ISDN patches for net-next
Subsystems (2)
cover ISDN patches for net-next
Karsten, David,
here's a series of six patches to the ISDN subsystem. Please consider for application to net-next. The last one should also go into -stable and is tagged "CC: stable" accordingly.
Thanks,
Tilman
Tilman Schmidt (6):
isdn/divert: fix readability damage isdn/gigaset: leave DLE mode before hanging up isdn/gigaset: beautify interface.c isdn/gigaset: beautify common.c isdn/gigaset: beautify ev-layer.c isdn/gigaset: fix zero size border case in debug dump
drivers/isdn/divert/divert_init.c | 33 +- drivers/isdn/divert/isdn_divert.c | 423 ++++++++++++++++++-------------------- drivers/isdn/divert/isdn_divert.h | 28 +- drivers/isdn/gigaset/capi.c | 2 drivers/isdn/gigaset/common.c | 31 -- drivers/isdn/gigaset/ev-layer.c | 124 +++++------ drivers/isdn/gigaset/gigaset.h | 9 drivers/isdn/gigaset/interface.c | 46 +--- 8 files changed, 332 insertions(+), 364 deletions(-)
PATCH 1/6 isdn/divert: fix readability damage
Fix up some of the readibility deterioration caused by last year's ISDN whitespace coding style cleanup.
Note that the checkpatch complaints all apply to the state of the source before this patch as well, and in many cases even more so.
--- drivers/isdn/divert/divert_init.c | 33 ++-- drivers/isdn/divert/isdn_divert.c | 423 ++++++++++++++++++------------------- drivers/isdn/divert/isdn_divert.h | 28 ++-- 3 files changed, 237 insertions(+), 247 deletions(-)
drivers/isdn/divert/divert_init.c +17 -16
@@ -22,13 +22,13 @@ MODULE_LICENSE("GPL");/****************************************/ /* structure containing interface to hl */ /****************************************/ -isdn_divert_if divert_if = -{DIVERT_IF_MAGIC ,/* magic value */ -DIVERT_CMD_REG ,/* register cmd */ - ll_callback,/* callback routine from ll */ -NULL ,/* command still not specified */ -NULL ,/* drv_to_name */ -NULL ,/* name_to_drv */ +isdn_divert_if divert_if = { +DIVERT_IF_MAGIC ,/* magic value */ +DIVERT_CMD_REG ,/* register cmd */ + ll_callback,/* callback routine from ll */ +NULL ,/* command still not specified */ +NULL ,/* drv_to_name */ +NULL ,/* name_to_drv */ };/*************************/
@@ -36,14 +36,15 @@ isdn_divert_if divert_if =/* no cmd line parms */ /*************************/ static int __init divert_init (void ) -{int i; +{ +int i; -if (divert_dev_init ()) - {printk (KERN_WARNING "dss1_divert: cannot install device, not loaded\n" ); +if (divert_dev_init ()) { +printk (KERN_WARNING "dss1_divert: cannot install device, not loaded\n" );return (-EIO ); } -if ((i =DIVERT_REG_NAME (&divert_if)) !=DIVERT_NO_ERR ) - {divert_dev_deinit (); +if ((i =DIVERT_REG_NAME (&divert_if)) !=DIVERT_NO_ERR ) { +divert_dev_deinit ();printk (KERN_WARNING "dss1_divert: error %d registering module, not loaded\n" , i);return (-EIO ); }
@@ -61,13 +62,13 @@ static void __exit divert_exit(void)spin_lock_irqsave (&divert_lock, flags); divert_if.cmd =DIVERT_CMD_REL ;/* release */ -if ((i =DIVERT_REG_NAME (&divert_if)) !=DIVERT_NO_ERR ) - {printk (KERN_WARNING "dss1_divert: error %d releasing module\n" , i); +if ((i =DIVERT_REG_NAME (&divert_if)) !=DIVERT_NO_ERR ) { +printk (KERN_WARNING "dss1_divert: error %d releasing module\n" , i);spin_unlock_irqrestore (&divert_lock, flags);return ; } -if (divert_dev_deinit ()) - {printk (KERN_WARNING "dss1_divert: device busy, remove cancelled\n" ); +if (divert_dev_deinit ()) { +printk (KERN_WARNING "dss1_divert: device busy, remove cancelled\n" );spin_unlock_irqrestore (&divert_lock, flags);return ; }
drivers/isdn/divert/isdn_divert.c +206 -217
748 lines not on this page · raw message
drivers/isdn/divert/isdn_divert.h +14 -14
@@ -43,8 +43,8 @@#define DEFLECT_ALL_IDS 0xFFFFFFFF/* all drivers selected */ -typedef struct -{ ulong drvid; /* driver ids, bit mapped */ +typedef struct { + ulong drvid; /* driver ids, bit mapped */ char my_msn[35]; /* desired msn, subaddr allowed */ char caller[35]; /* caller id, partial string with * + subaddr allowed */ char to_nr[35]; /* deflected to number incl. subaddress */
@@ -65,18 +65,18 @@ typedef structu_char waittime;/* maximum wait time for proceeding */ } divert_rule; -typedef union -{ int drv_version; /* return of driver version */ - struct - { int drvid; /* id of driver */ +typedef union { + int drv_version; /* return of driver version */ + struct { + int drvid; /* id of driver */ char drvnam[30]; /* name of driver */ } getid; - struct - { int ruleidx; /* index of rule */ + struct { + int ruleidx; /* index of rule */ divert_rule rule; /* rule parms */ } getsetrule; - struct - { u_char subcmd; /* 0 = hangup/reject, + struct { + u_char subcmd; /* 0 = hangup/reject, 1 = alert, 2 = deflect */ ulong callid; /* id of call delivered by ascii output */
@@ -84,8 +84,8 @@ typedef unionelse uus1 string (maxlen 31), data from rule used if empty */ } fwd_ctrl; -struct - {int drvid;/* id of driver */ +struct { +int drvid;/* id of driver */ u_char cfproc;/* cfu = 0, cfb = 1, cfnr = 2 */ ulong procid;/* process id returned when no error */ u_char service;/* basically coded service, 0 = all */
@@ -104,8 +104,8 @@ typedef union/**************************************************/ /* structure keeping ascii info for device output */ /**************************************************/ -struct divert_info -{struct divert_info *next; +struct divert_info { +struct divert_info *next;ulong usage_cnt;/* number of files still to work */ char info_start[2 ];/* info string start */ };
Signature · 1 line
1.7.3.4
PATCH 2/6 isdn/gigaset: leave DLE mode before hanging up
In reply to Tilman SchmidtSome firmware releases of Gigaset M105 do not accept AT+VLS=0 command in DLE mode, so always leave DLE mode before sending the command.
--- drivers/isdn/gigaset/ev-layer.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)
drivers/isdn/gigaset/ev-layer.c +5 -0
@@ -1693,6 +1693,11 @@ static void process_command_flags(struct cardstate *cs)for (i =0 ; i < cs->channels; ++i) { bcs = cs->bcs + i;if (bcs->at_state.pending_commands &PC_HUP ) { +if (cs->dle) { + cs->curchannel = bcs->channel; +schedule_sequence (cs, &cs->at_state,SEQ_DLE0 ); +return ; + } bcs->at_state.pending_commands &= ~PC_HUP ;if (bcs->at_state.pending_commands &PC_CID ) {/* not yet dialing: PC_NOCID is sufficient */
Signature · 1 line
1.7.3.4
PATCH 3/6 isdn/gigaset: beautify interface.c
In reply to Tilman SchmidtAvoid forward declarations and remove a needless initialization.
--- drivers/isdn/gigaset/interface.c | 46 ++++++++++++------------------------- 1 files changed, 15 insertions(+), 31 deletions(-)
drivers/isdn/gigaset/interface.c +15 -31
@@ -112,36 +112,6 @@ static int if_config(struct cardstate *cs, int *arg) }/*** the terminal driver ***/ -/* stolen from usbserial and some other tty drivers */ - -static int if_open (struct tty_struct *tty,struct file *filp); -static void if_close (struct tty_struct *tty,struct file *filp); -static int if_ioctl (struct tty_struct *tty, -unsigned int cmd,unsigned long arg); -static int if_write_room (struct tty_struct *tty); -static int if_chars_in_buffer (struct tty_struct *tty); -static void if_throttle (struct tty_struct *tty); -static void if_unthrottle (struct tty_struct *tty); -static void if_set_termios (struct tty_struct *tty,struct ktermios *old); -static int if_tiocmget (struct tty_struct *tty); -static int if_tiocmset (struct tty_struct *tty, -unsigned int set,unsigned int clear); -static int if_write (struct tty_struct *tty, -const unsigned char *buf,int count); - -static const struct tty_operations if_ops = { - .open = if_open, - .close = if_close, - .ioctl = if_ioctl, - .write = if_write, - .write_room = if_write_room, - .chars_in_buffer = if_chars_in_buffer, - .set_termios = if_set_termios, - .throttle = if_throttle, - .unthrottle = if_unthrottle, - .tiocmget = if_tiocmget, - .tiocmset = if_tiocmset, -};static int if_open (struct tty_struct *tty,struct file *filp) {
@@ -355,7 +325,7 @@ done:static int if_write_room (struct tty_struct *tty) {struct cardstate *cs = tty->driver_data; -int retval = -ENODEV ; +int retval;gig_dbg (DEBUG_IF ,"%u: %s()" , cs->minor_index, __func__);
@@ -498,6 +468,20 @@ out:mutex_unlock (&cs->mutex); } +static const struct tty_operations if_ops = { + .open = if_open, + .close = if_close, + .ioctl = if_ioctl, + .write = if_write, + .write_room = if_write_room, + .chars_in_buffer = if_chars_in_buffer, + .set_termios = if_set_termios, + .throttle = if_throttle, + .unthrottle = if_unthrottle, + .tiocmget = if_tiocmget, + .tiocmset = if_tiocmset, +}; +/* wakeup tasklet for the write operation */ static void if_wake (unsigned long data)
Signature · 1 line
1.7.3.4
PATCH 4/6 isdn/gigaset: beautify common.c
In reply to Tilman SchmidtRearrange the gigaset_freecs() function to make it more readable, and adapt gigaset_initcs() accordingly.
--- drivers/isdn/gigaset/common.c | 31 +++++++++---------------------- 1 files changed, 9 insertions(+), 22 deletions(-)
drivers/isdn/gigaset/common.c +9 -22
@@ -467,11 +467,6 @@ void gigaset_freecs(struct cardstate *cs)mutex_lock (&cs->mutex); -if (!cs->bcs) - goto f_cs; -if (!cs->inbuf) - goto f_bcs; -spin_lock_irqsave (&cs->lock, flags); cs->running =0 ;spin_unlock_irqrestore (&cs->lock, flags);/* event handler and timer are
@@ -507,17 +502,16 @@ void gigaset_freecs(struct cardstate *cs)gig_dbg (DEBUG_INIT ,"clearing at_state" );clear_at_state (&cs->at_state);dealloc_temp_at_states (cs); +clear_events (cs);tty_port_destroy (&cs->port);/* fall through */ case 0 :/* error in basic setup */ -clear_events (cs);gig_dbg (DEBUG_INIT ,"freeing inbuf" );kfree (cs->inbuf); +kfree (cs->bcs); } -f_bcs:gig_dbg (DEBUG_INIT ,"freeing bcs[]" ); -kfree (cs->bcs); -f_cs:gig_dbg (DEBUG_INIT ,"freeing cs" ); +mutex_unlock (&cs->mutex);free_cs (cs); }
@@ -687,19 +681,6 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,return NULL ; } -gig_dbg (DEBUG_INIT ,"allocating bcs[0..%d]" , channels -1 ); - cs->bcs =kmalloc (channels *sizeof (struct bc_state ),GFP_KERNEL ); -if (!cs->bcs) { -pr_err ("out of memory\n" ); - goto error; - } -gig_dbg (DEBUG_INIT ,"allocating inbuf" ); - cs->inbuf =kmalloc (sizeof (struct inbuf_t ),GFP_KERNEL ); -if (!cs->inbuf) { -pr_err ("out of memory\n" ); - goto error; - } - cs->cs_init =0 ; cs->channels = channels; cs->onechannel = onechannel;
@@ -729,6 +710,12 @@ struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, cs->mode =M_UNKNOWN ; cs->mstate =MS_UNINITIALIZED ; + cs->bcs =kmalloc (channels *sizeof (struct bc_state ),GFP_KERNEL ); + cs->inbuf =kmalloc (sizeof (struct inbuf_t ),GFP_KERNEL ); +if (!cs->bcs || !cs->inbuf) { +pr_err ("out of memory\n" ); + goto error; + } ++cs->cs_init;gig_dbg (DEBUG_INIT ,"setting up at_state" );
Signature · 1 line
1.7.3.4
PATCH 5/6 isdn/gigaset: beautify ev-layer.c
In reply to Tilman SchmidtCosmetic changes to drivers/isdn/gigaset/ev-layer.c and drivers/isdn/gigaset/gigaset.h to improve readability.
--- drivers/isdn/gigaset/ev-layer.c | 119 +++++++++++++++++++-------------------- drivers/isdn/gigaset/gigaset.h | 9 ++- 2 files changed, 64 insertions(+), 64 deletions(-)
drivers/isdn/gigaset/ev-layer.c +58 -61
@@ -351,10 +351,11 @@ struct reply_t gigaset_tab_cid[] =static const struct resp_type_t { -unsigned char *response; -int resp_code; -int type; -} resp_type[] = +char *response; +int resp_code; +int type; +} +resp_type[] = { {"OK" ,RSP_OK ,RT_NOTHING }, {"ERROR" ,RSP_ERROR ,RT_NOTHING },
@@ -374,11 +375,12 @@ static const struct resp_type_t { };static const struct zsau_resp_t { -unsigned char *str; -int code; -} zsau_resp[] = +char *str; +int code; +} +zsau_resp[] = { - {"OUTGOING_CALL_PROCEEDING" ,ZSAU_OUTGOING_CALL_PROCEEDING }, + {"OUTGOING_CALL_PROCEEDING" ,ZSAU_PROCEEDING }, {"CALL_DELIVERED" ,ZSAU_CALL_DELIVERED }, {"ACTIVE" ,ZSAU_ACTIVE }, {"DISCONNECT_IND" ,ZSAU_DISCONNECT_IND },
@@ -434,7 +436,7 @@ void gigaset_handle_modem_response(struct cardstate *cs) len = cs->cbytes;if (!len) {/* ignore additional LFs/CRs (M10x config mode or cx100) */ -gig_dbg (DEBUG_MCMD ,"skipped EOL [%02X]" , cs->respdata[len]); +gig_dbg (DEBUG_MCMD ,"skipped EOL [%02X]" , cs->respdata[0 ]);return ; } cs->respdata[len] =0 ;
@@ -707,27 +709,29 @@ static void schedule_init(struct cardstate *cs, int state) cs->commands_pending =1 ; } -/* Add "AT" to a command, add the cid, dle encode it, send the result to the -hardware. */ -static void send_command (struct cardstate *cs,const char *cmd,int cid, -int dle,gfp_t kmallocflags) +/* send an AT command +* adding the "AT" prefix, cid and DLE encapsulation as appropriate +*/ +static void send_command (struct cardstate *cs,const char *cmd, +struct at_state_t *at_state) { +int cid = at_state->cid;struct cmdbuf_t *cb;size_t buflen; buflen =strlen (cmd) +12 ;/* DLE ( A T 1 2 3 4 5 <cmd> DLE ) \0 */ - cb =kmalloc (sizeof (struct cmdbuf_t ) + buflen, kmallocflags); + cb =kmalloc (sizeof (struct cmdbuf_t ) + buflen,GFP_ATOMIC );if (!cb) {dev_err (cs->dev,"%s: out of memory\n" , __func__);return ; }if (cid >0 && cid <=65535 ) cb->len =snprintf (cb->buf, buflen, - dle ?"\020(AT%d%s\020)" :"AT%d%s" , + cs->dle ?"\020(AT%d%s\020)" :"AT%d%s" , cid, cmd);else cb->len =snprintf (cb->buf, buflen, - dle ?"\020(AT%s\020)" :"AT%s" , + cs->dle ?"\020(AT%s\020)" :"AT%s" , cmd); cb->offset =0 ; cb->next =NULL ;
@@ -886,7 +890,7 @@ static void finish_shutdown(struct cardstate *cs)gigaset_isdn_stop (cs); } -/* The rest is done by cleanup_cs () in user mode. */ +/* The rest is done by cleanup_cs() in process context. */ cs->cmd_result = -ENODEV ; cs->waiting =0 ;
@@ -976,10 +980,9 @@ exit: }static void handle_icall (struct cardstate *cs,struct bc_state *bcs, -struct at_state_t **p_at_state) +struct at_state_t *at_state) {int retval; -struct at_state_t *at_state = *p_at_state; retval =gigaset_isdn_icall (at_state);switch (retval) {
@@ -1176,7 +1179,7 @@ static void do_action(int action, struct cardstate *cs,spin_unlock_irqrestore (&cs->lock, flags);break ;case ACT_ICALL : -handle_icall (cs, bcs, p_at_state); +handle_icall (cs, bcs, at_state);break ;case ACT_FAILSDOWN :dev_warn (cs->dev,"Could not shut down the device.\n" );
@@ -1264,7 +1267,7 @@ static void do_action(int action, struct cardstate *cs, cs->commands_pending =1 ;break ; } -/* fall through */ +/* bad cid: fall through */ case ACT_FAILCID : cs->cur_at_seq =SEQ_NONE ; channel = cs->curchannel;
@@ -1339,7 +1342,6 @@ static void do_action(int action, struct cardstate *cs, *p_resp_code =RSP_ERROR ;break ; } -/*at_state->getstring = 1;*/ cs->gotfwver =0 ;break ;case ACT_GOTVER :
@@ -1471,7 +1473,6 @@ static void process_event(struct cardstate *cs, struct event_t *ev)int rcode;int genresp =0 ;int resp_code =RSP_ERROR ; -int sendcid;struct at_state_t *at_state;int index;int curact;
@@ -1499,7 +1500,6 @@ static void process_event(struct cardstate *cs, struct event_t *ev) at_state->ConState, ev->type); bcs = at_state->bcs; - sendcid = at_state->cid;/* Setting the pointer to the dial array */ rep = at_state->replystruct;
@@ -1510,10 +1510,12 @@ static void process_event(struct cardstate *cs, struct event_t *ev) || !at_state->timer_active) { ev->type = RSP_NONE; /* old timeout */ gig_dbg(DEBUG_EVENT, "old timeout"); - } else if (!at_state->waiting) -gig_dbg (DEBUG_EVENT ,"timeout occurred" ); - else - gig_dbg(DEBUG_EVENT, "stopped waiting"); + } else { +if (at_state->waiting) +gig_dbg (DEBUG_EVENT ,"stopped waiting" ); +else +gig_dbg (DEBUG_EVENT ,"timeout occurred" ); + } }spin_unlock_irqrestore (&cs->lock, flags);
@@ -1561,45 +1563,40 @@ static void process_event(struct cardstate *cs, struct event_t *ev)do_action (rep->action[curact], cs, bcs, &at_state, &p_command, &genresp, &resp_code, ev);if (!at_state) -break ;/* may be freed after disconnect */ +/* at_state destroyed by disconnect */ +return ; } -if (at_state) { -/* Jump to the next con-state regarding the array */ -if (rep->new_ConState >=0 ) - at_state->ConState = rep->new_ConState; +/* Jump to the next con-state regarding the array */ +if (rep->new_ConState >=0 ) + at_state->ConState = rep->new_ConState; -if (genresp) { -spin_lock_irqsave (&cs->lock, flags); +if (genresp) { +spin_lock_irqsave (&cs->lock, flags); + at_state->timer_expires =0 ; + at_state->timer_active =0 ; +spin_unlock_irqrestore (&cs->lock, flags); +gigaset_add_event (cs, at_state, resp_code,NULL ,0 ,NULL ); + }else { +/* Send command to modem if not NULL... */ +if (p_command) { +if (cs->connected) +send_command (cs, p_command, at_state); +else +gigaset_add_event (cs, at_state,RSP_NODEV , +NULL ,0 ,NULL ); + } + +spin_lock_irqsave (&cs->lock, flags); +if (!rep->timeout) { at_state->timer_expires =0 ; at_state->timer_active =0 ; -spin_unlock_irqrestore (&cs->lock, flags); -gigaset_add_event (cs, at_state, resp_code, -NULL ,0 ,NULL ); - }else { -/* Send command to modem if not NULL... */ -if (p_command) { -if (cs->connected) -send_command (cs, p_command, - sendcid, cs->dle, -GFP_ATOMIC ); -else -gigaset_add_event (cs, at_state, -RSP_NODEV , -NULL ,0 ,NULL ); - } - -spin_lock_irqsave (&cs->lock, flags); -if (!rep->timeout) { - at_state->timer_expires =0 ; - at_state->timer_active =0 ; - }else if (rep->timeout >0 ) {/* new timeout */ - at_state->timer_expires = rep->timeout *10 ; - at_state->timer_active =1 ; - ++at_state->timer_index; - } -spin_unlock_irqrestore (&cs->lock, flags); + }else if (rep->timeout >0 ) {/* new timeout */ + at_state->timer_expires = rep->timeout *10 ; + at_state->timer_active =1 ; + ++at_state->timer_index; } +spin_unlock_irqrestore (&cs->lock, flags); } }
drivers/isdn/gigaset/gigaset.h +6 -3
@@ -111,11 +111,10 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,/* connection state */ #define ZSAU_NONE 0 -#define ZSAU_DISCONNECT_IND 4 -#define ZSAU_OUTGOING_CALL_PROCEEDING 1#define ZSAU_PROCEEDING 1#define ZSAU_CALL_DELIVERED 2#define ZSAU_ACTIVE 3 +#define ZSAU_DISCONNECT_IND 4#define ZSAU_NULL 5#define ZSAU_DISCONNECT_REQ 6#define ZSAU_UNKNOWN -1
@@ -183,18 +182,22 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,#define AT_NUM 7/* variables in struct at_state_t */ +/* - numeric */ #define VAR_ZSAU 0#define VAR_ZDLE 1#define VAR_ZCTP 2 +/* total number */ #define VAR_NUM 3 - +/* - string */ #define STR_NMBR 0#define STR_ZCPN 1#define STR_ZCON 2#define STR_ZBC 3#define STR_ZHLC 4 +/* total number */ #define STR_NUM 5 +/* event types */ #define EV_TIMEOUT -105#define EV_IF_VER -106#define EV_PROC_CIDMODE -107
Signature · 1 line
1.7.3.4
PATCH 6/6 isdn/gigaset: fix zero size border case in debug dump
In reply to Tilman SchmidtIf subtracting 12 from l leaves zero we'd do a zero size allocation, leading to an oops later when we try to set the NUL terminator.
--- drivers/isdn/gigaset/capi.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
drivers/isdn/gigaset/capi.c +2 -0
@@ -248,6 +248,8 @@ static inline void dump_rawmsg(enum debuglevel level, const char *tag,CAPIMSG_APPID (data),CAPIMSG_MSGID (data), l, CAPIMSG_CONTROL(data)); l -=12 ; +if (l <=0 ) +return ; dbgline =kmalloc (3 * l,GFP_ATOMIC );if (!dbgline)return ;
Signature · 1 line
1.7.3.4
David Miller
maintainerFrom: Tilman Schmidt <[email protected]>
Date: Mon, 21 Jan 2013 22:57:20 +0100 (CET)
Quoted 3 lines
here's a series of six patches to the ISDN subsystem. Please consider for application to net-next. The last one should also go into -stable and is tagged "CC: stable" accordingly.
Patches 1-5 applied to net-next, patch 6 applied to 'net' and queued up for -stable.
We don't have changes bypass 'net' and go into stable from net-next like you intended. We also don't use CC: stable for networking patches, you ask me to queue them up into my -stable patch queue for networking instead.
Thanks.
Am 21.01.2013 23:38, schrieb David Miller:
Quoted 2 lines
Patches 1-5 applied to net-next, patch 6 applied to 'net' and queued up for -stable.
Thanks.
Quoted 4 lines
We don't have changes bypass 'net' and go into stable from net-next like you intended. We also don't use CC: stable for networking patches, you ask me to queue them up into my -stable patch queue for networking instead.
I see. Is there somewhere I can read up on the workflow for networking patches and how it fits in with the general plan of things?
Thanks,
Tilman
Signature · 4 lines
Tilman Schmidt E-Mail: [email protected] Bonn, Germany Diese Nachricht besteht zu 100% aus wiederverwerteten Bits. Ungeöffnet mindestens haltbar bis: (siehe Rückseite)