ARM: OMAP3: Devkit8000: Fix dvi output
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 14 lines · Thomas Weber
Add i2c bus number for DVI output.
The driver uses this to detect if a panel is connected and to read EDID.Signed-off-by Thomas Weber <[email protected]>Cc [email protected] #v3.5 v3.6--- arch/arm/mach-omap2/board-devkit8000.c | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-omap2/board-devkit8000.c +0
-0
arch/arm/mach-omap2/board-devkit8000.c static struct omap_dss_device devkit8000_lcd_device = { · line 143
Quoted 6 lines
arch/arm/mach-omap2/board-devkit8000.c +1
-0@@ -138,6 +138,7 @@ static struct omap_dss_device devkit8000_lcd_device = { };static struct tfp410_platform_data dvi_panel = { + .i2c_bus_num =1 , .power_down_gpio =-1 , };
That change is already included in the "[PATCH] OMAP: board-files: fix i2c_bus for tfp410" path I sent on Friday.
Tomi
PATCH 1/1 ARM: OMAP3: Devkit8000: Fix dvi output
Hello Tomi,
Quoted 17 lines · Tomi Valkeinen
Quoted 16 lines · Thomas Weber
Add i2c bus number for DVI output.
The driver uses this to detect if a panel is connected and to read EDID.Signed-off-by Thomas Weber <[email protected]>Cc stable at vger.kernel.org #v3.5 v3.6--- arch/arm/mach-omap2/board-devkit8000.c | 1 + 1 file changed, 1 insertion(+)arch/arm/mach-omap2/board-devkit8000.c +0
-0@@ -138,6 +138,7 @@ static struct omap_dss_device devkit8000_lcd_device = { };
Quoted 10 lines
arch/arm/mach-omap2/board-devkit8000.c static struct omap_dss_device devkit8000_lcd_device = { · line 143
Quoted 4 lines
arch/arm/mach-omap2/board-devkit8000.c +1
-0static struct tfp410_platform_data dvi_panel = { + .i2c_bus_num =1 , .power_down_gpio =-1 , };That change is already included in the "[PATCH] OMAP: board-files: fix
i2c_busfor tfp410" path I sent on Friday.Tomi
Thanks.
Thomas