Docu: Add LIBFOO_EXTRACT_CMDS
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
--- docs/manual/adding-packages-generic.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
docs/manual/adding-packages-generic.txt +3 -0
@@ -288,6 +288,9 @@ LIBFOO_VERSION = 2.32 Now, the variables that define what should be performed at the different steps of the build process. +* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method applies + * +LIBFOO_CONFIGURE_CMDS+ lists the actions to be performed to configure the package before its compilation.
Signature · 1 line
1.7.0.4
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
Hi Stephan,
2013/1/29 Stephan Hoffmann <[email protected]>:
Quoted 10 lines
Signed-off-by Stephan Hoffmann <[email protected]>--- docs/manual/adding-packages-generic.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)docs/manual/adding-packages-generic.txt +0
-0
docs/manual/adding-packages-generic.txt LIBFOO_VERSION = 2.32 · line 292
Quoted 5 lines
docs/manual/adding-packages-generic.txt +2
-0@@ -288,6 +288,9 @@ LIBFOO_VERSION = 2.32 Now, the variables that define what should be performed at the different steps of the build process. +* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method applies
It could be nice to add what are the standard/supported methods
Quoted 11 lines
docs/manual/adding-packages-generic.txt +1
-1+ * +LIBFOO_CONFIGURE_CMDS+ lists the actions to be performed to configure the package before its compilation. --1.7.0.4
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Regards,
Signature · 1 line
Samuel
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
Am 29.01.2013 11:18, schrieb Samuel Martin:
Quoted 16 lines
Hi Stephan,
2013/1/29 Stephan Hoffmann <[email protected]>:
Quoted 13 lines
Signed-off-by Stephan Hoffmann <[email protected]>--- docs/manual/adding-packages-generic.txt | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)docs/manual/adding-packages-generic.txt +0
-0@@ -288,6 +288,9 @@ LIBFOO_VERSION = 2.32 Now, the variables that define what should be performed at the different steps of the build process.
Quoted 3 lines
docs/manual/adding-packages-generic.txt LIBFOO_VERSION = 2.32 · line 292
Quoted 2 lines
docs/manual/adding-packages-generic.txt +2
-0+* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method appliesIt could be nice to add what are the standard/supported methods
Sure. But I do not know them, I just decided to document this one because I had to search for the information recently.
Quoted 15 lines
Quoted 8 lines
docs/manual/adding-packages-generic.txt +1
-1+ * +LIBFOO_CONFIGURE_CMDS+ lists the actions to be performed to configure the package before its compilation. --1.7.0.4
Quoted 4 lines
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildrootRegards,
Signature · 4 lines
reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
Quoted 1 line · Stephan Hoffmann
Am 29.01.2013 11:18, schrieb Samuel Martin:
[snip]
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
docs/manual/adding-packages-generic.txt LIBFOO_VERSION = 2.32 · line 292
Quoted 2 lines
docs/manual/adding-packages-generic.txt +2
-0+* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method appliesIt could be nice to add what are the standard/supported methods
Sure. But I do not know them, I just decided to document this one because I had to search for the information recently.
There is currently only one: tar - and if you don't override the
commands, tar is used regardless of filetype or extension.
It supports three compression types: gzip (extension .gz or .tgz),
bzip2 (extension .bz2, .tbz or .tbz2), and xz (extension .xz).
Feel free to copy the above directly :-)
Regards,
Arnout
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
Am 29.01.2013 18:29, schrieb Arnout Vandecappelle:
Quoted 9 lines · Stephan Hoffmann
Quoted 1 line
Am 29.01.2013 11:18, schrieb Samuel Martin:
[snip]
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
docs/manual/adding-packages-generic.txt LIBFOO_VERSION = 2.32 · line 292
Quoted 2 lines
docs/manual/adding-packages-generic.txt +2
-0+* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method appliesIt could be nice to add what are the standard/supported methods
Sure. But I do not know them, I just decided to document this one because I had to search for the information recently.
Quoted 8 lines
There is currently only one: tar - and if you don't override the
commands, tar is used regardless of filetype or extension.It supports three compression types: gzip (extension .gz or .tgz),
bzip2 (extension .bz2, .tbz or .tbz2), and xz (extension .xz).Feel free to copy the above directly :-)
I do not think that the list of XXX_CMDS variables is the right place to document the default behavior without them.
Of course whe should have a documentation of the default behaior somewhere in the manual, but I am not enough familiar with this topic to write it.
So I suggest to commit my patch as it is, it still applies to HEAD.
Regards
Stephan
Quoted 4 lines
Regards,
Arnout
Signature · 4 lines
reLinux - Stephan Hoffmann Am Schmidtgrund 124 50765 K?ln Tel. +49.221.95595-19 Fax: -64 www.reLinux.de sho at reLinux.de
PATCH 1/1 Docu: Add LIBFOO_EXTRACT_CMDS
Quoted 18 lines · Stephan Hoffmann
Am 29.01.2013 18:29, schrieb Arnout Vandecappelle:
Quoted 9 lines · Stephan Hoffmann
Quoted 1 line
Am 29.01.2013 11:18, schrieb Samuel Martin:
[snip]
Quoted 5 lines
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
docs/manual/adding-packages-generic.txt LIBFOO_VERSION = 2.32 · line 292
Quoted 2 lines
docs/manual/adding-packages-generic.txt +2
-0+* +LIBFOO_EXTRACT_CMDS+ lists the actions to be performed to + extract the package in case no standard method appliesIt could be nice to add what are the standard/supported methods
Sure. But I do not know them, I just decided to document this one because I had to search for the information recently.
Quoted 8 lines
There is currently only one: tar - and if you don't override the
commands, tar is used regardless of filetype or extension.It supports three compression types: gzip (extension .gz or .tgz),
bzip2 (extension .bz2, .tbz or .tbz2), and xz (extension .xz).Feel free to copy the above directly :-)
Quoted 8 lines
I do not think that the list of
XXX_CMDSvariables is the right place to document the default behavior without them.Of course whe should have a documentation of the default behaior somewhere in the manual, but I am not enough familiar with this topic to write it.
So I suggest to commit my patch as it is, it still applies to HEAD.
Good point.
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F