sdhci: Add sdhci support for spear devices
PATCH RESEND 1/1 sdhci: Add sdhci support for spear devices
Signed-off-by Vipin Kumar <[email protected]>
--- drivers/mmc/Makefile | 1 + drivers/mmc/spear_sdhci.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) create mode 100644 drivers/mmc/spear_sdhci.c
drivers/mmc/Makefile +1 -0
@@ -45,6 +45,7 @@ COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o +COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o
drivers/mmc/spear_sdhci.c new file +44 -0
44 lines not on this page · raw message
Signature · 1 line
1.8.0
PATCH RESEND 1/1 sdhci: Add sdhci support for spear devices
Stefan, Wolfgang,
Can you please add relevant people if not present already in this mail
Regards
Vipin
Quoted 69 lines · Vipin KUMAR
Signed-off-by Vipin Kumar<[email protected]>--- drivers/mmc/Makefile | 1 + drivers/mmc/spear_sdhci.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+)create mode 100644
drivers/mmc/spear_sdhci.cdrivers/mmc/Makefile +1
-0@@ -45,6 +45,7 @@ COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o +COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.odrivers/mmc/spear_sdhci.c new file +44
-0@@ -0,0 +1,44 @@ +/* +* (C) Copyright 2012 +* Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +int spear_sdhci_init (u32 regbase,u32 max_clk,u32 min_clk,u32 quirks) +{ +struct sdhci_host *host =NULL ; + host = (struct sdhci_host *)malloc (sizeof (struct sdhci_host )); +if (!host) { +printf ("sdhci host malloc fail!\n" ); +return 1 ; + } + + host->name ="sdhci" ; + host->ioaddr = (void *)regbase; + host->quirks = quirks; + +if (quirks&SDHCI_QUIRK_REG32_RW ) + host->version =sdhci_readl (host,SDHCI_HOST_VERSION -2 )>>16 ; +else + host->version =sdhci_readw (host,SDHCI_HOST_VERSION ); + +add_sdhci (host, max_clk, min_clk); +return 0 ; +}
PATCH RESEND 1/1 sdhci: Add sdhci support for spear devices
In reply to Vipin KumarQuoted 1 line · Vipin Kumar
Signed-off-by Vipin Kumar <[email protected]>
Looks good, so:
Acked-by Stefan Roese <[email protected]>
Thanks,
Stefan
PATCH RESEND 1/1 sdhci: Add sdhci support for spear devices
In reply to Vipin KumarI didn't test..but it looks fine.
Acked-by Jaehoon Chung <[email protected]>
Quoted 70 lines · Vipin Kumar
Signed-off-by Vipin Kumar <[email protected]>--- drivers/mmc/Makefile | 1 + drivers/mmc/spear_sdhci.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) create mode 100644 drivers/mmc/spear_sdhci.cdrivers/mmc/Makefile +1
-0@@ -45,6 +45,7 @@ COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o +COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.odrivers/mmc/spear_sdhci.c new file +44
-0@@ -0,0 +1,44 @@ +/* +* (C) Copyright 2012 +* Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +int spear_sdhci_init (u32 regbase,u32 max_clk,u32 min_clk,u32 quirks) +{ +struct sdhci_host *host =NULL ; + host = (struct sdhci_host *)malloc (sizeof (struct sdhci_host )); +if (!host) { +printf ("sdhci host malloc fail!\n" ); +return 1 ; + } + + host->name ="sdhci" ; + host->ioaddr = (void *)regbase; + host->quirks = quirks; + +if (quirks &SDHCI_QUIRK_REG32_RW ) + host->version =sdhci_readl (host,SDHCI_HOST_VERSION -2 ) >>16 ; +else + host->version =sdhci_readw (host,SDHCI_HOST_VERSION ); + +add_sdhci (host, max_clk, min_clk); +return 0 ; +}