Pandaboard ethernet
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.
What is the driver of ethernet pandaboard and how-to use it ?
Quoted 7 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate CONFIG_USB_NET_SMSC95XX and then post output of ifconfig:
ifconfig -a
Yegor
Quoted 10 lines · Yegor Yefremov
Quoted 7 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate
CONFIG_USB_NET_SMSC95XXand then post output of ifconfig:
Hmm BT 2011.1.1 using kernel 3.6.8 and in omap2plus_defconfig is in this veriosion:CONFIG_USB_NET_SMSC95XX=y so it should be enabled. Maybe HW problem?
Quoted 8 lines
ifconfig -a
Yegor
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Cheers,
mbe
Signature · 10 lines
as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com
In buildroot, where is the .config file for the kernel.
It's a pandaboard ES card...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
Quoted 32 lines
Quoted 5 lines · Yegor Yefremov
Quoted 3 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
Quoted 7 lines
Quoted 5 lines
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate
CONFIG_USB_NET_SMSC95XXand then post output of ifconfig:Hmm BT 2011.1.1 using kernel 3.6.8 and in
omap2plus_defconfigis in this veriosion:CONFIG_USB_NET_SMSC95XX=yso it should be enabled. Maybe HW problem?Quoted 8 lines
ifconfig -a
Yegor
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildrootCheers,
mbe
CONFIG_USB_NET_SMSC95XX=y in output/build/linux-3.6.8
and the network works if i use ubuntu distrib...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
Quoted 32 lines
Quoted 5 lines · Yegor Yefremov
Quoted 3 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
Quoted 7 lines
Quoted 5 lines
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate
CONFIG_USB_NET_SMSC95XXand then post output of ifconfig:Hmm BT 2011.1.1 using kernel 3.6.8 and in
omap2plus_defconfigis in this veriosion:CONFIG_USB_NET_SMSC95XX=yso it should be enabled. Maybe HW problem?Quoted 8 lines
ifconfig -a
Yegor
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildrootCheers,
mbe
Please provide complete dmesg and ifconfig -a outputs (for both Ubuntu and BR). Please use http://pastebin.com/ for logs.
Yegor
Quoted 54 lines · Gerald
CONFIG_USB_NET_SMSC95XX=yin output/build/linux-3.6.8and the network works if i use ubuntu distrib...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
Quoted 35 lines
On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
Quoted 7 lines · <[email protected]> wrote:
Quoted 4 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
Quoted 8 lines
Quoted 5 lines
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate
CONFIG_USB_NET_SMSC95XXand then post output of ifconfig:Hmm BT 2011.1.1 using kernel 3.6.8 and in
omap2plus_defconfigis in this veriosion:CONFIG_USB_NET_SMSC95XX=yso it should be enabled. Maybe HW problem?Quoted 9 lines
ifconfig -a
Yegor
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildrootQuoted 5 lines
Cheers,
mbe
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
you probably need to enable EHCI too which is not enabled by default
+CONFIG_USB_EHCI_HCD_OMAP=y
Quoted 64 lines · Yegor Yefremov
Please provide complete dmesg and ifconfig -a outputs (for both Ubuntu and BR). Please use http://pastebin.com/ for logs.
Yegor
Quoted 50 lines · Gerald
CONFIG_USB_NET_SMSC95XX=yin output/build/linux-3.6.8and the network works if i use ubuntu distrib...
Le 31/01/2013 09:52, Belisko Marek a ?crit :
Quoted 35 lines
On Thu, Jan 31, 2013 at 9:43 AM, Yegor Yefremov
Quoted 7 lines · <[email protected]> wrote:
Quoted 4 lines · Gerald
With Buildroot 2011.11.1, i use the setting of pandaboard config, but i have no ethernet :
Quoted 8 lines
Quoted 5 lines
ifconfig eth0 up :
SIOCGIFFLAGS: No such device.What is the driver of ethernet pandaboard and how-to use it ?
Just activate
CONFIG_USB_NET_SMSC95XXand then post output of ifconfig:Hmm BT 2011.1.1 using kernel 3.6.8 and in
omap2plus_defconfigis in this veriosion:CONFIG_USB_NET_SMSC95XX=yso it should be enabled. Maybe HW problem?Quoted 9 lines
ifconfig -a
Yegor
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildrootQuoted 5 lines
Cheers,
mbe
Quoted 4 lines
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot