Skip to contentSkip to conversation

tegra: remove custom TEGRA_DEVICE_SETTINGS for board files

PATCH New Marc Dietrich 2 participants 2 messages Nov 29, 2012

lore
Share & tools
lore

Marc Dietrich

author
#0 lore raw

PATCH 1/1 tegra: remove custom TEGRA_DEVICE_SETTINGS for board files

TEGRA_DEVICE_SETTINGS lives now in tegra-common-post.h.

This removes custom TEGRA_DEVICE_SETTINGS for all tegra boards providing video output, except seaboard, which was fixed by Stephen already.

Cc Thierry Reding <[email protected]>
Signed-off-by Marc Dietrich <[email protected]>

---
Tom,

this needs to be applied ontop of Stephen's patch "tegra: only define TEGRA_DEVICE_SETTINGS if not already defined"

 include/configs/medcom-wide.h | 6 ------
 include/configs/paz00.h       | 6 ------
 include/configs/tec.h         | 6 ------
 3 files changed, 18 deletions(-)
include/configs/medcom-wide.h +0 -6
index 452d587..bae4ba0 100644
@@ -78,12 +78,6 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
-#undef TEGRA_DEVICE_SETTINGS
-#define TEGRA_DEVICE_SETTINGS	\
-	"stdin=serial\0"	\
-	"stdout=serial,lcd\0"	\
-	"stderr=serial,lcd\0"
-
 /* LCD support */
 #define CONFIG_LCD
 #define CONFIG_PWM_TEGRA
include/configs/paz00.h +0 -6
index 4a74d00..2edb4aa 100644
@@ -72,12 +72,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#undef TEGRA_DEVICE_SETTINGS
-#define TEGRA_DEVICE_SETTINGS	\
-	"stdin=serial\0"	\
-	"stdout=serial,lcd\0"	\
-	"stderr=serial,lcd\0"
-
 /* LCD support */
 #define CONFIG_LCD
 #define CONFIG_PWM_TEGRA
include/configs/tec.h +0 -6
index 815afa6..caeb9cd 100644
@@ -85,12 +85,6 @@
 	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
 	"bootm"
 
-#undef TEGRA_DEVICE_SETTINGS
-#define TEGRA_DEVICE_SETTINGS	\
-	"stdin=serial\0"	\
-	"stdout=serial,lcd\0"	\
-	"stderr=serial,lcd\0"
-
 /* LCD support */
 #define CONFIG_LCD
 #define CONFIG_PWM_TEGRA
Signature · 1 line
1.8.0
#1 lore raw

PATCH 1/1 tegra: remove custom TEGRA_DEVICE_SETTINGS for board files

Quoted 4 lines · Marc Dietrich

TEGRA_DEVICE_SETTINGS lives now in tegra-common-post.h.

This removes custom TEGRA_DEVICE_SETTINGS for all tegra boards providing video output, except seaboard, which was fixed by Stephen already.

Reviewed-by Stephen Warren <[email protected]>

I guess I should have done this too, except I didn't see these since my patches were based on a branch that didn't include u-boot-tegra/next.