Skip to contentSkip to conversation

tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

PATCH Superseded Fabio Fantoni 2 participants 4 messages Jan 17, 2013 – Jan 18, 2013

v6 of 11 Superseded Latest is v11 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/1 tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

Usage:

  qxl=1|0

Changes from v5 of Zhou Peng:
- Some improvements and make videoram configurable.

This patch is based on staging branch updated today with also this patch applied:
tools/libxl: Improve videoram setting

---
 docs/man/xl.cfg.pod.5       |   11 +++++++++++
 tools/libxl/libxl_create.c  |   12 ++++++++++++
 tools/libxl/libxl_dm.c      |   15 +++++++++++++++
 tools/libxl/libxl_types.idl |    1 +
 tools/libxl/xl_cmdimpl.c    |    4 ++++
 5 files changed, 43 insertions(+)
docs/man/xl.cfg.pod.5 +11 -0
index 9c5cdcd..a0f0dc3 100644
@@ -984,6 +984,9 @@ the amount of video ram is fixed at 4MB which is sufficient
 for 1024x768 at 32 bpp and videoram option is currently working
 only when using the upstream qemu-xen device-model.
 
+For B<qxl> vga, the default is both default and minimal 128MB.
+If B<videoram> is set less than 128MB, an error will be triggered.
+
 =item B<stdvga=BOOLEAN>
 
 Select a standard VGA card with VBE (VESA BIOS Extensions) as the
@@ -992,6 +995,14 @@ a Cirrus Logic GD5446 VGA card. If your guest supports VBE 2.0 or
 later (e.g. Windows XP onwards) then you should enable this.
 stdvga supports more video ram and bigger resolutions than Cirrus.
 
+=item B<qxl=BOOLEAN>
+
+Select a QXL VGA card as the emulated graphics device.
+In general, QXL should work with the Spice remote display protocol
+for acceleration, and QXL driver is necessary in guest in this case.
+QXL can also work with the VNC protocol, but it will be like a standard
+VGA without acceleration.
+
 =item B<vnc=BOOLEAN>
 
 Allow access to the display via the VNC protocol.  This enables the
tools/libxl/libxl_create.c +12 -0
index 802209e..cdcf263 100644
@@ -197,6 +197,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
     case LIBXL_DOMAIN_TYPE_HVM:
         if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->shadow_memkb = 0;
+
+        if (b_info->device_model_version == LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN
+            && b_info->u.hvm.vga.kind == LIBXL_VGA_INTERFACE_TYPE_QXL) {
+            if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT) {
+                b_info->video_memkb = (128 * 1024);
+            }else if (b_info->video_memkb < (128 * 1024)) {
+                LIBXL__LOG(CTX, LIBXL__LOG_ERROR,
+                    "128 Mib videoram is the minimum for qxl default");
+                return ERROR_INVAL;
+            }
+        }
+
         if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->video_memkb = 8 * 1024;
         else if (b_info->video_memkb < 8192){
tools/libxl/libxl_dm.c +15 -0
index d719130..5cecaae 100644
@@ -181,6 +181,8 @@ static char ** libxl__build_device_model_args_old(libxl__gc *gc,
             break;
         case LIBXL_VGA_INTERFACE_TYPE_CIRRUS:
             break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            break;
         }
 
         if (b_info->u.hvm.boot) {
@@ -437,6 +439,19 @@ static char ** libxl__build_device_model_args_new(libxl__gc *gc,
                 NULL);
             }
             break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            flexarray_vappend(dm_args, "-vga", "qxl", NULL);
+            if (b_info->video_memkb) {
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.vram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.ram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+            }
+            break;
         }
 
         if (b_info->u.hvm.boot) {
tools/libxl/libxl_types.idl +1 -0
index acc4bc9..3f90f12 100644
@@ -130,6 +130,7 @@ libxl_shutdown_reason = Enumeration("shutdown_reason", [
 libxl_vga_interface_type = Enumeration("vga_interface_type", [
     (1, "CIRRUS"),
     (2, "STD"),
+    (3, "QXL"),
     ], init_val = 0)
 
 #
tools/libxl/xl_cmdimpl.c +0 -0
index e964bf1..80c36e4 100644
@@ -1473,6 +1473,10 @@ skip_vfb:
             b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_STD :

LIBXL_VGA_INTERFACE_TYPE_CIRRUS;

+ if (!xlu_cfg_get_long(config, "qxl", &l, 0))
+ b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_QXL :
+ LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+

         xlu_cfg_get_defbool(config, "vnc", &b_info->u.hvm.vnc.enable, 0);
         xlu_cfg_replace_string (config, "vnclisten",
                                 &b_info->u.hvm.vnc.listen, 0);
Signature · 1 line
1.7.9.5

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#1 lore raw
Quoted 5 lines · Fabio Fantoni

tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

Usage:

  qxl=1|0
Quoted 8 lines

Changes from v5 of Zhou Peng:
- Some improvements and make videoram configurable.

This patch is based on staging branch updated today with also this patch applied:
tools/libxl: Improve videoram setting

Thanks for the patch!
You should add Zhou Peng's signed-off-by because the code originally comes from him

Quoted 84 lines
 docs/man/xl.cfg.pod.5       |   11 +++++++++++
 tools/libxl/libxl_create.c  |   12 ++++++++++++
 tools/libxl/libxl_dm.c      |   15 +++++++++++++++
 tools/libxl/libxl_types.idl |    1 +
 tools/libxl/xl_cmdimpl.c    |    4 ++++
 5 files changed, 43 insertions(+)
docs/man/xl.cfg.pod.5 +0 -0
index 9c5cdcd..a0f0dc3 100644
@@ -984,6 +984,9 @@ the amount of video ram is fixed at 4MB which is

sufficient
for 1024x768 at 32 bpp and videoram option is currently working only when using the upstream qemu-xen device-model.

docs/man/xl.cfg.pod.5 +3 -0
+For B<qxl> vga, the default is both default and minimal 128MB.
+If B<videoram> is set less than 128MB, an error will be triggered.
+
 =item B<stdvga=BOOLEAN>
 
 Select a standard VGA card with VBE (VESA BIOS Extensions) as the
@@ -992,6 +995,14 @@ a Cirrus Logic GD5446 VGA card. If your guest supports

VBE 2.0 or
later (e.g. Windows XP onwards) then you should enable this. stdvga supports more video ram and bigger resolutions than Cirrus.

+=item B<qxl=BOOLEAN>

docs/man/xl.cfg.pod.5 +7 -0
+
+Select a QXL VGA card as the emulated graphics device.
+In general, QXL should work with the Spice remote display protocol
+for acceleration, and QXL driver is necessary in guest in this case.
+QXL can also work with the VNC protocol, but it will be like a standard
+VGA without acceleration.
+
 =item B<vnc=BOOLEAN>
 
 Allow access to the display via the VNC protocol.  This enables the
tools/libxl/libxl_create.c +2 -0
index 802209e..cdcf263 100644
@@ -197,6 +197,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
     case LIBXL_DOMAIN_TYPE_HVM:
         if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->shadow_memkb = 0;
+
+        if (b_info->device_model_version ==

LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN

tools/libxl/libxl_create.c +10 -0
+            && b_info->u.hvm.vga.kind == LIBXL_VGA_INTERFACE_TYPE_QXL) {
+            if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT) {
+                b_info->video_memkb = (128 * 1024);
+            }else if (b_info->video_memkb < (128 * 1024)) {
+                LIBXL__LOG(CTX, LIBXL__LOG_ERROR,
+                    "128 Mib videoram is the minimum for qxl default");
+                return ERROR_INVAL;
+            }
+        }
+
         if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
             b_info->video_memkb = 8 * 1024;
         else if (b_info->video_memkb < 8192){
tools/libxl/libxl_dm.c +2 -0
index d719130..5cecaae 100644
@@ -181,6 +181,8 @@ static char **
 libxl__build_device_model_args_old(libxl__gc *gc,
             break;
         case LIBXL_VGA_INTERFACE_TYPE_CIRRUS:
             break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            break;
         }
 
         if (b_info->u.hvm.boot) {
tools/libxl/libxl_dm.c +3 -0
@@ -437,6 +439,19 @@ static char **
 libxl__build_device_model_args_new(libxl__gc *gc,
                 NULL);
             }
             break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            flexarray_vappend(dm_args, "-vga", "qxl", NULL);
+            if (b_info->video_memkb) {

tools/libxl/libxl_dm.c static char ** · line 455

Quoted 10 lines
tools/libxl/libxl_dm.c +10 -0
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.vram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.ram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+            }
+            break;

why twice?

Quoted 20 lines
tools/libxl/libxl_dm.c +0 -0
         }
 
         if (b_info->u.hvm.boot) {
tools/libxl/libxl_types.idl +1 -0
index acc4bc9..3f90f12 100644
@@ -130,6 +130,7 @@ libxl_shutdown_reason = Enumeration("shutdown_reason", [
 libxl_vga_interface_type = Enumeration("vga_interface_type", [
     (1, "CIRRUS"),
     (2, "STD"),
+    (3, "QXL"),
     ], init_val = 0)
 
 #
tools/libxl/xl_cmdimpl.c +0 -0
index e964bf1..80c36e4 100644

tools/libxl/xl_cmdimpl.c skip_vfb: · line 1482

Quoted 10 lines
tools/libxl/xl_cmdimpl.c +4 -0
@@ -1473,6 +1473,10 @@ skip_vfb:
             b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_STD :
 LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
 
+        if (!xlu_cfg_get_long(config, "qxl", &l, 0))
+            b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_QXL :
+ LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+
         xlu_cfg_get_defbool(config, "vnc", &b_info->u.hvm.vnc.enable, 0);
         xlu_cfg_replace_string (config, "vnclisten",
                                 &b_info->u.hvm.vnc.listen, 0);

this is going to overwrite the previous stdvga setting if:

stdvga=1
qxl=0

#2 lore raw

Il 17/01/2013 18:24, Stefano Stabellini ha scritto:

Quoted 147 lines · Fabio Fantoni
Quoted 5 lines

tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

Usage:

   qxl=1|0
Quoted 8 lines

Changes from v5 of Zhou Peng:
- Some improvements and make videoram configurable.

This patch is based on staging branch updated today with also this patch applied:
tools/libxl: Improve videoram setting

Thanks for the patch!
You should add Zhou Peng's signed-off-by because the code originally comes from him

Quoted 84 lines
  docs/man/xl.cfg.pod.5       |   11 +++++++++++
  tools/libxl/libxl_create.c  |   12 ++++++++++++
  tools/libxl/libxl_dm.c      |   15 +++++++++++++++
  tools/libxl/libxl_types.idl |    1 +
  tools/libxl/xl_cmdimpl.c    |    4 ++++
  5 files changed, 43 insertions(+)
docs/man/xl.cfg.pod.5 +0 -0
index 9c5cdcd..a0f0dc3 100644
@@ -984,6 +984,9 @@ the amount of video ram is fixed at 4MB which is

sufficient
for 1024x768 at 32 bpp and videoram option is currently working only when using the upstream qemu-xen device-model.

docs/man/xl.cfg.pod.5 +3 -0
+For B<qxl> vga, the default is both default and minimal 128MB.
+If B<videoram> is set less than 128MB, an error will be triggered.
+
  =item B<stdvga=BOOLEAN>
 
  Select a standard VGA card with VBE (VESA BIOS Extensions) as the
@@ -992,6 +995,14 @@ a Cirrus Logic GD5446 VGA card. If your guest supports

VBE 2.0 or
later (e.g. Windows XP onwards) then you should enable this. stdvga supports more video ram and bigger resolutions than Cirrus.

+=item B<qxl=BOOLEAN>

docs/man/xl.cfg.pod.5 +7 -0
+
+Select a QXL VGA card as the emulated graphics device.
+In general, QXL should work with the Spice remote display protocol
+for acceleration, and QXL driver is necessary in guest in this case.
+QXL can also work with the VNC protocol, but it will be like a standard
+VGA without acceleration.
+
  =item B<vnc=BOOLEAN>
 
  Allow access to the display via the VNC protocol.  This enables the
tools/libxl/libxl_create.c +2 -0
index 802209e..cdcf263 100644
@@ -197,6 +197,18 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
      case LIBXL_DOMAIN_TYPE_HVM:
          if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
              b_info->shadow_memkb = 0;
+
+        if (b_info->device_model_version ==

LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN

tools/libxl/libxl_create.c +10 -0
+            && b_info->u.hvm.vga.kind == LIBXL_VGA_INTERFACE_TYPE_QXL) {
+            if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT) {
+                b_info->video_memkb = (128 * 1024);
+            }else if (b_info->video_memkb < (128 * 1024)) {
+                LIBXL__LOG(CTX, LIBXL__LOG_ERROR,
+                    "128 Mib videoram is the minimum for qxl default");
+                return ERROR_INVAL;
+            }
+        }
+
          if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
              b_info->video_memkb = 8 * 1024;
          else if (b_info->video_memkb < 8192){
tools/libxl/libxl_dm.c +2 -0
index d719130..5cecaae 100644
@@ -181,6 +181,8 @@ static char **
 libxl__build_device_model_args_old(libxl__gc *gc,
              break;
          case LIBXL_VGA_INTERFACE_TYPE_CIRRUS:
              break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            break;
          }
 
          if (b_info->u.hvm.boot) {
tools/libxl/libxl_dm.c +3 -0
@@ -437,6 +439,19 @@ static char **
 libxl__build_device_model_args_new(libxl__gc *gc,
                  NULL);
              }
              break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            flexarray_vappend(dm_args, "-vga", "qxl", NULL);
+            if (b_info->video_memkb) {

tools/libxl/libxl_dm.c static char ** · line 455

Quoted 10 lines
tools/libxl/libxl_dm.c +10 -0
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.vram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.ram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+            }
+            break;

why twice?

Quoted 20 lines
tools/libxl/libxl_dm.c +0 -0
          }
 
          if (b_info->u.hvm.boot) {
tools/libxl/libxl_types.idl +1 -0
index acc4bc9..3f90f12 100644
@@ -130,6 +130,7 @@ libxl_shutdown_reason = Enumeration("shutdown_reason", [
  libxl_vga_interface_type = Enumeration("vga_interface_type", [
      (1, "CIRRUS"),
      (2, "STD"),
+    (3, "QXL"),
      ], init_val = 0)
 
  #
tools/libxl/xl_cmdimpl.c +0 -0
index e964bf1..80c36e4 100644

tools/libxl/xl_cmdimpl.c skip_vfb: · line 1482

Quoted 10 lines
tools/libxl/xl_cmdimpl.c +4 -0
@@ -1473,6 +1473,10 @@ skip_vfb:
              b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_STD :
 LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
 
+        if (!xlu_cfg_get_long(config, "qxl", &l, 0))
+            b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_QXL :
+ LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+
          xlu_cfg_get_defbool(config, "vnc", &b_info->u.hvm.vnc.enable, 0);
          xlu_cfg_replace_string (config, "vnclisten",
                                  &b_info->u.hvm.vnc.listen, 0);

this is going to overwrite the previous stdvga setting if:

Quoted 10 lines

stdvga=1
qxl=0

-----
Nessun virus nel messaggio.
Controllato da AVG - www.avg.com
Versione: 2013.0.2890 / Database dei virus: 2638/6037 - Data di rilascio: 16/01/2013

About Zhou Peng's signoff, I have seen patch on site without mail complete, now I found is address on old mail and I'll add it on new version of patch.

About twice global parameter for videoram should be correct because qxl has 2 ram regions. In this thread there is a post that probably explain all good:
http://en.usenet.digipedia.org/thread/11782/83741/

Quoted 11 lines

The qxl device has two large memory regions:

Region #1 is called "ram" and is mapped to PCI bar 0. This is again splitted into three parts: The framebuffer at the start, the command rings at the end, and storage area for spice rendering commands and image data inbetween.

Region #2 is called "vram". This is storage for images, called "surfaces" in spice. Surfaces can be both source and target for spice rendering operations. X11 can store offscreen pixmaps there for example. Once qxl gets 3D support surfaces can also be used for textures.

For other details read complete post on link before.

About qxl and stdvga setting I'll try to found solution for all combinations. For now I don't know what can I do if both are enabled.

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xen.org/xen-devel

#3 lore raw
Quoted 177 lines · Fabio Fantoni

Il 17/01/2013 18:24, Stefano Stabellini ha scritto:

Quoted 155 lines · Fabio Fantoni
Quoted 5 lines

tools/libxl: Add qxl vga interface support for upstream-qemu-xen.

Usage:

   qxl=1|0
Quoted 8 lines

Changes from v5 of Zhou Peng:
- Some improvements and make videoram configurable.

This patch is based on staging branch updated today with also this patch applied:
tools/libxl: Improve videoram setting

Thanks for the patch!
You should add Zhou Peng's signed-off-by because the code originally comes from him

Quoted 86 lines
  docs/man/xl.cfg.pod.5       |   11 +++++++++++
  tools/libxl/libxl_create.c  |   12 ++++++++++++
  tools/libxl/libxl_dm.c      |   15 +++++++++++++++
  tools/libxl/libxl_types.idl |    1 +
  tools/libxl/xl_cmdimpl.c    |    4 ++++
  5 files changed, 43 insertions(+)
docs/man/xl.cfg.pod.5 +0 -0
index 9c5cdcd..a0f0dc3 100644
@@ -984,6 +984,9 @@ the amount of video ram is fixed at 4MB which is

sufficient
for 1024x768 at 32 bpp and videoram option is currently working only when using the upstream qemu-xen device-model.

docs/man/xl.cfg.pod.5 +3 -0
+For B<qxl> vga, the default is both default and minimal 128MB.
+If B<videoram> is set less than 128MB, an error will be triggered.
+
  =item B<stdvga=BOOLEAN>
 
  Select a standard VGA card with VBE (VESA BIOS Extensions) as the
@@ -992,6 +995,14 @@ a Cirrus Logic GD5446 VGA card. If your guest

supports
VBE 2.0 or
later (e.g. Windows XP onwards) then you should enable this. stdvga supports more video ram and bigger resolutions than Cirrus.

+=item B<qxl=BOOLEAN>

docs/man/xl.cfg.pod.5 +7 -0
+
+Select a QXL VGA card as the emulated graphics device.
+In general, QXL should work with the Spice remote display protocol
+for acceleration, and QXL driver is necessary in guest in this case.
+QXL can also work with the VNC protocol, but it will be like a standard
+VGA without acceleration.
+
  =item B<vnc=BOOLEAN>
 
  Allow access to the display via the VNC protocol.  This enables the
tools/libxl/libxl_create.c +2 -0
index 802209e..cdcf263 100644
@@ -197,6 +197,18 @@ int libxl__domain_build_info_setdefault(libxl__gc
 *gc,
      case LIBXL_DOMAIN_TYPE_HVM:
          if (b_info->shadow_memkb == LIBXL_MEMKB_DEFAULT)
              b_info->shadow_memkb = 0;
+
+        if (b_info->device_model_version ==

LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN

tools/libxl/libxl_create.c +10 -0
+            && b_info->u.hvm.vga.kind == LIBXL_VGA_INTERFACE_TYPE_QXL) {
+            if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT) {
+                b_info->video_memkb = (128 * 1024);
+            }else if (b_info->video_memkb < (128 * 1024)) {
+                LIBXL__LOG(CTX, LIBXL__LOG_ERROR,
+                    "128 Mib videoram is the minimum for qxl default");
+                return ERROR_INVAL;
+            }
+        }
+
          if (b_info->video_memkb == LIBXL_MEMKB_DEFAULT)
              b_info->video_memkb = 8 * 1024;
          else if (b_info->video_memkb < 8192){
tools/libxl/libxl_dm.c +2 -0
index d719130..5cecaae 100644
@@ -181,6 +181,8 @@ static char **
 libxl__build_device_model_args_old(libxl__gc *gc,
              break;
          case LIBXL_VGA_INTERFACE_TYPE_CIRRUS:
              break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            break;
          }
 
          if (b_info->u.hvm.boot) {
tools/libxl/libxl_dm.c +3 -0
@@ -437,6 +439,19 @@ static char **
 libxl__build_device_model_args_new(libxl__gc *gc,
                  NULL);
              }
              break;
+        case LIBXL_VGA_INTERFACE_TYPE_QXL:
+            flexarray_vappend(dm_args, "-vga", "qxl", NULL);
+            if (b_info->video_memkb) {

tools/libxl/libxl_dm.c static char ** · line 455

Quoted 10 lines
tools/libxl/libxl_dm.c +10 -0
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.vram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+                flexarray_vappend(dm_args, "-global",
+                libxl__sprintf(gc, "qxl-vga.ram_size_mb=%d",
+                libxl__sizekb_to_mb(b_info->video_memkb/2)),
+                NULL);
+            }
+            break;

why twice?

Quoted 31 lines
tools/libxl/libxl_dm.c +0 -0
          }
 
          if (b_info->u.hvm.boot) {
tools/libxl/libxl_types.idl +0 -0
index acc4bc9..3f90f12 100644
@@ -130,6 +130,7 @@ libxl_shutdown_reason = Enumeration("shutdown_reason",

[
libxl_vga_interface_type = Enumeration("vga_interface_type", [

      (1, "CIRRUS"),
      (2, "STD"),
tools/libxl/libxl_types.idl +1 -0
+    (3, "QXL"),
      ], init_val = 0)
 
  #
tools/libxl/xl_cmdimpl.c +4 -0
index e964bf1..80c36e4 100644
@@ -1473,6 +1473,10 @@ skip_vfb:
              b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_STD :
 LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
 
+        if (!xlu_cfg_get_long(config, "qxl", &l, 0))
+            b_info->u.hvm.vga.kind = l ? LIBXL_VGA_INTERFACE_TYPE_QXL :
+ LIBXL_VGA_INTERFACE_TYPE_CIRRUS;
+
          xlu_cfg_get_defbool(config, "vnc", &b_info->u.hvm.vnc.enable,
 0);
          xlu_cfg_replace_string (config, "vnclisten",
Quoted 1 line
                                  &b_info->u.hvm.vnc.listen, 0);

this is going to overwrite the previous stdvga setting if:

stdvga=1
qxl=0

Quoted 7 lines

-----
Nessun virus nel messaggio.
Controllato da AVG - www.avg.com
Versione: 2013.0.2890 / Database dei virus: 2638/6037 - Data di rilascio:
16/01/2013

About Zhou Peng's signoff, I have seen patch on site without mail complete, now I found is address on old mail and I'll add it on new version of patch.

About twice global parameter for videoram should be correct because qxl has 2 ram regions.
In this thread there is a post that probably explain all good:
http://en.usenet.digipedia.org/thread/11782/83741/

Quoted 7 lines

The qxl device has two large memory regions:

Region #1 is called "ram" and is mapped to PCI bar 0. This is again splitted into three parts: The framebuffer at the start, the command rings at the end, and storage area for spice rendering commands and image data inbetween.

Quoted 5 lines
Quoted 4 lines

Region #2 is called "vram". This is storage for images, called "surfaces" in spice. Surfaces can be both source and target for spice rendering operations. X11 can store offscreen pixmaps there for example. Once qxl gets 3D support surfaces can also be used for textures.

For other details read complete post on link before.

OK, it seems sensible.

Quoted 2 lines

About qxl and stdvga setting I'll try to found solution for all combinations. For now I don't know what can I do if both are enabled.

Don't worry about that: it is clearly a configuration error. But stdvga=1 and qxl=0 is not a configuration error so it has to work properly