ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs

PATCH New Mark Brown 2 participants 2 messages Nov 27, 2012

Subsystems (3)

Arm (32-bit) Arm sub-architectures Arm Samsung Exynos

lore

Share & tools

lore

Mark Brown

author

2012-11-27 15:34 UTC #0 lore raw

PATCH 1/1 ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs

These are not actually connected but it saves them going through probe deferral.

Signed-off-by Mark Brown <[email protected]>

---
 arch/arm/mach-s3c64xx/mach-crag6410.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

arch/arm/mach-s3c64xx/mach-crag6410.c +10 -0

index c06bcfa..701f421 100644
@@ -333,6 +333,16 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
 	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
 	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
 	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
 };
 
 static struct regulator_init_data wallvdd_data = {

Signature · 1 line

1.7.10.4

Kukjin Kim

Applied

2012-11-27 23:31 UTC #1 lore raw

PATCH 1/1 ARM: S3C64XX: Add dummy supplies for Glenfarclas LDOs

Quoted 19 lines · Mark Brown

These are not actually connected but it saves them going through probe deferral.

Signed-off-by Mark Brown<[email protected]>

---
  arch/arm/mach-s3c64xx/mach-crag6410.c |   10 ++++++++++
  1 file changed, 10 insertions(+)

arch/arm/mach-s3c64xx/mach-crag6410.c +3 -0

index c06bcfa..701f421 100644
@@ -333,6 +333,16 @@ static struct regulator_consumer_supply wallvdd_consumers[] = {
  	REGULATOR_SUPPLY("DC1VDD", "1-0034"),
  	REGULATOR_SUPPLY("DC2VDD", "1-0034"),
  	REGULATOR_SUPPLY("DC3VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO1VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO2VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO4VDD", "1-0034"),

arch/arm/mach-s3c64xx/mach-crag6410.c static struct regulator_consumer_supply wallvdd_consumers[] = { · line 348

Quoted 10 lines

arch/arm/mach-s3c64xx/mach-crag6410.c +7 -0

+	REGULATOR_SUPPLY("LDO5VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO6VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO7VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO8VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO9VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO10VDD", "1-0034"),
+	REGULATOR_SUPPLY("LDO11VDD", "1-0034"),
  };
 
  static struct regulator_init_data wallvdd_data = {

Applied, thanks.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.