BLE multiple connection - Recv() issue

hi,
I have 2 LE links A1 to B and A2 to C ( A1 and A2 are client
running at same device )
when i starts sending data from B to A1 its happening and A1 is receiving properly . But the very next moment i started data transfer from C to A2 , A1 stops recievng . I could see data from B to A1 reaches upto hci layer(hcidump) , and then routed to A2 l2cap recv() . Here i used recv() and send() system calls for data transfer with l2cap socket (cid 0x04 and psm 0x00) .Bind() is done at both client and server side . Is it possible for a BLE device to recv data simultaneously from other two devices .????? .

Thanks & Regards

 AJAY KV
 GlobalEdge software Ltd
 8892753703

begin:vcard
fn:AJAY KV
n:;AJAY
tel;cell:8892753703
version:2.1
end:vcard

hi,
I have 2 LE links A1 to B and A2 to C ( A1 and A2 are client
running at same device )
when i starts sending data from B to A1 its happening and A1 is receiving properly . But the very next moment i started data transfer from C to A2 , A1 stops recievng . I could see data from B to A1 reaches upto hci layer(hcidump) , and then routed to A2 l2cap recv() . Here i used recv() and send() system calls for data transfer with l2cap socket (cid 0x04 and psm 0x00) .Bind() is done at both client and server side . Is it possible for a BLE device to recv data simultaneously from other two devices .????? .

Thanks & Regards

  AJAY KV
  GlobalEdge software Ltd
  8892753703

begin:vcard
fn:AJAY KV
n:;AJAY
tel;cell:8892753703
version:2.1
end:vcard