Skip to contentSkip to conversation

wifi: rtlwifi: rtl8192de: Fix byte order of chip version

PATCH In review Bitterblue Smith 2 participants 7 messages Jan 12, 2024 – Jan 17, 2024 Realtek wireless driver (rtlwifi family)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 wifi: rtlwifi: rtl8192de: Fix byte order of chip version

The chip version stored in the efuse is currently assumed to be in big endian order:

#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE

But other 2-byte things in the efuse are stored in little endian order. For example, the EEPROM ID, the vendor ID, the product ID.

The out-of-kernel driver for the USB version of the chip uses the same macros and version detection code as this driver. They recognise 0xaa55, 0x9966, and 0xcc33 as correct versions. With the original macros, my device's version is the unrecognised value of 0x33cc. This seems like a mistake.

Swap the addresses to fix the chip version detection.

Compile tested only.

---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/reg.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/wireless/realtek/rtlwifi/rtl8192de/reg.h +2 -2
index 2783d7e7b227..bf15c636b092 100644
@@ -657,8 +657,8 @@
 #define EEPROM_RF_OPT7				0xCC
 
 #define EEPROM_DEF_PART_NO			0x3FD    /* Byte */
-#define EEPROME_CHIP_VERSION_L			0x3FF
-#define EEPROME_CHIP_VERSION_H			0x3FE
+#define EEPROME_CHIP_VERSION_L			0x3FE
+#define EEPROME_CHIP_VERSION_H			0x3FF
 
 /*
  * Current IOREG MAP
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 15 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Saturday, January 13, 2024 6:50 AM
To: [email protected]
Cc: Ping-Ke Shih <[email protected]>; Larry Finger <[email protected]>
Subject: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

The chip version stored in the efuse is currently assumed to be in big endian order:

#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE

Quoted 8 lines

But other 2-byte things in the efuse are stored in little endian order. For example, the EEPROM ID, the vendor ID, the product ID.

The out-of-kernel driver for the USB version of the chip uses the same macros and version detection code as this driver. They recognise 0xaa55, 0x9966, and 0xcc33 as correct versions. With the original macros, my device's version is the unrecognised value of 0x33cc. This seems like a mistake.

I will check this internally. Please wait a while.

maintainer
#2 lore raw
In reply to Bitterblue Smith
Quoted 12 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Saturday, January 13, 2024 6:50 AM
To: [email protected]
Cc: Ping-Ke Shih <[email protected]>; Larry Finger <[email protected]>
Subject: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

The chip version stored in the efuse is currently assumed to be in big endian order:

Quoted 8 lines

#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE

But other 2-byte things in the efuse are stored in little endian order. For example, the EEPROM ID, the vendor ID, the product ID.

The out-of-kernel driver for the USB version of the chip uses the same macros and version detection code as this driver.

I run vendor driver with 8192DU, and got correct 0xcc33.

efuse[EEPROME_CHIP_VERSION_H] = efuse[0x3fe] = cutvalue[1] = 0xcc efuse[EEPROME_CHIP_VERSION_L] = efuse[0x3ff] = cutvalue[0] = 0x33

So,

chhipvalue = (cutvalue[1] << 8) | cutvalue[0] = (0xcc << 8) | 0x33 = 0xcc33;

Quoted 4 lines

They recognise
0xaa55, 0x9966, and 0xcc33 as correct versions. With the original macros, my device's version is the unrecognised value of 0x33cc. This seems like a mistake.

Can you check the efuse value you read out?

#3 lore raw
Quoted 28 lines · Ping-Ke Shih
Quoted 12 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Saturday, January 13, 2024 6:50 AM
To: [email protected]
Cc: Ping-Ke Shih <[email protected]>; Larry Finger <[email protected]>
Subject: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

The chip version stored in the efuse is currently assumed to be in big endian order:

Quoted 8 lines

#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE

But other 2-byte things in the efuse are stored in little endian order. For example, the EEPROM ID, the vendor ID, the product ID.

The out-of-kernel driver for the USB version of the chip uses the same macros and version detection code as this driver.

I run vendor driver with 8192DU, and got correct 0xcc33.

efuse[EEPROME_CHIP_VERSION_H] = efuse[0x3fe] = cutvalue[1] = 0xcc efuse[EEPROME_CHIP_VERSION_L] = efuse[0x3ff] = cutvalue[0] = 0x33

So,

Quoted 10 lines

chhipvalue = (cutvalue[1] << 8) | cutvalue[0] = (0xcc << 8) | 0x33 = 0xcc33;

Quoted 4 lines

They recognise
0xaa55, 0x9966, and 0xcc33 as correct versions. With the original macros, my device's version is the unrecognised value of 0x33cc. This seems like a mistake.

Can you check the efuse value you read out?

I checked again like this:

hal/rtl8192d_hal_init.c +2 -0
index 156541b..175c856 100644
@@ -1565,6 +1565,8 @@ hal_EfuseUpdateNormalChipVersion_92D(
 	ReadEFuseByte(Adapter,EEPROME_CHIP_VERSION_L,&CutValue[0], _FALSE);
 
 	ChipValue= (CutValue[1]<<8)|CutValue[0];
+
+	pr_err("%s: EEPROME_CHIP_VERSION_H: %#x EEPROME_CHIP_VERSION_L: %#x CutValue[1]: %#x CutValue[0]: %#x ChipValue: %#x\n", __func__, EEPROME_CHIP_VERSION_H, EEPROME_CHIP_VERSION_L, CutValue[1], CutValue[0], ChipValue);
 	switch(ChipValue){
 		case 0xAA55:
 			//ChipVer |= CHIP_92D_C_CUT;

This is the output:

Jan 15 14:35:21 ideapad2 kernel: hal_EfuseUpdateNormalChipVersion_92D: EEPROME_CHIP_VERSION_H: 0x3fe EEPROME_CHIP_VERSION_L: 0x3ff CutValue[1]: 0x33 CutValue[0]: 0xcc ChipValue: 0x33cc

I'm using branch v4.0.10:
https://github.com/lwfinger/rtl8192du/tree/v4.0.10
because the master branch doesn't work. I don't think it matters because this code is the same in both branches.

Maybe my device really is a different version.

maintainer
#4 lore raw
Quoted 26 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Monday, January 15, 2024 8:51 PM
To: Ping-Ke Shih <[email protected]>; [email protected]
Cc: Larry Finger <[email protected]>
Subject: Re: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

hal/rtl8192d_hal_init.c +2 -0
index 156541b..175c856 100644
@@ -1565,6 +1565,8 @@ hal_EfuseUpdateNormalChipVersion_92D(
        ReadEFuseByte(Adapter,EEPROME_CHIP_VERSION_L,&CutValue[0], _FALSE);
 
        ChipValue= (CutValue[1]<<8)|CutValue[0];
+
+       pr_err("%s: EEPROME_CHIP_VERSION_H: %#x EEPROME_CHIP_VERSION_L: %#x CutValue[1]: %#x CutValue[0]:
 %#x ChipValue: %#x\n", __func__, EEPROME_CHIP_VERSION_H, EEPROME_CHIP_VERSION_L, CutValue[1], CutValue[0],
 ChipValue);
        switch(ChipValue){
                case 0xAA55:
                        //ChipVer |= CHIP_92D_C_CUT;
Quoted 4 lines

This is the output:

Jan 15 14:35:21 ideapad2 kernel: hal_EfuseUpdateNormalChipVersion_92D: EEPROME_CHIP_VERSION_H: 0x3fe

EEPROME_CHIP_VERSION_L: 0x3ff CutValue[1]: 0x33 CutValue[0]: 0xcc ChipValue: 0x33cc

With the same branch and the same changes you mentioned, output is:

hal_EfuseUpdateNormalChipVersion_92D: EEPROME_CHIP_VERSION_H: 0x3fe EEPROME_CHIP_VERSION_L: 0x3ff CutValue[1]: 0xcc CutValue[0]: 0x33 ChipValue: 0xcc33

Quoted 2 lines

Maybe my device really is a different version.

Not sure what happens. I feel no one can remember the definition of these values. Maybe, we can just add an new value 0x33CC, and test if it works normal.

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c +1 -0
index 743ac6871bf4..c336d4b362f5 100644
@@ -1684,6 +1684,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
                rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n");
                break;
        case 0xCC33:
+       case 0x33CC:
                chipver |= CHIP_92D_E_CUT;
                rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n");
                break;

How did you find this weird value? Vendor driver doesn't work for you?

Ping-Ke

#5 lore raw
Quoted 54 lines · Ping-Ke Shih
Quoted 26 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Monday, January 15, 2024 8:51 PM
To: Ping-Ke Shih <[email protected]>; [email protected]
Cc: Larry Finger <[email protected]>
Subject: Re: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

hal/rtl8192d_hal_init.c +2 -0
index 156541b..175c856 100644
@@ -1565,6 +1565,8 @@ hal_EfuseUpdateNormalChipVersion_92D(
        ReadEFuseByte(Adapter,EEPROME_CHIP_VERSION_L,&CutValue[0], _FALSE);
 
        ChipValue= (CutValue[1]<<8)|CutValue[0];
+
+       pr_err("%s: EEPROME_CHIP_VERSION_H: %#x EEPROME_CHIP_VERSION_L: %#x CutValue[1]: %#x CutValue[0]:
 %#x ChipValue: %#x\n", __func__, EEPROME_CHIP_VERSION_H, EEPROME_CHIP_VERSION_L, CutValue[1], CutValue[0],
 ChipValue);
        switch(ChipValue){
                case 0xAA55:
                        //ChipVer |= CHIP_92D_C_CUT;
Quoted 4 lines

This is the output:

Jan 15 14:35:21 ideapad2 kernel: hal_EfuseUpdateNormalChipVersion_92D: EEPROME_CHIP_VERSION_H: 0x3fe

EEPROME_CHIP_VERSION_L: 0x3ff CutValue[1]: 0x33 CutValue[0]: 0xcc ChipValue: 0x33cc

With the same branch and the same changes you mentioned, output is:

hal_EfuseUpdateNormalChipVersion_92D: EEPROME_CHIP_VERSION_H: 0x3fe EEPROME_CHIP_VERSION_L: 0x3ff CutValue[1]: 0xcc CutValue[0]: 0x33 ChipValue: 0xcc33

Quoted 2 lines

Maybe my device really is a different version.

Not sure what happens. I feel no one can remember the definition of these values. Maybe, we can just add an new value 0x33CC, and test if it works normal.

drivers/net/wireless/realtek/rtlwifi/rtl8192de/hw.c +1 -0
index 743ac6871bf4..c336d4b362f5 100644
@@ -1684,6 +1684,7 @@ static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw)
                rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "D-CUT!!!\n");
                break;
        case 0xCC33:
+       case 0x33CC:
                chipver |= CHIP_92D_E_CUT;
                rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "E-CUT!!!\n");
                break;
Quoted 2 lines

How did you find this weird value? Vendor driver doesn't work for you?

It works fine. I just saw the message "Unkown CUT!" and got curious:
https://github.com/lwfinger/rtl8192du/issues/92#issuecomment-1155420291

If the addresses in the efuse are correct, then my device doesn't need any patch. Unknown cut is treated the same as D cut, which is treated the same as E cut.

Quoted 2 lines

Ping-Ke

maintainer
#6 lore raw
Quoted 9 lines

-----Original Message-----
From: Bitterblue Smith <[email protected]>
Sent: Tuesday, January 16, 2024 11:38 PM
To: Ping-Ke Shih <[email protected]>; [email protected]
Cc: Larry Finger <[email protected]>
Subject: Re: [PATCH] wifi: rtlwifi: rtl8192de: Fix byte order of chip version

Quoted 7 lines

It works fine. I just saw the message "Unkown CUT!" and got curious:
https://github.com/lwfinger/rtl8192du/issues/92#issuecomment-1155420291

If the addresses in the efuse are correct, then my device doesn't need any patch. Unknown cut is treated the same as D cut, which is treated the same as E cut.

Let's keep it as it was.