mx53loco: Allow booting a zImage kernel
PATCH 1/5 mx53loco: Allow booting a zImage kernel
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
--- include/configs/mx53loco.h | 1 + 1 file changed, 1 insertion(+)
include/configs/mx53loco.h +1 -0
@@ -103,6 +103,7 @@/* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS
Signature · 1 line
1.7.9.5
PATCH 2/5 mx25pdk: Allow booting a zImage kernel
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
--- include/configs/mx25pdk.h | 1 + 1 file changed, 1 insertion(+)
include/configs/mx25pdk.h +1 -0
@@ -83,6 +83,7 @@/* U-Boot commands */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE /* Ethernet */
Signature · 1 line
1.7.9.5
PATCH 2/5 mx25pdk: Allow booting a zImage kernel
Quoted 15 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>--- include/configs/mx25pdk.h | 1 + 1 file changed, 1 insertion(+)include/configs/mx25pdk.h +0
-0
include/configs/mx25pdk.h line 89
Quoted 7 lines
include/configs/mx25pdk.h +1
-0@@ -83,6 +83,7 @@/* U-Boot commands */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE /* Ethernet */
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 3/5 mx51evk: Allow booting a zImage kernel
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
--- include/configs/mx51evk.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/mx51evk.h +1 -1
@@ -144,7 +144,7 @@***********************************************************/ #include <config_cmd_default.h> - +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS#define CONFIG_CMD_DATE
Signature · 1 line
1.7.9.5
PATCH 3/5 mx51evk: Allow booting a zImage kernel
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 4/5 mx35pdk: Allow booting a zImage kernel
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
--- include/configs/mx35pdk.h | 1 + 1 file changed, 1 insertion(+)
include/configs/mx35pdk.h +1 -0
@@ -94,6 +94,7 @@#include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK
Signature · 1 line
1.7.9.5
PATCH 4/5 mx35pdk: Allow booting a zImage kernel
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 5/5 mx6qsabre_common: Allow booting a zImage kernel
In reply to Fabio EstevamFrom: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
--- include/configs/mx6qsabre_common.h | 1 + 1 file changed, 1 insertion(+)
include/configs/mx6qsabre_common.h +1 -0
@@ -72,6 +72,7 @@/* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS#define CONFIG_BOOTDELAY 3
Signature · 1 line
1.7.9.5
PATCH 5/5 mx6qsabre_common: Allow booting a zImage kernel
Quoted 6 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/5 mx53loco: Allow booting a zImage kernel
In reply to Fabio EstevamQuoted 14 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>--- include/configs/mx53loco.h | 1 + 1 file changed, 1 insertion(+)include/configs/mx53loco.h +0
-0
include/configs/mx53loco.h line 106
Quoted 4 lines
include/configs/mx53loco.h +1
-0@@ -103,6 +103,7 @@/* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ
Fabio,
Any thoughts on also enabling "define CONFIG_SUPPORT_RAW_INITRD" at the same time, otherwise you'd still have to run mkimage on the other half "initrd.img-$(uname -r)" when using booting an initramfs with your main kernel image..
Regards,
Signature · 2 lines
Robert Nelson http://www.rcn-ee.com/
PATCH 1/5 mx53loco: Allow booting a zImage kernel
Hi Robert,
Quoted 6 lines · Robert Nelson
Fabio,
Any thoughts on also enabling "define
CONFIG_SUPPORT_RAW_INITRD" at the same time, otherwise you'd still have to run mkimage on the other half "initrd.img-$(uname -r)" when using booting an initramfs with your main kernel image..
Sure, no problem. We can enable CONFIG_SUPPORT_RAW_INITRD as well.
Stefano,
Should I enable CONFIG_SUPPORT_RAW_INITRD as part of the same patch series or on a separate one?
Thanks,
Fabio Estevam
PATCH 1/5 mx53loco: Allow booting a zImage kernel
Am 25/10/2012 04:15, schrieb Fabio Estevam:
Quoted 11 lines
Hi Robert,
Quoted 6 lines · Robert Nelson
Fabio,
Any thoughts on also enabling "define
CONFIG_SUPPORT_RAW_INITRD" at the same time, otherwise you'd still have to run mkimage on the other half "initrd.img-$(uname -r)" when using booting an initramfs with your main kernel image..
Quoted 6 lines
Sure, no problem. We can enable
CONFIG_SUPPORT_RAW_INITRDas well.Stefano,
Should I enable
CONFIG_SUPPORT_RAW_INITRDas part of the same patch series or on a separate one?
Your decision, both are fine with me.
Regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/5 mx53loco: Allow booting a zImage kernel
Quoted 4 lines · Stefano Babic
Quoted 2 lines
Should I enable
CONFIG_SUPPORT_RAW_INITRDas part of the same patch series or on a separate one?Your decision, both are fine with me.
Ok, then I prefer to keep this series as is.
I will send a separate one for adding CONFIG_SUPPORT_RAW_INITRD only for mx53loco as requested by Robert.
Regards,
Fabio Estevam
PATCH 1/5 mx53loco: Allow booting a zImage kernel
Am 25/10/2012 13:16, schrieb Fabio Estevam:
Quoted 11 lines · Stefano Babic
Quoted 5 lines
Quoted 3 lines
Should I enable
CONFIG_SUPPORT_RAW_INITRDas part of the same patch series or on a separate one?Your decision, both are fine with me.
Ok, then I prefer to keep this series as is.
I will send a separate one for adding
CONFIG_SUPPORT_RAW_INITRDonly for mx53loco as requested by Robert.
Ok, fine. This series is then ready to be merged.
Regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH 1/5 mx53loco: Allow booting a zImage kernel
In reply to Fabio EstevamQuoted 15 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Allow booting a zImage kernel.
Signed-off-by Fabio Estevam <[email protected]>--- include/configs/mx53loco.h | 1 + 1 file changed, 1 insertion(+)include/configs/mx53loco.h +0
-0
include/configs/mx53loco.h line 109
Quoted 7 lines
include/configs/mx53loco.h +1
-0@@ -103,6 +103,7 @@/* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================