Add QEMU for runing on the target

index 8d8fdb4..80e2922 100644
@@ -29,14 +29,20 @@ define LIBCURL_TARGET_CLEANUP
 	rm -rf $(TARGET_DIR)/usr/bin/curl-config \
 	       $(if $(BR2_PACKAGE_CURL),,$(TARGET_DIR)/usr/bin/curl)
 endef
-
+define LIBCURL_FIX_TARGET_PC
+	printf 'Requires: openssl\n' >>$(TARGET_DIR)/usr/lib/pkgconfig/libcurl.pc
+endef
 LIBCURL_POST_INSTALL_TARGET_HOOKS += LIBCURL_TARGET_CLEANUP
+LIBCURL_POST_INSTALL_TARGET_HOOKS += $(if $(BR2_PACKAGE_OPENSSL),LIBCURL_FIX_TARGET_PC)
 
 define LIBCURL_STAGING_FIXUP_CURL_CONFIG
 	$(SED) "s,prefix=/usr,prefix=$(STAGING_DIR)/usr," $(STAGING_DIR)/usr/bin/curl-config
 endef
-
+define LIBCURL_FIX_STAGING_PC
+	printf 'Requires: openssl\n' >>$(STAGING_DIR)/usr/lib/pkgconfig/libcurl.pc
+endef
 LIBCURL_POST_INSTALL_STAGING_HOOKS += LIBCURL_STAGING_FIXUP_CURL_CONFIG
+LIBCURL_POST_INSTALL_STAGING_HOOKS += $(if $(BR2_PACKAGE_OPENSSL),LIBCURL_FIX_STAGING_PC)
 
 $(eval $(autotools-package))
 

index 1650c71..c9cb3ed 100644
@@ -396,6 +396,7 @@ source "package/libaio/Config.in"
 source "package/libraw1394/Config.in"
 source "package/tslib/Config.in"
 source "package/libfreefare/Config.in"
+source "package/dtc/Config.in"
 source "package/libftdi/Config.in"
 source "package/libhid/Config.in"
 source "package/libiqrf/Config.in"

new file mode 100644
index 0000000..7b86c60
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_DTC
+	bool "dtc"
+	help
+	  dtc is the Device Tree Compiler, to generate Device Trees.
+	  libfdt if a library to manipulate Flat Device Trees.
+	  
+	  Note that only the library is installed for now.
+	  
+	  http://git.jdl.com/gitweb/?p=dtc.git  (no home page)

new file mode 100644
index 0000000..03225e7
@@ -0,0 +1,12 @@
+diff -durN dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile
+--- dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile	2012-10-22 22:02:47.541240846 +0200
++++ dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile	2012-10-22 22:03:21.151047833 +0200
+@@ -18,7 +18,7 @@
+ CPPFLAGS = -I libfdt -I .
+ WARNINGS = -Werror -Wall -Wpointer-arith -Wcast-qual -Wnested-externs \
+ 	-Wstrict-prototypes -Wmissing-prototypes -Wredundant-decls
+-CFLAGS = -g -Os -fPIC -Werror $(WARNINGS)
++CFLAGS = -g -Os -fPIC -Werror $(WARNINGS) $(EXTRA_CFLAGS)
+ 
+ BISON = bison
+ LEX = flex

new file mode 100644
index 0000000..c86d587
@@ -0,0 +1,28 @@
+Makefile: add a rule to only install libfdt
+
+Signed-off-by: "Yann E. MORIN" <[email protected]>
+
+---
+Patch not sent upstream.
+
+It's really specific to buildroot, and is probably not
+good (aka generic) enough to be pushed upstream.
+
+diff --git a/Makefile b/Makefile
+index 1169e6c..39e7190 100644
+--- a/Makefile
++++ b/Makefile
+@@ -160,10 +160,12 @@ endif
+ # intermediate target and building them again "for real"
+ .SECONDARY: $(DTC_GEN_SRCS) $(CONVERT_GEN_SRCS)
+ 
+-install: all $(SCRIPTS)
++install: all $(SCRIPTS) libfdt_install
+ 	@$(VECHO) INSTALL
+ 	$(INSTALL) -d $(DESTDIR)$(BINDIR)
+ 	$(INSTALL) $(BIN) $(SCRIPTS) $(DESTDIR)$(BINDIR)
++
++libfdt_install: libfdt
+ 	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
+ 	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
+ 	ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)

new file mode 100644
index 0000000..d53e78a
@@ -0,0 +1,36 @@
+#############################################################
+#
+# libcurl
+#
+#############################################################
+
+DTC_VERSION         = e4b497f367a3b2ae99cc52089a14a221b13a76ef
+DTC_SITE            = git://git.jdl.com/software/dtc.git
+DTC_LICENSE         = GPLv2+/BSD-2c
+DTC_LICENSE_FILES   = README.license GPL
+# Note: the dual-license only applies to the library.
+#       The DT compiler (dtc) is GPLv2+, but we do not install it.
+DTC_INSTALL_STAGING = YES
+
+# Need -fPIC for x86-64
+define DTC_BUILD_CMDS
+	$(TARGET_CONFIGURE_OPTS) $(MAKE1) -C $(@D)                          \
+	                                  EXTRA_CFLAGS="$(TARGET_CFLAGS)"   \
+	                                  PREFIX=/usr                       \
+	                                  libfdt
+endef
+
+#?libfdt_install is our own install rule added by our patch
+define DTC_INSTALL_STAGING_CMDS
+	$(MAKE1) -C $(@D) DESTDIR=$(STAGING_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_INSTALL_TARGET_CMDS
+	$(MAKE1) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_CLEAN_CMDS
+	$(MAKE) -C $(@D) libfdt_clean
+endef
+
+$(eval $(generic-package))

index c9cb3ed..c64a54a 100644
@@ -640,6 +640,7 @@ source "package/transmission/Config.in"
 source "package/ttcp/Config.in"
 source "package/udpcast/Config.in"
 source "package/ushare/Config.in"
+source "package/vde2/Config.in"
 source "package/vpnc/Config.in"
 source "package/vsftpd/Config.in"
 source "package/vtun/Config.in"

new file mode 100644
index 0000000..1591bc4
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_VDE2
+	bool "vde2"
+	help
+	  VDE is an ethernet compliant virtual network that can be
+	  spawned over a set of physical computer over the Internet.
+	  VDE is part of virtualsquare project.
+	  
+	  http://vde.sourceforge.net/
+	  
+	  Note: only the libraries are installed.

new file mode 100644
index 0000000..b2e0fea
@@ -0,0 +1,36 @@
+#############################################################
+#
+# vde2
+#
+#############################################################
+
+VDE2_VERSION         = 2.3.2
+VDE2_SOURCE          = vde2-$(VDE2_VERSION).tar.bz2
+VDE2_SITE            = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/project/vde/vde2/$(VDE2_VERSION)
+VDE2_LICENSE         = GPLv2+ LGPLv2.1+ BSD-3c
+VDE2_LICENSE_FILES   = COPYING COPYING.libvdeplug COPYING.slirpvde
+VDE2_INSTALL_STAGING = YES
+
+# Reasons for enabling/disabling stuff:
+#?- tuntap is enabled in the hope we're using a recent-enough toolchain
+#   that does have if_tun.h (virtually everything these days)
+# - kvde_switch is disabled because it requires a patched kernel
+# - cryptcab is disabled to not depend on openSSL
+# - python is disabled to not depend on Python
+# - pcap is disabled to not depend on libpcap
+# - profiling is disabled because we do not want to debug/profile
+#
+# Note: disabled features can be added with corresponding dependencies
+#       in future commits.
+VDE2_CONF_OPT = --disable-experimental  \
+                --disable-cryptcab      \
+                --disable-pcap          \
+                --disable-python        \
+                --disable-profile       \
+                --disable-kernel-switch \
+                --enable-tuntap         \
+
+#?Package does not build in parallel due to improper make rules
+VDE2_MAKE = $(MAKE1)
+
+$(eval $(autotools-package))

index c64a54a..2c5ad8c 100644
@@ -440,6 +440,7 @@ source "package/libesmtp/Config.in"
 source "package/libeXosip2/Config.in"
 source "package/libfcgi/Config.in"
 source "package/libidn/Config.in"
+source "package/libiscsi/Config.in"
 source "package/liboauth/Config.in"
 source "package/libmicrohttpd/Config.in"
 source "package/neon/Config.in"

new file mode 100644
index 0000000..f3fc29e
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_LIBISCSI
+	bool "libiscsi"
+	select BR2_PACKAGE_POPT
+	help
+	  Libiscsi is a client-side library to implement the iSCSI protocol
+	  that can be used to access resource of an iSCSI Target.
+	  
+	  The library is fully async with regards to iscsi commands and scsi
+	  tasks, but a sync layer is also provided for ease of use for simpler
+	  applications.
+	  
+	  https://github.com/sahlberg/libiscsi  (no proper homepage)

new file mode 100644
index 0000000..319b5b6
@@ -0,0 +1,22 @@
+#############################################################
+#
+# libiscsi
+#
+#############################################################
+
+LIBISCSI_VERSION         = 1.6.0
+LIBISCSI_SOURCE          = libiscsi-$(LIBISCSI_VERSION).tar.gz
+LIBISCSI_SITE            = https://github.com/downloads/sahlberg/libiscsi
+LIBISCSI_LICENSE         = GPLv2+ LGPLv2.1+
+LIBISCSI_LICENSE_FILES   = COPYING LICENCE-GPL-2.txt LICENCE-LGPL-2.1.txt 
+LIBISCSI_INSTALL_STAGING = YES
+LIBISCSI_DEPENDENCIES    = popt
+
+LIBISCSI_AUTORECONF = YES
+# Having a m4/ directory is mandatory for autoreconf to work
+define LIBISCSI_CREATE_M4_DIR
+	mkdir -p $(@D)/m4
+endef
+LIBISCSI_PRE_CONFIGURE_HOOKS += LIBISCSI_CREATE_M4_DIR
+
+$(eval $(autotools-package))

index 2c5ad8c..55bb0b2 100644
@@ -461,6 +461,7 @@ source "package/libupnp/Config.in"
 source "package/libvncserver/Config.in"
 source "package/nss-mdns/Config.in"
 source "package/ortp/Config.in"
+source "package/usbredir/Config.in"
 source "package/zeromq/Config.in"
 endmenu
 

new file mode 100644
index 0000000..8d8ac5a
@@ -0,0 +1,28 @@
+comment "usbredir requires libusb"
+	depends on !BR2_PACKAGE_LIBUSB
+
+config BR2_PACKAGE_USBREDIR
+	bool "usbredir"
+	depends on BR2_PACKAGE_LIBUSB
+	help
+	  usbredir is the name of a network protocol for sending usb device
+	  traffic over a network connection. It is also the name of the
+	  software package offering a parsing library, a usbredirhost library
+	  and several utilities implementing this protocol.
+	  
+	  Note: only the library is installed, not the utilities. Say 'y'
+	  below if you want the server too.
+	  
+	  http://www.spice-space.org/page/UsbRedir
+
+if BR2_PACKAGE_USBREDIR
+
+config BR2_PACKAGE_USBREDIR_SERVER
+	bool "usbredirserver on target"
+	help
+	  If you want to serve usbredir requests on your target, say 'y'
+	  here to have the usbredir server on the target.
+	  
+	  Note: the server is not required to use the library.
+
+endif

new file mode 100644
index 0000000..43b47eb
@@ -0,0 +1,34 @@
+#############################################################
+#
+# usbredir
+#
+#############################################################
+
+USBREDIR_VERSION         = 0.4.3
+USBREDIR_SOURCE          = usbredir-$(USBREDIR_VERSION).tar.bz2
+USBREDIR_SITE            = http://spice-space.org/download/usbredir
+USBREDIR_LICENSE         = LGPLv2.1+
+USBREDIR_LICENSE_FILES   = COPYING.LIB
+USBREDIR_INSTALL_STAGING = YES
+USBREDIR_DEPENDENCIES    = libusb
+
+USBREDIR_DEPENDENCIES    += host-pkg-config
+
+ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y)
+
+USBREDIR_LICENSE         += GPLv2+
+USBREDIR_LICENSE_FILES   += COPYING
+
+else # BR2_PACKAGE_USBREDIR_SERVER != y
+
+# It's much easier to remove unwanted files after-the-fact, rather than trying
+# to install only what we want. Sad-and-dull life, but life nonetheless...
+# Note: do not forget to update the license, above, if you keep the server.
+define USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+	rm -f $(TARGET_DIR)/usr/sbin/usbredirserver
+endef
+USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+
+endif # BR2_PACKAGE_USBREDIR_SERVER
+
+$(eval $(autotools-package))

index 273d9bc..5e8d60c 100644
@@ -2,6 +2,7 @@ menu "Audio and video applications"
 source "package/multimedia/alsa-utils/Config.in"
 source "package/multimedia/aumix/Config.in"
 source "package/multimedia/bellagio/Config.in"
+source "package/multimedia/celt051/Config.in"
 source "package/multimedia/faad2/Config.in"
 source "package/multimedia/flac/Config.in"
 source "package/multimedia/ffmpeg/Config.in"

new file mode 100644
index 0000000..50ed069
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_CELT051
+	bool "celt051"
+	select BR2_PACKAGE_LIBOGG
+	help
+	  The CELT ultra-low delay audio codec
+	  
+	  The CELT codec is a compression algorithm for audio. Like MP3,
+	  Vorbis, and AAC it is suitable for transmitting music with high
+	  quality. Unlike these formats CELT imposes very little delay on
+	  the signal, even less than is typical for speech centric formats
+	  like Speex, GSM, or G.729.
+	  
+	  Note: this is version 0.5.1.3 of celt.
+	  
+	  http://www.celt-codec.org/

new file mode 100644
index 0000000..9baaa82
@@ -0,0 +1,30 @@
+#############################################################
+#
+# celt051
+#
+#############################################################
+
+# Although version newer than 0.5.1.3 exists, we're
+# stuck with 0.5.1.3 for use by Spice (coming later)
+CELT051_VERSION         = 0.5.1.3
+CELT051_SOURCE          = celt-$(CELT051_VERSION).tar.gz
+CELT051_SITE            = http://downloads.xiph.org/releases/celt
+CELT051_LICENSE         = BSD-2c
+CELT051_LICENSE_FILES   = COPYING
+CELT051_INSTALL_STAGING = YES
+CELT051_DEPENDENCIES    = libogg
+
+# Need to specify --with-ogg, otherwise /usr/lib may be searched for
+# if target is the same kind as host (ie. same arch, same bitness,
+# same endianness, so that /usr/lib contains libraries linkable by
+# our cross-compiler)
+CELT051_CONF_OPT =                  \
+  --enable-fixed-point              \
+  --disable-fixed-point-debug       \
+  --disable-experimental-postfilter \
+  --disable-static-modes            \
+  --disable-assertions              \
+  --disable-oggtest                 \
+  --with-ogg=$(STAGING_DIR)/usr     \
+
+$(eval $(autotools-package))

index 55bb0b2..62500ce 100644
@@ -291,6 +291,7 @@ source "package/python-netifaces/Config.in"
 source "package/python-nfc/Config.in"
 source "package/python-protobuf/Config.in"
 source "package/python-pygame/Config.in"
+source "package/python-pyparsing/Config.in"
 source "package/python-serial/Config.in"
 source "package/python-setuptools/Config.in"
 endmenu

new file mode 100644
index 0000000..126dd0e
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_PYTHON_PYPARSING
+	bool "pyparsing"
+	depends on BR2_PACKAGE_PYTHON
+	help
+	  The pyparsing module is an alternative approach to creating and
+	  executing simple grammars, vs. the traditional lex/yacc approach,
+	  or the use of regular expressions. The pyparsing module provides
+	  a library of classes that client code uses to construct the grammar
+	  directly in Python code.
+	  
+	  http://pyparsing.wikispaces.com/

new file mode 100644
index 0000000..621f636
@@ -0,0 +1,38 @@
+#############################################################
+#
+# python-pyparsing
+#
+#############################################################
+
+PYTHON_PYPARSING_VERSION         = 1.5.6
+PYTHON_PYPARSING_SOURCE          = pyparsing-$(PYTHON_PYPARSING_VERSION).tar.gz
+PYTHON_PYPARSING_SITE            = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/project/pyparsing/pyparsing/pyparsing-$(PYTHON_PYPARSING_VERSION)
+PYTHON_PYPARSING_LICENSE         = MIT
+PYTHON_PYPARSING_LICENSE_FILES   = LICENSE
+PYTHON_PYPARSING_INSTALL_STAGING = YES
+PYTHON_PYPARSING_DEPENDENCIES    = python
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_BUILD_CMDS
+	(cd $(@D);                                              \
+	 CC="$(TARGET_CC)"                                      \
+	 CFLAGS="$(TARGET_CFLAGS)"                              \
+	 LDSHARED="$(TARGET_CROSS)gcc -shared"                  \
+	 CROSS_COMPILING=yes                                    \
+	 _python_sysroot=$(STAGING_DIR)                         \
+	 _python_srcdir=$(BUILD_DIR)/python$(PYTHON_VERSION)    \
+	 _python_prefix=/usr                                    \
+	 _python_exec_prefix=/usr                               \
+	 $(HOST_DIR)/usr/bin/python setup.py build              \
+	)
+endef
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_INSTALL_TARGET_CMDS
+	(cd $(@D);                                              \
+	 $(HOST_DIR)/usr/bin/python setup.py install            \
+	                            --prefix=$(TARGET_DIR)/usr  \
+	)
+endef
+
+$(eval $(generic-package))

index 62500ce..330d8a3 100644
@@ -629,6 +629,7 @@ source "package/ser2net/Config.in"
 source "package/socat/Config.in"
 source "package/socketcand/Config.in"
 source "package/spawn-fcgi/Config.in"
+source "package/spice-protocol/Config.in"
 source "package/squid/Config.in"
 source "package/stunnel/Config.in"
 source "package/tcpdump/Config.in"

new file mode 100644
index 0000000..b354361
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SPICE_PROTOCOL
+	bool "spice protocol"
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the protocol-part of Spice.
+	  
+	  http://www.spice-space.org/

new file mode 100644
index 0000000..dcfe50d
@@ -0,0 +1,14 @@
+#############################################################
+#
+# Spice-protocol
+#
+#############################################################
+
+SPICE_PROTOCOL_VERSION         = 0.12.2
+SPICE_PROTOCOL_SOURCE          = spice-protocol-$(SPICE_PROTOCOL_VERSION).tar.bz2
+SPICE_PROTOCOL_SITE            = http://www.spice-space.org/download/releases/
+SPICE_PROTOCOL_LICENSE         = BSD-3c
+SPICE_PROTOCOL_LICENSE_FILES   = COPYING
+SPICE_PROTOCOL_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))

index 330d8a3..97d38af 100644
@@ -108,6 +108,7 @@ comment "Graphic applications"
 source "package/rrdtool/Config.in"
 
 comment "graphic libraries"
+source "package/cegui06/Config.in"
 source "package/directfb/Config.in"
 source "package/directfb-examples/Config.in"
 source "package/divine/Config.in"

new file mode 100644
index 0000000..7225f9c
@@ -0,0 +1,14 @@
+config BR2_PACKAGE_CEGUI06
+	bool "libcegui06"
+	select BR2_PACKAGE_FREETYPE
+	select BR2_PACKAGE_PCRE
+	select BR2_PACKAGE_EXPAT
+	help
+	  Crazy Eddie's GUI System is a free library providing windowing and
+	  widgets for graphics APIs / engines where such functionality is not
+	  natively available, or severely lacking. The library is object
+	  orientated, written in C++, and targeted at games developers who
+	  should be spending their time creating great games, not building
+	  GUI sub-systems!
+	  
+	  http://www.cegui.org.uk/

new file mode 100644
index 0000000..cc16eff
@@ -0,0 +1,26 @@
+includes: ptrdiff_t is defined in stddef.h
+
+ptrdiff_t is defined in the stddef.h header, so this
+header must be included.
+
+Do the #include in a common header to avoid doing it
+all over the place.
+
+Signed-off-by: "Yann E. MORIN" <[email protected]>
+
+---
+Patch not sent upstream, it's a no-longer-maintained branch.
+To be noted, however, is that the current devel branch is
+still missing that include.
+
+diff -durN cegui06-0.6.2.orig/include/CEGUIBase.h cegui06-0.6.2/include/CEGUIBase.h
+--- cegui06-0.6.2.orig//include/CEGUIBase.h	2008-02-11 15:38:27.000000000 +0100
++++ cegui06-0.6.2/include/CEGUIBase.h	2012-08-19 22:51:50.260385978 +0200
+@@ -34,6 +34,7 @@
+ #define _CEGUIBase_h_
+ 
+ #include <cassert>
++#include <stddef.h>
+ 
+ // bring in configuration options
+ #include "CEGUIConfig.h"

new file mode 100644
index 0000000..2f562ac
@@ -0,0 +1,34 @@
+#############################################################
+#
+# libcegui
+#
+#############################################################
+
+CEGUI06_VERSION         = 0.6.2
+CEGUI06_SOURCE          = CEGUI-$(CEGUI06_VERSION)b.tar.gz
+CEGUI06_SITE            = http://downloads.sourceforge.net/project/crayzedsgui/CEGUI%20Mk-2/$(CEGUI06_VERSION)
+CEGUI06_LICENSE         = MIT
+CEGUI06_LICENSE_FILES   = COPYING
+CEGUI06_INSTALL_STAGING = YES
+
+CEGUI06_DEPENDENCIES    =       \
+    freetype                    \
+    pcre                        \
+    expat                       \
+
+CEGUI06_CONF_OPT =              \
+    --enable-expat              \
+    --disable-external-tinyxml  \
+    --disable-xerces-c          \
+    --disable-libxml            \
+    --disable-tinyxml           \
+    --disable-opengl-renderer   \
+    --disable-external-glew     \
+    --disable-irrlicht-renderer \
+    --disable-directfb-renderer \
+    --disable-samples           \
+    --disable-lua-module        \
+    --disable-toluacegui        \
+    --disable-external-toluapp  \
+
+$(eval $(autotools-package))

index 97d38af..33d4525 100644
@@ -463,6 +463,7 @@ source "package/libupnp/Config.in"
 source "package/libvncserver/Config.in"
 source "package/nss-mdns/Config.in"
 source "package/ortp/Config.in"
+source "package/slirp/Config.in"
 source "package/usbredir/Config.in"
 source "package/zeromq/Config.in"
 endmenu

new file mode 100644
index 0000000..dedded3
@@ -0,0 +1,25 @@
+config BR2_PACKAGE_SLIRP
+	bool "slirp"
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the slirp-part for Spice.
+	  Slirp emulates a PPP or SLIP connection over a normal terminal.
+	  
+	  http://www.spice-space.org/
+	  
+	  NOTE:
+	  This package has some history of a unique kind:
+	    - originally developped as 'slirp' by Danny Gasparovski, and
+	      seemingly abandonned (developper /disapeared/)
+	    - then re-maintained at sourceforge by "Kelly", up to some
+	      time around 2009: http://slirp.sourceforge.net/
+	    - during that period, QEMU (Fabrice BELLARD) forked the code
+	      and included it in QEMU
+	    - and it was imported from this breed by the Spice project
+	      around May 2009
+	    - which is what we use here

new file mode 100644
index 0000000..04a4736
@@ -0,0 +1,15 @@
+#############################################################
+#
+# Spice-slirp
+#
+#############################################################
+
+SLIRP_VERSION         = 8c2da74c1385242f20799fec8c04f8378edc6550
+SLIRP_SITE            = git://anongit.freedesktop.org/spice/slirp
+SLIRP_LICENSE         = BSD-4c BSD-2c
+# Note: The license file 'COPYRIGHT' is missing from the sources,
+# although some files refer to it.
+SLIRP_INSTALL_STAGING = YES
+SLIRP_AUTORECONF      = YES
+
+$(eval $(autotools-package))

index 33d4525..844873a 100644
@@ -632,6 +632,7 @@ source "package/socat/Config.in"
 source "package/socketcand/Config.in"
 source "package/spawn-fcgi/Config.in"
 source "package/spice-protocol/Config.in"
+source "package/spice/Config.in"
 source "package/squid/Config.in"
 source "package/stunnel/Config.in"
 source "package/tcpdump/Config.in"

new file mode 100644
index 0000000..ced3ec7
@@ -0,0 +1,23 @@
+comment "spice server depends on python"
+	depends on !BR2_PACKAGE_PYTHON
+
+config BR2_PACKAGE_SPICE
+	bool "spice server"
+	depends on BR2_PACKAGE_PYTHON
+	select BR2_PACKAGE_PYTHON_PYPARSING
+	select BR2_PACKAGE_SPICE_PROTOCOL
+	select BR2_PACKAGE_PIXMAN
+	select BR2_PACKAGE_CELT051
+	select BR2_PACKAGE_ALSA_LIB
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_JPEG
+	help
+	  The Spice project aims to provide a complete open source
+	  solution for interaction with virtualized desktop devices.
+	  The Spice project deals with both the virtualized devices
+	  and the front-end. Interaction between front-end and
+	  back-end is done using VD-Interfaces.
+	  
+	  This package implements the server-part of Spice.
+	  
+	  http://www.spice-space.org/

47 lines not on this page · raw message

index ced3ec7..e906acf 100644
@@ -21,3 +21,15 @@ config BR2_PACKAGE_SPICE
 	  This package implements the server-part of Spice.
 	  
 	  http://www.spice-space.org/
+
+if BR2_PACKAGE_SPICE
+
+comment "client depends on X.org"
+	depends on !BR2_PACKAGE_XORG7
+
+config BR2_PACKAGE_SPICE_CLIENT
+	bool "Enable client"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_XLIB_LIBXRANDR
+
+endif # BR2_PACKAGE_SPICE

index 37b1bff..de7bf71 100644
@@ -26,10 +26,16 @@ SPICE_CONF_OPT =            \
   --disable-gui             \
   --disable-opengl          \
   --disable-smartcard       \
-  --disable-client          \
   --disable-automated-tests \
   --without-sasl            \
 
+ifeq ($(BR2_PACKAGE_SPICE_CLIENT),y)
+SPICE_CONF_OPT += --enable-client
+SPICE_DEPENDENCIES += xlib_libXrandr xlib_libXfixes
+else
+SPICE_CONF_OPT += --disable-client
+endif
+
 SPICE_DEPENDENCIES += host-pkg-config
 
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages

index e906acf..6e6233d 100644
@@ -32,4 +32,12 @@ config BR2_PACKAGE_SPICE_CLIENT
 	depends on BR2_PACKAGE_XORG7
 	select BR2_PACKAGE_XLIB_LIBXRANDR
 
+config BR2_PACKAGE_SPICE_GUI
+	bool "Enable GUI"
+	depends on BR2_PACKAGE_SPICE_CLIENT
+	select BR2_PACKAGE_CEGUI06
+	help
+	  Say 'y' here to enable the Graphical User Interface (GUI)
+	  start dialog.
+
 endif # BR2_PACKAGE_SPICE

index de7bf71..9253e35 100644
@@ -23,7 +23,6 @@ SPICE_DEPENDENCIES    = \
 # quite deep if we try to enable some features, and I have not tested that.
 SPICE_CONF_OPT =            \
   --disable-tunnel          \
-  --disable-gui             \
   --disable-opengl          \
   --disable-smartcard       \
   --disable-automated-tests \

@@ -36,6 +35,13 @@ else
 SPICE_CONF_OPT += --disable-client
 endif
 
+ifeq ($(BR2_PACKAGE_SPICE_GUI),y)
+SPICE_CONF_OPT += --enable-gui
+SPICE_DEPENDENCIES += cegui06
+else
+SPICE_CONF_OPT += --disable-gui
+endif
+
 SPICE_DEPENDENCIES += host-pkg-config
 
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages

index 6e6233d..846bee1 100644
@@ -40,4 +40,11 @@ config BR2_PACKAGE_SPICE_GUI
 	  Say 'y' here to enable the Graphical User Interface (GUI)
 	  start dialog.
 
+config BR2_PACKAGE_SPICE_TUNNEL
+	bool "Enable network redirection"
+	select BR2_PACKAGE_SLIRP
+	help
+	  Say 'y' here to enable network redirection, aka tunnelling
+	  through a SLIP/SLIRP session.
+
 endif # BR2_PACKAGE_SPICE

index 9253e35..2bc452b 100644
@@ -22,7 +22,6 @@ SPICE_DEPENDENCIES    = \
 # We disable everything for now, because the dependency tree can become
 # quite deep if we try to enable some features, and I have not tested that.
 SPICE_CONF_OPT =            \
-  --disable-tunnel          \
   --disable-opengl          \
   --disable-smartcard       \
   --disable-automated-tests \

@@ -42,6 +41,13 @@ else
 SPICE_CONF_OPT += --disable-gui
 endif
 
+ifeq ($(BR2_PACKAGE_SPICE_TUNNEL),y)
+SPICE_CONF_OPT += --enable-tunnel
+SPICE_DEPENDENCIES += slirp
+else
+SPICE_CONF_OPT += --disable-tunnel
+endif
+
 SPICE_DEPENDENCIES += host-pkg-config
 
 SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages

index 844873a..ba3ef2c 100644
@@ -489,6 +489,7 @@ source "package/libical/Config.in"
 source "package/libnspr/Config.in"
 source "package/libsigc/Config.in"
 source "package/libtpl/Config.in"
+source "package/libseccomp/Config.in"
 source "package/liburcu/Config.in"
 source "package/linux-pam/Config.in"
 source "package/lttng-libust/Config.in"

new file mode 100644
index 0000000..183cf4e
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_LIBSECCOMP
+	bool "libseccomp"
+	help
+	  High level interface to the Linux Kernel's seccomp filter 
+	  
+	  The libseccomp library provides and easy to use, platform independent,
+	  interface to the Linux Kernel's syscall filtering mechanism: seccomp.
+	  The libseccomp API is designed to abstract away the underlying BPF
+	  based syscall filter language and present a more conventional
+	  function-call based filtering interface that should be familiar to,
+	  and easily adopted by application developers.
+	  
+	  http://sourceforge.net/projects/libseccomp/

new file mode 100644
index 0000000..f287377
@@ -0,0 +1,19 @@
+diff -du libseccomp-1.0.0.orig/configure libseccomp-1.0.0/configure
+--- libseccomp-1.0.0.orig/configure	2012-07-27 22:35:05.000000000 +0200
++++ libseccomp-1.0.0/configure	2012-09-07 00:00:09.918429292 +0200
+@@ -205,7 +205,8 @@
+ #
+ 
+ # system seccomp includes
+-if [[ -r "/usr/include/linux/seccomp.h" ]]; then
++# ${SYSROOT} added by buildroot for cross-compilation
++if [[ -r "${SYSROOT}/usr/include/linux/seccomp.h" ]]; then
+ 	opt_sysinc_seccomp="yes"
+ else
+ 	opt_sysinc_seccomp="no"
+Common subdirectories: libseccomp-1.0.0.orig/doc and libseccomp-1.0.0/doc
+Common subdirectories: libseccomp-1.0.0.orig/include and libseccomp-1.0.0/include
+Common subdirectories: libseccomp-1.0.0.orig/install and libseccomp-1.0.0/install
+Common subdirectories: libseccomp-1.0.0.orig/src and libseccomp-1.0.0/src
+Common subdirectories: libseccomp-1.0.0.orig/tests and libseccomp-1.0.0/tests
+Common subdirectories: libseccomp-1.0.0.orig/tools and libseccomp-1.0.0/tools

new file mode 100644
index 0000000..73fe632
@@ -0,0 +1,22 @@
+#############################################################
+#
+# libseccomp
+#
+#############################################################
+
+LIBSECCOMP_VERSION         = 1.0.0
+LIBSECCOMP_SOURCE          = libseccomp-$(LIBSECCOMP_VERSION).tar.gz
+LIBSECCOMP_SITE            = http://downloads.sourceforge.net/project/libseccomp
+LIBSECCOMP_LICENSE         = LGPLv2.1
+LIBSECCOMP_LICENSE_FILES   = LICENSE
+LIBSECCOMP_INSTALL_STAGING = YES
+
+# Needed for configure to find our system headers:
+LIBSECCOMP_CONF_ENV            = SYSROOT=$(STAGING_DIR)
+LIBSECCOMP_MAKE_ENV            = $(TARGET_CONFIGURE_OPTS)
+LIBSECCOMP_MAKE_OPT            = SUBDIRS_BUILD=src
+LIBSECCOMP_INSTALL_STAGING_OPT = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(STAGING_DIR) install
+LIBSECCOMP_INSTALL_TARGET_OPT  = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(TARGET_DIR) install
+
+# Not a real autotools package, but works quite OK nonetheless
+$(eval $(autotools-package))

index ba3ef2c..f3d78d0 100644
@@ -706,6 +706,7 @@ endif
 source "package/bwm-ng/Config.in"
 source "package/cpuload/Config.in"
 source "package/htop/Config.in"
+source "package/keyutils/Config.in"
 source "package/kmod/Config.in"
 if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
 source "package/module-init-tools/Config.in"

new file mode 100644
index 0000000..9b5a24b
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_KEYUTILS
+	bool "keyutils"
+	help
+	  These tools are used to control the key management system
+	  built into the Linux kernel.
+	  
+	  http://people.redhat.com/~dhowells/keyutils/

51 lines not on this page · raw message

new file mode 100644
index 0000000..f74fd79
@@ -0,0 +1,32 @@
+Patch vampirised from Debian's packaging of keyutils-1.4
+
+Author: Michael Gebetsroither <[email protected]>
+Description: Fixed another memleak (Closes: #496466).
+
+diff -Naurp keyutils.orig/keyutils.c keyutils/keyutils.c
+--- keyutils.orig/keyutils.c	2008-08-09 21:46:52.000000000 +0200
++++ keyutils/keyutils.c	2008-08-25 13:38:25.000000000 +0200
+@@ -187,8 +187,10 @@ int keyctl_describe_alloc(key_serial_t i
+ 
+ 	for (;;) {
+ 		ret = keyctl_describe(id, buf, buflen);
+-		if (ret < 0)
++		if (ret < 0) {
++            free(buf);
+ 			return -1;
++        }
+ 
+ 		if (buflen >= ret)
+ 			break;
+@@ -226,8 +228,10 @@ int keyctl_read_alloc(key_serial_t id, v
+ 
+ 	for (;;) {
+ 		ret = keyctl_read(id, buf, buflen);
+-		if (ret < 0)
++		if (ret < 0) {
++            free(buf);
+ 			return -1;
++        }
+ 
+ 		if (buflen >= ret)
+ 			break;

new file mode 100644
index 0000000..b2903f9
@@ -0,0 +1,15 @@
+Patch vampirised from Debian's packaging of keyutils-1.4
+
+Author: Marcus Meissner <[email protected]>
+Description: Added 2 cifs helpers to request-key.conf (for CIFS DFS support)
+
+diff -Naurp keyutils.orig/request-key.conf keyutils/request-key.conf
+--- keyutils.orig/request-key.conf	2008-09-07 23:53:10.000000000 +0000
++++ keyutils/request-key.conf	2009-02-05 00:53:00.000000000 +0000
+@@ -34,4 +34,6 @@
+ create	user	debug:*		negate		/bin/keyctl negate %k 30 %S
+ create	user	debug:loop:*	*		|/bin/cat
+ create	user	debug:*		*		/usr/share/keyutils/request-key-debug.sh %k %d %c %S
++create	cifs.spnego	*	*		/usr/sbin/cifs.upcall -c %k
++create	dns_resolver	*	*		/usr/sbin/cifs.upcall %k
+ negate	*	*		*		/bin/keyctl negate %k 30 %S

65 lines not on this page · raw message

new file mode 100644
index 0000000..74e5670
@@ -0,0 +1,19 @@
+Makefile: fix install rule
+
+Do not link the .so with an absolute path, otherwise it may point to
+the host library.
+
+Signed-off-by: "Yann E. MORIN" <[email protected]>
+
+diff -durN keyutils-1.5.5.orig/Makefile keyutils-1.5.5/Makefile
+--- keyutils-1.5.5.orig/Makefile	2012-10-22 20:11:57.188548033 +0200
++++ keyutils-1.5.5/Makefile	2012-10-22 20:14:40.868236838 +0200
+@@ -127,7 +127,7 @@
+ 	$(INSTALL) -D $(LIBNAME) $(DESTDIR)$(LIBDIR)/$(LIBNAME)
+ 	$(LNS) $(LIBNAME) $(DESTDIR)$(LIBDIR)/$(SONAME)
+ 	mkdir -p $(DESTDIR)$(USRLIBDIR)
+-	$(LNS) $(LIBDIR)/$(SONAME) $(DESTDIR)$(USRLIBDIR)/$(DEVELLIB)
++	$(LNS) $(SONAME) $(DESTDIR)$(USRLIBDIR)/$(DEVELLIB)
+ 	$(INSTALL) -D keyctl $(DESTDIR)$(BINDIR)/keyctl
+ 	$(INSTALL) -D request-key $(DESTDIR)$(SBINDIR)/request-key
+ 	$(INSTALL) -D request-key-debug.sh $(DESTDIR)$(SHAREDIR)/request-key-debug.sh

new file mode 100644
index 0000000..184b58d
@@ -0,0 +1,32 @@
+#############################################################
+#
+# keyutils
+#
+##############################################################
+
+KEYUTILS_VERSION         = 1.5.5
+KEYUTILS_SOURCE          = keyutils-$(KEYUTILS_VERSION).tar.bz2
+KEYUTILS_SITE            = http://people.redhat.com/~dhowells/keyutils
+KEYUTILS_LICENSE         = GPLv2+ LGPLv2.1+
+KEYUTILS_LICENSE_FILES   = LICENCE.GPL LICENCE.LGPL
+KEYUTILS_INSTALL_STAGING = YES
+
+KEYUTILS_MAKE_ENV =     \
+    INSTALL=$(INSTALL)  \
+    LIBDIR=/usr/lib     \
+    USRLIBDIR=/usr/lib  \
+    LN=$(HOSTLN)        \
+
+define KEYUTILS_BUILD_CMDS
+	$(KEYUTILS_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D)
+endef
+
+define KEYUTILS_INSTALL_STAGING_CMDS
+	$(KEYUTILS_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
+endef
+
+define KEYUTILS_INSTALL_TARGET_CMDS
+	$(KEYUTILS_MAKE_ENV) $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(generic-package))

new file mode 100644
index 0000000..1786690
@@ -0,0 +1,2624 @@
+Patch vampirised from Debian's package pmake_1.111-3.2:
+    http://snapshot.debian.org/archive/debian/20120601T033558Z/pool/main/p/pmake/
+
+Signed-off-by: "Yann E. MORIN" <[email protected]>
+
+--- pmake-1.111.orig/mk/Makefile
++++ pmake-1.111/mk/Makefile
+@@ -0,0 +1,16 @@
++#	$NetBSD: Makefile,v 1.24 1999/02/13 02:54:36 lukem Exp $
++#	@(#)Makefile	8.1 (Berkeley) 6/8/93
++
++.include <bsd.own.mk>
++
++.if ${MKSHARE} != "no"
++FILES=	bsd.README bsd.doc.mk bsd.dep.mk bsd.files.mk bsd.inc.mk bsd.info.mk \
++	bsd.kinc.mk bsd.kmod.mk bsd.lib.mk bsd.links.mk bsd.man.mk bsd.nls.mk \
++	bsd.obj.mk bsd.own.mk bsd.prog.mk bsd.subdir.mk bsd.sys.mk sys.mk
++FILESDIR=/usr/share/mk
++.endif
++MKOBJ=	no
++
++FILESMODE=444
++
++.include <bsd.prog.mk>
+--- pmake-1.111.orig/mk/bsd.README
++++ pmake-1.111/mk/bsd.README
+@@ -0,0 +1,536 @@
++#	$NetBSD: bsd.README,v 1.48 1999/02/13 03:04:09 lukem Exp $
++#	@(#)bsd.README	8.2 (Berkeley) 4/2/94
++
++This is the README file for the new make "include" files for the BSD
++source tree.  The files are installed in /usr/share/mk, and are, by
++convention, named with the suffix ".mk".
++
++Note, this file is not intended to replace reading through the .mk
++files for anything tricky.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++RANDOM THINGS WORTH KNOWING:
++
++The files are simply C-style #include files, and pretty much behave like
++you'd expect.  The syntax is slightly different in that a single '.' is
++used instead of the hash mark, i.e. ".include <bsd.prog.mk>".
++
++One difference that will save you lots of debugging time is that inclusion
++of the file is normally done at the *end* of the Makefile.  The reason for
++this is because .mk files often modify variables and behavior based on the
++values of variables set in the Makefile.  To make this work, remember that
++the FIRST target found is the target that is used, i.e. if the Makefile has:
++
++	a:
++		echo a
++	a:
++		echo a number two
++
++the command "make a" will echo "a".  To make things confusing, the SECOND
++variable assignment is the overriding one, i.e. if the Makefile has:
++
++	a=	foo
++	a=	bar
++
++	b:
++		echo ${a}
++
++the command "make b" will echo "bar".  This is for compatibility with the
++way the V7 make behaved.
++
++It's fairly difficult to make the BSD .mk files work when you're building
++multiple programs in a single directory.  It's a lot easier split up the
++programs than to deal with the problem.  Most of the agony comes from making
++the "obj" directory stuff work right, not because we switched to a new version
++of make.  So, don't get mad at us, figure out a better way to handle multiple
++architectures so we can quit using the symbolic link stuff.  (Imake doesn't
++count.)
++
++The file .depend in the source directory is expected to contain dependencies
++for the source files.  This file is read automatically by make after reading
++the Makefile.
++
++The variable DESTDIR works as before.  It's not set anywhere but will change
++the tree where the file gets installed.
++
++The profiled libraries are no longer built in a different directory than
++the regular libraries.  A new suffix, ".po", is used to denote a profiled
++object, and ".so" denotes a shared (position-independent) object.
++
++The following variables that control how things are made/installed that
++are not set by default. These should not be set by Makefiles; they're for
++the user to define in MAKECONF (see bsd.own.mk, below) or on the make(1)
++command line:
++
++BUILD 		If defined, 'make install' checks that the targets in the
++		source directories are up-to-date and remakes them if they
++                are out of date, instead of blindly trying to install
++                out of date or non-existant targets.
++
++UPDATE 		If defined, 'make install' only installs targets that are
++		more recently modified in the source directories that their
++		installed counterparts.
++
++MKCATPAGES	If "no", don't build or install the catman pages.
++
++MKDOC		If "no", don't build or install the documentation.
++
++MKINFO		If "no", don't build or install Info documentation from
++		Texinfo source files.
++
++MKLINT		If "no", don't build or install the lint libraries.
++
++MKMAN		If "no", don't build or install the man or catman pages.
++		Also acts as "MKCATPAGES=no"
++
++MKNLS		If "no", don't build or install the NLS files.
++
++MKOBJ		If "no", don't create objdirs.
++
++MKPIC		If "no", don't build or install shared libraries.
++
++MKPICINSTALL	If "no", don't install the *_pic.a libraries.
++
++MKPROFILE	If "no", don't build or install the profiling libraries.
++
++MKSHARE		If "no", act as "MKCATPAGES=no MKDOC=no MKINFO=no MKMAN=no
++		MKNLS=no".  I.e, don't build catman pages, documentation,
++		Info documentation, man pages, NLS files, ...
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <sys.mk> has the default rules for all makes, in the BSD
++environment or otherwise.  You probably don't want to touch this file.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.man.mk> handles installing manual pages and their
++links.
++
++It has a two targets:
++
++	maninstall:
++		Install the manual page sources and their links.
++	catinstall:
++		Install the preformatted manual pages and their links.
++
++It sets/uses the following variables:
++
++MANDIR		Base path for manual installation.
++
++MANGRP		Manual group.
++
++MANOWN		Manual owner.
++
++MANMODE		Manual mode.
++
++MANSUBDIR	Subdirectory under the manual page section, i.e. "/vax"
++		or "/tahoe" for machine specific manual pages.
++
++MAN		The manual pages to be installed (use a .1 - .9 suffix).
++
++MLINKS		List of manual page links (using a .1 - .9 suffix).  The
++		linked-to file must come first, the linked file second,
++		and there may be multiple pairs.  The files are soft-linked.
++
++The include file <bsd.man.mk> includes a file named "../Makefile.inc" if
++it exists.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.own.mk> contains source tree configuration parameters,
++such as the owners, groups, etc. for both manual pages and binaries, and
++a few global "feature configuration" parameters.
++
++It has no targets.
++
++To get system-specific configuration parameters, bsd.own.mk will try to
++include the file specified by the "MAKECONF" variable.  If MAKECONF is not
++set, or no such file exists, the system make configuration file, /etc/mk.conf
++is included.  These files may define any of the variables described below.
++
++bsd.own.mk sets the following variables, if they are not already defined
++(defaults are in brackets):
++
++BSDSRCDIR	The real path to the system sources, so that 'make obj'
++		will work correctly. [/usr/src]
++
++BSDOBJDIR	The real path to the system 'obj' tree, so that 'make obj'
++		will work correctly. [/usr/obj]
++
++BINGRP		Binary group. [wheel]
++
++BINOWN		Binary owner. [root]
++
++BINMODE		Binary mode. [555]
++
++NONBINMODE	Mode for non-executable files. [444]
++
++MANDIR		Base path for manual installation. [/usr/share/man/cat]
++
++MANGRP		Manual group. [wheel]
++
++MANOWN		Manual owner. [root]
++
++MANMODE		Manual mode. [${NONBINMODE}]
++
++MANINSTALL	Manual installation type: maninstall, catinstall, or both
++
++LIBDIR		Base path for library installation. [/usr/lib]
++
++LINTLIBDIR	Base path for lint(1) library installation. [/usr/libdata/lint]
++
++LIBGRP		Library group. [${BINGRP}]
++
++LIBOWN		Library owner. [${BINOWN}]
++
++LIBMODE		Library mode. [${NONBINMODE}]
++
++DOCDIR		Base path for system documentation (e.g. PSD, USD, etc.)
++	        installation. [/usr/share/doc]
++
++DOCGRP		Documentation group. [wheel]
++
++DOCOWN		Documentation owner. [root]
++
++DOCMODE		Documentation mode. [${NONBINMODE}]
++
++NLSDIR		Base path for National Language Support files installation.
++		[/usr/share/nls]
++
++NLSGRP		National Language Support files group. [wheel]
++
++NLSOWN		National Language Support files owner. [root]
++
++NLSMODE		National Language Support files mode. [${NONBINMODE}]
++
++STRIPFLAG	The flag passed to the install program to cause the binary
++		to be stripped.  This is to be used when building your
++		own install script so that the entire system can be made
++		stripped/not-stripped using a single knob. [-s]
++
++COPY		The flag passed to the install program to cause the binary
++		to be copied rather than moved.  This is to be used when
++		building our own install script so that the entire system
++		can either be installed with copies, or with moves using
++		a single knob. [-c]
++
++Additionally, the following variables may be set by bsd.own.mk or in a
++make configuration file to modify the behaviour of the system build
++process (default values are in brackets along with comments, if set by
++bsd.own.mk):
++
++EXPORTABLE_SYSTEM
++		Do not build /usr/src/domestic, even if it is present.
++
++SKEY		Compile in support for S/key authentication. [yes, set
++		unconditionally]
++
++KERBEROS	Compile in support for Kerberos 4 authentication.
++
++KERBEROS5	Compile in support for Kerberos 5 authentication.
++
++MANZ		Compress manual pages at installation time.
++
++SYS_INCLUDE	Copy or symlink kernel include files into /usr/include.
++		Possible values are "symlinks" or "copies" (which is
++		the same as the variable being unset).
++
++NOPROFILE	Do not build profiled versions of system libraries
++
++NOPIC		Do not build PIC versions of system libraries, and
++		do not build shared libraries.
++
++NOLINT		Do not build lint libraries.
++
++OBJECT_FMT	Object file format. [set to "ELF" on  ports that use
++		ELF -- currently if ${MACHINE_ARCH} is "alpha", "mips"
++		or "powerpc" or  set to "a.out" on other ports].
++
++
++bsd.own.mk is generally useful when building your own Makefiles so that
++they use the same default owners etc. as the rest of the tree.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.prog.mk> handles building programs from one or
++more source files, along with their manual pages.  It has a limited number
++of suffixes, consistent with the current needs of the BSD tree.
++
++It has eight targets:
++
++	all:
++		build the program and its manual page
++	clean:
++		remove the program, any object files and the files a.out,
++		Errs, errs, mklog, and ${PROG}.core.
++	cleandir:
++		remove all of the files removed by the target clean, as
++		well as .depend, tags, and any manual pages.
++		`distclean' is a synonym for `cleandir'.
++	depend:
++		make the dependencies for the source files, and store
++		them in the file .depend.
++	includes:
++		install any header files.
++	install:
++		install the program and its manual pages; if the Makefile
++		does not itself define the target install, the targets
++		beforeinstall and afterinstall may also be used to cause
++		actions immediately before and after the install target
++		is executed.
++	lint:
++		run lint on the source files
++	tags:
++		create a tags file for the source files.
++
++It sets/uses the following variables:
++
++BINGRP		Binary group.
++
++BINOWN		Binary owner.
++
++BINMODE		Binary mode.
++
++CLEANFILES	Additional files to remove for the clean and cleandir targets.
++
++COPTS		Additional flags to the compiler when creating C objects.
++
++CPPFLAGS	Additional flags to the C pre-processor
++
++LDADD		Additional loader objects.  Usually used for libraries.
++		For example, to load with the compatibility and utility
++		libraries, use:
++
++			LDADD+=-lutil -lcompat
++
++LDFLAGS		Additional loader flags.
++
++LINKS		The list of binary links; should be full pathnames, the
++		linked-to file coming first, followed by the linked
++		file.  The files are hard-linked.  For example, to link
++		/bin/test and /bin/[, use:
++
++			LINKS=	${DESTDIR}/bin/test ${DESTDIR}/bin/[
++
++SYMLINKS	The list of symbolic links; should be full pathnames.
++                Syntax is identical to LINKS. Note that DESTDIR is not
++		automatically included in the link.
++
++MAN		Manual pages (should end in .1 - .9).  If no MAN variable is
++		defined, "MAN=${PROG}.1" is assumed.
++
++PROG		The name of the program to build.  If not supplied, nothing
++		is built.
++
++PROGNAME	The name that the above program will be installed as, if
++		different from ${PROG}.
++
++SRCS		List of source files to build the program.  If SRCS is not
++		defined, it's assumed to be ${PROG}.c.
++
++DPADD		Additional dependencies for the program.  Usually used for
++		libraries.  For example, to depend on the compatibility and
++		utility libraries use:
++
++			DPADD+=${LIBCOMPAT} ${LIBUTIL}
++
++		The following libraries are predefined for DPADD:
++
++		LIBC?=		${DESTDIR}/usr/lib/libc.a
++		LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
++		LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
++		LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
++		LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
++		LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
++		LIBDES?=	${DESTDIR}/usr/lib/libdes.a
++		LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
++		LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
++		LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
++		LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
++		LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
++		LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
++		LIBL?=		${DESTDIR}/usr/lib/libl.a
++		LIBM?=		${DESTDIR}/usr/lib/libm.a
++		LIBMP?=		${DESTDIR}/usr/lib/libmp.a
++		LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
++		LIBPC?=		${DESTDIR}/usr/lib/libpc.a
++		LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
++		LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
++		LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
++		LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
++		LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
++		LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
++		LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
++		LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
++		LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
++		LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
++		LIBY?=		${DESTDIR}/usr/lib/liby.a
++		LIBZ?=		${DESTDIR}/usr/lib/libz.a
++
++
++SHAREDSTRINGS	If defined, a new .c.o rule is used that results in shared
++		strings, using xstr(1). Note that this will not work with
++		parallel makes.
++
++STRIP		The flag passed to the install program to cause the binary
++		to be stripped.
++
++SUBDIR		A list of subdirectories that should be built as well.
++		Each of the targets will execute the same target in the
++		subdirectories.
++
++SCRIPTS		A list of interpreter scripts [file.{sh,csh,pl,awk,...}].
++		These are installed exactly like programs.
++
++SCRIPTSNAME	The name that the above program will be installed as, if
++		different from ${SCRIPTS}. These can be further specialized
++		by setting SCRIPTSNAME_<script>.
++
++FILES		A list of files to install. The installation is controlled
++		by the FILESNAME, FILESOWN, FILESGRP, FILESMODE, FILESDIR
++		variables that can be further specialized by FILES<VAR>_<file>
++
++The include file <bsd.prog.mk> includes the file named "../Makefile.inc"
++if it exists, as well as the include file <bsd.man.mk>.
++
++Some simple examples:
++
++To build foo from foo.c with a manual page foo.1, use:
++
++	PROG=	foo
++
++	.include <bsd.prog.mk>
++
++To build foo from foo.c with a manual page foo.2, add the line:
++
++	MAN=	foo.2
++
++If foo does not have a manual page at all, add the line:
++
++	NOMAN=	noman
++
++If foo has multiple source files, add the line:
++
++	SRCS=	a.c b.c c.c d.c
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.subdir.mk> contains the default targets for building
++subdirectories.  It has the same eight targets as <bsd.prog.mk>: all, 
++clean, cleandir, depend, includes, install, lint, and tags.  For all of
++the directories listed in the variable SUBDIRS, the specified directory 
++will be visited and the target made.  There is also a default target which
++allows the command "make subdir" where subdir is any directory listed in
++the variable SUBDIRS.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.links.mk> handles the LINKS and SYMLINKS variables
++and is included from from bsd.lib.mk and bsd.prog.mk.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.files.mk> handles the FILES variables and is included
++from bsd.lib.mk and bsd.prog.mk.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.inc.mk> defines the includes target and uses two
++variables:
++
++INCS	The list of include files
++
++INCSDIR	The location to install the include files.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.kinc.mk> defines the many targets (includes,
++subdirectories, etc.), and is used by kernel makefiles to handle
++include file installation.  It is intended to be included alone, by
++kernel Makefiles.  Please see bsd.kinc.mk for more details, and keep
++the documentation in that file up to date.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.info.mk> is used to generate and install GNU Info
++documentation from respective Texinfo source files.  It defines three
++implicit targets (.txi.info, .texi.info, and .texinfo.info), and uses the
++following variables:
++
++TEXINFO		List of Texinfo source files.  Info documentation will
++		consist of single files with the extension replaced by
++		.info.
++
++INFOFLAGS	Flags to pass to makeinfo.  []
++
++INSTALL_INFO	Name of install-info program.  [install-info]
++
++MAKEINFO	Name of makeinfo program.  [makeinfo]
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.sys.mk> is used by <bsd.prog.mk> and
++<bsd.lib.mk>.  It contains overrides that are used when building
++the NetBSD source tree.  For instance, if "PARALLEL" is defined by
++the program/library Makefile, it includes a set of rules for lex and
++yacc that allow multiple lex and yacc targets to be built in parallel.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
++
++The include file <bsd.lib.mk> has support for building libraries.  It has
++the same eight targets as <bsd.prog.mk>: all, clean, cleandir, depend,
++includes, install, lint, and tags.  Additionally, it has a checkver target
++which checks for installed shared object libraries whose version is greater
++that the version of the source. It has a limited number of suffixes,
++consistent with the current needs of the BSD tree.
++
++It sets/uses the following variables:
++
++LIB		The name of the library to build.
++
++LIBDIR		Target directory for libraries.
++
++LINTLIBDIR	Target directory for lint libraries.
++
++LIBGRP		Library group.
++
++LIBOWN		Library owner.
++
++LIBMODE		Library mode.
++
++LDADD		Additional loader objects.
++
++MAN		The manual pages to be installed (use a .1 - .9 suffix).
++
++MKLINKLIB	If "no", act as "MKPICINSTALL=no MKPROFILE=no".
++		Also:
++			- don't install the .a libraries
++			- don't install _pic.a libraries on PIC systems
++			- don't build .a libraries on PIC systems
++			- don't install the .so symlink on ELF systems
++		I.e, only install the shared library (and the .so.major
++		symlink on ELF).
++
++NOCHECKVER_<library>
++NOCHECKVER	If set, disables checking for installed shared object
++		libraries with versions greater than the source.  A
++		particular library name, without the "lib" prefix, may
++		be appended to the variable name to disable the check for
++		only that library.
++
++SRCS		List of source files to build the library.  Suffix types
++		.s, .c, and .f are supported.  Note, .s files are preferred
++		to .c files of the same name.  (This is not the default for
++		versions of make.)
++
++The include file <bsd.lib.mk> includes the file named "../Makefile.inc"
++if it exists, as well as the include file <bsd.man.mk>.
++
++It has rules for building profiled objects; profiled libraries are
++built by default.
++
++Libraries are ranlib'd when made.
++
++=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
+--- pmake-1.111.orig/mk/bsd.dep.mk
++++ pmake-1.111/mk/bsd.dep.mk
+@@ -0,0 +1,62 @@
++#	$NetBSD: bsd.dep.mk,v 1.26 1999/02/24 22:04:15 simonb Exp $
++
++.PHONY:		cleandepend
++cleandir distclean: cleandepend
++
++MKDEP?=		mkdep
++
++# some of the rules involve .h sources, so remove them from mkdep line
++depend: beforedepend
++.if defined(SRCS)
++depend: .depend
++	@true # hack to prevent "make depend" from using implicit rules
++.NOPATH: .depend
++.depend: ${SRCS} ${DPSRCS}
++	@rm -f .depend
++	@files="${.ALLSRC:M*.s} ${.ALLSRC:M*.S}"; \
++	if [ "$$files" != " " ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${AFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} ${AINC:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${AFLAGS:M-[ID]*} ${CPPFLAGS} ${AINC} $$files; \
++	fi
++	@files="${.ALLSRC:M*.c}"; \
++	if [ "$$files" != "" ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++	@files="${.ALLSRC:M*.m}"; \
++	if [ "$$files" != "" ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${OBJCFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${OBJCFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++	@files="${.ALLSRC:M*.cc} ${.ALLSRC:M*.C} ${.ALLSRC:M*.cxx}"; \
++	if [ "$$files" != "  " ]; then \
++	  echo ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CXXFLAGS:M-[ID]*:Q} ${CPPFLAGS:Q} $$files; \
++	  ${MKDEP} -a ${MKDEPFLAGS} \
++	    ${CXXFLAGS:M-[ID]*} ${CPPFLAGS} $$files; \
++	fi
++cleandepend:
++	rm -f .depend ${.CURDIR}/tags
++.else
++cleandepend:
++.endif
++depend: afterdepend
++
++beforedepend:
++afterdepend:
++
++.if !target(tags)
++.if defined(SRCS)
++tags: ${SRCS}
++	-cd ${.CURDIR}; ctags -f /dev/stdout ${.ALLSRC:N*.h} | \
++	    sed "s;\${.CURDIR}/;;" > tags
++.else
++tags:
++.endif
++.endif
+--- pmake-1.111.orig/mk/bsd.doc.mk
++++ pmake-1.111/mk/bsd.doc.mk
+@@ -0,0 +1,78 @@
++#	$NetBSD: bsd.doc.mk,v 1.41 1999/02/12 01:10:06 lukem Exp $
++#	@(#)bsd.doc.mk	8.1 (Berkeley) 8/14/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleandoc docinstall print spell
++.if ${MKSHARE} != "no"
++realinstall:	docinstall
++.endif
++clean cleandir distclean: cleandoc
++
++BIB?=		bib
++EQN?=		eqn
++GREMLIN?=	grn
++GRIND?=		vgrind -f
++INDXBIB?=	indxbib
++PIC?=		pic
++REFER?=		refer
++ROFF?=         groff ${MACROS} ${PAGES}
++SOELIM?=	soelim
++TBL?=		tbl
++
++.if !target(all)
++.if ${MKSHARE} != "no"
++all: paper.ps
++.else
++all:
++.endif
++.endif
++
++.if !target(paper.ps)
++paper.ps: ${SRCS}
++	${ROFF} ${.ALLSRC} > ${.TARGET}
++.endif
++
++.if !target(print)
++print: paper.ps
++	lpr -P${PRINTER} ${.ALLSRC}
++.endif
++
++cleandoc:
++	rm -f paper.* [eE]rrs mklog ${CLEANFILES}
++
++.if ${MKDOC} != "no"
++FILES?=	${SRCS}
++.for F in ${FILES} ${EXTRA} Makefile
++docinstall:: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${DOCDIR}/${DIR}/${F}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${DOCDIR}/${DIR}/${F}
++${DESTDIR}${DOCDIR}/${DIR}/${F}: ${F}
++	${INSTALL} ${RENAME} ${PRESERVE} -c -o ${DOCOWN} -g ${DOCGRP} \
++		-m ${DOCMODE} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(docinstall)
++docinstall::
++.endif
++
++spell: ${SRCS}
++	spell ${.ALLSRC} | sort | comm -23 - spell.ok > paper.spell
++
++depend includes lint obj tags:
++
++.include <bsd.obj.mk>
+--- pmake-1.111.orig/mk/bsd.files.mk
++++ pmake-1.111/mk/bsd.files.mk
+@@ -0,0 +1,43 @@
++#	$NetBSD: bsd.files.mk,v 1.8 1999/02/11 13:25:42 tv Exp $
++
++# This file can be included multiple times.  It clears the definition of
++# FILES at the end so that this is possible.
++
++.PHONY:		filesinstall
++realinstall:	filesinstall
++
++.if defined(FILES) && !empty(FILES)
++FILESDIR?=${BINDIR}
++FILESOWN?=${BINOWN}
++FILESGRP?=${BINGRP}
++FILESMODE?=${NONBINMODE}
++.for F in ${FILES}
++FILESDIR_${F}?=${FILESDIR}
++FILESOWN_${F}?=${FILESOWN}
++FILESGRP_${F}?=${FILESGRP}
++FILESMODE_${F}?=${FILESMODE}
++.if defined(FILESNAME)
++FILESNAME_${F} ?= ${FILESNAME}
++.else
++FILESNAME_${F} ?= ${F:T}
++.endif
++filesinstall:: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}
++${DESTDIR}${FILESDIR_${F}}/${FILESNAME_${F}}: ${F}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${FILESOWN_${F}} \
++		-g ${FILESGRP_${F}} -m ${FILESMODE_${F}} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(filesinstall)
++filesinstall::
++.endif
++
++FILES:=
+--- pmake-1.111.orig/mk/bsd.inc.mk
++++ pmake-1.111/mk/bsd.inc.mk
+@@ -0,0 +1,25 @@
++#	$NetBSD: bsd.inc.mk,v 1.12 1999/02/04 11:58:30 christos Exp $
++
++.PHONY:		incinstall
++includes:	${INCS} incinstall
++
++.if defined(INCS)
++.for I in ${INCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: $I
++	@cmp -s ${.ALLSRC} ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} ${.ALLSRC} ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} ${.ALLSRC} ${.TARGET})
++.endfor
++.endif
++
++.if !target(incinstall)
++incinstall::
++.endif
+--- pmake-1.111.orig/mk/bsd.info.mk
++++ pmake-1.111/mk/bsd.info.mk
+@@ -0,0 +1,60 @@
++#	$NetBSD: bsd.info.mk,v 1.7.2.1 1999/04/22 14:46:13 perry Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++MAKEINFO?=	makeinfo
++INFOFLAGS?=	
++INSTALL_INFO?=	install-info
++
++.SUFFIXES: .txi .texi .texinfo .info
++
++.txi.info .texi.info .texinfo.info:
++	@${MAKEINFO} ${INFOFLAGS} --no-split -o $@ $<
++
++.if defined(TEXINFO) && !empty(TEXINFO) && ${MKINFO} != "no"
++INFOFILES=	${TEXINFO:C/\.te?xi(nfo)?$/.info/}
++FILES+=		${INFOFILES}
++
++infoinstall:
++.for F in ${INFOFILES}
++	@${INSTALL_INFO} --remove --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
++	${INSTALL_INFO} --info-dir=${DESTDIR}${INFODIR} ${DESTDIR}${INFODIR}/${F}
++.endfor
++
++.for F in ${INFOFILES}
++FILESDIR_${F}=	${INFODIR}
++FILESOWN_${F}=	${INFOOWN}
++FILESGRP_${F}=	${INFOGRP}
++FILESMODE_${F}=	${INFOMODE}
++FILESNAME_${F}=	${F:T}
++.endfor
++
++all: ${INFOFILES}
++.else
++all:
++.endif
++
++.if ${MKINFO} != "no"
++cleaninfo:
++	rm -f ${INFOFILES}
++.else
++cleaninfo infoinstall:
++.endif
++
++.include <bsd.files.mk>
++
++# These need to happen *after* filesinstall.
++.PHONY: infoinstall cleaninfo
++realinstall: infoinstall
++cleandir distclean: cleaninfo
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++clean depend includes lint regress tags:
+--- pmake-1.111.orig/mk/bsd.kinc.mk
++++ pmake-1.111/mk/bsd.kinc.mk
+@@ -0,0 +1,136 @@
++#	$NetBSD: bsd.kinc.mk,v 1.5 1999/02/04 11:58:30 christos Exp $
++
++# System configuration variables:
++#
++# SYS_INCLUDE	"symlinks": symlinks to include directories are created.
++#		This may not work 100% properly for all headers.
++#
++#		"copies": directories are made, if necessary, and headers
++#		are installed into them.
++#
++# Variables:
++#
++# INCSDIR	Directory to install includes into (and/or make, and/or
++#		symlink, depending on what's going on).
++#
++# KDIR		Kernel directory to symlink to, if SYS_INCLUDE is symlinks.
++#		If unspecified, no action will be taken when making include
++#		for the directory if SYS_INCLUDE is symlinks.
++#
++# INCS		Headers to install, if SYS_INCLUDE is copies.
++#
++# DEPINCS	Headers to install which are built dynamically.
++#
++# SUBDIR	Subdirectories to enter
++#
++# SYMLINKS	Symlinks to make (unconditionally), a la bsd.links.mk.
++#		Note that the original bits will be 'rm -rf'd rather than
++#		just 'rm -f'd, to make the right thing happen with include
++#		directories.
++#
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++# Change SYS_INCLUDE in bsd.own.mk or /etc/mk.conf to "symlinks" if you
++# don't want copies
++SYS_INCLUDE?=   copies
++
++# If DESTDIR is set, we're probably building a release, so force "copies".
++.if defined(DESTDIR) && (${DESTDIR} != "/" && !empty(DESTDIR))
++SYS_INCLUDE=    copies
++.endif
++
++
++.PHONY:		incinstall
++includes:	${INCS} incinstall
++
++
++.if ${SYS_INCLUDE} == "symlinks"
++
++# don't install includes, just make symlinks.
++
++.if defined(KDIR)
++SYMLINKS+=	${KDIR} ${INCSDIR}
++.endif
++
++.else # not symlinks
++
++# make sure the directory is OK, and install includes.
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}
++.PHONY: ${DESTDIR}${INCSDIR}
++${DESTDIR}${INCSDIR}:
++	@if [ ! -d ${.TARGET} ] || [ -L ${.TARGET} ] ; then \
++		echo creating ${.TARGET}; \
++		/bin/rm -rf ${.TARGET}; \
++		${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m 755 ${.TARGET}; \
++	fi
++
++incinstall:: ${DESTDIR}${INCSDIR}
++
++.if defined(INCS)
++.for I in ${INCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
++	@cmp -s ${.CURDIR}/$I ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} ${.CURDIR}/$I ${.TARGET})
++.endfor
++.endif
++
++.if defined(DEPINCS)
++.for I in ${DEPINCS}
++incinstall:: ${DESTDIR}${INCSDIR}/$I
++
++.PRECIOUS: ${DESTDIR}${INCSDIR}/$I
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${INCSDIR}/$I
++.endif
++${DESTDIR}${INCSDIR}/$I: ${DESTDIR}${INCSDIR} $I 
++	@cmp -s $I ${.TARGET} > /dev/null 2>&1 || \
++	    (echo "${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} \
++		-g ${BINGRP} -m ${NONBINMODE} $I ${.TARGET}" && \
++	     ${INSTALL} ${RENAME} ${PRESERVE} -c -o ${BINOWN} -g ${BINGRP} \
++		-m ${NONBINMODE} $I ${.TARGET})
++.endfor
++.endif
++
++.endif # not symlinks
++
++.if defined(SYMLINKS) && !empty(SYMLINKS)
++incinstall::
++	@set ${SYMLINKS}; \
++	 while test $$# -ge 2; do \
++		l=$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -rf $$t"; \
++		echo "	@ln -s $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++
++.if !target(incinstall)
++incinstall::
++.endif
++
++.include <bsd.subdir.mk>
+--- pmake-1.111.orig/mk/bsd.kmod.mk
++++ pmake-1.111/mk/bsd.kmod.mk
+@@ -0,0 +1,95 @@
++#	$NetBSD: bsd.kmod.mk,v 1.30 1999/03/10 06:34:19 ross Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleankmod kmodinstall load unload
++realinstall:	kmodinstall
++clean cleandir distclean: cleankmod
++
++S?=		/sys
++KERN=		$S/kern
++
++CFLAGS+=	${COPTS} -D_KERNEL -D_LKM -I. -I${.CURDIR} -I$S -I$S/arch
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++
++.if !defined(PROG)
++PROG=	${KMOD}.o
++.endif
++
++${PROG}: ${DPSRCS} ${OBJS} ${DPADD}
++	${LD} -r ${LDFLAGS} -o tmp.o ${OBJS}
++	mv tmp.o ${.TARGET}
++
++.if	!defined(MAN)
++MAN=	${KMOD}.4
++.endif
++
++all: machine-links ${PROG}
++
++.PHONY:	machine-links
++beforedepend: machine-links
++machine-links:
++	-rm -f machine && \
++	    ln -s $S/arch/${MACHINE}/include machine
++	-rm -f ${MACHINE_ARCH} && \
++	    ln -s $S/arch/${MACHINE_ARCH}/include ${MACHINE_ARCH}
++CLEANFILES+=machine ${MACHINE_ARCH}
++
++cleankmod:
++	rm -f a.out [Ee]rrs mklog core *.core \
++		${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
++
++#
++# define various install targets
++#
++.if !target(kmodinstall)
++kmodinstall:: ${DESTDIR}${KMODDIR}/${PROG}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${KMODDIR}/${PROG}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${KMODDIR}/${PROG}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${KMODDIR}/${PROG}
++${DESTDIR}${KMODDIR}/${PROG}: ${PROG}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${KMODOWN} -g ${KMODGRP} \
++		-m ${KMODMODE} ${.ALLSRC} ${.TARGET}
++.endif
++
++lint: ${LOBJS}
++.if defined(LOBJS) && !empty(LOBJS)
++	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
++.endif
++
++.if !target(load)
++load:	${PROG}
++	/sbin/modload -o ${KMOD} -e${KMOD}_lkmentry ${PROG}
++.endif
++
++.if !target(unload)
++unload: ${PROG}
++	/sbin/modunload -n ${KMOD}
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++.-include "machine/Makefile.inc"
+--- pmake-1.111.orig/mk/bsd.lib.mk
++++ pmake-1.111/mk/bsd.lib.mk
+@@ -0,0 +1,396 @@
++#	$NetBSD: bsd.lib.mk,v 1.152 1999/03/30 09:30:43 fair Exp $
++#	@(#)bsd.lib.mk	8.3 (Berkeley) 4/22/94
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		checkver cleanlib libinstall
++realinstall:	checkver libinstall
++clean cleandir distclean: cleanlib
++
++.if exists(${.CURDIR}/shlib_version)
++SHLIB_MAJOR != . ${.CURDIR}/shlib_version ; echo $$major
++SHLIB_MINOR != . ${.CURDIR}/shlib_version ; echo $$minor
++
++# Check for higher installed library versions.
++.if !defined(NOCHECKVER) && !defined(NOCHECKVER_${LIB}) && \
++	exists(${BSDSRCDIR}/lib/checkver)
++checkver:
++	@(cd ${.CURDIR} && \
++		${BSDSRCDIR}/lib/checkver -d ${DESTDIR}${LIBDIR} ${LIB})
++.else
++checkver:
++.endif
++.else
++checkver:
++.endif
++
++# add additional suffixes not exported.
++# .po is used for profiling object files.
++# .so is used for PIC object files.
++.SUFFIXES: .out .a .ln .so .po .o .s .S .c .cc .C .m .F .f .r .y .l .cl .p .h
++.SUFFIXES: .sh .m4 .m
++
++
++# Set PICFLAGS to cc flags for producing position-independent code,
++# if not already set.  Includes -DPIC, if required.
++
++# Data-driven table using make variables to control  how shared libraries
++# are built for different platforms and object formats.
++# OBJECT_FMT:		currently either "ELF" or "a.out", from <bsd.own.mk>
++# SHLIB_SOVERSION:  	version number to be compiled into a shared library
++#                    	via -soname. Usualy ${SHLIB_MAJOR} on ELF.
++#   			NetBSD/pmax used to use ${SHLIB_MAJOR}.{SHLIB-MINOR}.
++# SHLIB_SHFLAGS:	Flags to tell ${LD} to emit  shared library.
++#			with ELF, also set shared-lib version for ld.so.
++# SHLIB_LDSTARTFILE:	support .o file, call C++ file-level constructors
++# SHLIB_LDENDFILE:	support .o file, call C++ file-level destructors
++# CPPICFLAGS:	flags for ${CPP} to preprocess  .[sS]  files for ${AS}
++# CPICFLAGS:	flags for ${CC} to compile  .[cC] files to .so objects.
++# CAPICFLAGS	flags for {$CC} to compiling .[Ss] files
++#		 	(usually just ${CPPPICFLAGS} ${CPICFLAGS})
++# APICFLAGS:	flags for ${AS} to assemble .[sS]  to .so objects.
++
++.if ${MACHINE_ARCH} == "alpha"
++		# Alpha-specific shared library flags
++CPICFLAGS ?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?=
++.elif ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb"
++		# mips-specific shared library flags
++
++# On mips, all libs need to be compiled with ABIcalls, not just sharedlibs.
++CPICFLAGS?=
++APICFLAGS?=
++#CPICFLAGS?= -fpic -DPIC
++#APICFLAGS?= -DPIC
++
++# so turn shlib PIC flags on for ${CPP}, ${CC}, and ${AS} as follows:
++AINC+=-DPIC -DABICALLS
++COPTS+=	-fPIC ${AINC}
++AFLAGS+= -fPIC
++AS+=	-KPIC
++
++.elif ${MACHINE_ARCH} == "sparc" && ${OBJECT_FMT} == "ELF"
++
++CPICFLAGS ?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?= -KPIC
++
++.elif (${MACHINE} == "debian")
++
++SHLIB_TYPE=ELF
++SHLIB_LDSTARTFILE=
++SHLIB_LDENDFILE=
++SHLIB_SOVERSION=${SHLIB_MAJOR}
++CPICFLAGS ?= -fPIC -DPIC
++CPPPICFLAGS?= -DPIC
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS ?=
++
++.else
++
++# Platform-independent flags for NetBSD a.out shared libraries (and PowerPC)
++SHLIB_LDSTARTFILE=
++SHLIB_LDENDFILE=
++SHLIB_SHFLAGS=
++SHLIB_SOVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR}
++CPICFLAGS?= -fpic -DPIC
++CPPPICFLAGS?= -DPIC 
++CAPICFLAGS?= ${CPPPICFLAGS} ${CPICFLAGS}
++APICFLAGS?= -k
++
++.endif
++
++# Platform-independent linker flags for ELF shared libraries
++.if ${OBJECT_FMT} == "ELF"
++SHLIB_SOVERSION=${SHLIB_MAJOR}
++SHLIB_SHFLAGS=-soname lib${LIB}.so.${SHLIB_SOVERSION}
++SHLIB_LDSTARTFILE= ${DESTDIR}/usr/lib/crtbeginS.o
++SHLIB_LDENDFILE= ${DESTDIR}/usr/lib/crtendS.o
++.endif
++
++CFLAGS+=	${COPTS}
++
++.c.o:
++	@echo ${COMPILE.c:Q} ${.IMPSRC}
++	@${COMPILE.c} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.po:
++	@echo ${COMPILE.c:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.c} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.so:
++	@echo ${COMPILE.c:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.c} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.c.ln:
++	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
++
++.cc.o .C.o:
++	@echo ${COMPILE.cc:Q} ${.IMPSRC}
++	@${COMPILE.cc} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.cc.po .C.po:
++	@echo ${COMPILE.cc:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.cc} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.cc.so .C.so:
++	@echo ${COMPILE.cc:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.cc} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.o:
++	@echo ${COMPILE.m:Q} ${.IMPSRC}
++	@${COMPILE.m} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.po:
++	@echo ${COMPILE.m:Q} -pg ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.m} -pg ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.m.so:
++	@echo ${COMPILE.m:Q} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.m} ${CPICFLAGS} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.o .s.o:
++	@echo ${COMPILE.S:Q} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC}
++	@${COMPILE.S} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.po .s.po:
++	@echo ${COMPILE.S:Q} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.S} -DGPROF -DPROF ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -X -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.S.so .s.so:
++	@echo ${COMPILE.S:Q} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}
++	@${COMPILE.S} ${CAPICFLAGS} ${CFLAGS:M-[ID]*} ${AINC} ${.IMPSRC} -o ${.TARGET}.o
++	@${LD} -x -r ${.TARGET}.o -o ${.TARGET}
++	@rm -f ${.TARGET}.o
++
++.if ${MKPIC} == "no" || (defined(LDSTATIC) && ${LDSTATIC} != "") \
++	|| ${MKLINKLIB} != "no"
++_LIBS=lib${LIB}.a
++.else
++_LIBS=
++.endif
++
++.if ${MKPROFILE} != "no"
++_LIBS+=lib${LIB}_p.a
++.endif
++
++.if ${MKPIC} != "no"
++_LIBS+=lib${LIB}_pic.a
++.if defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
++_LIBS+=lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.endif
++.endif
++
++.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
++_LIBS+=llib-l${LIB}.ln
++.endif
++
++all: ${SRCS} ${_LIBS}
++
++__archivebuild: .USE
++	@rm -f ${.TARGET}
++	@${AR} cq ${.TARGET} `NM=${NM} ${LORDER} ${.ALLSRC:M*o} | ${TSORT}`
++	${RANLIB} ${.TARGET}
++
++__archiveinstall: .USE
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m 600 ${.ALLSRC} ${.TARGET}
++	${RANLIB} -t ${.TARGET}
++	chmod ${LIBMODE} ${.TARGET}
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++lib${LIB}.a:: ${OBJS} __archivebuild
++	@echo building standard ${LIB} library
++
++POBJS+=		${OBJS:.o=.po}
++lib${LIB}_p.a:: ${POBJS} __archivebuild
++	@echo building profiled ${LIB} library
++
++SOBJS+=		${OBJS:.o=.so}
++lib${LIB}_pic.a:: ${SOBJS} __archivebuild
++	@echo building shared object ${LIB} library
++
++lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}_pic.a ${DPADD} \
++    ${SHLIB_LDSTARTFILE} ${SHLIB_LDENDFILE}
++	@echo building shared ${LIB} library \(version ${SHLIB_MAJOR}.${SHLIB_MINOR}\)
++	@rm -f lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.if defined(DESTDIR)
++	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
++	    ${SHLIB_LDSTARTFILE} \
++	    -Wl,--whole-archive lib${LIB}_pic.a \
++	    -nostdlib -L${DESTDIR}${LIBDIR} -R${LIBDIR} \
++	    -Wl,--no-whole-archive ${LDADD} \
++	    ${SHLIB_LDENDFILE}
++.else
++	$(CC) -shared ${SHLIB_SHFLAGS} -o ${.TARGET} \
++	    ${SHLIB_LDSTARTFILE} \
++	    -Wl,--whole-archive lib${LIB}_pic.a -Wl,--no-whole-archive ${LDADD} \
++	    ${SHLIB_LDENDFILE}
++.endif
++.if ${OBJECT_FMT} == "ELF"
++	rm -f lib${LIB}.so.${SHLIB_MAJOR}
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    lib${LIB}.so.${SHLIB_MAJOR}
++	rm -f lib${LIB}.so
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    lib${LIB}.so
++.endif
++
++LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
++LLIBS?=		-lc
++llib-l${LIB}.ln: ${LOBJS}
++	@echo building llib-l${LIB}.ln
++	@rm -f llib-l${LIB}.ln
++	@${LINT} -C${LIB} ${.ALLSRC} ${LLIBS}
++
++cleanlib:
++	rm -f a.out [Ee]rrs mklog core *.core ${CLEANFILES}
++	rm -f lib${LIB}.a ${OBJS}
++	rm -f lib${LIB}_p.a ${POBJS}
++	rm -f lib${LIB}_pic.a lib${LIB}.so.* lib${LIB}.so ${SOBJS}
++	rm -f llib-l${LIB}.ln ${LOBJS}
++
++.if defined(SRCS)
++afterdepend: .depend
++	@(TMP=/tmp/_depend$$$$; \
++	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.po \1.so \1.ln:/' \
++	      < .depend > $$TMP; \
++	    mv $$TMP .depend)
++.endif
++
++.if !target(libinstall)
++# Make sure it gets defined, in case MKPIC==no && MKLINKLIB==no
++libinstall::
++
++.if ${MKLINKLIB} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.a
++${DESTDIR}${LIBDIR}/lib${LIB}.a: lib${LIB}.a __archiveinstall
++.endif
++
++.if ${MKPROFILE} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}_p.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_p.a
++${DESTDIR}${LIBDIR}/lib${LIB}_p.a: lib${LIB}_p.a __archiveinstall
++.endif
++
++.if ${MKPIC} != "no" && ${MKPICINSTALL} != "no"
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}_pic.a
++${DESTDIR}${LIBDIR}/lib${LIB}_pic.a: lib${LIB}_pic.a __archiveinstall
++.endif
++
++.if ${MKPIC} != "no" && defined(SHLIB_MAJOR) && defined(SHLIB_MINOR)
++libinstall:: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}: lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m ${LIBMODE} ${.ALLSRC} ${.TARGET}
++.if ${OBJECT_FMT} == "a.out" && !defined(DESTDIR)
++	/sbin/ldconfig -m ${LIBDIR}
++.endif
++.if ${OBJECT_FMT} == "ELF"
++	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    ${DESTDIR}${LIBDIR}/lib${LIB}.so.${SHLIB_MAJOR}
++	rm -f ${DESTDIR}${LIBDIR}/lib${LIB}.so
++.if ${MKLINKLIB} != "no"
++	ln -s lib${LIB}.so.${SHLIB_MAJOR}.${SHLIB_MINOR} \
++	    ${DESTDIR}${LIBDIR}/lib${LIB}.so
++.endif
++.endif
++.endif
++
++.if ${MKLINT} != "no" && ${MKLINKLIB} != "no"
++libinstall:: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++.endif
++.if !defined(BUILD)
++${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln
++${DESTDIR}${LINTLIBDIR}/llib-l${LIB}.ln: llib-l${LIB}.ln
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${LIBOWN} -g ${LIBGRP} \
++		-m ${LIBMODE} ${.ALLSRC} ${DESTDIR}${LINTLIBDIR}
++.endif
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.nls.mk>
++.include <bsd.files.mk>
++.include <bsd.inc.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++lint regress:
+--- pmake-1.111.orig/mk/bsd.links.mk
++++ pmake-1.111/mk/bsd.links.mk
+@@ -0,0 +1,43 @@
++#	$NetBSD: bsd.links.mk,v 1.8 1998/12/31 15:28:52 castor Exp $
++
++.PHONY:		linksinstall
++realinstall:	linksinstall
++
++.if defined(SYMLINKS) && !empty(SYMLINKS)
++linksinstall::
++	@set ${SYMLINKS}; \
++	 while test $$# -ge 2; do \
++		l=$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -f $$t"; \
++		echo "	@ln -s $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++.if defined(LINKS) && !empty(LINKS)
++linksinstall::
++	@set ${LINKS}; \
++	 while test $$# -ge 2; do \
++		l=${DESTDIR}$$1; \
++		shift; \
++		t=${DESTDIR}$$1; \
++		shift; \
++		echo ".include <bsd.own.mk>"; \
++		echo "all:: $$t"; \
++		echo ".PHONY: $$t"; \
++		echo "$$t:"; \
++		echo "	@echo \"$$t -> $$l\""; \
++		echo "	@rm -f $$t"; \
++		echo "	@ln $$l $$t"; \
++	done | ${MAKE} -f-
++.endif
++
++.if !target(linksinstall)
++linksinstall:
++.endif
+--- pmake-1.111.orig/mk/bsd.man.mk
++++ pmake-1.111/mk/bsd.man.mk
+@@ -0,0 +1,156 @@
++#	$NetBSD: bsd.man.mk,v 1.45 1999/02/13 16:34:39 christos Exp $
++#	@(#)bsd.man.mk	8.1 (Berkeley) 6/8/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		catinstall maninstall catpages manpages catlinks manlinks cleanman
++.if ${MKMAN} != "no"
++realinstall:	${MANINSTALL}
++.endif
++cleandir distclean: cleanman
++
++MANTARGET?=	cat
++NROFF?=		nroff
++TBL?=		tbl
++
++.SUFFIXES: .1 .2 .3 .4 .5 .6 .7 .8 .9 \
++	   .cat1 .cat2 .cat3 .cat4 .cat5 .cat6 .cat7 .cat8 .cat9
++
++.9.cat9 .8.cat8 .7.cat7 .6.cat6 .5.cat5 .4.cat4 .3.cat3 .2.cat2 .1.cat1:
++.if !defined(USETBL)
++	@echo "${NROFF} -mandoc ${.IMPSRC} > ${.TARGET}"
++	@${NROFF} -mandoc ${.IMPSRC} > ${.TARGET} || \
++	 (rm -f ${.TARGET}; false)
++.else
++	@echo "${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET}"
++	@${TBL} ${.IMPSRC} | ${NROFF} -mandoc > ${.TARGET} || \
++	 (rm -f ${.TARGET}; false)
++.endif
++
++.if defined(MAN) && !empty(MAN)
++MANPAGES=	${MAN}
++CATPAGES=	${MANPAGES:C/(.*).([1-9])/\1.cat\2/}
++.endif
++
++MINSTALL=	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${MANOWN} \
++			-g ${MANGRP} -m ${MANMODE}
++
++.if defined(MANZ)
++# chown and chmod are done afterward automatically
++MCOMPRESS=	gzip -9cf
++MCOMPRESSSUFFIX= .gz
++.endif
++
++catinstall: catlinks
++maninstall: manlinks
++
++__installpage: .USE
++.if defined(MCOMPRESS) && !empty(MCOMPRESS)
++	@rm -f ${.TARGET}
++	${MCOMPRESS} ${.ALLSRC} > ${.TARGET}
++	@chown ${MANOWN}:${MANGRP} ${.TARGET}
++	@chmod ${MANMODE} ${.TARGET}
++.else
++	${MINSTALL} ${.ALLSRC} ${.TARGET}
++.endif
++
++
++# Rules for cat'ed man page installation
++.if defined(CATPAGES) && !empty(CATPAGES) && ${MKCATPAGES} != "no"
++.   for P in ${CATPAGES}
++catpages:: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++
++.	if !defined(UPDATE)
++.PHONY: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++.	endif
++.	if !defined(BUILD)
++${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: .MADE
++.	endif
++
++.PRECIOUS: ${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}
++${DESTDIR}${MANDIR}/${P:T:E}${MANSUBDIR}/${P:T:R}.0${MCOMPRESSSUFFIX}: ${P} __installpage
++.   endfor
++.else
++catpages::
++.endif
++
++# Rules for source page installation
++.if defined(MANPAGES) && !empty(MANPAGES)
++.   for P in ${MANPAGES}
++manpages:: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++.	if !defined(UPDATE)
++.PHONY: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++.	endif
++
++.PRECIOUS: ${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}
++${DESTDIR}${MANDIR}/man${P:T:E}${MANSUBDIR}/${P}${MCOMPRESSSUFFIX}: ${P} __installpage
++.   endfor
++.else
++manpages::
++.endif
++
++.if ${MKCATPAGES} != "no"
++catlinks: catpages
++.if defined(MLINKS) && !empty(MLINKS)
++	@set ${MLINKS}; \
++	while test $$# -ge 2; do \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
++		l=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/cat$${name##*.}; \
++		t=$${dir}${MANSUBDIR}/$${name%.*}.0${MCOMPRESSSUFFIX}; \
++		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
++		    echo $$t -\> $$l; \
++		    ln -sf $$l $$t; \
++		fi; \
++	done
++.endif
++.else
++catlinks:
++.endif
++
++manlinks: manpages
++.if defined(MLINKS) && !empty(MLINKS)
++	@set ${MLINKS}; \
++	while test $$# -ge 2; do \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
++		l=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
++		name=$$1; \
++		shift; \
++		dir=${DESTDIR}${MANDIR}/man$${name##*.}; \
++		t=$${dir}${MANSUBDIR}/$${name}${MCOMPRESSSUFFIX}; \
++		if [ -z "${UPDATE}" -o ! -f $$t ]; then \
++		    echo $$t -\> $$l; \
++		    ln -sf $$l $$t; \
++		fi; \
++	done
++.endif
++
++.if defined(CATPAGES)
++.if ${MKCATPAGES} != "no" && ${MKMAN} != "no"
++all: ${CATPAGES}
++.else
++all:
++.endif
++
++cleanman:
++	rm -f ${CATPAGES}
++.else
++cleanman:
++.endif
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++clean depend includes lint regress tags:
+--- pmake-1.111.orig/mk/bsd.nls.mk
++++ pmake-1.111/mk/bsd.nls.mk
+@@ -0,0 +1,64 @@
++#	$NetBSD: bsd.nls.mk,v 1.17 1999/02/12 12:38:45 lukem Exp $
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++
++.MAIN:		all
++.endif
++.PHONY:		cleannls nlsinstall
++.if ${MKNLS} != "no"
++realinstall:	nlsinstall
++.endif
++cleandir distclean: cleannls
++
++.SUFFIXES: .cat .msg
++
++.msg.cat:
++	@rm -f ${.TARGET}
++	gencat ${.TARGET} ${.IMPSRC}
++
++.if defined(NLS) && !empty(NLS)
++NLSALL= ${NLS:.msg=.cat}
++.endif
++
++.if !defined(NLSNAME)
++.if defined(PROG)
++NLSNAME=${PROG}
++.else
++NLSNAME=lib${LIB}
++.endif
++.endif
++
++.if defined(NLSALL)
++.if ${MKNLS} != "no"
++all: ${NLSALL}
++.endif
++
++cleannls:
++	rm -f ${NLSALL}
++
++.for F in ${NLSALL}
++nlsinstall:: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++.endif
++.if !defined(BUILD)
++${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat
++${DESTDIR}${NLSDIR}/${F:T:R}/${NLSNAME}.cat: ${F}
++	${INSTALL} -d ${.TARGET:H}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${NLSOWN} -g ${NLSGRP} \
++		-m ${NLSMODE} ${.ALLSRC} ${.TARGET}
++.endfor
++.else
++cleannls:
++.endif
++
++.if !target(nlsinstall)
++nlsinstall::
++.endif
+--- pmake-1.111.orig/mk/bsd.obj.mk
++++ pmake-1.111/mk/bsd.obj.mk
+@@ -0,0 +1,54 @@
++#	$NetBSD: bsd.obj.mk,v 1.17 1999/02/12 04:13:26 lukem Exp $
++
++.if !target(__initialized_obj__)
++__initialized_obj__:
++.include <bsd.own.mk>
++.endif
++
++.if ${MKOBJ} == "no"
++obj:
++.else
++
++.if defined(OBJMACHINE)
++__objdir=	obj.${MACHINE}
++.else
++__objdir=	obj
++.endif
++
++.if defined(USR_OBJMACHINE)
++__usrobjdir=	${BSDOBJDIR}.${MACHINE}
++__usrobjdirpf=	
++.else
++__usrobjdir=	${BSDOBJDIR}
++.if defined(OBJMACHINE)
++__usrobjdirpf=	.${MACHINE}
++.else
++__usrobjdirpf=
++.endif
++.endif
++
++obj:
++	@cd ${.CURDIR}; rm -f ${__objdir} > /dev/null 2>&1 || true; \
++	here=`/bin/pwd`; subdir=$${here#${BSDSRCDIR}/}; \
++	if test $$here != $$subdir ; then \
++		dest=${__usrobjdir}/$$subdir${__usrobjdirpf} ; \
++		echo "$$here/${__objdir} -> $$dest"; \
++		rm -rf ${__objdir}; \
++		ln -s $$dest ${__objdir}; \
++		if test -d ${__usrobjdir} -a ! -d $$dest; then \
++			mkdir -p $$dest; \
++		else \
++			true; \
++		fi; \
++	else \
++		true ; \
++		dest=$$here/${__objdir} ; \
++		if test ! -d ${__objdir} ; then \
++			echo "making $$dest" ; \
++			mkdir $$dest; \
++		fi ; \
++	fi;
++.endif
++
++print-objdir:
++	@echo ${.OBJDIR}
+--- pmake-1.111.orig/mk/bsd.own.mk
++++ pmake-1.111/mk/bsd.own.mk
+@@ -0,0 +1,245 @@
++#	$NetBSD: bsd.own.mk,v 1.120 1999/02/24 14:42:36 drochner Exp $
++
++.if !defined(_BSD_OWN_MK_)
++_BSD_OWN_MK_=1
++
++.if defined(MAKECONF) && exists(${MAKECONF})
++.include "${MAKECONF}"
++.elif exists(/etc/mk.conf)
++.include "/etc/mk.conf"
++.endif
++
++# Defining `SKEY' causes support for S/key authentication to be compiled in.
++SKEY=		yes
++# Defining `KERBEROS' causes support for Kerberos authentication to be
++# compiled in.
++#KERBEROS=	yes
++# Defining 'KERBEROS5' causes support for Kerberos5 authentication to be
++# compiled in.
++#KERBEROS5=	yes
++
++# where the system object and source trees are kept; can be configurable
++# by the user in case they want them in ~/foosrc and ~/fooobj, for example
++BSDSRCDIR?=	/usr/src
++BSDOBJDIR?=	/usr/obj
++
++BINGRP?=	root
++BINOWN?=	root
++BINMODE?=	755
++NONBINMODE?=	644
++
++# Define MANZ to have the man pages compressed (gzip)
++MANZ=		1
++
++MANDIR?=	/usr/share/man
++MANGRP?=	root
++MANOWN?=	root
++MANMODE?=	${NONBINMODE}
++MANINSTALL?=	maninstall catinstall
++
++INFODIR?=	/usr/share/info
++INFOGRP?=	root
++INFOOWN?=	root
++INFOMODE?=	${NONBINMODE}
++
++LIBDIR?=	/usr/lib
++LINTLIBDIR?=	/usr/libdata/lint
++LIBGRP?=	${BINGRP}
++LIBOWN?=	${BINOWN}
++LIBMODE?=	${NONBINMODE}
++
++DOCDIR?=        /usr/share/doc
++DOCGRP?=	root
++DOCOWN?=	root
++DOCMODE?=       ${NONBINMODE}
++
++NLSDIR?=	/usr/share/nls
++NLSGRP?=	root
++NLSOWN?=	root
++NLSMODE?=	${NONBINMODE}
++
++KMODDIR?=	/usr/lkm
++KMODGRP?=	root
++KMODOWN?=	root
++KMODMODE?=	${NONBINMODE}
++
++COPY?=		-c
++.if defined(UPDATE)
++PRESERVE?=	-p
++.else
++PRESERVE?=
++.endif
++RENAME?=
++STRIPFLAG?=	-s
++
++# Define SYS_INCLUDE to indicate whether you want symbolic links to the system
++# source (``symlinks''), or a separate copy (``copies''); (latter useful
++# in environments where it's not possible to keep /sys publicly readable)
++#SYS_INCLUDE= 	symlinks
++
++# XXX The next two are temporary until the transition to UVM is complete.
++
++# Systems on which UVM is the standard VM system.
++.if ${MACHINE} != "pica"
++UVM?=		yes
++.endif
++
++# Systems that use UVM's new pmap interface.
++.if ${MACHINE} == "alpha" || \
++    ${MACHINE} == "i386" || \
++    ${MACHINE} == "pc532" || \
++    ${MACHINE} == "vax"
++PMAP_NEW?=	yes
++.endif
++
++# Data-driven table using make variables to control how 
++# toolchain-dependent targets and shared libraries are built
++# for different platforms and object formats.
++# OBJECT_FMT:		currently either "ELF" or "a.out".
++# SHLIB_TYPE:		"ELF" or "a.out" or "" to force static libraries.
++#
++#.if ${MACHINE_ARCH} == "alpha" || \
++#    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
++#    ${MACHINE_ARCH} == "powerpc" || \
++#    ${MACHINE_ARCH} == "sparc64"
++#OBJECT_FMT?=ELF
++#.else
++
++# On Debian GNU/Linux, Everything is ELF.
++OBJECT_FMT?=a.out
++#.endif
++
++# GNU sources and packages sometimes see architecture names differently.
++# This table maps an architecture name to its GNU counterpart.
++# Use as so:  ${GNU_ARCH.${TARGET_ARCH}} or ${MACHINE_GNU_ARCH}
++GNU_ARCH.alpha=alpha
++GNU_ARCH.arm32=arm
++GNU_ARCH.i386=i386
++GNU_ARCH.m68k=m68k
++GNU_ARCH.mipseb=mipseb
++GNU_ARCH.mipsel=mipsel
++GNU_ARCH.ns32k=ns32k
++GNU_ARCH.powerpc=powerpc
++GNU_ARCH.sparc=sparc
++GNU_ARCH.sparc64=sparc
++GNU_ARCH.vax=vax
++.if ${MACHINE_ARCH} == "mips"
++.INIT:
++	@echo Must set MACHINE_ARCH to one of mipseb or mipsel
++	@false
++.endif
++
++.if ${MACHINE_ARCH} == "sparc64"
++MACHINE_GNU_ARCH=${MACHINE_ARCH}
++.else
++MACHINE_GNU_ARCH=${GNU_ARCH.${MACHINE_ARCH}}
++.endif
++
++TARGETS+=	all clean cleandir depend distclean includes install lint obj \
++		regress tags
++.PHONY:		all clean cleandir depend distclean includes install lint obj \
++		regress tags beforedepend afterdepend beforeinstall \
++		afterinstall realinstall
++
++# set NEED_OWN_INSTALL_TARGET, if it's not already set, to yes
++# this is used by bsd.pkg.mk to stop "install" being defined
++NEED_OWN_INSTALL_TARGET?=	yes
++
++.if ${NEED_OWN_INSTALL_TARGET} == "yes"
++.if !target(install)
++install:	.NOTMAIN beforeinstall subdir-install realinstall afterinstall
++beforeinstall:	.NOTMAIN
++subdir-install:	.NOTMAIN beforeinstall
++realinstall:	.NOTMAIN beforeinstall
++afterinstall:	.NOTMAIN subdir-install realinstall
++.endif
++.endif
++
++# Define MKxxx variables (which are either yes or no) for users
++# to set in /etc/mk.conf and override on the make commandline.
++# These should be tested with `== "no"' or `!= "no"'.
++# The NOxxx variables should only be used by Makefiles.
++#
++
++MKCATPAGES?=no
++
++.if defined(NODOC)
++MKDOC=no
++#.elif !defined(MKDOC)
++#MKDOC=yes
++.else
++MKDOC?=yes
++.endif
++
++MKINFO?=yes
++
++.if defined(NOLINKLIB)
++MKLINKLIB=no
++.else
++MKLINKLIB?=yes
++.endif
++.if ${MKLINKLIB} == "no"
++MKPICINSTALL=no
++MKPROFILE=no
++.endif
++
++.if defined(NOLINT)
++MKLINT=no
++.else
++MKLINT?=yes
++.endif
++
++.if defined(NOMAN)
++MKMAN=no
++.else
++MKMAN?=yes
++.endif
++.if ${MKMAN} == "no"
++MKCATPAGES=no
++.endif
++
++.if defined(NONLS)
++MKNLS=no
++.else
++MKNLS?=yes
++.endif
++
++.if defined(NOOBJ)
++MKOBJ=no
++.else
++MKOBJ?=yes
++.endif
++
++.if defined(NOPIC)
++MKPIC=no
++.else
++MKPIC?=yes
++.endif
++
++.if defined(NOPICINSTALL)
++MKPICINSTALL=no
++.else
++MKPICINSTALL?=yes
++.endif
++
++.if defined(NOPROFILE)
++MKPROFILE=no
++.else
++MKPROFILE?=yes
++.endif
++
++.if defined(NOSHARE)
++MKSHARE=no
++.else
++MKSHARE?=yes
++.endif
++.if ${MKSHARE} == "no"
++MKCATPAGES=no
++MKDOC=no
++MKINFO=no
++MKMAN=no
++MKNLS=no
++.endif
++
++
++.endif		# _BSD_OWN_MK_
+--- pmake-1.111.orig/mk/bsd.prog.mk
++++ pmake-1.111/mk/bsd.prog.mk
+@@ -0,0 +1,202 @@
++#	$NetBSD: bsd.prog.mk,v 1.100 1999/02/12 01:10:08 lukem Exp $
++#	@(#)bsd.prog.mk	8.2 (Berkeley) 4/2/94
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.include <bsd.obj.mk>
++.MAIN:		all
++.endif
++
++.PHONY:		cleanprog proginstall scriptsinstall
++realinstall:	proginstall scriptsinstall
++clean cleandir distclean: cleanprog
++
++CFLAGS+=	${COPTS}
++
++# ELF platforms depend on crtbegin.o and crtend.o
++.if ${OBJECT_FMT} == "ELF"
++LIBCRTBEGIN?=	${DESTDIR}/usr/lib/crtbegin.o
++LIBCRTEND?=	${DESTDIR}/usr/lib/crtend.o
++.else
++LIBCRTBEGIN?=
++LIBCRTEND?=
++.endif
++
++LIBCRT0?=	
++
++LIBBZ2?=	${DESTDIR}/usr/lib/libbz2.a
++LIBC?=		${DESTDIR}/usr/lib/libc.a
++LIBC_PIC?=	${DESTDIR}/usr/lib/libc_pic.a
++LIBCOMPAT?=	${DESTDIR}/usr/lib/libcompat.a
++LIBCRYPT?=	${DESTDIR}/usr/lib/libcrypt.a
++LIBCURSES?=	${DESTDIR}/usr/lib/libcurses.a
++LIBDBM?=	${DESTDIR}/usr/lib/libdbm.a
++LIBDES?=	${DESTDIR}/usr/lib/libdes.a
++LIBEDIT?=	${DESTDIR}/usr/lib/libedit.a
++LIBGCC?=	${DESTDIR}/usr/lib/libgcc.a
++LIBGNUMALLOC?=	${DESTDIR}/usr/lib/libgnumalloc.a
++LIBKDB?=	${DESTDIR}/usr/lib/libkdb.a
++LIBKRB?=	${DESTDIR}/usr/lib/libkrb.a
++LIBKVM?=	${DESTDIR}/usr/lib/libkvm.a
++LIBL?=		${DESTDIR}/usr/lib/libl.a
++LIBM?=		${DESTDIR}/usr/lib/libm.a
++LIBMP?=		${DESTDIR}/usr/lib/libmp.a
++LIBNTP?=	${DESTDIR}/usr/lib/libntp.a
++LIBOBJC?=	${DESTDIR}/usr/lib/libobjc.a
++LIBPC?=		${DESTDIR}/usr/lib/libpc.a
++LIBPCAP?=	${DESTDIR}/usr/lib/libpcap.a
++LIBPLOT?=	${DESTDIR}/usr/lib/libplot.a
++LIBPOSIX?=	${DESTDIR}/usr/lib/libposix.a
++LIBRESOLV?=	${DESTDIR}/usr/lib/libresolv.a
++LIBRPCSVC?=	${DESTDIR}/usr/lib/librpcsvc.a
++LIBSKEY?=	${DESTDIR}/usr/lib/libskey.a
++LIBTERMCAP?=	${DESTDIR}/usr/lib/libtermcap.a
++LIBTELNET?=	${DESTDIR}/usr/lib/libtelnet.a
++LIBUTIL?=	${DESTDIR}/usr/lib/libutil.a
++LIBWRAP?=	${DESTDIR}/usr/lib/libwrap.a
++LIBY?=		${DESTDIR}/usr/lib/liby.a
++LIBZ?=		${DESTDIR}/usr/lib/libz.a
++
++.if defined(SHAREDSTRINGS)
++CLEANFILES+=strings
++.c.o:
++	${CC} -E ${CFLAGS} ${.IMPSRC} | xstr -c -
++	@${CC} ${CFLAGS} -c x.c -o ${.TARGET}
++	@rm -f x.c
++
++.cc.o:
++	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
++	@mv -f x.c x.cc
++	@${CXX} ${CXXFLAGS} -c x.cc -o ${.TARGET}
++	@rm -f x.cc
++
++.C.o:
++	${CXX} -E ${CXXFLAGS} ${.IMPSRC} | xstr -c -
++	@mv -f x.c x.C
++	@${CXX} ${CXXFLAGS} -c x.C -o ${.TARGET}
++	@rm -f x.C
++.endif
++
++
++.if defined(PROG)
++SRCS?=		${PROG}.c
++
++DPSRCS+=	${SRCS:M*.l:.l=.c} ${SRCS:M*.y:.y=.c}
++CLEANFILES+=	${DPSRCS}
++.if defined(YHEADER)
++CLEANFILES+=	${SRCS:M*.y:.y=.h}
++.endif
++
++.if !empty(SRCS:N*.h:N*.sh)
++OBJS+=		${SRCS:N*.h:N*.sh:R:S/$/.o/g}
++LOBJS+=		${LSRCS:.c=.ln} ${SRCS:M*.c:.c=.ln}
++.endif
++
++.if defined(OBJS) && !empty(OBJS)
++.NOPATH: ${OBJS}
++.if defined(DESTDIR)
++
++${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
++	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} -nostdlib -L${DESTDIR}/usr/lib ${LIBCRT0} ${LIBCRTBEGIN} ${OBJS} ${LDADD} -lgcc -lc -lgcc ${LIBCRTEND}
++
++.else
++
++${PROG}: ${LIBCRT0} ${DPSRCS} ${OBJS} ${LIBC} ${LIBCRTBEGIN} ${LIBCRTEND} ${DPADD}
++	${CC} ${LDFLAGS} ${LDSTATIC} -o ${.TARGET} ${OBJS} ${LDADD}
++
++.endif	# defined(DESTDIR)
++.endif	# defined(OBJS) && !empty(OBJS)
++
++.if !defined(MAN)
++MAN=	${PROG}.1
++.endif	# !defined(MAN)
++.endif	# defined(PROG)
++
++all: ${PROG}
++
++cleanprog:
++	rm -f a.out [Ee]rrs mklog core *.core \
++	    ${PROG} ${OBJS} ${LOBJS} ${CLEANFILES}
++
++.if defined(SRCS)
++afterdepend: .depend
++	@(TMP=/tmp/_depend$$$$; \
++	    sed -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.ln:/' \
++	      < .depend > $$TMP; \
++	    mv $$TMP .depend)
++.endif
++
++.if defined(PROG) && !target(proginstall)
++PROGNAME?= ${PROG}
++proginstall:: ${DESTDIR}${BINDIR}/${PROGNAME}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${BINDIR}/${PROGNAME}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${BINDIR}/${PROGNAME}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${BINDIR}/${PROGNAME}
++${DESTDIR}${BINDIR}/${PROGNAME}: ${PROG}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} ${STRIPFLAG} -o ${BINOWN} \
++	    -g ${BINGRP} -m ${BINMODE} ${.ALLSRC} ${.TARGET}
++.endif
++
++.if !target(proginstall)
++proginstall::
++.endif
++
++.if defined(SCRIPTS) && !target(scriptsinstall)
++SCRIPTSDIR?=${BINDIR}
++SCRIPTSOWN?=${BINOWN}
++SCRIPTSGRP?=${BINGRP}
++SCRIPTSMODE?=${BINMODE}
++.for S in ${SCRIPTS}
++SCRIPTSDIR_${S}?=${SCRIPTSDIR}
++SCRIPTSOWN_${S}?=${SCRIPTSOWN}
++SCRIPTSGRP_${S}?=${SCRIPTSGRP}
++SCRIPTSMODE_${S}?=${SCRIPTSMODE}
++.if defined(SCRIPTSNAME)
++SCRIPTSNAME_${S} ?= ${SCRIPTSNAME}
++.else
++SCRIPTSNAME_${S} ?= ${S:T:R}
++.endif
++SCRIPTSDIR_${S} ?= ${SCRIPTSDIR}
++scriptsinstall:: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++.if !defined(UPDATE)
++.PHONY: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++.endif
++.if !defined(BUILD)
++${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: .MADE
++.endif
++
++.PRECIOUS: ${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}
++${DESTDIR}${SCRIPTSDIR_${S}}/${SCRIPTSNAME_${S}}: ${S}
++	${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -o ${SCRIPTSOWN_${S}} -g \
++	    ${SCRIPTSGRP_${S}} -m ${SCRIPTSMODE_${S}} ${.ALLSRC} ${.TARGET}
++.endfor
++.endif
++
++.if !target(scriptsinstall)
++scriptsinstall::
++.endif
++
++lint: ${LOBJS}
++.if defined(LOBJS) && !empty(LOBJS)
++	${LINT} ${LINTFLAGS} ${LDFLAGS:M-L*} ${LOBJS} ${LDADD}
++.endif
++
++.include <bsd.man.mk>
++.include <bsd.nls.mk>
++.include <bsd.files.mk>
++.include <bsd.inc.mk>
++.include <bsd.links.mk>
++.include <bsd.dep.mk>
++.include <bsd.sys.mk>
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++regress:
+--- pmake-1.111.orig/mk/bsd.subdir.mk
++++ pmake-1.111/mk/bsd.subdir.mk
+@@ -0,0 +1,34 @@
++#	$NetBSD: bsd.subdir.mk,v 1.31 1999/02/11 05:01:39 tv Exp $
++#	@(#)bsd.subdir.mk	8.1 (Berkeley) 6/8/93
++
++.if !target(__initialized__)
++__initialized__:
++.if exists(${.CURDIR}/../Makefile.inc)
++.include "${.CURDIR}/../Makefile.inc"
++.endif
++.include <bsd.own.mk>
++.MAIN:		all
++.endif
++
++.for dir in ${SUBDIR}
++.if exists(${dir}.${MACHINE})
++__REALSUBDIR+=${dir}.${MACHINE}
++.else
++__REALSUBDIR+=${dir}
++.endif
++.endfor
++
++.for dir in ${__REALSUBDIR}
++.for targ in ${TARGETS}
++.PHONY: ${targ}-${dir}
++${targ}-${dir}: .MAKE
++	@echo "${targ} ===> ${_THISDIR_}${dir}"
++	@cd ${.CURDIR}/${dir}; \
++	${MAKE} "_THISDIR_=${_THISDIR_}${dir}/" ${targ}
++subdir-${targ}: ${targ}-${dir}
++${targ}: subdir-${targ}
++.endfor
++.endfor
++
++# Make sure all of the standard targets are defined, even if they do nothing.
++${TARGETS}:
+--- pmake-1.111.orig/mk/bsd.sys.mk
++++ pmake-1.111/mk/bsd.sys.mk
+@@ -0,0 +1,110 @@
++#	$NetBSD: bsd.sys.mk,v 1.34 1999/01/31 09:17:20 mrg Exp $
++#
++# Overrides used for NetBSD source tree builds.
++
++.if defined(WARNS) && ${WARNS} == 1
++CFLAGS+= -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
++.endif
++.if !defined(NOGCCERROR)
++CFLAGS+= -Werror
++.endif
++CFLAGS+= ${CWARNFLAGS}
++
++.if defined(DESTDIR)
++CPPFLAGS+= -nostdinc -idirafter ${DESTDIR}/usr/include
++LINTFLAGS+= -d ${DESTDIR}/usr/include
++.endif
++
++.if defined(AUDIT)
++CPPFLAGS+= -D__AUDIT__
++.endif
++
++# Helpers for cross-compiling
++HOST_CC?=	cc
++HOST_CFLAGS?=	-O
++HOST_COMPILE.c?=${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} -c
++HOST_LINK.c?=	${HOST_CC} ${HOST_CFLAGS} ${HOST_CPPFLAGS} ${HOST_LDFLAGS}
++
++HOST_CPP?=	cpp
++HOST_CPPFLAGS?=
++
++HOST_LD?=	ld
++HOST_LDFLAGS?=
++
++STRIPPROG?=	strip
++
++
++.SUFFIXES:	.m .o .ln .lo
++
++# Objective C
++# (Defined here rather than in <sys.mk> because `.m' is not just
++#  used for Objective C source)
++.m:
++	${LINK.m} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.m.o:
++	${COMPILE.m} ${.IMPSRC}
++
++# Host-compiled C objects
++.c.lo:
++	${HOST_COMPILE.c} -o ${.TARGET} ${.IMPSRC}
++
++
++.if defined(PARALLEL) || defined(LPREFIX)
++LPREFIX?=yy
++LFLAGS+=-P${LPREFIX}
++# Lex
++.l:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c ${LDLIBS} -ll
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.l.c:
++	${LEX.l} -o${.TARGET} ${.IMPSRC}
++.l.o:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.l.lo:
++	${LEX.l} -o${.TARGET:R}.${LPREFIX}.c ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.${LPREFIX}.c 
++	rm -f ${.TARGET:R}.${LPREFIX}.c
++.endif
++
++# Yacc
++.if defined(YHEADER) || defined(YPREFIX)
++.if defined(YPREFIX)
++YFLAGS+=-p${YPREFIX}
++.endif
++.if defined(YHEADER)
++YFLAGS+=-d
++.endif
++.y:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
++	rm -f ${.TARGET:R}.tab.c ${.TARGET:R}.tab.h
++.y.h: ${.TARGET:R}.c
++.y.c:
++	${YACC.y} -o ${.TARGET} ${.IMPSRC}
++.y.o:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
++.y.lo:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c ${TARGET:R}.tab.h
++.elif defined(PARALLEL)
++.y:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} ${.TARGET:R}.tab.c ${LDLIBS}
++	rm -f ${.TARGET:R}.tab.c
++.y.c:
++	${YACC.y} -o ${.TARGET} ${.IMPSRC}
++.y.o:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c
++.y.lo:
++	${YACC.y} -b ${.TARGET:R} ${.IMPSRC}
++	${HOST_COMPILE.c} -o ${.TARGET} ${.TARGET:R}.tab.c
++	rm -f ${.TARGET:R}.tab.c
++.endif
+--- pmake-1.111.orig/mk/sys.mk
++++ pmake-1.111/mk/sys.mk
+@@ -0,0 +1,207 @@
++#	$NetBSD: sys.mk,v 1.54 1999/03/10 14:06:14 mycroft Exp $
++#	@(#)sys.mk	8.2 (Berkeley) 3/21/94
++
++unix?=		We run Debian GNU.
++
++.SUFFIXES: .out .a .ln .o .s .S .c .cc .C .F .f .r .y .l .cl .p .h .sh .m4
++
++.LIBS:		.a
++
++AR?=		ar
++ARFLAGS?=	rl
++RANLIB?=	ranlib
++
++AS?=		as
++AFLAGS?=
++COMPILE.s?=	${CC} ${AFLAGS} -c
++LINK.s?=	${CC} ${AFLAGS} ${LDFLAGS}
++COMPILE.S?=	${CC} ${AFLAGS} ${CPPFLAGS} -c -traditional-cpp
++LINK.S?=	${CC} ${AFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CC?=		cc
++.if ${MACHINE_ARCH} == "alpha" || \
++    ${MACHINE_ARCH} == "arm32" || \
++    ${MACHINE_ARCH} == "i386" || \
++    ${MACHINE_ARCH} == "m68k" || \
++    ${MACHINE_ARCH} == "mipsel" || ${MACHINE_ARCH} == "mipseb" || \
++    ${MACHINE_ARCH} == "sparc"
++CFLAGS?=	-O2
++.else
++CFLAGS?=	-O
++.endif
++COMPILE.c?=	${CC} ${CFLAGS} ${CPPFLAGS} -c
++LINK.c?=	${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CXX?=		c++
++CXXFLAGS?=	${CFLAGS}
++COMPILE.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} -c
++LINK.cc?=	${CXX} ${CXXFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++OBJC?=		${CC}
++OBJCFLAGS?=	${CFLAGS}
++COMPILE.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} -c
++LINK.m?=	${OBJC} ${OBJCFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++CPP?=		cpp
++CPPFLAGS?=	
++
++FC?=		f77
++FFLAGS?=	-O
++RFLAGS?=
++COMPILE.f?=	${FC} ${FFLAGS} -c
++LINK.f?=	${FC} ${FFLAGS} ${LDFLAGS}
++COMPILE.F?=	${FC} ${FFLAGS} ${CPPFLAGS} -c
++LINK.F?=	${FC} ${FFLAGS} ${CPPFLAGS} ${LDFLAGS}
++COMPILE.r?=	${FC} ${FFLAGS} ${RFLAGS} -c
++LINK.r?=	${FC} ${FFLAGS} ${RFLAGS} ${LDFLAGS}
++
++INSTALL?=	install
++
++LEX?=		lex
++LFLAGS?=
++LEX.l?=		${LEX} ${LFLAGS}
++
++LD?=		ld
++LDFLAGS?=
++
++LINT?=		lint
++LINTFLAGS?=	-chapbxzF
++
++LORDER?=	lorder
++
++MAKE?=		pmake
++
++NM?=		nm
++
++PC?=		pc
++PFLAGS?=
++COMPILE.p?=	${PC} ${PFLAGS} ${CPPFLAGS} -c
++LINK.p?=	${PC} ${PFLAGS} ${CPPFLAGS} ${LDFLAGS}
++
++SHELL?=		sh
++
++SIZE?=		size
++
++TSORT?= 	tsort
++
++YACC?=		yacc
++YFLAGS?=
++YACC.y?=	${YACC} ${YFLAGS}
++
++# C
++.c:
++	${LINK.c} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.c.o:
++	${COMPILE.c} ${.IMPSRC}
++.c.a:
++	${COMPILE.c} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++.c.ln:
++	${LINT} ${LINTFLAGS} ${CPPFLAGS:M-[IDU]*} -i ${.IMPSRC}
++
++# C++
++.cc:
++	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.cc.o:
++	${COMPILE.cc} ${.IMPSRC}
++.cc.a:
++	${COMPILE.cc} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.C:
++	${LINK.cc} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.C.o:
++	${COMPILE.cc} ${.IMPSRC}
++.C.a:
++	${COMPILE.cc} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Fortran/Ratfor
++.f:
++	${LINK.f} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.f.o:
++	${COMPILE.f} ${.IMPSRC}
++.f.a:
++	${COMPILE.f} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.F:
++	${LINK.F} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.F.o:
++	${COMPILE.F} ${.IMPSRC}
++.F.a:
++	${COMPILE.F} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++.r:
++	${LINK.r} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.r.o:
++	${COMPILE.r} ${.IMPSRC}
++.r.a:
++	${COMPILE.r} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Pascal
++.p:
++	${LINK.p} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.p.o:
++	${COMPILE.p} ${.IMPSRC}
++.p.a:
++	${COMPILE.p} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Assembly
++.s:
++	${LINK.s} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.s.o:
++	${COMPILE.s} ${.IMPSRC}
++.s.a:
++	${COMPILE.s} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++.S:
++	${LINK.S} -o ${.TARGET} ${.IMPSRC} ${LDLIBS}
++.S.o:
++	${COMPILE.S} ${.IMPSRC}
++.S.a:
++	${COMPILE.S} ${.IMPSRC}
++	${AR} ${ARFLAGS} $@ $*.o
++	rm -f $*.o
++
++# Lex
++.l:
++	${LEX.l} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} lex.yy.c ${LDLIBS} -ll
++	rm -f lex.yy.c
++.l.c:
++	${LEX.l} ${.IMPSRC}
++	mv lex.yy.c ${.TARGET}
++.l.o:
++	${LEX.l} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} lex.yy.c 
++	rm -f lex.yy.c
++
++# Yacc
++.y:
++	${YACC.y} ${.IMPSRC}
++	${LINK.c} -o ${.TARGET} y.tab.c ${LDLIBS}
++	rm -f y.tab.c
++.y.c:
++	${YACC.y} ${.IMPSRC}
++	mv y.tab.c ${.TARGET}
++.y.o:
++	${YACC.y} ${.IMPSRC}
++	${COMPILE.c} -o ${.TARGET} y.tab.c
++	rm -f y.tab.c
++
++# Shell
++.sh:
++	rm -f ${.TARGET}
++	cp ${.IMPSRC} ${.TARGET}

230 lines not on this page · raw message

146 lines not on this page · raw message

new file mode 100644
index 0000000..fa8fd5f

Lines of this file are not shown. View the raw message.

354 lines not on this page · raw message

new file mode 100644
index 0000000..5ccb2a8

Lines of this file are not shown. View the raw message.

46 lines not on this page · raw message

index f3d78d0..5cc5fac 100644
@@ -476,6 +476,7 @@ source "package/libargtable2/Config.in"
 source "package/argp-standalone/Config.in"
 source "package/boost/Config.in"
 source "package/libatomic_ops/Config.in"
+source "package/libbsd/Config.in"
 source "package/libcap/Config.in"
 source "package/libcap-ng/Config.in"
 source "package/libdaemon/Config.in"

new file mode 100644
index 0000000..d1f9e46
@@ -0,0 +1,17 @@
+config BR2_PACKAGE_LIBBSD_AVAILABLE
+	def_bool y
+
+comment "libbsd requires (other packages)"
+	depends on !BR2_PACKAGE_LIBBSD_AVAILABLE
+
+config BR2_PACKAGE_LIBBSD
+	bool "libbsd"
+	depends on BR2_PACKAGE_LIBBSD_AVAILABLE
+	help
+	  This library provides useful functions commonly found on BSD
+	  systems, and lacking on others like GNU systems, thus making
+	  it easier to port projects with strong BSD origins, without
+	  needing to embed the same code over and over again on each
+	  project.
+	  
+	  http://libbsd.freedesktop.org/

new file mode 100644
index 0000000..d7438e8
@@ -0,0 +1,25 @@
+#############################################################
+#
+# libbsd
+#
+#############################################################
+
+LIBBSD_VERSION         = 0.4.2
+LIBBSD_SOURCE          = libbsd-$(LIBBSD_VERSION).tar.gz
+LIBBSD_SITE            = http://libbsd.freedesktop.org/releases
+LIBBSD_LICENSE         = BSD-3c MIT
+LIBBSD_LICENSE_FILES   = LICENSE
+
+# man-pages are BSD-4c, so that license only matters
+# if doc is kept in the target rootfs
+ifeq ($(BR2_HAVE_DOCUMENTATION),y)
+LIBBSD_LICENSE        += BSD-4c
+endif
+
+LIBBSD_AUTORECONF      = YES
+LIBBSD_AUTORECONF_OPT  = -f -i
+LIBBSD_DEPENDENCIES    = host-automake
+
+LIBBSD_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))

index 5cc5fac..f882301 100644
@@ -506,6 +506,7 @@ endmenu
 menu "Text and terminal handling"
 source "package/enchant/Config.in"
 source "package/icu/Config.in"
+source "package/libedit2/Config.in"
 source "package/libiconv/Config.in"
 source "package/ncurses/Config.in"
 source "package/newt/Config.in"

new file mode 100644
index 0000000..0d779cc
@@ -0,0 +1,17 @@
+config BR2_PACKAGE_LIBEDIT2_AVAILABLE
+	def_bool y
+	depends on BR2_PACKAGE_LIBBSD_AVAILABLE
+
+comment "libedit2 requires (other packages)"
+	depends on !BR2_PACKAGE_LIBEDIT2_AVAILABLE
+
+config BR2_PACKAGE_LIBEDIT2
+	bool "libedit2"
+	depends on BR2_PACKAGE_LIBEDIT2_AVAILABLE
+	select BR2_PACKAGE_LIBBSD
+	select BR2_PACKAGE_NCURSES
+	help
+	  The editline library (from BSD) provides generic line editing
+	  and history functions. It slightly resembles GNU readline.
+	  
+	  http://ftp.netbsd.org/pub/NetBSD/NetBSD-release-5-0/src/lib/libedit/

new file mode 100644
index 0000000..91645e4
@@ -0,0 +1,25 @@
+ 01-Makefile.diff by Neal H Walfield <[email protected]> and
+ Gergely Nagy <[email protected]>
+
+ Add the necessary includes and other things to the libedit
+ Makefile, so it will compile on GNU systems, with our supplied
+ glue code
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/Makefile
++++ b/libedit/Makefile
+@@ -1,6 +1,13 @@
+ #	$NetBSD: Makefile,v 1.36 2007/05/28 12:06:18 tls Exp $
+ #	@(#)Makefile	8.1 (Berkeley) 6/4/93
+ 
++OS!=	sh -c "case `uname -s` in GNU|GNU/*) echo GNU ;; *) uname -s ;; esac"
++
++.if ${OS} == GNU || ${OS} == Linux
++CFLAGS += -include bsd/bsd.h
++MKLINT=no
++.endif
++
+ USE_SHLIBDIR=	yes
+ 
+ WARNS=	3

new file mode 100644
index 0000000..b060fa4
@@ -0,0 +1,24 @@
+ 02-el.c-issetugid.diff by Gergely Nagy <[email protected]>
+
+ issetugid(2) is not implemented on GNU systems, so #ifdef it out
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/el.c	2008-04-06 02:53:28.000000000 +1100
++++ b/libedit/el.c	2009-06-23 08:51:48.000000000 +1000
+@@ -479,12 +479,14 @@ el_source(EditLine *el, const char *fnam
+ 
+ 	fp = NULL;
+ 	if (fname == NULL) {
+-#ifdef HAVE_ISSETUGID
++#if 1
+ 		static const char elpath[] = "/.editrc";
+ 		char path[MAXPATHLEN];
+ 
++#ifndef __GLIBC__
+ 		if (issetugid())
+ 			return (-1);
++#endif
+ 		if ((ptr = getenv("HOME")) == NULL)
+ 			return (-1);
+ 		if (strlcpy(path, ptr, sizeof(path)) >= sizeof(path))

new file mode 100644
index 0000000..aadd36a
@@ -0,0 +1,40 @@
+ 03-el.c-MAXPATHLEN.diff by Gergely Nagy <[email protected]>
+
+ on systems without MAXPATHLEN, allocate memory dynamically
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/el.c	2009-06-23 08:57:04.000000000 +1000
++++ b/libedit/el.c	2009-06-23 08:57:30.000000000 +1000
+@@ -481,7 +481,11 @@ el_source(EditLine *el, const char *fnam
+ 	if (fname == NULL) {
+ #if 1
+ 		static const char elpath[] = "/.editrc";
++#ifdef MAXPATHLEN
+ 		char path[MAXPATHLEN];
++#else
++		char *path;
++#endif
+ 
+ #ifndef __GLIBC__
+ 		if (issetugid())
+@@ -489,10 +493,19 @@ el_source(EditLine *el, const char *fnam
+ #endif
+ 		if ((ptr = getenv("HOME")) == NULL)
+ 			return (-1);
++#ifndef MAXPATHLEN
++                path = (char *)malloc(strlen(ptr) + strlen(elpath) + 10);
++		if (path == NULL)
++			return (-1);
++		/* Always succeeds, since we have enough memory */
++		strcpy(path, ptr);
++		strcat(path, elpath);
++#else
+ 		if (strlcpy(path, ptr, sizeof(path)) >= sizeof(path))
+ 			return (-1);
+ 		if (strlcat(path, elpath, sizeof(path)) >= sizeof(path))
+ 			return (-1);
++#endif
+ 		fname = path;
+ #else
+ 		/*

new file mode 100644
index 0000000..84257b9
@@ -0,0 +1,17 @@
+ 04-readline.h-stdio.diff by Gergely Nagy <[email protected]>
+
+ since readline.h uses types defined in stdio.h, that header should
+ be included
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline/readline.h	2008-04-29 16:53:01.000000000 +1000
++++ b/libedit/readline/readline.h	2009-06-23 08:35:58.000000000 +1000
+@@ -31,6 +31,7 @@
+ #ifndef _READLINE_H_
+ #define _READLINE_H_
+ 
++#include <stdio.h>
+ #include <sys/types.h>
+ 
+ /* list of readline stuff supported by editline library's readline wrapper */

new file mode 100644
index 0000000..f30093f
@@ -0,0 +1,20 @@
+ 08-readline-history.h.diff by Pawel Wiecek <[email protected]>
+ (compatibility with older versions)
+
+ Setting the global variable rl_inhibit_completion to 1 did indeed
+ disable completion, but the invoking key (e.g., <TAB>) was not
+ inserted directly into the input line as it should be.
+ This patch fixes this problem, and also declares rl_inhibit_completion
+ in readline.h for better readline compatibility.
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline/Makefile	2003-08-03 19:23:15.000000000 +1000
++++ b/libedit/readline/Makefile	2009-06-23 08:35:58.000000000 +1000
+@@ -10,4 +10,6 @@ INCS=		readline.h
+ INCSDIR=	/usr/include/readline
+ INCSYMLINKS=	readline.h ${INCSDIR}/history.h
+ 
++incinstall:: linksinstall
++
+ .include <bsd.prog.mk>

new file mode 100644
index 0000000..c8ce262
@@ -0,0 +1,18 @@
+ 10-define_SIZE_T_MAX.diff by Anibal Monsalve Salazar
+ define SIZE_T_MAX as UINT_MAX in limits.h
+
+ Yann E. MORIN: patch from debian.
+
+--- a/libedit/readline.c	2008-04-29 16:53:01.000000000 +1000
++++ a/libedit/readline.c	2008-06-14 23:54:16.000000000 +1000
+@@ -61,6 +61,10 @@ __RCSID("$NetBSD: readline.c,v 1.75 2008
+ #include "readline/readline.h"
+ #include "filecomplete.h"
+ 
++#ifndef SIZE_T_MAX
++#define SIZE_T_MAX UINT_MAX
++#endif
++
+ void rl_prep_terminal(int);
+ void rl_deprep_terminal(void);
+ 

54 lines not on this page · raw message

new file mode 100644
index 0000000..0a41ce3
@@ -0,0 +1,23 @@
+http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488456
+
+Patch by Kees Cook <[email protected]>
+
+Yann E. MORIN: patch from debian.
+
+--- a/libedit/vi.c	2006-10-22 17:48:13.000000000 +1000
++++ b/libedit/vi.c	2009-06-23 08:35:58.000000000 +1000
+@@ -1012,8 +1012,12 @@ vi_histedit(EditLine *el, int c)
+ 	if (fd < 0)
+ 		return CC_ERROR;
+ 	cp = el->el_line.buffer;
+-	write(fd, cp, el->el_line.lastchar - cp +0u);
+-	write(fd, "\n", 1);
++	if (write(fd, cp, el->el_line.lastchar - cp +0u)<0 ||
++	    write(fd, "\n", 1)<0) {
++		close(fd);
++		unlink(tempfile);
++		return CC_ERROR;
++	}
+ 	pid = fork();
+ 	switch (pid) {
+ 	case -1:

75 lines not on this page · raw message

new file mode 100644
index 0000000..47ac871
@@ -0,0 +1,13 @@
+prefix=/usr
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: libedit
+Description: Not just a replacement library for libreadline and libhistory.
+Version: 2.11
+Requires: libbsd ncurses
+Requires.private:
+Libs: -L${libdir} -ledit
+Libs.private:
+Cflags: -I${includedir}

index f882301..a24df21 100644
@@ -555,6 +555,7 @@ source "package/bind/Config.in"
 source "package/bmon/Config.in"
 source "package/bridge-utils/Config.in"
 source "package/can-utils/Config.in"
+source "package/ceph/Config.in"
 source "package/connman/Config.in"
 source "package/ctorrent/Config.in"
 source "package/conntrack-tools/Config.in"

new file mode 100644
index 0000000..5704883
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_CEPH_AVAILABLE
+	def_bool y
+	depends on BR2_PACKAGE_LIBNSS
+	depends on BR2_PACKAGE_UTIL_LINUX_LIBUUID
+	depends on BR2_PACKAGE_LIBEDIT2_AVAILABLE
+
+comment "ceph requires libnss, and libuuid (from util-linux)"
+	depends on !BR2_PACKAGE_CEPH_AVAILABLE
+
+config BR2_PACKAGE_CEPH
+	bool "ceph"
+	depends on BR2_PACKAGE_CEPH_AVAILABLE
+	select BR2_PACKAGE_LIBEDIT2
+	select BR2_PACKAGE_EXPAT
+	help
+	  Ceph is a distributed object store and file system designed to
+	  provide excellent performance, reliability and scalability.
+	  
+	  http://ceph.com/

63 lines not on this page · raw message

61 lines not on this page · raw message

50 lines not on this page · raw message

53 lines not on this page · raw message

index a24df21..08029c0 100644
@@ -538,6 +538,7 @@ source "package/collectd/Config.in"
 source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
+source "package/qemu/Config.in"
 source "package/shared-mime-info/Config.in"
 source "package/sound-theme-borealis/Config.in"
 source "package/sound-theme-freedesktop/Config.in"

new file mode 100644
index 0000000..bd37b34
@@ -0,0 +1,27 @@
+config BR2_PACKAGE_QEMU_AVAILABLE
+	def_bool y
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+
+comment "qemu requires a toolchain with threads"
+	depends on !BR2_PACKAGE_QEMU_AVAILABLE
+
+config BR2_PACKAGE_QEMU
+	bool "QEMU"
+	depends on BR2_PACKAGE_QEMU_AVAILABLE
+	select BR2_PACKAGE_ZLIB
+	select BR2_PACKAGE_LIBGLIB2
+	help
+	  QEMU is a generic and open source machine emulator and virtualizer.
+	  
+	  When used as a machine emulator, QEMU can run OSes and programs made
+	  for one machine (e.g. an ARM board) on a different machine (e.g.
+	  your own PC). By using dynamic translation, it achieves very good
+	  performance.
+	  
+	  When used as a virtualizer, QEMU achieves near native performances
+	  by executing the guest code directly on the host CPU. QEMU supports
+	  virtualization when executing under the Xen hypervisor or using the
+	  KVM kernel module in Linux. When using KVM, QEMU can virtualize x86,
+	  server and embedded PowerPC, and S390 guests.
+	  
+	  http://qemu.org/

95 lines not on this page · raw message

index bd37b34..c8623bf 100644
@@ -25,3 +25,36 @@ config BR2_PACKAGE_QEMU
 	  server and embedded PowerPC, and S390 guests.
 	  
 	  http://qemu.org/
+
+if BR2_PACKAGE_QEMU
+
+comment "Emulators selection"
+
+# We need at least one to be selected
+config BR2_PACKAGE_QEMU_EMUL_SET
+	bool
+
+config BR2_PACKAGE_QEMU_FORCE_SYSTEM
+	bool
+	default n if BR2_PACKAGE_QEMU_EMUL_SET
+	default y if ! BR2_PACKAGE_QEMU_EMUL_SET
+	select BR2_PACKAGE_QEMU_SYSTEM
+
+config BR2_PACKAGE_QEMU_SYSTEM
+	bool "Enable all systems emulation"
+	help
+	  Say 'y' to build all system emulators/virtualisers that QEMU supports.
+
+config BR2_PACKAGE_QEMU_LINUX_USER
+	bool "Enable all Linux user-land emulation"
+	select BR2_PACKAGE_QEMU_EMUL_SET
+	help
+	  Say 'y' to build all Linux user-land emulators that QEMU supports.
+
+config BR2_PACKAGE_QEMU_BSD_USER
+	bool "Enable all BSD user-land emulation"
+	select BR2_PACKAGE_QEMU_EMUL_SET
+	help
+	  Say 'y' to build all BSD user-land emulators that QEMU supports.
+
+endif # BR2_PACKAGE_QEMU

index 83d8227..14d0505 100644
@@ -25,6 +25,24 @@ QEMU_VARS =
     PYTHON=$(HOST_DIR)/usr/bin/python                                               \
     PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages    \
 
+ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y)
+QEMU_OPTS += --enable-system
+else
+QEMU_OPTS += --disable-system
+endif
+
+ifeq ($(BR2_PACKAGE_QEMU_LINUX_USER),y)
+QEMU_OPTS += --enable-linux-user
+else
+QEMU_OPTS += --disable-linux-user
+endif
+
+ifeq ($(BR2_PACKAGE_QEMU_BSD_USER),y)
+QEMU_OPTS += --enable-bsd-user
+else
+QEMU_OPTS += --disable-bsd-user
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we can
 #       not use the autotools-package infrastructure. So we have to use the

@@ -45,9 +63,6 @@ define QEMU_CONFIGURE_CMDS
 	        --enable-nptl                       \
 	        --enable-attr                       \
 	        --enable-vhost-net                  \
-	        --enable-system                     \
-	        --enable-linux-user                 \
-	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
 	        --disable-sdl                       \

index c8623bf..bd4b939 100644
@@ -30,6 +30,25 @@ if BR2_PACKAGE_QEMU
 
 comment "Emulators selection"
 
+config BR2_PACKAGE_QEMU_CUSTOM_TARGETS
+	string "Enable specific targets"
+	help
+	  Enter here the list of QEMU targets you want to build. For example:
+
+	    System emulation      | User-land emulation
+	    ----------------------+-----------------------
+	    i386-softmmu          | i386-linux-user
+	    arm-softmmu           | ppc-linux-user
+	    x86_64-softmmu        | sparc-bsd-user
+	    ...                   | ...
+
+config QEMU_FOO
+	bool # To break the indentation
+
+if BR2_PACKAGE_QEMU_CUSTOM_TARGETS = ""
+
+comment "... or you can select emulator families to enable, below:"
+
 # We need at least one to be selected
 config BR2_PACKAGE_QEMU_EMUL_SET
 	bool

@@ -57,4 +76,6 @@ config BR2_PACKAGE_QEMU_BSD_USER
 	help
 	  Say 'y' to build all BSD user-land emulators that QEMU supports.
 
+endif # BR2_PACKAGE_QEMU_CUSTOM_TARGETS == ""
+
 endif # BR2_PACKAGE_QEMU

index 14d0505..a942e0b 100644
@@ -43,6 +43,10 @@ else
 QEMU_OPTS += --disable-bsd-user
 endif
 
+ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
+QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we can
 #       not use the autotools-package infrastructure. So we have to use the

index bd4b939..a624632 100644
@@ -78,4 +78,13 @@ config BR2_PACKAGE_QEMU_BSD_USER
 
 endif # BR2_PACKAGE_QEMU_CUSTOM_TARGETS == ""
 
+comment "Frontends"
+
+config BR2_PACKAGE_QEMU_SDL
+	bool "Enable SDL frontend"
+	select BR2_PACKAGE_SDL
+	help
+	  Say 'y' to enable the SDL frontend, that is, a graphical window
+	  presenting the VM's display.
+
 endif # BR2_PACKAGE_QEMU

index a942e0b..acba0d4 100644
@@ -24,6 +24,7 @@ QEMU_OPTS =
 QEMU_VARS =                                                                         \
     PYTHON=$(HOST_DIR)/usr/bin/python                                               \
     PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages    \
+    SDL_CONFIG=$(STAGING_DIR)/usr/bin/sdl-config                                    \
 
 ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y)
 QEMU_OPTS += --enable-system

@@ -47,6 +48,14 @@ ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
 QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
+QEMU_OPTS += --enable-sdl
+QEMU_DEPENDENCIES += sdl
+QEMU_VARS += SDL_CONFIG=$(BR2_STAGING_DIR)/usr/bin/sdl-config
+else
+QEMU_OPTS += --disable-sdl
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we can
 #       not use the autotools-package infrastructure. So we have to use the

@@ -69,7 +78,6 @@ define QEMU_CONFIGURE_CMDS
 	        --enable-vhost-net                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
-	        --disable-sdl                       \
 	        --disable-vnc                       \
 	        --disable-virtfs                    \
 	        --disable-brlapi                    \