Skip to contentSkip to conversation

sg3-utils new package.

PATCH New Marek Belisko 4 participants 8 messages Dec 17, 2012 – Dec 20, 2012

lore
Share & tools
lore

Marek Belisko

author
#0 lore raw

PATCH 1/1 sg3-utils new package.

Signed-off-by Marek Belisko <[email protected]>
---
 package/Config.in              |    1 +
 package/sg3_utils/Config.in    |    7 +++++++
 package/sg3_utils/sg3_utils.mk |   10 ++++++++++
 3 files changed, 18 insertions(+)
 create mode 100644 package/sg3_utils/Config.in
 create mode 100644 package/sg3_utils/sg3_utils.mk
package/Config.in +1 -0
index d6af55d..269b3ff 100644
@@ -253,6 +253,7 @@ source "package/rng-tools/Config.in"
 source "package/sane-backends/Config.in"
 source "package/sdparm/Config.in"
 source "package/setserial/Config.in"
+source "package/sg3_utils/Config.in"
 source "package/smartmontools/Config.in"
 source "package/snowball-hdmiservice/Config.in"
 source "package/sredird/Config.in"
package/sg3_utils/Config.in new file +7 -0
new file mode 100644
index 0000000..1d2ab2a
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_SG3_UTILS
+	bool "sg3_utils"
+	help
+	  sg3_utils is a package of utilities that send SCSI commands to the
+	  given <scsi_device> via a SCSI pass through.
+
+	  http://sg.danny.cz/sg/
package/sg3_utils/sg3_utils.mk new file +10 -0
new file mode 100644
index 0000000..2eba3d3
@@ -0,0 +1,10 @@
+#############################################################
+#
+# sg3_utils
+#
+#############################################################
+SG3_UTILS_VERSION = 1.34
+SG3_UTILS_SITE = http://sg.danny.cz/sg/p/
+SG3_UTILS_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/1 sg3-utils new package.

Quoted 1 line · Marek Belisko
Signed-off-by Marek Belisko<[email protected]>

[snip]

package/sg3_utils/Config.in line 2

Quoted 8 lines
package/sg3_utils/Config.in new file +2 -0
new file mode 100644
index 0000000..1d2ab2a
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_SG3_UTILS
+	bool "sg3_utils"

depends on BR2_LARGEFILE
depends on BR2_TOOLCHAIN_HAS_THREADS
(actually only sgp_dd needs threads so that could be patched out in the
Makefile).

Not sure about IPv6.

Otherwise, looks good.

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                               arnout at mind be
Senior Embedded Software Architect                 +32-16-286540
Essensium/Mind                                     http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium                BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#2 lore raw

PATCH 1/1 sg3-utils new package.

In reply to Marek Belisko

Dear Marek Belisko,

Quoted 1 line · Marek Belisko

+SG3_UTILS_INSTALL_STAGING = YES

Hum, why is this needed? Does sg3_utils installs some libraries or headers that are useful for other packages?

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#3 lore raw

PATCH 1/1 sg3-utils new package.

Hi Thomas,

Quoted 8 lines · Thomas Petazzoni

Dear Marek Belisko,

Quoted 1 line · Marek Belisko

+SG3_UTILS_INSTALL_STAGING = YES

Hum, why is this needed? Does sg3_utils installs some libraries or headers that are useful for other packages?

I'm working on adding udisks to buildroot and udisks have dependency on sg3-utils library so this is the reason why installing to staging. I've read somewhere on ML you was working also on udisks package. Was it successful?

Quoted 9 lines

Thanks,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Cheers,

mbe

Signature · 10 lines
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
#4 lore raw

PATCH 1/1 sg3-utils new package.

Dear Belisko Marek,

Quoted 4 lines · Belisko Marek
Quoted 2 lines

Hum, why is this needed? Does sg3_utils installs some libraries or headers that are useful for other packages?

I'm working on adding udisks to buildroot and udisks have dependency on sg3-utils library so this is the reason why installing to staging.

Ok. A comment just before the _INSTALL_STAGING line would be useful, then, because for a "utils" package, we don't necessarily expect to have a library in it.

Quoted 2 lines

I've read somewhere on ML you was working also on udisks package. Was it successful?

It was a looong time ago. I think I managed to get udisks to build, but I hadn't had the time to do some real testing with it: I was first doing some testing of polkit, which is a dependency of udisks.

I've put online the 3 patches I had done at that time (note that they are old: they still use the old AUTOTARGETS macro name), see:
http://free-electrons.com/~thomas/pub/udisks-buildroot/

Best regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#5 lore raw

PATCH 1/1 sg3-utils new package.

Hi Thomas,

Quoted 16 lines · Thomas Petazzoni

Dear Belisko Marek,

Quoted 4 lines · Belisko Marek
Quoted 2 lines

Hum, why is this needed? Does sg3_utils installs some libraries or headers that are useful for other packages?

I'm working on adding udisks to buildroot and udisks have dependency on sg3-utils library so this is the reason why installing to staging.

Ok. A comment just before the _INSTALL_STAGING line would be useful, then, because for a "utils" package, we don't necessarily expect to have a library in it.

Quoted 2 lines

I've read somewhere on ML you was working also on udisks package. Was it successful?

Quoted 7 lines

It was a looong time ago. I think I managed to get udisks to build, but I hadn't had the time to do some real testing with it: I was first doing some testing of polkit, which is a dependency of udisks.

I've put online the 3 patches I had done at that time (note that they are old: they still use the old AUTOTARGETS macro name), see:
http://free-electrons.com/~thomas/pub/udisks-buildroot/

Thanks for patches. I made small update and I can compile polkit without problems but I have still problems with udisks.

Basically udisks have only autogen.sh script and I was trying to use:
UDISKS_AUTORECONF = YES macro.

With this change it fails during autoreconfiguring:

configure.ac:13: the top level
configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... configure.ac:225: the top level
configure:14234: error: possibly undefined macro: AM_NLS
If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation.

Am I missing some dependency?

Quoted 9 lines

Best regards,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Thanks,

marek

Signature · 10 lines
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
#6 lore raw

PATCH 1/1 sg3-utils new package.

Dear Belisko Marek,

Quoted 9 lines · Belisko Marek

configure.ac:13: the top level
configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... configure.ac:225: the top level
configure:14234: error: possibly undefined macro: AM_NLS
If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation.

Am I missing some dependency?

I guess this macro is installed by gettext, but not sure.

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#7 lore raw

PATCH 1/1 sg3-utils new package.

Hi Thomas,

Quoted 12 lines · Thomas Petazzoni

Dear Belisko Marek,

Quoted 8 lines · Belisko Marek

configure.ac:13: the top level
configure.ac:225: warning: AM_NLS is m4_require'd but not m4_defun'd aclocal.m4:1204: IT_PROG_INTLTOOL is expanded from... configure.ac:225: the top level
configure:14234: error: possibly undefined macro: AM_NLS
If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation.

Quoted 3 lines
Quoted 1 line

Am I missing some dependency?

I guess this macro is installed by gettext, but not sure.

Hmm it was my mistake somehow. I proceed forward but now have troubles in configuration phase:
checking for LIBPARTED... yes
checking for DEVMAPPER... no
configure: error: Package requirements (devmapper >= 1.02) were not met:

I choose BR2_PACKAGE_LVM2 and aso add dependency to lvm2 but error still exists. I was looking to stagin directory and libdevmapper is is /usr/lib. Not sure why it pkg-config cannot
find. Ideas?

Quoted 7 lines

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Thanks in advance,

Marek

Signature · 10 lines
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com