->kbd = kbd;
 
  	/* pointing device */
-	ptr = input_allocate_device();
-	if (!ptr)
-		goto error_nomem;
-	ptr->name = "Xen Virtual Pointer";
-	ptr->phys = info->phys;
-	ptr->id.bustype = BUS_PCI;
-	ptr->id.vendor = 0x5853;
-	ptr->id.product = 0xfffe;
-
-	if (abs) {
-		__set_bit(EV_ABS, ptr->evbit);
-		input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
-		input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
-	} else {
-		input_set_capability(ptr, EV_REL, REL_X);
-		input_set_capability(ptr, EV_REL, REL_Y);
-	}
-	input_set_capability(ptr, EV_REL, REL_WHEEL);
+	if (with_ptr) {
+		unsigned int abs;
+
+		/* Set input abs params to match backend screen res */
+		abs = xenbus_read_unsigned(dev->otherend,
+					   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+		ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_WIDTH,
+							  ptr_size[KPARAM_X]);
+		ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_HEIGHT,
+							  ptr_size[KPARAM_Y]);
+		if (abs) {
+			ret = xenbus_write(XBT_NIL, dev->nodename,
+					   XENKBD_FIELD_REQ_ABS_POINTER, "1");
+			if (ret) {
+				pr_warn("xenkbd: can't request abs-pointer\n");
+				abs = 0;
+			}
+		}
 
-	__set_bit(EV_KEY, ptr->evbit);
-	for (i = BTN_LEFT; i <= BTN_TASK; i++)
-		__set_bit(i, ptr->keybit);
+		ptr = input_allocate_device();
+		if (!ptr)
+			goto error_nomem;
+		ptr->name = "Xen Virtual Pointer";
+		ptr->phys = info->phys;
+		ptr->id.bustype = BUS_PCI;
+		ptr->id.vendor = 0x5853;
+		ptr->id.product = 0xfffe;
+
+		if (abs) {
+			__set_bit(EV_ABS, ptr->evbit);
+			input_set_abs_params(ptr, ABS_X, 0,
+					     ptr_size[KPARAM_X], 0, 0);
+			input_set_abs_params(ptr, ABS_Y, 0,
+					     ptr_size[KPARAM_Y], 0, 0);
+		} else {
+			input_set_capability(ptr, EV_REL, REL_X);
+			input_set_capability(ptr, EV_REL, REL_Y);
+		}
+		input_set_capability(ptr, EV_REL, REL_WHEEL);
 
-	ret = input_register_device(ptr);
-	if (ret) {
-		input_free_device(ptr);
-		xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
-		goto error;
+		__set_bit(EV_KEY, ptr->evbit);
+		for (i = BTN_LEFT; i <= BTN_TASK; i++)
+			__set_bit(i, ptr->keybit);
+
+		ret = input_register_device(ptr);
+		if (ret) {
+			input_free_device(ptr);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(ptr)");
+			goto error;
+		}
+		info->ptr = ptr;
  	}
-	info->ptr = ptr;
 
  	/* multi-touch device */
-	if (touch) {
+	if (with_mtouch) {
  		int num_cont, width, height;
 
  		mtouch = input_allocate_device();
@@ -346,6 +376,11 @@ static int xenkbd_probe(struct xenbus_device *dev,
  		info->mtouch = mtouch;
  	}
 
+	if (!(with_kbd | with_ptr | with_mtouch)) {
+		ret = -ENXIO;
+		goto error;
+	}
+
  	ret = xenkbd_connect_backend(dev, info);
  	if (ret < 0)
  		goto error;
#3 lore raw

Re: [PATCH v4 2/2] Input: xen-kbdfront - allow better run-time configuration

In reply to Oleksandr Andrushchenko

Sorry for top posting.

Due to a bug in the test used to verify this patch I need to make two more changes, please see inline.

Please ignore this patch for now, I will send v5 soon.

Sorry for inconvenience,
Oleksandr

Quoted 91 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created:
- set "feature-disable-keyboard" to 1 if no keyboard device needs to be created
- set "feature-disable-pointer" to 1 if no pointer device needs to be created
Keep old behavior by default.

---
Changes since v3:
- do not connect backend if all virtual devices are disabled (Dmitry)

Changes since v2:
- based on XenStore kbdif features to control which devices are exposed instead of module parameters.

  drivers/input/misc/xen-kbdfront.c | 177 ++++++++++++++++++------------
  1 file changed, 106 insertions(+), 71 deletions(-)
drivers/input/misc/xen-kbdfront.c +10 -13
index d91f3b1c5375..0e8926c75559 100644
@@ -63,6 +63,9 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
  static void xenkbd_handle_motion_event(struct xenkbd_info *info,
  				       struct xenkbd_motion *motion)
  {
+	if (unlikely(!info->ptr))
+		return;
+
  	input_report_rel(info->ptr, REL_X, motion->rel_x);
  	input_report_rel(info->ptr, REL_Y, motion->rel_y);
  	if (motion->rel_z)
@@ -73,6 +76,9 @@ static void xenkbd_handle_motion_event(struct xenkbd_info *info,
  static void xenkbd_handle_position_event(struct xenkbd_info *info,
  					 struct xenkbd_position *pos)
  {
+	if (unlikely(!info->ptr))
+		return;
+
  	input_report_abs(info->ptr, ABS_X, pos->abs_x);
  	input_report_abs(info->ptr, ABS_Y, pos->abs_y);
  	if (pos->rel_z)
@@ -97,6 +103,9 @@ static void xenkbd_handle_key_event(struct xenkbd_info *info,
  		return;
  	}
 
+	if (unlikely(!dev))
+		return;
+
  	input_event(dev, EV_KEY, key->keycode, value);
  	input_sync(dev);
  }
@@ -192,7 +201,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
  				  const struct xenbus_device_id *id)
  {
  	int ret, i;
-	unsigned int abs, touch;
+	bool with_mtouch, with_kbd, with_ptr;
  	struct xenkbd_info *info;
  	struct input_dev *kbd, *ptr, *mtouch;
 
@@ -211,93 +220,114 @@ static int xenkbd_probe(struct xenbus_device *dev,
  	if (!info->page)
  		goto error_nomem;
 
-	/* Set input abs params to match backend screen res */
-	abs = xenbus_read_unsigned(dev->otherend,
-				   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
-	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_WIDTH,
-						  ptr_size[KPARAM_X]);
-	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_HEIGHT,
-						  ptr_size[KPARAM_Y]);
-	if (abs) {
-		ret = xenbus_write(XBT_NIL, dev->nodename,
-				   XENKBD_FIELD_REQ_ABS_POINTER, "1");

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 227

Quoted 10 lines
drivers/input/misc/xen-kbdfront.c +5 -5
-		if (ret) {
-			pr_warn("xenkbd: can't request abs-pointer\n");
-			abs = 0;
-		}
-	}
+	/*
+	 * The below are reverse logic, e.g. if the feature is set, then
+	 * do not expose the corresponding virtual device.
+	 */
+	with_kbd = !xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 230

Quoted 3 lines
drivers/input/misc/xen-kbdfront.c +3 -0
+					 XENKBD_FIELD_FEAT_DSBL_KEYBRD, 0);
+
+	with_ptr = !xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 234

Quoted 7 lines
drivers/input/misc/xen-kbdfront.c +3 -3
+					 XENKBD_FIELD_FEAT_DSBL_POINTER, 0);
 
-	touch = xenbus_read_unsigned(dev->nodename,
-				     XENKBD_FIELD_FEAT_MTOUCH, 0);
-	if (touch) {
+	/* Direct logic: if set, then create multi-touch device. */
+	with_mtouch = xenbus_read_unsigned(dev->nodename,

According to the kbdif protocol this must be "dev->otherend"

Quoted 151 lines
drivers/input/misc/xen-kbdfront.c +80 -50
+					   XENKBD_FIELD_FEAT_MTOUCH, 0);
+	if (with_mtouch) {
  		ret = xenbus_write(XBT_NIL, dev->nodename,
  				   XENKBD_FIELD_REQ_MTOUCH, "1");
  		if (ret) {
  			pr_warn("xenkbd: can't request multi-touch");
-			touch = 0;
+			with_mtouch = 0;
  		}
  	}
 
  	/* keyboard */
-	kbd = input_allocate_device();
-	if (!kbd)
-		goto error_nomem;
-	kbd->name = "Xen Virtual Keyboard";
-	kbd->phys = info->phys;
-	kbd->id.bustype = BUS_PCI;
-	kbd->id.vendor = 0x5853;
-	kbd->id.product = 0xffff;
-
-	__set_bit(EV_KEY, kbd->evbit);
-	for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
-		__set_bit(i, kbd->keybit);
-	for (i = KEY_OK; i < KEY_MAX; i++)
-		__set_bit(i, kbd->keybit);
-
-	ret = input_register_device(kbd);
-	if (ret) {
-		input_free_device(kbd);
-		xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
-		goto error;
+	if (with_kbd) {
+		kbd = input_allocate_device();
+		if (!kbd)
+			goto error_nomem;
+		kbd->name = "Xen Virtual Keyboard";
+		kbd->phys = info->phys;
+		kbd->id.bustype = BUS_PCI;
+		kbd->id.vendor = 0x5853;
+		kbd->id.product = 0xffff;
+
+		__set_bit(EV_KEY, kbd->evbit);
+		for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
+			__set_bit(i, kbd->keybit);
+		for (i = KEY_OK; i < KEY_MAX; i++)
+			__set_bit(i, kbd->keybit);
+
+		ret = input_register_device(kbd);
+		if (ret) {
+			input_free_device(kbd);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(kbd)");
+			goto error;
+		}
+		info->kbd = kbd;
  	}
-	info->kbd = kbd;
 
  	/* pointing device */
-	ptr = input_allocate_device();
-	if (!ptr)
-		goto error_nomem;
-	ptr->name = "Xen Virtual Pointer";
-	ptr->phys = info->phys;
-	ptr->id.bustype = BUS_PCI;
-	ptr->id.vendor = 0x5853;
-	ptr->id.product = 0xfffe;
-
-	if (abs) {
-		__set_bit(EV_ABS, ptr->evbit);
-		input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
-		input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
-	} else {
-		input_set_capability(ptr, EV_REL, REL_X);
-		input_set_capability(ptr, EV_REL, REL_Y);
-	}
-	input_set_capability(ptr, EV_REL, REL_WHEEL);
+	if (with_ptr) {
+		unsigned int abs;
+
+		/* Set input abs params to match backend screen res */
+		abs = xenbus_read_unsigned(dev->otherend,
+					   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+		ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_WIDTH,
+							  ptr_size[KPARAM_X]);
+		ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_HEIGHT,
+							  ptr_size[KPARAM_Y]);
+		if (abs) {
+			ret = xenbus_write(XBT_NIL, dev->nodename,
+					   XENKBD_FIELD_REQ_ABS_POINTER, "1");
+			if (ret) {
+				pr_warn("xenkbd: can't request abs-pointer\n");
+				abs = 0;
+			}
+		}
 
-	__set_bit(EV_KEY, ptr->evbit);
-	for (i = BTN_LEFT; i <= BTN_TASK; i++)
-		__set_bit(i, ptr->keybit);
+		ptr = input_allocate_device();
+		if (!ptr)
+			goto error_nomem;
+		ptr->name = "Xen Virtual Pointer";
+		ptr->phys = info->phys;
+		ptr->id.bustype = BUS_PCI;
+		ptr->id.vendor = 0x5853;
+		ptr->id.product = 0xfffe;
+
+		if (abs) {
+			__set_bit(EV_ABS, ptr->evbit);
+			input_set_abs_params(ptr, ABS_X, 0,
+					     ptr_size[KPARAM_X], 0, 0);
+			input_set_abs_params(ptr, ABS_Y, 0,
+					     ptr_size[KPARAM_Y], 0, 0);
+		} else {
+			input_set_capability(ptr, EV_REL, REL_X);
+			input_set_capability(ptr, EV_REL, REL_Y);
+		}
+		input_set_capability(ptr, EV_REL, REL_WHEEL);
 
-	ret = input_register_device(ptr);
-	if (ret) {
-		input_free_device(ptr);
-		xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
-		goto error;
+		__set_bit(EV_KEY, ptr->evbit);
+		for (i = BTN_LEFT; i <= BTN_TASK; i++)
+			__set_bit(i, ptr->keybit);
+
+		ret = input_register_device(ptr);
+		if (ret) {
+			input_free_device(ptr);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(ptr)");
+			goto error;
+		}
+		info->ptr = ptr;
  	}
-	info->ptr = ptr;
 
  	/* multi-touch device */
-	if (touch) {
+	if (with_mtouch) {
  		int num_cont, width, height;
 
  		mtouch = input_allocate_device();
@@ -346,6 +376,11 @@ static int xenkbd_probe(struct xenbus_device *dev,
  		info->mtouch = mtouch;

drivers/input/misc/xen-kbdfront.c static int xenkbd_probe(struct xenbus_device *dev, · line 386

Quoted 10 lines
drivers/input/misc/xen-kbdfront.c +5 -0
  	}
 
+	if (!(with_kbd | with_ptr | with_mtouch)) {
+		ret = -ENXIO;
+		goto error;
+	}
+
  	ret = xenkbd_connect_backend(dev, info);
  	if (ret < 0)
  		goto error;

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel

#4 lore raw

PATCH v4 2/2 Input: xen-kbdfront - allow better run-time configuration

In reply to Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

It is now only possible to control if multi-touch virtual device is created or not (via the corresponding XenStore entries), but keyboard and pointer devices are always created. In some cases this is not desirable. For example, if virtual keyboard device is exposed to Android then the latter won't automatically show on-screen keyboard as it expects that a physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to configure which virtual devices are created:
- set "feature-disable-keyboard" to 1 if no keyboard device needs to be created
- set "feature-disable-pointer" to 1 if no pointer device needs to be created
Keep old behavior by default.

---
Changes since v3:
- do not connect backend if all virtual devices are disabled (Dmitry)

Changes since v2:
- based on XenStore kbdif features to control which devices are exposed instead of module parameters.

 drivers/input/misc/xen-kbdfront.c | 177 ++++++++++++++++++------------
 1 file changed, 106 insertions(+), 71 deletions(-)
drivers/input/misc/xen-kbdfront.c +106 -71
index d91f3b1c5375..0e8926c75559 100644
@@ -63,6 +63,9 @@ static void xenkbd_disconnect_backend(struct xenkbd_info *);
 static void xenkbd_handle_motion_event(struct xenkbd_info *info,
 				       struct xenkbd_motion *motion)
 {
+	if (unlikely(!info->ptr))
+		return;
+
 	input_report_rel(info->ptr, REL_X, motion->rel_x);
 	input_report_rel(info->ptr, REL_Y, motion->rel_y);
 	if (motion->rel_z)
@@ -73,6 +76,9 @@ static void xenkbd_handle_motion_event(struct xenkbd_info *info,
 static void xenkbd_handle_position_event(struct xenkbd_info *info,
 					 struct xenkbd_position *pos)
 {
+	if (unlikely(!info->ptr))
+		return;
+
 	input_report_abs(info->ptr, ABS_X, pos->abs_x);
 	input_report_abs(info->ptr, ABS_Y, pos->abs_y);
 	if (pos->rel_z)
@@ -97,6 +103,9 @@ static void xenkbd_handle_key_event(struct xenkbd_info *info,
 		return;
 	}
 
+	if (unlikely(!dev))
+		return;
+
 	input_event(dev, EV_KEY, key->keycode, value);
 	input_sync(dev);
 }
@@ -192,7 +201,7 @@ static int xenkbd_probe(struct xenbus_device *dev,
 				  const struct xenbus_device_id *id)
 {
 	int ret, i;
-	unsigned int abs, touch;
+	bool with_mtouch, with_kbd, with_ptr;
 	struct xenkbd_info *info;
 	struct input_dev *kbd, *ptr, *mtouch;
 
@@ -211,93 +220,114 @@ static int xenkbd_probe(struct xenbus_device *dev,
 	if (!info->page)
 		goto error_nomem;
 
-	/* Set input abs params to match backend screen res */
-	abs = xenbus_read_unsigned(dev->otherend,
-				   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
-	ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_WIDTH,
-						  ptr_size[KPARAM_X]);
-	ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
-						  XENKBD_FIELD_HEIGHT,
-						  ptr_size[KPARAM_Y]);
-	if (abs) {
-		ret = xenbus_write(XBT_NIL, dev->nodename,
-				   XENKBD_FIELD_REQ_ABS_POINTER, "1");
-		if (ret) {
-			pr_warn("xenkbd: can't request abs-pointer\n");
-			abs = 0;
-		}
-	}
+	/*
+	 * The below are reverse logic, e.g. if the feature is set, then
+	 * do not expose the corresponding virtual device.
+	 */
+	with_kbd = !xenbus_read_unsigned(dev->nodename,
+					 XENKBD_FIELD_FEAT_DSBL_KEYBRD, 0);
+
+	with_ptr = !xenbus_read_unsigned(dev->nodename,
+					 XENKBD_FIELD_FEAT_DSBL_POINTER, 0);
 
-	touch = xenbus_read_unsigned(dev->nodename,
-				     XENKBD_FIELD_FEAT_MTOUCH, 0);
-	if (touch) {
+	/* Direct logic: if set, then create multi-touch device. */
+	with_mtouch = xenbus_read_unsigned(dev->nodename,
+					   XENKBD_FIELD_FEAT_MTOUCH, 0);
+	if (with_mtouch) {
 		ret = xenbus_write(XBT_NIL, dev->nodename,
 				   XENKBD_FIELD_REQ_MTOUCH, "1");
 		if (ret) {
 			pr_warn("xenkbd: can't request multi-touch");
-			touch = 0;
+			with_mtouch = 0;
 		}
 	}
 
 	/* keyboard */
-	kbd = input_allocate_device();
-	if (!kbd)
-		goto error_nomem;
-	kbd->name = "Xen Virtual Keyboard";
-	kbd->phys = info->phys;
-	kbd->id.bustype = BUS_PCI;
-	kbd->id.vendor = 0x5853;
-	kbd->id.product = 0xffff;
-
-	__set_bit(EV_KEY, kbd->evbit);
-	for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
-		__set_bit(i, kbd->keybit);
-	for (i = KEY_OK; i < KEY_MAX; i++)
-		__set_bit(i, kbd->keybit);
-
-	ret = input_register_device(kbd);
-	if (ret) {
-		input_free_device(kbd);
-		xenbus_dev_fatal(dev, ret, "input_register_device(kbd)");
-		goto error;
+	if (with_kbd) {
+		kbd = input_allocate_device();
+		if (!kbd)
+			goto error_nomem;
+		kbd->name = "Xen Virtual Keyboard";
+		kbd->phys = info->phys;
+		kbd->id.bustype = BUS_PCI;
+		kbd->id.vendor = 0x5853;
+		kbd->id.product = 0xffff;
+
+		__set_bit(EV_KEY, kbd->evbit);
+		for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
+			__set_bit(i, kbd->keybit);
+		for (i = KEY_OK; i < KEY_MAX; i++)
+			__set_bit(i, kbd->keybit);
+
+		ret = input_register_device(kbd);
+		if (ret) {
+			input_free_device(kbd);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(kbd)");
+			goto error;
+		}
+		info->kbd = kbd;
 	}
-	info->kbd = kbd;
 
 	/* pointing device */
-	ptr = input_allocate_device();
-	if (!ptr)
-		goto error_nomem;
-	ptr->name = "Xen Virtual Pointer";
-	ptr->phys = info->phys;
-	ptr->id.bustype = BUS_PCI;
-	ptr->id.vendor = 0x5853;
-	ptr->id.product = 0xfffe;
-
-	if (abs) {
-		__set_bit(EV_ABS, ptr->evbit);
-		input_set_abs_params(ptr, ABS_X, 0, ptr_size[KPARAM_X], 0, 0);
-		input_set_abs_params(ptr, ABS_Y, 0, ptr_size[KPARAM_Y], 0, 0);
-	} else {
-		input_set_capability(ptr, EV_REL, REL_X);
-		input_set_capability(ptr, EV_REL, REL_Y);
-	}
-	input_set_capability(ptr, EV_REL, REL_WHEEL);
+	if (with_ptr) {
+		unsigned int abs;
+
+		/* Set input abs params to match backend screen res */
+		abs = xenbus_read_unsigned(dev->otherend,
+					   XENKBD_FIELD_FEAT_ABS_POINTER, 0);
+		ptr_size[KPARAM_X] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_WIDTH,
+							  ptr_size[KPARAM_X]);
+		ptr_size[KPARAM_Y] = xenbus_read_unsigned(dev->otherend,
+							  XENKBD_FIELD_HEIGHT,
+							  ptr_size[KPARAM_Y]);
+		if (abs) {
+			ret = xenbus_write(XBT_NIL, dev->nodename,
+					   XENKBD_FIELD_REQ_ABS_POINTER, "1");
+			if (ret) {
+				pr_warn("xenkbd: can't request abs-pointer\n");
+				abs = 0;
+			}
+		}
 
-	__set_bit(EV_KEY, ptr->evbit);
-	for (i = BTN_LEFT; i <= BTN_TASK; i++)
-		__set_bit(i, ptr->keybit);
+		ptr = input_allocate_device();
+		if (!ptr)
+			goto error_nomem;
+		ptr->name = "Xen Virtual Pointer";
+		ptr->phys = info->phys;
+		ptr->id.bustype = BUS_PCI;
+		ptr->id.vendor = 0x5853;
+		ptr->id.product = 0xfffe;
+
+		if (abs) {
+			__set_bit(EV_ABS, ptr->evbit);
+			input_set_abs_params(ptr, ABS_X, 0,
+					     ptr_size[KPARAM_X], 0, 0);
+			input_set_abs_params(ptr, ABS_Y, 0,
+					     ptr_size[KPARAM_Y], 0, 0);
+		} else {
+			input_set_capability(ptr, EV_REL, REL_X);
+			input_set_capability(ptr, EV_REL, REL_Y);
+		}
+		input_set_capability(ptr, EV_REL, REL_WHEEL);
 
-	ret = input_register_device(ptr);
-	if (ret) {
-		input_free_device(ptr);
-		xenbus_dev_fatal(dev, ret, "input_register_device(ptr)");
-		goto error;
+		__set_bit(EV_KEY, ptr->evbit);
+		for (i = BTN_LEFT; i <= BTN_TASK; i++)
+			__set_bit(i, ptr->keybit);
+
+		ret = input_register_device(ptr);
+		if (ret) {
+			input_free_device(ptr);
+			xenbus_dev_fatal(dev, ret,
+					 "input_register_device(ptr)");
+			goto error;
+		}
+		info->ptr = ptr;
 	}
-	info->ptr = ptr;
 
 	/* multi-touch device */
-	if (touch) {
+	if (with_mtouch) {
 		int num_cont, width, height;
 
 		mtouch = input_allocate_device();
@@ -346,6 +376,11 @@ static int xenkbd_probe(struct xenbus_device *dev,
 		info->mtouch = mtouch;
 	}
 
+	if (!(with_kbd | with_ptr | with_mtouch)) {
+		ret = -ENXIO;
+		goto error;
+	}
+
 	ret = xenkbd_connect_backend(dev, info);
 	if (ret < 0)
 		goto error;
Signature · 7 lines
2.17.0


_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
maintainer Reviewed-by on v4 1/2
#5 lore raw
In reply to Oleksandr Andrushchenko
Quoted 14 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

This is the sync up with the canonical definition of the keyboard protocol in Xen:
1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file.

2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS:
- set feature-disable-keyboard to 1 if no keyboard device needs to be created
- set feature-disable-pointer to 1 if no pointer device needs to be created

Quoted 2 lines

Juergen

maintainer Reviewed-by on v4 1/2
#6 lore raw
In reply to Oleksandr Andrushchenko
Quoted 14 lines · Oleksandr Andrushchenko

From: Oleksandr Andrushchenko <[email protected]>

This is the sync up with the canonical definition of the keyboard protocol in Xen:
1. Add missing string constants for {feature|request}-raw-pointer to align with the rest of the interface file.

2. Add new XenStore feature fields, so it is possible to individually control set of exposed virtual devices for each guest OS:
- set feature-disable-keyboard to 1 if no keyboard device needs to be created
- set feature-disable-pointer to 1 if no pointer device needs to be created

Quoted 2 lines

Juergen

_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel