Skip to contentSkip to conversation

mx25pdk: Include CONFIG_MX25

PATCH New Fabio Estevam 3 participants 10 messages Oct 15, 2012 – Oct 22, 2012 Char and misc drivers

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH v2 1/5 mx25pdk: Include CONFIG_MX25

From: Fabio Estevam <[email protected]>

It is necessary to include CONFIG_MX25 as several i.mx drivers handle the SoC differences based on the this config option.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- No changes

 include/configs/mx25pdk.h |    1 +
 1 file changed, 1 insertion(+)
include/configs/mx25pdk.h +1 -0
index 96c143e..2087502 100644
@@ -17,6 +17,7 @@
 
 /* High Level Configuration Options */
 
+#define CONFIG_MX25
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH v2 2/5 mx25pdk: Add esdhc support

From: Fabio Estevam <[email protected]>

mx25pdk has a SD/MMC slot connected to esdhc1.

Add support for it and allow the environment variables to be saved into SD/MMC.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v2:
- Use "esdhc_cfg[0].sdhc_clk"

 board/freescale/mx25pdk/mx25pdk.c |   53 +++++++++++++++++++++++++++++++++++++
 include/configs/mx25pdk.h         |   16 ++++++++++-
 2 files changed, 68 insertions(+), 1 deletion(-)
board/freescale/mx25pdk/mx25pdk.c +53 -0
index 4a8352f..5f7c982 100644
@@ -19,12 +19,24 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/imx25-pinmux.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+#define CARD_DETECT		IMX_GPIO_NR(2, 1)
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+	{IMX_MMC_SDHC1_BASE},
+};
+#endif
+
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */

@@ -48,6 +60,47 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	struct iomuxc_pad_ctl *padctl;
+	u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
+
+	/*
+	 * Set up the Card Detect pin.
+	 *
+	 * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15
+	 *
+	 */
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
+
+	writel(gpio_mux_mode, &muxctl->pad_a15);
+	writel(0x0, &padctl->pad_a15);
+
+	gpio_direction_input(CARD_DETECT);
+	return !gpio_get_value(CARD_DETECT);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2);
+	writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3);
+
+	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
 int checkboard(void)
 {
 	puts("Board: MX25PDK\n");
include/configs/mx25pdk.h +15 -1
index 2087502..1770521 100644
@@ -20,6 +20,7 @@
 #define CONFIG_MX25
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_TEXT_BASE		0x81200000
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO

@@ -58,9 +59,10 @@
 /* No NOR flash present */
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_NOWHERE
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* U-Boot general configuration */
 #define CONFIG_SYS_PROMPT	"MX25PDK U-Boot > "

@@ -78,6 +80,9 @@
 /* U-Boot commands */
 #include <config_cmd_default.h>
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
 
 /* Ethernet */
 #define CONFIG_FEC_MXC

@@ -86,6 +91,15 @@
 #define CONFIG_CMD_NET
 #define CONFIG_ENV_OVERWRITE
 
+/* ESDHC driver */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+#define CONFIG_DOS_PARTITION
+
 #define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
Signature · 1 line
1.7.9.5
author
#2 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH to configure the number of bytes that are used to communicate with the PMIC via I2C.

Instead of hardcoding the value, pass the number via a config option.

This will be useful for adding support for PMIC MC34704 from Freescale, which uses only one byte in its I2C protocol.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v2:
- No changes. Newly introduced in this series

 drivers/misc/pmic_fsl.c    |    2 +-
 include/configs/mx35pdk.h  |    1 +
 include/configs/mx53evk.h  |    1 +
 include/configs/mx53loco.h |    1 +
 4 files changed, 4 insertions(+), 1 deletion(-)
drivers/misc/pmic_fsl.c +1 -1
index 0ff75ed..40c448b 100644
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-	p->hw.i2c.tx_num = 3;
+	p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;
 	p->bus = I2C_PMIC;
 #else
 #error "You must select CONFIG_PMIC_SPI or CONFIG_PMIC_I2C"
include/configs/mx35pdk.h +1 -0
index 69bd654..3998d76 100644
@@ -69,6 +69,7 @@
 #define CONFIG_PMIC_I2C
 #define CONFIG_PMIC_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x08
+#define CONFIG_SYS_FSL_PMIC_I2C_LENGTH	3
 #define CONFIG_RTC_MC13XXX
 
 /*
include/configs/mx53evk.h +1 -0
index 832050e..f7b11c0 100644
@@ -59,6 +59,7 @@
 #define CONFIG_PMIC_I2C
 #define CONFIG_PMIC_FSL
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    8
+#define CONFIG_SYS_FSL_PMIC_I2C_LENGTH	3
 #define CONFIG_RTC_MC13XXX
 
 /* MMC Configs */
include/configs/mx53loco.h +1 -0
index 6a6aaa1..fd454d5 100644
@@ -96,6 +96,7 @@
 #define CONFIG_PMIC_FSL
 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR	0x48
 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x8
+#define CONFIG_SYS_FSL_PMIC_I2C_LENGTH	3
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

Am 16/10/2012 01:32, schrieb Fabio Estevam:

Quoted 5 lines

From: Fabio Estevam <[email protected]>

Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH to configure the number of bytes that are used to communicate with the PMIC via I2C.

Quoted 7 lines

Instead of hardcoding the value, pass the number via a config option.

This will be useful for adding support for PMIC MC34704 from Freescale, which uses only one byte in its I2C protocol.

Signed-off-by Fabio Estevam <[email protected]>

---

Hi Fabio,

Quoted 14 lines

Changes since v2:
- No changes. Newly introduced in this series

 drivers/misc/pmic_fsl.c    |    2 +-
 include/configs/mx35pdk.h  |    1 +
 include/configs/mx53evk.h  |    1 +
 include/configs/mx53loco.h |    1 +
 4 files changed, 4 insertions(+), 1 deletion(-)
drivers/misc/pmic_fsl.c +0 -0
index 0ff75ed..40c448b 100644

drivers/misc/pmic_fsl.c int pmic_init(void) · line 56

Quoted 5 lines
drivers/misc/pmic_fsl.c +1 -1
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-	p->hw.i2c.tx_num = 3;
+	p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

The bad thing with it is that it seems that each board can have a different value. However, this is bound to the selected pmic and not to the board. So IMHO it should not go into the board configuration file, but in the pmic specific initialization.

We share the same general code for all FSL PMIcs, so I am not sure which is the best way to do. Maybe at the pmic initialization ?

I added Lucasz in CC, because he is working on the PMIC framework making it more flexible and with the possibility to have multiple PMIC (he has a board with more as one PMIC, even if they are integrated in teh same chip).

Lucasz changed (not yet merged) the pmic startup passing the number of I2C bus. So with the new interface, we could have something like:

	pmic_init(I2C_PMIC);
 	if (pmic_detect()) {
		p = pmic_get("FSL_PMIC");

The question is if it makes sense to pass also the tx_num to the init function, and moving to a

	pmic_init(i2cbus, txnum);

or is there a more elegant way ?

Best regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#4 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

Hi Stefano,

Quoted 45 lines

Am 16/10/2012 01:32, schrieb Fabio Estevam:

Quoted 5 lines

From: Fabio Estevam <[email protected]>

Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH to configure the number of bytes that are used to communicate with the PMIC via I2C.

Quoted 8 lines

Instead of hardcoding the value, pass the number via a config option.

This will be useful for adding support for PMIC MC34704 from Freescale, which uses only one byte in its I2C protocol.

Signed-off-by Fabio Estevam <[email protected]>

---

Hi Fabio,

Quoted 14 lines

Changes since v2:
- No changes. Newly introduced in this series

 drivers/misc/pmic_fsl.c    |    2 +-
 include/configs/mx35pdk.h  |    1 +
 include/configs/mx53evk.h  |    1 +
 include/configs/mx53loco.h |    1 +
 4 files changed, 4 insertions(+), 1 deletion(-)
drivers/misc/pmic_fsl.c +0 -0
index 0ff75ed..40c448b 100644

drivers/misc/pmic_fsl.c int pmic_init(void) · line 56

Quoted 5 lines
drivers/misc/pmic_fsl.c +1 -1
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
 	p->interface = PMIC_I2C;
 	p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-	p->hw.i2c.tx_num = 3;
+	p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

The bad thing with it is that it seems that each board can have a different value. However, this is bound to the selected pmic and not to the board. So IMHO it should not go into the board configuration file, but in the pmic specific initialization.

We share the same general code for all FSL PMIcs, so I am not sure which is the best way to do. Maybe at the pmic initialization ?

Quoted 7 lines

I added Lucasz in CC, because he is working on the PMIC framework making it more flexible and with the possibility to have multiple PMIC (he has a board with more as one PMIC, even if they are integrated in teh same chip).

Lucasz changed (not yet merged) the pmic startup passing the number of I2C bus. So with the new interface, we could have something like:

I'm going to post another version of the patch in a few days.

Quoted 8 lines
	pmic_init(I2C_PMIC);
 	if (pmic_detect()) {
		p = pmic_get("FSL_PMIC");

The question is if it makes sense to pass also the tx_num to the init function, and moving to a

	pmic_init(i2cbus, txnum);

I'd like to avoid passing more data than necessary for the pmic_init. I will investigate how it can be solved.

Quoted 6 lines

or is there a more elegant way ?

Best regards,
Stefano

Signature · 5 lines
Best regards,

Lukasz Majewski

Samsung Poland R&D Center | Linux Platform Group
author
#5 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

In reply to Stefano Babic
Quoted 5 lines · Stefano Babic
Quoted 5 lines
drivers/misc/pmic_fsl.c +0 -0
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
      p->interface = PMIC_I2C;
Quoted 8 lines

drivers/misc/pmic_fsl.c int pmic_init(void) · line 56

Quoted 3 lines
drivers/misc/pmic_fsl.c +1 -1
      p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-     p->hw.i2c.tx_num = 3;
+     p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

The bad thing with it is that it seems that each board can have a different value. However, this is bound to the selected pmic and not to the board. So IMHO it should not go into the board configuration file, but in the pmic specific initialization.

Ok, understood.

What about putting CONFIG_SYS_FSL_PMIC_I2C_LENGTH inside the PMIC include file, such as
include/dialog_pmic.h
include/mc13783.h
include/mc13892.h ?

Thanks,

Fabio Estevam

#6 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

Hi Fabio,

Quoted 17 lines
Quoted 5 lines · Stefano Babic
Quoted 5 lines
drivers/misc/pmic_fsl.c +0 -0
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
      p->interface = PMIC_I2C;
Quoted 8 lines

drivers/misc/pmic_fsl.c int pmic_init(void) · line 56

Quoted 3 lines
drivers/misc/pmic_fsl.c +1 -1
      p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-     p->hw.i2c.tx_num = 3;
+     p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

The bad thing with it is that it seems that each board can have a different value. However, this is bound to the selected pmic and not to the board. So IMHO it should not go into the board configuration file, but in the pmic specific initialization.

Quoted 8 lines

Ok, understood.

What about putting CONFIG_SYS_FSL_PMIC_I2C_LENGTH inside the PMIC include file, such as
include/dialog_pmic.h
include/mc13783.h
include/mc13892.h ?

I totally agree.

This definition looks like PMIC device specific and shall be defined at proper *.h file (as you proposed).

Moreover the
p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

shall be assigned at per pmic instantiation:

int pmic_init(bus)
{
...
p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;
...

}

This should solve your problem.

Signature · 5 lines
Best regards,

Lukasz Majewski

Samsung Poland R&D Center | Linux Platform Group
#7 lore raw

PATCH v2 3/5 pmic_fsl: Introduce CONFIG_SYS_FSL_PMIC_I2C_LENGTH

In reply to Fabio Estevam

Am 22/10/2012 17:22, schrieb Fabio Estevam:

Quoted 16 lines · Stefano Babic
Quoted 14 lines

drivers/misc/pmic_fsl.c int pmic_init(void) · line 56

Quoted 9 lines
drivers/misc/pmic_fsl.c +1 -1
@@ -53,7 +53,7 @@ int pmic_init(void)
 #elif defined(CONFIG_PMIC_I2C)
      p->interface = PMIC_I2C;
      p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
-     p->hw.i2c.tx_num = 3;
+     p->hw.i2c.tx_num = CONFIG_SYS_FSL_PMIC_I2C_LENGTH;

The bad thing with it is that it seems that each board can have a different value. However, this is bound to the selected pmic and not to the board. So IMHO it should not go into the board configuration file, but in the pmic specific initialization.

Quoted 7 lines

Ok, understood.

What about putting CONFIG_SYS_FSL_PMIC_I2C_LENGTH inside the PMIC include file, such as
include/dialog_pmic.h
include/mc13783.h
include/mc13892.h ?

Apart changing the name (the prefix CONFIG_SYS_ should be not used), I think it is a praticable solution.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
author
#8 lore raw

PATCH v2 4/5 pmic: Add support for mc34704

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

Add the register layout for the MC34704 PMIC from Freescale.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v2:
- No changes. Newly introduced in this series

 include/mc34704.h |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 include/mc34704.h
include/mc34704.h new file +49 -0
new file mode 100644
index 0000000..a0bb91a
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __MC34704_H__
+#define __MC34704_H__
+
+enum {
+	MC34704_RESERVED0_REG = 0,	/* 0x00 */
+	MC34704_GENERAL1_REG,		/* 0x01 */
+	MC34704_GENERAL2_REG,		/* 0x02 */
+	MC34704_GENERAL3_REG,		/* 0x03 */
+	MC34704_RESERVED4_REG,		/* 0x04 */
+	MC34704_VGSET2_REG,		/* 0x05 */
+	MC34704_REG2SET1_REG,		/* 0x06 */
+	MC34704_REG2SET2_REG,		/* 0x07 */
+	MC34704_REG3SET1_REG,		/* 0x08 */
+	MC34704_REG3SET2_REG,		/* 0x09 */
+	MC34704_REG4SET1_REG,		/* 0x0a */
+	MC34704_REG4SET2_REG,		/* 0x0b */
+	MC34704_REG5SET1_REG,		/* 0x0c */
+	MC34704_REG5SET2_REG,		/* 0x0d */
+	MC34704_REG5SET3_REG,		/* 0x0e */
+	MC34704_RESERVEDF_REG,		/* 0x0f */
+	MC34704_RESERVED10_REG,		/* 0x10 */
+	MC34704_RESERVED11_REG,		/* 0x11 */
+	MC34704_RESERVED12_REG,		/* 0x12 */
+	MC34704_FSW2SET_REG,		/* 0x13 */
+	MC34704_RESERVED14_REG,		/* 0x14 */
+	MC34704_REG8SET1_REG,		/* 0x15 */
+	MC34704_REG8SET2_REG,		/* 0x16 */
+	MC34704_REG8SET3_REG,		/* 0x17 */
+	MC34704_FAULTS_REG,		/* 0x18 */
+	MC34704_I2CSET1,		/* 0x19 */
+	MC34704_NUM_OF_REGS,
+};
+
+/* GENERAL2 register fields */
+#define ONOFFE		(1 << 0)
+#define ONOFFD		(1 << 1)
+#define ALLOFF		(1 << 4)
+
+#endif /* __MC34704_H__ */
Signature · 1 line
1.7.9.5
author
#9 lore raw

PATCH v2 5/5 mx25pdk: Add Ethernet support

In reply to Fabio Estevam

From: Fabio Estevam <[email protected]>

mx25pdk has a Ethernet port that is connected to its internal FEC controller.

In order to power up the Ethernet PHY (DP83640) it is necessary to communicate with the MC34704 PMIC via I2C.

Make the FEC ethernet port functional.

Signed-off-by Fabio Estevam <[email protected]>

---
Changes since v1:
- Use pmic api

 board/freescale/mx25pdk/mx25pdk.c |   61 +++++++++++++++++++++++++++++++++++++
 include/configs/mx25pdk.h         |   22 +++++++++++++
 2 files changed, 83 insertions(+)
board/freescale/mx25pdk/mx25pdk.c +61 -0
index 5f7c982..c63b96f 100644
@@ -26,7 +26,13 @@
 #include <asm/arch/clock.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
+#include <i2c.h>
+#include <pmic.h>
+#include <fsl_pmic.h>
+#include <mc34704.h>
 
+#define FEC_RESET_B		IMX_GPIO_NR(2, 3)
+#define FEC_ENABLE_B		IMX_GPIO_NR(4, 8)
 #define CARD_DETECT		IMX_GPIO_NR(2, 1)
 
 DECLARE_GLOBAL_DATA_PTR;

@@ -37,6 +43,47 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
 };
 #endif
 
+static void mx25pdk_fec_init(void)
+{
+	struct iomuxc_mux_ctl *muxctl;
+	struct iomuxc_pad_ctl *padctl;
+	u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
+	u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
+
+	/* FEC pin init is generic */
+	mx25_fec_init_pins();
+
+	muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
+	padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
+	/*
+	 * Set up FEC_RESET_B and FEC_ENABLE_B
+	 *
+	 * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12
+	 * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17
+	 */
+	writel(gpio_mux_mode, &muxctl->pad_d12);
+	writel(gpio_mux_mode, &muxctl->pad_a17);
+
+	writel(0x0, &padctl->pad_d12);
+	writel(0x0, &padctl->pad_a17);
+
+	/* Assert RESET and ENABLE low */
+	gpio_direction_output(FEC_RESET_B, 0);
+	gpio_direction_output(FEC_ENABLE_B, 0);
+
+	udelay(10);
+
+	/* Deassert RESET and ENABLE */
+	gpio_set_value(FEC_RESET_B, 1);
+	gpio_set_value(FEC_ENABLE_B, 1);
+
+	/* Setup I2C pins so that PMIC can turn on PHY supply */
+	writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk);
+	writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat);
+	writel(0x1E8, &padctl->pad_i2c1_clk);
+	writel(0x1E8, &padctl->pad_i2c1_dat);
+}
+
 int dram_init(void)
 {
 	/* dram_init must store complete ramsize in gd->ram_size */

@@ -60,6 +107,20 @@ int board_init(void)
 	return 0;
 }
 
+int board_late_init(void)
+{
+	struct pmic *p;
+
+	mx25pdk_fec_init();
+
+	pmic_init();
+	p = get_pmic();
+	/* Turn on Ethernet PHY supply */
+	pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
+
+	return 0;
+}
+
 #ifdef CONFIG_FSL_ESDHC
 int board_mmc_getcd(struct mmc *mmc)
 {
include/configs/mx25pdk.h +22 -0
index 1770521..8d0ea7f 100644
@@ -41,6 +41,7 @@
 #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - \

@@ -98,8 +99,29 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 
+/* PMIC Configs */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_FSL
+#define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
+#define CONFIG_SYS_FSL_PMIC_I2C_LENGTH	1
+
 #define CONFIG_DOS_PARTITION
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MXC
+#define CONFIG_SYS_I2C_BASE		IMX_I2C_BASE
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* Ethernet Configs */
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
 #define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
Signature · 1 line
1.7.9.5