Skip to contentSkip to conversation

emu10k1: add chip details for E-mu 1010 PCIe card

PATCH Applied Maxim Kachur 2 participants 3 messages Oct 17, 2012 Sound

lore
Share & tools
lore

Maxim Kachur

author
#0 lore raw

PATCH 1/1 emu10k1: add chip details for E-mu 1010 PCIe card

emu10k1_main.c: Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by Maxim Kachur <[email protected]>
---
 sound/pci/emu10k1/emu10k1_main.c |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)
sound/pci/emu10k1/emu10k1_main.c +9 -0
index bed4485..c21adb6 100644
@@ -1416,6 +1416,15 @@ static struct snd_emu_chip_details emu_chip_details[] = {
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
+	/* Tested by Maxim Kachur <[email protected]> 17th Oct 2012. */
+	/* This is MAEM8986, 0202 is MAEM8980 */
+	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
+	 .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]",
+	 .id = "EMU1010",
+	 .emu10k2_chip = 1,
+	 .ca0108_chip = 1,
+	 .spk71 = 1,
+	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
 	/* Tested by [email protected] 8th July 2005. */
 	/* This is MAEM8810, 0202 is MAEM8820 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
Signature · 1 line
1.7.8.6
Applied
#1 lore raw

At Wed, 17 Oct 2012 18:52:05 +0400,

Quoted 5 lines · Maxim Kachur

emu10k1_main.c: Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by Maxim Kachur <[email protected]>

Thanks, applied.

Takashi

Quoted 34 lines
---
  sound/pci/emu10k1/emu10k1_main.c |    9 +++++++++
  1 files changed, 9 insertions(+), 0 deletions(-)
sound/pci/emu10k1/emu10k1_main.c +9 -0
index bed4485..c21adb6 100644
@@ -1416,6 +1416,15 @@ static struct snd_emu_chip_details 
 emu_chip_details[] = {
  	 .ca0108_chip = 1,
  	 .spk71 = 1,
  	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
+	/* Tested by Maxim Kachur <[email protected]> 17th Oct 2012. */
+	/* This is MAEM8986, 0202 is MAEM8980 */
+	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
+	 .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]",
+	 .id = "EMU1010",
+	 .emu10k2_chip = 1,
+	 .ca0108_chip = 1,
+	 .spk71 = 1,
+	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
  	/* Tested by [email protected] 8th July 2005. */
  	/* This is MAEM8810, 0202 is MAEM8820 */

{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,

Signature · 6 lines
1.7.8.6

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
author
#2 lore raw
Quoted 11 lines · Takashi Iwai

At Wed, 17 Oct 2012 18:52:05 +0400,

Quoted 4 lines · Maxim Kachur

emu10k1_main.c: Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by Maxim Kachur<[email protected]>

Thanks, applied.

Takashi

Thank you! I hope it will reduce headache for some users not so familiar with kernel patching when using this type of cards.