ARM: at91: dt: evk-pro3: enable uart0 and uart2
PATCH RESEND 1/1 ARM: at91: dt: evk-pro3: enable uart0 and uart2
Signed-off-by Fabio Porcedda <[email protected]>
---
based on v3.7-rc5
arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/evk-pro3.dts +8 -0
@@ -22,6 +22,14 @@ status = "okay"; }; + usart0: serial at fffb0000 { + status = "okay"; + }; + + usart2: serial at fffb8000 { + status = "okay"; + }; + usb1: gadget at fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay";
Signature · 1 line
1.8.0
PATCH RESEND 1/1 ARM: at91: dt: evk-pro3: enable uart0 and uart2
On 11/12/2012 09:09 AM, Fabio Porcedda :
Quoted 1 line
Signed-off-by Fabio Porcedda <[email protected]>
Fine, queued in at91-3.8-dt branch.
Acked-by Nicolas Ferre <[email protected]>
You may need to pay attention to pinctrl that will appear in 3.8.
Best regards,
Quoted 26 lines
---
based on v3.7-rc5arch/arm/boot/dts/evk-pro3.dts | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/boot/dts/evk-pro3.dts +8
-0@@ -22,6 +22,14 @@ status = "okay"; }; + usart0: serial at fffb0000 { + status = "okay"; + }; + + usart2: serial at fffb8000 { + status = "okay"; + }; + usb1: gadget at fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay";
Signature · 1 line
Nicolas Ferre