ARM: dts: omap5: EMIF and LPDDR2 device tree data

This patch series adds Device tree data for the EMIF sdram controllers in OMAP5 and LPDDR2 memory devices in OMAP5-evm board.

Testing:
- Boot tested on OMAP5430 evm.
- Built EMIF as a module.

Changes from v2:
* Rebased on top of
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.8/dts
* Addressed few other comments from Benoit.

Lokesh Vutla (3):
ARM: dts: omap5-evm: Fix size of memory defined for EVM
ARM: dts: omap5: EMIF device tree data for OMAP5 boards
ARM: dts: omap5-evm: LPDDR2 memory device details for EVM

 arch/arm/boot/dts/omap5-evm.dts           |   13 +++++-
 arch/arm/boot/dts/omap5.dtsi              |   22 ++++++++++
 arch/arm/boot/dts/samsung_k3pe0e000b.dtsi |   67 +++++++++++++++++++++++++++++
 3 files changed, 101 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/samsung_k3pe0e000b.dtsi

1.7.9.5

Memory present for OMAP5-evm is 2GB. But in dts file it is specified as 1GB. Correcting the same.

---
 arch/arm/boot/dts/omap5-evm.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index c663eba..88d3d9b8 100644
@@ -15,7 +15,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
+		reg = <0x80000000 0x80000000>; /* 2 GB */
 	};
 
 	vmmcsd_fixed: fixedregulator-mmcsd {

1.7.9.5

Adding EMIF device tree data for OMAP5 boards.

---
 arch/arm/boot/dts/omap5.dtsi |   22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

index ead74c8..790bb2a 100644
@@ -474,5 +474,27 @@
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
+
+		emif1: emif at 0x4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <0 110 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif at 0x4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <0 111 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
 	};
 };

1.7.9.5

Samsung's K3PE0E000B memory part is used in OMAP5-evm board. Adding timings and geometry details for Samsung's memory part and attaching the same to device-handle of EMIF1/2.

---
 arch/arm/boot/dts/omap5-evm.dts           |   11 +++++
 arch/arm/boot/dts/samsung_k3pe0e000b.dtsi |   67 +++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)
 create mode 100644 arch/arm/boot/dts/samsung_k3pe0e000b.dtsi

index 88d3d9b8..8722c15 100644
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap5.dtsi"
+/include/ "samsung_k3pe0e000b.dtsi"
 
 / {
 	model = "TI OMAP5 EVM board";

@@ -140,3 +141,13 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};

1.7.9.5

Hi Lokesh,

Thanks for this quick update.
I've just applied your series in my for_3.8/dts_part2 branch.

Regards,
Benoit