Skip to contentSkip to conversation

rtcan: Adding device ID for PEAK PCIe card IPEH-003027

PATCH Applied Wolfgang Grandegger 2 participants 2 messages Dec 4, 2012 – Dec 8, 2012

lore
Share & tools
lore

Wolfgang Grandegger

author
#0 lore raw

PATCH 1/1 rtcan: Adding device ID for PEAK PCIe card IPEH-003027

Signed-off-by Jonathan Bohren <[email protected]>
Acked-by Wolfgang Grandegger <[email protected]>

---

HI Gilles,

second try to the right ml. Could you please apply this patch. It looks good from my point of view.

Thanks,

Wolfgang.

 ksrc/drivers/can/sja1000/rtcan_peak_pci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
ksrc/drivers/can/sja1000/rtcan_peak_pci.c +3 -1
index 53c8fef..b5ad226 100644
@@ -71,13 +71,15 @@ struct rtcan_peak_pci
 #define PITA_MISC        0x1C        // miscellanoes register
 
 #define PEAK_PCI_VENDOR_ID   0x001C  // the PCI device and vendor IDs
-#define PEAK_PCI_DEVICE_ID   0x0001
+#define PEAK_PCI_DEVICE_ID   0x0001  // Device ID for PCI and older PCIe cards
+#define PEAK_PCIE_DEVICE_ID  0x0003  // Device ID for newer PCIe cards (IPEH-003027)
 
 #define PCI_CONFIG_PORT_SIZE 0x1000  // size of the config io-memory
 #define PCI_PORT_SIZE        0x0400  // size of a channel io-memory
 
 static struct pci_device_id peak_pci_tbl[] = {
 	{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{PEAK_PCI_VENDOR_ID, PEAK_PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ }
 };
 MODULE_DEVICE_TABLE (pci, peak_pci_tbl);
Signature · 1 line
1.7.9.5