board: sama5d3_xplained: Fix SPL DTB read from NAND
PATCH 1/2 board: sama5d3_xplained: Fix SPL DTB read from NAND
From: Fabien Lehoussel <[email protected]>
SPL boot cannot find dtb if CONFIG_SPL_SEPARATE_BSS is disabled :
CONFIG_SPL_SEPARATE_BSS=n
RomBOOT
<debug_uart> Missing DTB
### ERROR ### Please RESET the board ###
RomBOOT
CONFIG_SPL_SEPARATE_BSS=y
RomBOOT
<debug_uart>
U-Boot SPL 2019.04-linux4sam_6.2-icp-dirty (Feb 24 2020 - 15:34:35 +0100) Trying to boot from NAND
<debug_uart>
--- configs/sama5d3_xplained_nandflash_defconfig | 1 + 1 file changed, 1 insertion(+)
configs/sama5d3_xplained_nandflash_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256K(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=6 root=ubi0:rootfs" # CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
Signature · 1 line
2.20.1
PATCH 1/2 board: sama5d3_xplained: Fix SPL DTB read from NAND
Quoted 15 lines · Eugen Hristev
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
From: Fabien Lehoussel <[email protected]>
SPL boot cannot find dtb if
CONFIG_SPL_SEPARATE_BSSis disabled :
CONFIG_SPL_SEPARATE_BSS=nRomBOOT
<debug_uart> Missing DTB
### ERROR ### Please RESET the board ###
RomBOOT
CONFIG_SPL_SEPARATE_BSS=y
Quoted 8 lines
RomBOOT
<debug_uart>
U-Boot SPL 2019.04-linux4sam_6.2-icp-dirty (Feb 24 2020 - 15:34:35 +0100) Trying to boot from NAND
<debug_uart>Signed-off-by Fabien Lehoussel <[email protected]>---
Applied this and patch 2/2 to u-boot-atmel/master
Thanks !
PATCH 2/2 board: sama5d3_xplained: Fix uboot size when loaded from NAND by SPL
In reply to Eugen HristevFrom: Fabien Lehoussel <[email protected]>
Uboot size is incorrect.
Uboot SPL use CONFIG_SYS_MONITOR_LEN to read uboot from NAND : 0x80000 With sama5d3_xplained_nandflash_defconfig : u-boot.bin size is ~800Ko 0xC0000
So I increased size to 1MB : 0x100000
--- include/configs/sama5d3_xplained.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
include/configs/sama5d3_xplained.h +3 -1
@@ -9,6 +9,7 @@#ifndef __CONFIG_H#define __CONFIG_H +#include <linux/sizes.h> #include "at91-sama5_common.h" /*
@@ -64,7 +65,8 @@#define CONFIG_SYS_SPL_MALLOC_START 0x20080000#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SYS_MONITOR_LEN (512 << 10) +/* size of u-boot.bin to load */ +#define CONFIG_SYS_MONITOR_LEN (2 * SZ_512K)#ifdef CONFIG_SD_BOOT #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
Signature · 1 line
2.20.1