Skip to contentSkip to conversation

mfd: tps65910: use regmap irq framework for interrupt

PATCH Applied Laxman Dewangan 2 participants 9 messages Oct 10, 2012 – Oct 15, 2012

Subsystems (4)

v2 of 3 Applied Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover mfd: tps65910: use regmap irq framework for interrupt

This patch series has following change:
- Use regmap irq framework for interrupt registration. Corrected the register bit definition for interrupts.
- Move the irq table to tps65910.c and get rid of tps65910-irq.c.
- Raarrange the init sequence of different sub moduled of tps65910 like irq, clock and then mfd devices.
- Export the irq domain handle from regmap to use in mfd driver.
- Pass the irq domain in mfd_add_devices to have proper interrupt mapping for sub devices like RTC.

Changes from V1:
- rearrange patch on which older patch3 become the new patch 1.
- Add stub for new api in the regmap.
- Add empty line if paragraph change in description.

Laxman Dewangan (5):
mfd: tps65910: Initialize mfd devices after all initialization done
mfd: tps65910: use regmap irq framework for interrupt support
mfd: tps65910: move interrupt implementation code to mfd file
regmap: add API to get irq_domain from regmap irq
mfd: tps65910: pass irq_domain when adding mfd sub devices

 drivers/base/regmap/regmap-irq.c |   16 +++
 drivers/mfd/Makefile             |    2 +-
 drivers/mfd/tps65910-irq.c       |  260 --------------------------------------
 drivers/mfd/tps65910.c           |  233 +++++++++++++++++++++++++++++++++--
 include/linux/mfd/tps65910.h     |  143 +++++++++++++++-------
 include/linux/regmap.h           |    8 ++
 6 files changed, 349 insertions(+), 313 deletions(-)
 delete mode 100644 drivers/mfd/tps65910-irq.c
#1 lore raw

PATCH v2 1/5 mfd: tps65910: Initialize mfd devices after all initialization done

Add sub devices of tps65910 after all initialization like interrupt, clock etc. is done. This will make sure that require data gets initialized properly before sub devices probe's get called.

---
Changes from V:
- Rearrange patches so that this patch become first in place of third of series.
- Added Reviewed by: Mark as it is already revieved in patch V1.

 drivers/mfd/tps65910.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)
drivers/mfd/tps65910.c +8 -8
index 0d79ce2..27fbbe5 100644
@@ -279,14 +279,6 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = mfd_add_devices(tps65910->dev, -1,
-			      tps65910s, ARRAY_SIZE(tps65910s),
-			      NULL, 0, NULL);
-	if (ret < 0) {
-		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
-		return ret;
-	}
-
 	init_data->irq = pmic_plat_data->irq;
 	init_data->irq_base = pmic_plat_data->irq_base;
 
@@ -299,6 +291,14 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 		pm_power_off = tps65910_power_off;
 	}
 
+	ret = mfd_add_devices(tps65910->dev, -1,
+			      tps65910s, ARRAY_SIZE(tps65910s),
+			      NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
+		return ret;
+	}
+
 	return ret;
 }
 
Signature · 1 line
1.7.1.1
#2 lore raw

PATCH v2 2/5 mfd: tps65910: use regmap irq framework for interrupt support

In reply to Laxman Dewangan

Implement irq support of tps65910 with regmap irq framework in place of implementing locally.
This reduces the code size significantly and easy to maintain.

---
No change from V1, just rearrange this patch.
It was already reviwed by Mark and hence adding his reviewed by.

 drivers/mfd/tps65910-irq.c   |  375 ++++++++++++++++++++----------------------
 include/linux/mfd/tps65910.h |  139 +++++++++++-----
 2 files changed, 278 insertions(+), 236 deletions(-)
drivers/mfd/tps65910-irq.c +179 -196
index 09aab3e..554543a 100644
@@ -24,171 +24,184 @@
 #include <linux/gpio.h>
 #include <linux/mfd/tps65910.h>
 
-/*
- * This is a threaded IRQ handler so can access I2C/SPI.  Since all
- * interrupts are clear on read the IRQ line will be reasserted and
- * the physical IRQ will be handled again if another interrupt is
- * asserted while we run - in the normal course of events this is a
- * rare occurrence so we save I2C/SPI reads.  We're also assuming that
- * it's rare to get lots of interrupts firing simultaneously so try to
- * minimise I/O.
- */
-static irqreturn_t tps65910_irq(int irq, void *irq_data)
-{
-	struct tps65910 *tps65910 = irq_data;
-	unsigned int reg;
-	u32 irq_sts;
-	u32 irq_mask;
-	int i;
-
-	tps65910_reg_read(tps65910, TPS65910_INT_STS, &reg);
-	irq_sts = reg;
-	tps65910_reg_read(tps65910, TPS65910_INT_STS2, &reg);
-	irq_sts |= reg << 8;
-	switch (tps65910_chip_id(tps65910)) {
-	case TPS65911:
-		tps65910_reg_read(tps65910, TPS65910_INT_STS3, &reg);
-		irq_sts |= reg << 16;
-	}
-
-	tps65910_reg_read(tps65910, TPS65910_INT_MSK, &reg);
-	irq_mask = reg;
-	tps65910_reg_read(tps65910, TPS65910_INT_MSK2, &reg);
-	irq_mask |= reg << 8;
-	switch (tps65910_chip_id(tps65910)) {
-	case TPS65911:
-		tps65910_reg_read(tps65910, TPS65910_INT_MSK3, &reg);
-		irq_mask |= reg << 16;
-	}
-
-	irq_sts &= ~irq_mask;
-
-	if (!irq_sts)
-		return IRQ_NONE;
-
-	for (i = 0; i < tps65910->irq_num; i++) {
-
-		if (!(irq_sts & (1 << i)))
-			continue;
-
-		handle_nested_irq(irq_find_mapping(tps65910->domain, i));
-	}
-
-	/* Write the STS register back to clear IRQs we handled */
-	reg = irq_sts & 0xFF;
-	irq_sts >>= 8;
-	tps65910_reg_write(tps65910, TPS65910_INT_STS, reg);
-	reg = irq_sts & 0xFF;
-	tps65910_reg_write(tps65910, TPS65910_INT_STS2, reg);
-	switch (tps65910_chip_id(tps65910)) {
-	case TPS65911:
-		reg = irq_sts >> 8;
-		tps65910_reg_write(tps65910, TPS65910_INT_STS3, reg);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void tps65910_irq_lock(struct irq_data *data)
-{
-	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
-
-	mutex_lock(&tps65910->irq_lock);
-}
-
-static void tps65910_irq_sync_unlock(struct irq_data *data)
-{
-	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
-	u32 reg_mask;
-	unsigned int reg;
-
-	tps65910_reg_read(tps65910, TPS65910_INT_MSK, &reg);
-	reg_mask = reg;
-	tps65910_reg_read(tps65910, TPS65910_INT_MSK2, &reg);
-	reg_mask |= reg << 8;
-	switch (tps65910_chip_id(tps65910)) {
-	case TPS65911:
-		tps65910_reg_read(tps65910, TPS65910_INT_MSK3, &reg);
-		reg_mask |= reg << 16;
-	}
 
-	if (tps65910->irq_mask != reg_mask) {
-		reg = tps65910->irq_mask & 0xFF;
-		tps65910_reg_write(tps65910, TPS65910_INT_MSK, reg);
-		reg = tps65910->irq_mask >> 8 & 0xFF;
-		tps65910_reg_write(tps65910, TPS65910_INT_MSK2, reg);
-		switch (tps65910_chip_id(tps65910)) {
-		case TPS65911:
-			reg = tps65910->irq_mask >> 16;
-			tps65910_reg_write(tps65910, TPS65910_INT_MSK3, reg);
-		}
-	}
-	mutex_unlock(&tps65910->irq_lock);
-}
-
-static void tps65910_irq_enable(struct irq_data *data)
-{
-	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
-
-	tps65910->irq_mask &= ~(1 << data->hwirq);
-}
-
-static void tps65910_irq_disable(struct irq_data *data)
-{
-	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
-
-	tps65910->irq_mask |= (1 << data->hwirq);
-}
+static const struct regmap_irq tps65911_irqs[] = {
+	/* INT_STS */
+	[TPS65911_IRQ_PWRHOLD_F] = {
+		.mask = INT_MSK_PWRHOLD_F_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_VBAT_VMHI] = {
+		.mask = INT_MSK_VMBHI_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_PWRON] = {
+		.mask = INT_MSK_PWRON_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_PWRON_LP] = {
+		.mask = INT_MSK_PWRON_LP_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_PWRHOLD_R] = {
+		.mask = INT_MSK_PWRHOLD_R_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_HOTDIE] = {
+		.mask = INT_MSK_HOTDIE_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_RTC_ALARM] = {
+		.mask = INT_MSK_RTC_ALARM_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65911_IRQ_RTC_PERIOD] = {
+		.mask = INT_MSK_RTC_PERIOD_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[TPS65911_IRQ_GPIO0_R] = {
+		.mask = INT_MSK2_GPIO0_R_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO0_F] = {
+		.mask = INT_MSK2_GPIO0_F_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO1_R] = {
+		.mask = INT_MSK2_GPIO1_R_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO1_F] = {
+		.mask = INT_MSK2_GPIO1_F_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO2_R] = {
+		.mask = INT_MSK2_GPIO2_R_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO2_F] = {
+		.mask = INT_MSK2_GPIO2_F_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO3_R] = {
+		.mask = INT_MSK2_GPIO3_R_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65911_IRQ_GPIO3_F] = {
+		.mask = INT_MSK2_GPIO3_F_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+
+	/* INT_STS3 */
+	[TPS65911_IRQ_GPIO4_R] = {
+		.mask = INT_MSK3_GPIO4_R_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_GPIO4_F] = {
+		.mask = INT_MSK3_GPIO4_F_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_GPIO5_R] = {
+		.mask = INT_MSK3_GPIO5_R_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_GPIO5_F] = {
+		.mask = INT_MSK3_GPIO5_F_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_WTCHDG] = {
+		.mask = INT_MSK3_WTCHDG_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_VMBCH2_H] = {
+		.mask = INT_MSK3_VMBCH2_H_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_VMBCH2_L] = {
+		.mask = INT_MSK3_VMBCH2_L_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+	[TPS65911_IRQ_PWRDN] = {
+		.mask = INT_MSK3_PWRDN_IT_MSK_MASK,
+		.reg_offset = 2,
+	},
+};
 
-#ifdef CONFIG_PM_SLEEP
-static int tps65910_irq_set_wake(struct irq_data *data, unsigned int enable)
-{
-	struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data);
-	return irq_set_irq_wake(tps65910->chip_irq, enable);
-}
-#else
-#define tps65910_irq_set_wake NULL
-#endif
+static const struct regmap_irq tps65910_irqs[] = {
+	/* INT_STS */
+	[TPS65910_IRQ_VBAT_VMBDCH] = {
+		.mask = TPS65910_INT_MSK_VMBDCH_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_VBAT_VMHI] = {
+		.mask = TPS65910_INT_MSK_VMBHI_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_PWRON] = {
+		.mask = TPS65910_INT_MSK_PWRON_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_PWRON_LP] = {
+		.mask = TPS65910_INT_MSK_PWRON_LP_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_PWRHOLD] = {
+		.mask = TPS65910_INT_MSK_PWRHOLD_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_HOTDIE] = {
+		.mask = TPS65910_INT_MSK_HOTDIE_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_RTC_ALARM] = {
+		.mask = TPS65910_INT_MSK_RTC_ALARM_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+	[TPS65910_IRQ_RTC_PERIOD] = {
+		.mask = TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_MASK,
+		.reg_offset = 0,
+	},
+
+	/* INT_STS2 */
+	[TPS65910_IRQ_GPIO_R] = {
+		.mask = TPS65910_INT_MSK2_GPIO0_F_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+	[TPS65910_IRQ_GPIO_F] = {
+		.mask = TPS65910_INT_MSK2_GPIO0_R_IT_MSK_MASK,
+		.reg_offset = 1,
+	},
+};
 
-static struct irq_chip tps65910_irq_chip = {
+static struct regmap_irq_chip tps65911_irq_chip = {
 	.name = "tps65910",
-	.irq_bus_lock = tps65910_irq_lock,
-	.irq_bus_sync_unlock = tps65910_irq_sync_unlock,
-	.irq_disable = tps65910_irq_disable,
-	.irq_enable = tps65910_irq_enable,
-	.irq_set_wake = tps65910_irq_set_wake,
+	.irqs = tps65911_irqs,
+	.num_irqs = ARRAY_SIZE(tps65911_irqs),
+	.num_regs = 3,
+	.irq_reg_stride = 2,
+	.status_base = TPS65910_INT_STS,
+	.mask_base = TPS65910_INT_MSK,
+	.ack_base = TPS65910_INT_MSK,
 };
 
-static int tps65910_irq_map(struct irq_domain *h, unsigned int virq,
-				irq_hw_number_t hw)
-{
-	struct tps65910 *tps65910 = h->host_data;
-
-	irq_set_chip_data(virq, tps65910);
-	irq_set_chip_and_handler(virq, &tps65910_irq_chip, handle_edge_irq);
-	irq_set_nested_thread(virq, 1);
-
-	/* ARM needs us to explicitly flag the IRQ as valid
-	 * and will set them noprobe when we do so. */
-#ifdef CONFIG_ARM
-	set_irq_flags(virq, IRQF_VALID);
-#else
-	irq_set_noprobe(virq);
-#endif
-
-	return 0;
-}
-
-static struct irq_domain_ops tps65910_domain_ops = {
-	.map	= tps65910_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
+static struct regmap_irq_chip tps65910_irq_chip = {
+	.name = "tps65910",
+	.irqs = tps65910_irqs,
+	.num_irqs = ARRAY_SIZE(tps65910_irqs),
+	.num_regs = 2,
+	.irq_reg_stride = 2,
+	.status_base = TPS65910_INT_STS,
+	.mask_base = TPS65910_INT_MSK,
+	.ack_base = TPS65910_INT_MSK,
 };
 
 int tps65910_irq_init(struct tps65910 *tps65910, int irq,
 		    struct tps65910_platform_data *pdata)
 {
-	int ret;
-	int flags = IRQF_ONESHOT;
+	int ret = 0;
+	static struct regmap_irq_chip *tps6591x_irqs_chip;
 
 	if (!irq) {
 		dev_warn(tps65910->dev, "No interrupt support, no core IRQ\n");
@@ -200,61 +213,31 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq,
 		return -EINVAL;
 	}
 
+
 	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
-		tps65910->irq_num = TPS65910_NUM_IRQ;
+		tps6591x_irqs_chip = &tps65910_irq_chip;
 		break;
 	case TPS65911:
-		tps65910->irq_num = TPS65911_NUM_IRQ;
+		tps6591x_irqs_chip = &tps65911_irq_chip;
 		break;
 	}
 
-	if (pdata->irq_base > 0) {
-		pdata->irq_base = irq_alloc_descs(pdata->irq_base, 0,
-					tps65910->irq_num, -1);
-		if (pdata->irq_base < 0) {
-			dev_warn(tps65910->dev, "Failed to alloc IRQs: %d\n",
-					pdata->irq_base);
-			return pdata->irq_base;
-		}
-	}
-
-	tps65910->irq_mask = 0xFFFFFF;
-
-	mutex_init(&tps65910->irq_lock);
 	tps65910->chip_irq = irq;
-	tps65910->irq_base = pdata->irq_base;
-
-	if (pdata->irq_base > 0)
-		tps65910->domain = irq_domain_add_legacy(tps65910->dev->of_node,
-					tps65910->irq_num,
-					pdata->irq_base,
-					0,
-					&tps65910_domain_ops, tps65910);
-	else
-		tps65910->domain = irq_domain_add_linear(tps65910->dev->of_node,
-					tps65910->irq_num,
-					&tps65910_domain_ops, tps65910);
-
-	if (!tps65910->domain) {
-		dev_err(tps65910->dev, "Failed to create IRQ domain\n");
-		return -ENOMEM;
+	ret = regmap_add_irq_chip(tps65910->regmap, tps65910->chip_irq,
+		IRQF_ONESHOT, pdata->irq_base,
+		tps6591x_irqs_chip, &tps65910->irq_data);
+	if (ret < 0) {
+		dev_warn(tps65910->dev,
+				"Failed to add irq_chip %d\n", ret);
+		return ret;
 	}
-
-	ret = request_threaded_irq(irq, NULL, tps65910_irq, flags,
-				   "tps65910", tps65910);
-
-	irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
-
-	if (ret != 0)
-		dev_err(tps65910->dev, "Failed to request IRQ: %d\n", ret);
-
 	return ret;
 }
 
 int tps65910_irq_exit(struct tps65910 *tps65910)
 {
-	if (tps65910->chip_irq)
-		free_irq(tps65910->chip_irq, tps65910);
+	if (tps65910->chip_irq > 0)
+		regmap_del_irq_chip(tps65910->chip_irq, tps65910->irq_data);
 	return 0;
 }
include/linux/mfd/tps65910.h +99 -40

198 lines not on this page · raw message

Signature · 1 line
1.7.1.1
#3 lore raw

PATCH v2 3/5 mfd: tps65910: move interrupt implementation code to mfd file

In reply to Laxman Dewangan

In place of implementing the irq support in separate file, moving implementation to main mfd file.
The irq files only contains the table and init steps only and does not need extra file to have this only for this purpose.

---
No change from V1, just rearrange this patch.
It was already reviwed by Mark and hence adding his reviewed by.

 drivers/mfd/Makefile         |    2 +-
 drivers/mfd/tps65910-irq.c   |  243 ------------------------------------------
 drivers/mfd/tps65910.c       |  216 +++++++++++++++++++++++++++++++++++++
 include/linux/mfd/tps65910.h |    4 -
 4 files changed, 217 insertions(+), 248 deletions(-)
 delete mode 100644 drivers/mfd/tps65910-irq.c
drivers/mfd/Makefile +1 -1
index d8ccb63..47811a5 100644
@@ -52,7 +52,7 @@ obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o
 obj-$(CONFIG_TPS6507X)		+= tps6507x.o
 obj-$(CONFIG_MFD_TPS65217)	+= tps65217.o
-obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o tps65910-irq.o
+obj-$(CONFIG_MFD_TPS65910)	+= tps65910.o
 tps65912-objs                   := tps65912-core.o tps65912-irq.o
 obj-$(CONFIG_MFD_TPS65912)	+= tps65912.o
 obj-$(CONFIG_MFD_TPS65912_I2C)	+= tps65912-i2c.o
drivers/mfd/tps65910-irq.c deleted +0 -243

243 lines not on this page · raw message

drivers/mfd/tps65910.c +216 -0

228 lines not on this page · raw message

include/linux/mfd/tps65910.h +0 -4
index b564ac2..0b16903 100644
@@ -915,10 +915,6 @@ struct tps65910_platform_data {
 	int irq_base;
 };
 
-int tps65910_irq_init(struct tps65910 *tps65910, int irq,
-		struct tps65910_platform_data *pdata);
-int tps65910_irq_exit(struct tps65910 *tps65910);
-
 static inline int tps65910_chip_id(struct tps65910 *tps65910)
 {
 	return tps65910->id;
Signature · 1 line
1.7.1.1
#4 lore raw

PATCH v2 4/5 regmap: add API to get irq_domain from regmap irq

In reply to Laxman Dewangan

Add API regmap_irq_get_irq_domain() for getting the irq domain from regmap irq. The irq domain created on result of regmap_add_irq_chip() from driver.

This API is useful in mfd driver when driver add mfd sub devices. The sub devices IRQs can be passed through IORESOURCE_IRQ and it need to be mapped properly with device irq domain. The mfd_add_devices() creates mapping when adding sub devices and for this it is require to have irq domain.

---
Changes from V1:
- Add stubbing of new API.
- Add empty line between paragraph.

 drivers/base/regmap/regmap-irq.c |   16 ++++++++++++++++
 include/linux/regmap.h           |    8 ++++++++
 2 files changed, 24 insertions(+), 0 deletions(-)
drivers/base/regmap/regmap-irq.c +16 -0
index 5b6b1d8..70bce5f 100644
@@ -458,3 +458,19 @@ int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq)
 	return irq_create_mapping(data->domain, irq);
 }
 EXPORT_SYMBOL_GPL(regmap_irq_get_virq);
+
+/**
+ * regmap_irq_get_irq_domain(): Return IRQ domain for of the interrupt added.
+ *
+ * Useful for drivers who locally create mapping from irq_domain which is
+ * created on result of the call regmap_add_irq_chip().
+ *
+ * @data: regmap_irq controller to operate on.
+ */
+struct irq_domain *regmap_irq_get_irq_domain(struct regmap_irq_chip_data *data)
+{
+	if (data)
+		return data->domain;
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(regmap_irq_get_irq_domain);
include/linux/regmap.h +8 -0
index e3bcc3f..d3216a7 100644
@@ -317,6 +317,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
 int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
 int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq);
+struct irq_domain *regmap_irq_get_irq_domain(struct regmap_irq_chip_data *data);
 
 #else
 
@@ -433,6 +434,13 @@ static inline struct regmap *dev_get_regmap(struct device *dev,
 	return NULL;
 }
 
+static inline struct irq_domain *regmap_irq_get_irq_domain(
+			struct regmap_irq_chip_data *data)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return NULL;
+}
+
 #endif
 
 #endif
Signature · 1 line
1.7.1.1
Applied
#5 lore raw

Re: [PATCH V2 4/5] regmap: add API to get irq_domain from regmap irq

Quoted 3 lines · Laxman Dewangan

Add API regmap_irq_get_irq_domain() for getting the irq domain from regmap irq. The irq domain created on result of regmap_add_irq_chip() from driver.

Applied, thanks. I'll push out a signed tag

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git tags/irq

when I can (hopefully later today) for merging into other trees.

#6 lore raw

Re: [PATCH V2 4/5] regmap: add API to get irq_domain from regmap irq

In reply to Laxman Dewangan
Quoted 3 lines · Laxman Dewangan

Add API regmap_irq_get_irq_domain() for getting the irq domain from regmap irq. The irq domain created on result of regmap_add_irq_chip() from driver.

Sorry, when doing the merge down after the merge window I realised that I already have a patch there adding a function regmap_irq_get_domain() which has been sitting there for a while now, I think it was just fat fingers that meant it didn't make v3.7.

#7 lore raw

Re: [PATCH V2 4/5] regmap: add API to get irq_domain from regmap irq

Quoted 8 lines · Mark Brown
Quoted 3 lines · Laxman Dewangan

Add API regmap_irq_get_irq_domain() for getting the irq domain from regmap irq. The irq domain created on result of regmap_add_irq_chip() from driver.

Sorry, when doing the merge down after the merge window I realised that I already have a patch there adding a function regmap_irq_get_domain() which has been sitting there for a while now, I think it was just fat fingers that meant it didn't make v3.7.

Thanks, then I need to create to the patch5 based on this new API. So patch 1 to 3 can be applied directly without any new patches.

#8 lore raw

PATCH v2 5/5 mfd: tps65910: pass irq_domain when adding mfd sub devices

In reply to Laxman Dewangan

When adding the sub device "tps65910-rtc", is it passed the IO resource IRQ for the interrupt number. This interrupt needs to map in the device irq domain. Pass the irq domain of device in mfd_add_devices() so that proper irq mapping can be done when adding the sub device RTC.

---
No change from V1.

 drivers/mfd/tps65910.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/mfd/tps65910.c +2 -1
index d4d4eb5..4c4fc53 100644
@@ -509,7 +509,8 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c,
 
 	ret = mfd_add_devices(tps65910->dev, -1,
 			      tps65910s, ARRAY_SIZE(tps65910s),
-			      NULL, 0, NULL);
+			      NULL, 0,
+			      regmap_irq_get_irq_domain(tps65910->irq_data));
 	if (ret < 0) {
 		dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret);
 		return ret;
Signature · 1 line
1.7.1.1