One last tweak for perfection.
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
Quoted 11 lines · Ove Karlsen
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue to debate for me, 90 hz is sufficient, and only to userspace, right? So yea, forget the talk on HZ.
Peace Be With You.
Quoted 7 lines · Ove Karlsen
Quoted 6 lines · Ove Karlsen
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see http://paradoxuncreated.com/Blog/wordpress/?p=2268
Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
Quoted 8 lines
Quoted 5 lines
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue to debate for me, 90 hz is sufficient, and only to userspace, right? So yea, forget the talk on HZ.
Peace Be With You.
And "synced to hz" with regards to video, is the screen hz ofcourse, not kernel. Peace Be With You.
Quoted 22 lines · Ove Karlsen
Quoted 21 lines · Ove Karlsen
Quoted 20 lines · Ove Karlsen
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see
http://paradoxuncreated.com/Blog/wordpress/?p=2268Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue to debate for me, 90 hz is sufficient, and only to userspace, right? So yea, forget the talk on HZ.
Peace Be With You.
And "synced to hz" with regards to video, is the screen hz ofcourse, not kernel.
Peace Be With You.
(resendt due to lkml rejecting html mail)
Quoted 32 lines · Ove Karlsen
Quoted 22 lines · Ove Karlsen
Quoted 21 lines · Ove Karlsen
Quoted 20 lines · Ove Karlsen
What kernelthreads _needs_ to run? So I can put them on max pri renice, along with reniced X and app. And everything else on idle priority. So to make the app run at max efficiency, and not be starved by kernelthreads waiting. (Or any other consideration, for giving maximal cpu to app. Even small tweaks.)
To read my research so far, (and I have done much, about 2 years of tweakin´ on and off.) Please see
http://paradoxuncreated.com/Blog/wordpress/?p=2268Main points, no highres timer, 90hz timer, + a lot of smaller tweaks. This makes an amazing linux-desktop, for gaming, video and audio. The popular computer for everyman. Also boosts performance, for resource-constrained systems.
For more advanced hacking, one could also get in there, and make several HZ timers, extremely low ones, for the components who only require that, and 90hz for video-components, for instance (low video/frame jitter), and higher if anything should require that.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Also system-wide, software should be synced to hz, if required for lowest jitter, such as animations and videoplayers, and videoplayers automatically change refresh rate to a multiple of video framerate.
Peace Be With You.
PS: I forgot the realtime sincs of drivers. HZ is really not an issue to debate for me, 90 hz is sufficient, and only to userspace, right? So yea, forget the talk on HZ.
Quoted 9 lines
Peace Be With You.
And "synced to hz" with regards to video, is the screen hz ofcourse, not kernel.
Peace Be With You.
(resendt due to lkml rejecting html mail)
Ok, one last argument on HZ. Screenrefresh updates HZ counter, or similar idea to get vsynced HZ (minimal hz needed). Ofcourse it must work better than the 90hz optimal on current timing system. A screen refresh of 72.7 seems optimal, (quiet non-noisy, non-flickering), and so Hz could be reduced to 72.7. Peace Be With You!