USB: make usb_kbd obey USB DMA alignment requirements
PATCH v4 1/3 USB: make usb_kbd obey USB DMA alignment requirements
Change usb_kbd driver to obey alignment requirements for USB DMA on the buffer used for data transfer. This is necessary for architectures that enable dcache and enable USB DMA.
---
v4: dynamically allocate xfer buffer, add alignment and roundup to buffer
instead of entire pdata struct
v3: add comment about alignemnt requirement
v2: use memalign instead of __align()
--- common/usb_kbd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
common/usb_kbd.c +4 -1
@@ -112,7 +112,7 @@ struct usb_kbd_pdata {uint32_t usb_out_pointer;uint8_t usb_kbd_buffer[USB_KBD_BUFFER_LEN ]; -uint8_t new[8 ]; +uint8_t *new;uint8_t old[8 ];uint8_t flags;
@@ -435,6 +435,9 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum)/* Clear private data */ memset (data,0 ,sizeof (struct usb_kbd_pdata )); +/* allocate input buffer aligned and sized to USB DMA alignment */ + data->new =memalign (USB_DMA_MINALIGN ,roundup (8 ,USB_DMA_MINALIGN )); +/* Insert private data into USB device structure */ dev->privptr = data;
Signature · 1 line
1.7.10.4
PATCH v4 2/3 tegra: move TEGRA_DEVICE_SETTINGS to tegra-common-post.h
Move environment settings for stdin/stdout/stderr to tegra-common-post.h and generate them automaticaly based on input device selection.
---
v4: no changes
v3: no changes
v2: new patch
--- include/configs/seaboard.h | 5 ----- include/configs/tegra-common-post.h | 19 +++++++++++++++++++ include/configs/tegra20-common.h | 4 ---- 3 files changed, 19 insertions(+), 9 deletions(-)
include/configs/seaboard.h +0 -5
@@ -98,11 +98,6 @@#define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD -#undef TEGRA_DEVICE_SETTINGS -#define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ - "stdout=serial\0" \ - "stderr=serial\0" -#include "tegra-common-post.h" /* NAND support */
include/configs/tegra-common-post.h +19 -0
@@ -140,6 +140,25 @@#endif +#ifdef CONFIG_TEGRA_KEYBOARD +#define STDIN_KBD_KBC ",tegra-kbc" +#else +#define STDIN_KBD_KBC "" +#endif + +#ifdef CONFIG_USB_KEYBOARD +#define STDIN_KBD_USB ",usbkbd" +#define CONFIG_SYS_USB_EVENT_POLL +#define CONFIG_PREBOOT "usb start" +#else +#define STDIN_KBD_USB "" +#endif + +#define TEGRA_DEVICE_SETTINGS \ + "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ +#define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \
include/configs/tegra20-common.h +0 -4
@@ -124,12 +124,8 @@#define CONFIG_SYS_NO_FLASH -/* Environment information, boards can override if required */ #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define TEGRA_DEVICE_SETTINGS "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0"#define CONFIG_LOADADDR 0x408000/* def. location for kernel */ #define CONFIG_BOOTDELAY 2/* -1 to disable auto boot */
Signature · 1 line
1.7.10.4
PATCH v4 3/3 tegra: Enable USB keyboard
In reply to Allen MartinEnable USB keyboard for seaboard and ventana
---
v4: no changes
v3: no changes
v2: added ventana
--- include/configs/seaboard.h | 3 +++ include/configs/ventana.h | 3 +++ 2 files changed, 6 insertions(+)
include/configs/seaboard.h +3 -0
@@ -98,6 +98,9 @@#define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD +/* USB keyboard */ +#define CONFIG_USB_KEYBOARD +#include "tegra-common-post.h" /* NAND support */
include/configs/ventana.h +3 -0
@@ -75,6 +75,9 @@#define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* USB keyboard */ +#define CONFIG_USB_KEYBOARD +#include "tegra-common-post.h" #endif /* __CONFIG_H */
Signature · 1 line
1.7.10.4
PATCH v4 1/3 USB: make usb_kbd obey USB DMA alignment requirements
In reply to Allen MartinQuoted 3 lines · Allen Martin
Change
usb_kbddriver to obey alignment requirements for USB DMA on the buffer used for data transfer. This is necessary for architectures that enable dcache and enable USB DMA.