bugreport upstream: 0bda:819a RTL8188CUS WLAN doesn't work out of the box

DISCUSSION Xose Vazquez Perez 3 participants 8 messages Jan 26, 2013 – Feb 7, 2013 7 messages not in the archive Networking drivers (wireless)

lore

Share & tools

lore

Xose Vazquez Perez

author

2013-01-26 22:12 UTC #0 lore raw

Quoted 3 lines · Thomas Rosenkranz

0bda:819a RTL8188CUS WLAN doesn't work out of the box in downstream and upstreamkernel
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1102179

This should go to <[email protected]>

Try:

# modprobe rtl8192cu
# echo "0bda 819a" > /sys/bus/usb/drivers/rtl8192cu/new_id
# dmesg (see output)

Larry Finger

2013-02-06 19:05 UTC #1 lore raw

Quoted 6 lines · Xose Vazquez Perez

Quoted 3 lines · Thomas Rosenkranz
0bda:819a RTL8188CUS WLAN doesn't work out of the box in downstream and upstreamkernel
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1102179

Quoted 6 lines

This should go to <[email protected]>

Try:

# modprobe rtl8192cu
# echo "0bda 819a" > /sys/bus/usb/drivers/rtl8192cu/new_id
# dmesg (see output)

Please install the attached patch, and retry the above method. I fixed the probe function to get rid of the oops. If the device is really foreign, the process that writes new_id will not finish until the device is unplugged; however, the rest of the system is chugging along.

If 0bda:819a works with rtl8192cu, let me know, and I'll update the USB device table.

Larry

Quoted 1 line

From 2bd60bf2a4b91c9ae4e552568c4b76e238fc01a9 Mon Sep 17 00:00:00 2001

From: Larry Finger <[email protected]>
Date: Wed, 6 Feb 2013 12:41:36 -0600
Subject: [PATCH V2] rtlwifi: rtl8192cu: Fix NULL dereference BUG when using
new_id
To: [email protected]
Cc: [email protected]

When the new_id entry in /sysfs is used for a foreign USB device, rtlwifi BUGS with a NULL pointer dereference because the per-driver configuration data is not available. The probe function has been restructured as suggested by Ben Hutchings <[email protected]>.

Signed-off-by Larry Finger <[email protected]>

Cc Stable <[email protected]>

---
 drivers/net/wireless/rtlwifi/rtl8192cu/sw.c | 8 +++++++-
 drivers/net/wireless/rtlwifi/usb.c          | 5 +++--
 drivers/net/wireless/rtlwifi/usb.h          | 3 ++-
 3 files changed, 12 insertions(+), 4 deletions(-)

drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +7 -1

index d9e659f..577c0dc 100644
@@ -363,9 +363,15 @@ static struct usb_device_id rtl8192c_usb_ids[] = {
 
 MODULE_DEVICE_TABLE(usb, rtl8192c_usb_ids);
 
+static int rtl8192cu_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	return rtl_usb_probe(intf, id, &rtl92cu_hal_cfg);
+}
+
 static struct usb_driver rtl8192cu_driver = {
 	.name = "rtl8192cu",
-	.probe = rtl_usb_probe,
+	.probe = rtl8192cu_probe,
 	.disconnect = rtl_usb_disconnect,
 	.id_table = rtl8192c_usb_ids,

drivers/net/wireless/rtlwifi/usb.c +3 -2

index d42bbe2..476eaef 100644
@@ -937,7 +937,8 @@ static struct rtl_intf_ops rtl_usb_ops = {
 };
 
 int rtl_usb_probe(struct usb_interface *intf,
-			const struct usb_device_id *id)
+		  const struct usb_device_id *id,
+		  struct rtl_hal_cfg *rtl_hal_cfg)
 {
 	int err;
 	struct ieee80211_hw *hw = NULL;

@@ -972,7 +973,7 @@ int rtl_usb_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, hw);
 	/* init cfg & intf_ops */
 	rtlpriv->rtlhal.interface = INTF_USB;
-	rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info);
+	rtlpriv->cfg = rtl_hal_cfg;
 	rtlpriv->intf_ops = &rtl_usb_ops;
 	rtl_dbgp_flag_init(hw);
 	/* Init IO handler */

drivers/net/wireless/rtlwifi/usb.h +2 -1

index 5235136..fb986f9 100644
@@ -157,7 +157,8 @@ struct rtl_usb_priv {
 
 
 int rtl_usb_probe(struct usb_interface *intf,
-			    const struct usb_device_id *id);
+		  const struct usb_device_id *id,
+		  struct rtl_hal_cfg *rtl92cu_hal_cfg);
 void rtl_usb_disconnect(struct usb_interface *intf);
 int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message);
 int rtl_usb_resume(struct usb_interface *pusb_intf);

Signature · 1 line

1.8.1

Thomas Rosenkranz

2013-02-06 20:03 UTC #2 lore raw

Sorry for aksing back.
1. You mean I should get the kernel clean of the realtek driver first to prevent a crash during patching? Cause unplugging is no option for a onboard device.
2. I have no idea what to do with the patching file and couldn't find any good instructions with google. "man patch" doesn't make me smarter at all

2013/2/6 Larry Finger <[email protected]>:

Quoted 27 lines · Xose Vazquez Perez

Quoted 8 lines
Quoted 3 lines · Thomas Rosenkranz
0bda:819a RTL8188CUS WLAN doesn't work out of the box in downstream and upstreamkernel
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1102179
Quoted 6 lines
This should go to <[email protected]>
Try:
# modprobe rtl8192cu
# echo "0bda 819a" > /sys/bus/usb/drivers/rtl8192cu/new_id
# dmesg (see output)
Please install the attached patch, and retry the above method. I fixed the probe function to get rid of the oops. If the device is really foreign, the process that writes new_id will not finish until the device is unplugged; however, the rest of the system is chugging along.
If 0bda:819a works with rtl8192cu, let me know, and I'll update the USB device table.
Larry

Larry Finger

2013-02-06 23:56 UTC #3 lore raw

Quoted 7 lines · Thomas Rosenkranz

Sorry for aksing back.
1. You mean I should get the kernel clean of the realtek driver first to prevent a crash during patching? Cause unplugging is no option for a onboard device.
2. I have no idea what to do with the patching file and couldn't find any good instructions with google. "man patch" doesn't make me smarter at all

Put the patch in the directory where the arch, block, crypto, drivers, and so forth directories are located. Then run the command

patch -p1 < 0001-......patch

After that, run "make" followed by "sudo make modules_install install". If your distro is reasonable, that will give you a new entry in your boot menu.

Larry

A message that is not in the archive (sent off-list or not yet received): CAOAX8-=_D9PncnaCGkfFKBkenxppQ-EksEQk5UwFKtBY+toRaQ@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): CAOAX8-nafHZiCYYP2-ApLMKJ-d3HKcbkENeztpPjLKv39EEzig@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): CAOAX8-nCRm2S0OX8TeNmZ9HGe0MB8UmA-huWE_QctgDhtFrZEA@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): CAOAX8-k28rV4mx3D9U_jLHbVPmphEd0ZsfwPp4TatVxkdts=_w@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): CAOAX8-m-nOLtSXAnWGHia8U2qsp_QPnJ-O0cqUy2FWwoLFh-_g@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

Thomas Rosenkranz

2013-02-07 17:01 UTC #11 lore raw

I know thats why i wanted to remove it before.
Sorry I didn't saw the last two commands they were shown as citation. Finally rtl8192cu works with the patch

2013/2/7 Xose Vazquez Perez <[email protected]>:

Quoted 10 lines · Thomas Rosenkranz

Quoted 4 lines
forget to say, I removed all entrys in /etc/modprobe.d/* relating to 8192cu to prevent problems with realtek driver and after the reboot I did sudo modprobe 8192cu. Was this wrong?
Do a rmmod 8192cu before loading rtl8192cu
8192cu is the realtek driver and
rtl8192cu is kernel driver

[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000de814000 (usable)
[    0.000000]  BIOS-e820: 00000000de814000 - 00000000dee13000 (reserved)
[    0.000000]  BIOS-e820: 00000000dee13000 - 00000000df093000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df093000 - 00000000df098000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000df098000 - 00000000df0db000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000df0db000 - 00000000df4ba000 (usable)
[    0.000000]  BIOS-e820: 00000000df4ba000 - 00000000df7f4000 (reserved)
[    0.000000]  BIOS-e820: 00000000df7f4000 - 00000000df800000 (usable)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021f000000 (usable)
[    0.000000] PAT support disabled.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.7 present.
[    0.000000] DMI: LENOVO Lenovo A720/ChiefRiver, BIOS E5KT20AUS 03/26/2012
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)                                                                                            
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)                                                                                                           
[    0.000000] No AGP bridge found                                                                                                                                                       
[    0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FF0000000 write-back
[    0.000000]   2 base 210000000 mask FF8000000 write-back
[    0.000000]   3 base 218000000 mask FFC000000 write-back
[    0.000000]   4 base 21C000000 mask FFE000000 write-back
[    0.000000]   5 base 21E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 256MB, type WB
[    0.000000] reg 2, base: 8448MB, range: 128MB, type WB
[    0.000000] reg 3, base: 8576MB, range: 64MB, type WB
[    0.000000] reg 4, base: 8640MB, range: 32MB, type WB
[    0.000000] reg 5, base: 8672MB, range: 16MB, type WB
[    0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[    0.000000] total RAM covered: 8176M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K  chunk_size: 32M         num_reg: 6      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 4GB, type WB
[    0.000000] reg 4, base: 8GB, range: 512MB, type WB
[    0.000000] reg 5, base: 8688MB, range: 16MB, type UC
[    0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcca0] fcca0
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000df800000
[    0.000000]  0000000000 - 00df800000 page 2M
[    0.000000] kernel direct mapping tables up to df800000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021f000000
[    0.000000]  0100000000 - 021f000000 page 2M
[    0.000000] kernel direct mapping tables up to 21f000000 @ df7fa000-df800000
[    0.000000] RAMDISK: 358aa000 - 36c4d000
[    0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 8688MB)
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000df047078 00074 (v01 LENOVO TC-03    00000120 AMI  00010013)
[    0.000000] ACPI: FACP 00000000df04ff10 000F4 (v04 LENOVO TC-03    00000120 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000df047188 08D85 (v02 LENOVO TC-03    00000120 INTL 20051117)
[    0.000000] ACPI: FACS 00000000df091f80 00040
[    0.000000] ACPI: APIC 00000000df050008 00092 (v03 LENOVO TC-03    00000120 AMI  00010013)
[    0.000000] ACPI: ASF! 00000000df0500a0 000A5 (v32 LENOVO TC-03    00000120 TFSM 000F4240)
[    0.000000] ACPI: MCFG 00000000df050148 0003C (v01 LENOVO TC-03    00000120 MSFT 00000097)
[    0.000000] ACPI: SLIC 00000000df050188 00176 (v01 LENOVO TC-03    00000120 AMI  00010013)
[    0.000000] ACPI: HPET 00000000df050300 00038 (v01 LENOVO TC-03    00000120 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000df050338 0036D (v01 LENOVO TC-03    00000120 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000df0506a8 008E4 (v01 LENOVO TC-03    00000120 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000df050f90 00A92 (v01 LENOVO TC-03    00000120 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000df051a28 01392 (v01 LENOVO TC-03    00000120 INTL 20091112)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021f000000
[    0.000000] Initmem setup node 0 0000000000000000-000000021f000000
[    0.000000]   NODE_DATA [000000021effb000 - 000000021effffff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021f000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000de814
[    0.000000]     0: 0x000df0db -> 0x000df4ba
[    0.000000]     0: 0x000df7f4 -> 0x000df800
[    0.000000]     0: 0x00100000 -> 0x0021f000
[    0.000000] On node 0 totalpages: 2087820
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 891967 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1157184 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000de814000 - 00000000dee13000
[    0.000000] PM: Registered nosave memory: 00000000dee13000 - 00000000df093000
[    0.000000] PM: Registered nosave memory: 00000000df093000 - 00000000df098000
[    0.000000] PM: Registered nosave memory: 00000000df098000 - 00000000df0db000
[    0.000000] PM: Registered nosave memory: 00000000df4ba000 - 00000000df7f4000
[    0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at df800000 (gap: df800000:18800000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83136 r8192 d23360 u262144
[    0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2053063
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-37-generic root=UUID=ea1671bb-6d90-4e88-8808-5a5fc1bff71c ro nopat crashkernel=384M-2G:64M,2G-:128M resume=UUID=e4918e2d-1704-43a6-93c0-93235d39768e
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7986224k/8896512k available (6569k kernel code, 545232k absent, 365056k reserved, 6634k data, 924k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2294.936 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.87 BogoMIPS (lpj=9179744)
[    0.000166] pid_max: default: 32768 minimum: 301
[    0.000272] Security Framework initialized
[    0.000362] AppArmor: AppArmor initialized
[    0.000439] Yama: becoming mindful.
[    0.001024] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003214] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004239] Mount-cache hash table entries: 256
[    0.004410] Initializing cgroup subsys cpuacct
[    0.004492] Initializing cgroup subsys memory
[    0.004575] Initializing cgroup subsys devices
[    0.004656] Initializing cgroup subsys freezer
[    0.004734] Initializing cgroup subsys blkio
[    0.004816] Initializing cgroup subsys perf_event
[    0.004920] CPU: Physical Processor ID: 0
[    0.004997] CPU: Processor Core ID: 0
[    0.005076] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.005077] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.005627] mce: CPU supports 9 MCE banks
[    0.005716] CPU0: Thermal monitoring enabled (TM1)
[    0.005804] using mwait in idle threads.
[    0.007919] ACPI: Core revision 20110623
[    0.013700] ftrace: allocating 27033 entries in 107 pages
[    0.022745] x2apic not enabled, IRQ remapping init failed
[    0.023229] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062976] CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz stepping 09
[    0.168126] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.168379] ... version:                3
[    0.168458] ... bit width:              48
[    0.168535] ... generic registers:      4
[    0.168611] ... value mask:             0000ffffffffffff
[    0.168693] ... max period:             000000007fffffff
[    0.168774] ... fixed-purpose events:   3
[    0.168850] ... event mask:             000000070000000f
[    0.169061] NMI watchdog enabled, takes one hw-pmu counter.
[    0.169209] Booting Node   0, Processors  #1
[    0.169313] smpboot cpu 1: start_ip = 98000
[    0.280592] NMI watchdog enabled, takes one hw-pmu counter.
[    0.280746]  #2
[    0.280796] smpboot cpu 2: start_ip = 98000
[    0.388492] NMI watchdog enabled, takes one hw-pmu counter.
[    0.388643]  #3
[    0.388694] smpboot cpu 3: start_ip = 98000
[    0.496490] NMI watchdog enabled, takes one hw-pmu counter.
[    0.496637]  #4
[    0.496688] smpboot cpu 4: start_ip = 98000
[    0.604390] NMI watchdog enabled, takes one hw-pmu counter.
[    0.604555]  #5
[    0.604608] smpboot cpu 5: start_ip = 98000
[    0.720315] NMI watchdog enabled, takes one hw-pmu counter.
[    0.720467]  #6
[    0.720520] smpboot cpu 6: start_ip = 98000
[    0.828317] NMI watchdog enabled, takes one hw-pmu counter.
[    0.828468]  #7 Ok.
[    0.828542] smpboot cpu 7: start_ip = 98000
[    0.936271] NMI watchdog enabled, takes one hw-pmu counter.
[    0.936380] Brought up 8 CPUs
[    0.936454] Total of 8 processors activated (36716.75 BogoMIPS).
[    0.944750] devtmpfs: initialized
[    0.945601] EVM: security.selinux
[    0.945677] EVM: security.SMACK64
[    0.945752] EVM: security.capability
[    0.945846] PM: Registering ACPI NVS region at dee13000 (2621440 bytes)
[    0.945963] PM: Registering ACPI NVS region at df098000 (274432 bytes)
[    0.946769] print_constraints: dummy: 
[    0.946875] RTC time: 17:53:12, date: 02/07/13
[    0.946980] NET: Registered protocol family 16
[    0.947143] Trying to unpack rootfs image as initramfs...
[    0.947146] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.947148] ACPI: bus type pci registered
[    0.947210] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.947212] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.953653] PCI: Using configuration type 1 for base access
[    0.954528] bio: create slab <bio-0> at 0
[    0.954668] ACPI: Added _OSI(Module Device)
[    0.954746] ACPI: Added _OSI(Processor Device)
[    0.954825] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.954906] ACPI: Added _OSI(Processor Aggregator Device)
[    0.956385] ACPI: EC: Look up EC in DSDT
[    0.957722] ACPI: Executed 1 blocks of module-level executable AML code
[    1.024623] ACPI: SSDT 00000000dedbf018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.025174] ACPI: Dynamic OEM Table Load:
[    1.025345] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    1.051866] ACPI: SSDT 00000000dedc0a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.052446] ACPI: Dynamic OEM Table Load:
[    1.052619] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    1.075735] ACPI: SSDT 00000000dedc2c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.076279] ACPI: Dynamic OEM Table Load:
[    1.076452] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    1.100678] ACPI: Interpreter enabled
[    1.100757] ACPI: (supports S0 S3 S4 S5)
[    1.101040] ACPI: Using IOAPIC for interrupt routing
[    1.106117] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    1.106369] ACPI: No dock devices found.
[    1.106448] HEST: Table not found.
[    1.106525] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.106898] \_SB_.PCI0:_OSC invalid UUID
[    1.106900] _OSC request data:1 8 1f 
[    1.106904] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.107427] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.107513] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.107598] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.107709] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    1.107815] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    1.107922] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    1.108028] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    1.108134] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    1.108240] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    1.108347] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[    1.108462] pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
[    1.108499] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
[    1.108530] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.108533] pci 0000:00:01.0: PME# disabled
[    1.108575] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[    1.108599] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    1.108672] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.108676] pci 0000:00:14.0: PME# disabled
[    1.108699] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[    1.108723] pci 0000:00:16.0: reg 10: [mem 0xf7d1a000-0xf7d1a00f 64bit]
[    1.108801] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.108805] pci 0000:00:16.0: PME# disabled
[    1.108838] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[    1.108859] pci 0000:00:1a.0: reg 10: [mem 0xf7d18000-0xf7d183ff]
[    1.108952] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.108956] pci 0000:00:1a.0: PME# disabled
[    1.108981] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[    1.108997] pci 0000:00:1b.0: reg 10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    1.109066] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.109070] pci 0000:00:1b.0: PME# disabled
[    1.109092] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[    1.109173] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.109177] pci 0000:00:1c.0: PME# disabled
[    1.109200] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[    1.109282] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.109286] pci 0000:00:1c.1: PME# disabled
[    1.109312] pci 0000:00:1c.2: [8086:1e14] type 1 class 0x000604
[    1.109393] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.109397] pci 0000:00:1c.2: PME# disabled
[    1.109430] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[    1.109452] pci 0000:00:1d.0: reg 10: [mem 0xf7d17000-0xf7d173ff]
[    1.109544] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.109549] pci 0000:00:1d.0: PME# disabled
[    1.109573] pci 0000:00:1f.0: [8086:1e59] type 0 class 0x000601
[    1.109699] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[    1.109718] pci 0000:00:1f.2: reg 10: [io  0xf070-0xf077]
[    1.109727] pci 0000:00:1f.2: reg 14: [io  0xf060-0xf063]
[    1.109735] pci 0000:00:1f.2: reg 18: [io  0xf050-0xf057]
[    1.109743] pci 0000:00:1f.2: reg 1c: [io  0xf040-0xf043]
[    1.109751] pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
[    1.109760] pci 0000:00:1f.2: reg 24: [mem 0xf7d16000-0xf7d167ff]
[    1.109807] pci 0000:00:1f.2: PME# supported from D3hot
[    1.109811] pci 0000:00:1f.2: PME# disabled
[    1.109830] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[    1.109846] pci 0000:00:1f.3: reg 10: [mem 0xf7d15000-0xf7d150ff 64bit]
[    1.109868] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
[    1.109928] pci 0000:01:00.0: [10de:0de9] type 0 class 0x000300
[    1.109938] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[    1.109949] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.109960] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.109967] pci 0000:01:00.0: reg 24: [io  0xe000-0xe07f]
[    1.109975] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[    1.110032] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[    1.110041] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[    1.115642] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.115725] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.115728] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    1.115731] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.115804] pci 0000:02:00.0: [1131:7231] type 0 class 0x000480
[    1.115843] pci 0000:02:00.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[    1.115873] pci 0000:02:00.0: reg 18: [mem 0xf7400000-0xf77fffff 64bit]
[    1.116039] pci 0000:02:00.0: supports D1 D2
[    1.116041] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    1.116047] pci 0000:02:00.0: PME# disabled
[    1.123642] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.123727] pci 0000:00:1c.0:   bridge window [mem 0xf7400000-0xf7bfffff]
[    1.123803] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[    1.123823] pci 0000:03:00.0: reg 10: [io  0xd000-0xd0ff]
[    1.123858] pci 0000:03:00.0: reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
[    1.123881] pci 0000:03:00.0: reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    1.123975] pci 0000:03:00.0: supports D1 D2
[    1.123977] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.123982] pci 0000:03:00.0: PME# disabled
[    1.131636] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.131721] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    1.131729] pci 0000:00:1c.1:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.131854] pci 0000:04:00.0: [10ec:5229] type 0 class 0x00ff00
[    1.131921] pci 0000:04:00.0: reg 10: [mem 0xf7c00000-0xf7c00fff]
[    1.132408] pci 0000:04:00.0: supports D1 D2
[    1.132410] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    1.132421] pci 0000:04:00.0: PME# disabled
[    1.139657] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.139742] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    1.139768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.139874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.139903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    1.139938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.139974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.140060] \_SB_.PCI0:_OSC invalid UUID
[    1.140061] _OSC request data:1 1f 1f 
[    1.140065]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.140185] \_SB_.PCI0:_OSC invalid UUID
[    1.140186] _OSC request data:1 0 1d 
[    1.140189]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.140297] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.143741] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.144385] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.145019] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.145654] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.146293] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147045] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.147802] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.148440] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.149126] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    1.149235] vgaarb: loaded
[    1.149309] vgaarb: bridge control possible 0000:01:00.0
[    1.149469] i2c-core: driver [aat2870] using legacy suspend method
[    1.149552] i2c-core: driver [aat2870] using legacy resume method
[    1.149685] SCSI subsystem initialized
[    1.149793] libata version 3.00 loaded.
[    1.149828] usbcore: registered new interface driver usbfs
[    1.149914] usbcore: registered new interface driver hub
[    1.150010] usbcore: registered new device driver usb
[    1.150151] PCI: Using ACPI for IRQ routing
[    1.151757] PCI: pci_cache_line_size set to 64 bytes
[    1.151848] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    1.151851] reserve RAM buffer: 00000000de814000 - 00000000dfffffff 
[    1.151853] reserve RAM buffer: 00000000df4ba000 - 00000000dfffffff 
[    1.151855] reserve RAM buffer: 00000000df800000 - 00000000dfffffff 
[    1.151857] reserve RAM buffer: 000000021f000000 - 000000021fffffff 
[    1.151935] NetLabel: Initializing
[    1.152011] NetLabel:  domain hash size = 128
[    1.152088] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.152178] NetLabel:  unlabeled traffic allowed by default
[    1.152297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.152801] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.154894] Switching to clocksource hpet
[    1.159864] AppArmor: AppArmor Filesystem Enabled
[    1.159960] pnp: PnP ACPI init
[    1.160044] ACPI: bus type pnp registered
[    1.160340] pnp 00:00: [bus 00-3e]
[    1.160342] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.160344] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.160346] pnp 00:00: [io  0x0d00-0xffff window]
[    1.160348] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.160350] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.160351] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.160353] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.160355] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.160356] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.160358] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.160360] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.160361] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.160363] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.160365] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.160366] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.160368] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.160370] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.160373] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[    1.160375] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[    1.160426] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.160445] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    1.160476] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.160563] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.160572] pnp 00:02: [io  0x0000-0x001f]
[    1.160573] pnp 00:02: [io  0x0081-0x0091]
[    1.160575] pnp 00:02: [io  0x0093-0x009f]
[    1.160576] pnp 00:02: [io  0x00c0-0x00df]
[    1.160578] pnp 00:02: [dma 4]
[    1.160596] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.160602] pnp 00:03: [mem 0xff000000-0xffffffff]
[    1.160619] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.160683] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    1.160700] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.160710] pnp 00:05: [io  0x002e-0x002f]
[    1.160711] pnp 00:05: [io  0x004e-0x004f]
[    1.160712] pnp 00:05: [io  0x0061]
[    1.160714] pnp 00:05: [io  0x0063]
[    1.160715] pnp 00:05: [io  0x0065]
[    1.160716] pnp 00:05: [io  0x0067]
[    1.160718] pnp 00:05: [io  0x0070]
[    1.160719] pnp 00:05: [io  0x0080]
[    1.160720] pnp 00:05: [io  0x0092]
[    1.160722] pnp 00:05: [io  0x00b2-0x00b3]
[    1.160723] pnp 00:05: [io  0x0680-0x069f]
[    1.160724] pnp 00:05: [io  0x0200-0x020f]
[    1.160726] pnp 00:05: [io  0xffff]
[    1.160727] pnp 00:05: [io  0xffff]
[    1.160729] pnp 00:05: [io  0x0400-0x0453]
[    1.160730] pnp 00:05: [io  0x0458-0x047f]
[    1.160731] pnp 00:05: [io  0x0500-0x057f]
[    1.160733] pnp 00:05: [io  0x164e-0x164f]
[    1.160766] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.160848] system 00:05: [io  0x0200-0x020f] has been reserved
[    1.160932] system 00:05: [io  0xffff] has been reserved
[    1.161013] system 00:05: [io  0xffff] has been reserved
[    1.161094] system 00:05: [io  0x0400-0x0453] has been reserved
[    1.161177] system 00:05: [io  0x0458-0x047f] has been reserved
[    1.161261] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.161344] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.161428] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.161435] pnp 00:06: [io  0x0070-0x0077]
[    1.161443] pnp 00:06: [irq 8]
[    1.161462] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.161483] pnp 00:07: [io  0x0454-0x0457]
[    1.161512] system 00:07: [io  0x0454-0x0457] has been reserved
[    1.161596] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.161614] pnp 00:08: [io  0x0010-0x001f]
[    1.161615] pnp 00:08: [io  0x0022-0x003f]
[    1.161617] pnp 00:08: [io  0x0044-0x005f]
[    1.161618] pnp 00:08: [io  0x0072-0x007f]
[    1.161620] pnp 00:08: [io  0x0080]
[    1.161621] pnp 00:08: [io  0x0084-0x0086]
[    1.161622] pnp 00:08: [io  0x0088]
[    1.161624] pnp 00:08: [io  0x008c-0x008e]
[    1.161625] pnp 00:08: [io  0x0090-0x009f]
[    1.161626] pnp 00:08: [io  0x00a2-0x00bf]
[    1.161628] pnp 00:08: [io  0x00e0-0x00ef]
[    1.161631] pnp 00:08: [io  0x04d0-0x04d1]
[    1.161660] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    1.161744] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.161751] pnp 00:09: [io  0x00f0-0x00ff]
[    1.161756] pnp 00:09: [irq 13]
[    1.161775] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.161964] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    1.161966] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[    1.161968] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[    1.161969] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[    1.161971] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[    1.161972] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    1.161974] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[    1.161975] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    1.161977] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    1.161978] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    1.161980] pnp 00:0a: [mem 0xf2200000-0xf2200fff]
[    1.162031] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.162116] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.162200] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.162285] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.162370] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.162454] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.162539] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.162625] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.162709] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    1.162794] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.162880] system 00:0a: [mem 0xf2200000-0xf2200fff] has been reserved
[    1.162973] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.163090] pnp: PnP ACPI: found 11 devices
[    1.163168] ACPI: ACPI bus type pnp unregistered
[    1.169484] PCI: max bus depth: 1 pci_try_num: 2
[    1.169515] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.169597] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.169682] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    1.169767] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.169876] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.169960] pci 0000:00:1c.0:   bridge window [mem 0xf7400000-0xf7bfffff]
[    1.170051] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.170134] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    1.170222] pci 0000:00:1c.1:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.170334] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    1.170419] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    1.170521] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.170608] pci 0000:00:01.0: setting latency timer to 64
[    1.170614] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.170702] pci 0000:00:1c.0: setting latency timer to 64
[    1.170712] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.170798] pci 0000:00:1c.1: setting latency timer to 64
[    1.170808] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.170895] pci 0000:00:1c.2: setting latency timer to 64
[    1.170899] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.170901] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.170903] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.170905] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.170907] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.170908] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.170910] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.170912] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.170914] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.170924] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[    1.170926] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.170927] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    1.170929] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.170931] pci_bus 0000:02: resource 1 [mem 0xf7400000-0xf7bfffff]
[    1.170933] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    1.170935] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.170937] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    1.170963] NET: Registered protocol family 2
[    1.171195] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.171942] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.173075] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.173272] TCP: Hash tables configured (established 524288 bind 65536)
[    1.173358] TCP reno registered
[    1.173444] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.173552] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.173710] NET: Registered protocol family 1
[    1.173807] pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.176187] pci 0000:00:14.0: PCI INT A disabled
[    1.176275] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.194925] pci 0000:00:1a.0: PCI INT A disabled
[    1.195027] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.214911] pci 0000:00:1d.0: PCI INT A disabled
[    1.215012] pci 0000:01:00.0: Boot video device
[    1.215037] PCI: CLS 64 bytes, default 64
[    1.215039] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.215123] Placing 64MB software IO TLB between ffff8800da814000 - ffff8800de814000
[    1.215231] software IO TLB at phys 0xda814000 - 0xde814000
[    1.215851] audit: initializing netlink socket (disabled)
[    1.215938] type=2000 audit(1360259591.988:1): initialized
[    1.238818] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.240619] VFS: Disk quotas dquot_6.5.2
[    1.240735] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.241187] fuse init (API version 7.17)
[    1.241330] msgmni has been set to 15598
[    1.246823] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.246960] io scheduler noop registered
[    1.247040] io scheduler deadline registered
[    1.247142] io scheduler cfq registered (default)
[    1.247289] pcieport 0000:00:01.0: setting latency timer to 64
[    1.247312] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.247487] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.247585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.247707] intel_idle: MWAIT substates: 0x21120
[    1.247708] intel_idle: v0.4 model 0x3A
[    1.247709] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.247801] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.247913] ACPI: Power Button [PWRB]
[    1.248021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.248128] ACPI: Power Button [PWRF]
[    1.250097] thermal LNXTHERM:00: registered as thermal_zone0
[    1.250180] ACPI: Thermal Zone [TZ00] (46 C)
[    1.251638] thermal LNXTHERM:01: registered as thermal_zone1
[    1.251721] ACPI: Thermal Zone [TZ01] (46 C)
[    1.251833] ERST: Table is not found!
[    1.251910] GHES: HEST is not enabled!
[    1.252042] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.288895] Freeing initrd memory: 20108k freed
[    1.471244] Linux agpgart interface v0.103
[    1.472444] brd: module loaded
[    1.473068] loop: module loaded
[    1.473234] ahci 0000:00:1f.2: version 3.0
[    1.473252] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.473383] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    1.486802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.486912] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.487021] ahci 0000:00:1f.2: setting latency timer to 64
[    1.503144] scsi0 : ahci
[    1.503287] scsi1 : ahci
[    1.503415] scsi2 : ahci
[    1.503543] scsi3 : ahci
[    1.503672] scsi4 : ahci
[    1.503799] scsi5 : ahci
[    1.504125] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 41
[    1.504231] ata2: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16180 irq 41
[    1.504339] ata3: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16200 irq 41
[    1.504445] ata4: DUMMY
[    1.504519] ata5: DUMMY
[    1.504591] ata6: DUMMY
[    1.504920] Fixed MDIO Bus: probed
[    1.505009] tun: Universal TUN/TAP device driver, 1.6
[    1.505090] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.505208] PPP generic driver version 2.4.2
[    1.505358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.505454] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.505553] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.505557] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.505670] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.505799] ehci_hcd 0000:00:1a.0: debug port 2
[    1.509759] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.509773] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    1.522757] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.522946] hub 1-0:1.0: USB hub found
[    1.523027] hub 1-0:1.0: 2 ports detected
[    1.523152] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.523249] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.523252] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.523365] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.523489] ehci_hcd 0000:00:1d.0: debug port 2
[    1.527451] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.527463] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    1.542745] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.542925] hub 2-0:1.0: USB hub found
[    1.543004] hub 2-0:1.0: 2 ports detected
[    1.543126] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.543217] uhci_hcd: USB Universal Host Controller Interface driver
[    1.543321] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.543425] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.543428] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.543544] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.543733] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.543737] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
[    1.543859] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[    1.543951] xHCI xhci_add_endpoint called for root hub
[    1.543952] xHCI xhci_check_bandwidth called for root hub
[    1.543971] hub 3-0:1.0: USB hub found
[    1.544054] hub 3-0:1.0: 4 ports detected
[    1.544173] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.544285] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.544454] xHCI xhci_add_endpoint called for root hub
[    1.544456] xHCI xhci_check_bandwidth called for root hub
[    1.544474] hub 4-0:1.0: USB hub found
[    1.544557] hub 4-0:1.0: 4 ports detected
[    1.606754] usbcore: registered new interface driver libusual
[    1.606864] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.610790] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.610876] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.611054] mousedev: PS/2 mouse device common for all mice
[    1.611247] rtc_cmos 00:06: RTC can wake from S4
[    1.611422] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.611533] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.611676] device-mapper: uevent: version 1.0.3
[    1.611809] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    1.612101] cpuidle: using governor ladder
[    1.612466] cpuidle: using governor menu
[    1.612544] EFI Variables Facility v0.08 2004-May-17
[    1.612782] TCP cubic registered
[    1.612929] NET: Registered protocol family 10
[    1.613322] NET: Registered protocol family 17
[    1.613403] Registering the dns_resolver key type
[    1.613587] PM: Checking hibernation image partition UUID=e4918e2d-1704-43a6-93c0-93235d39768e
[    1.617727] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.822639] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.822743] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.826725] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.826729] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.826840] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.830626] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.831017] ata1.00: ATA-8: WDC WD7500BPVT-24HXZT3, 03.01A03, max UDMA/133
[    1.831108] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.831461] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.831465] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.831575] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.832135] ata2.00: ATA-9: M4-CT128M4SSD3, 04MH, max UDMA/100
[    1.832221] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.832965] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.832969] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.833079] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.833625] ata2.00: configured for UDMA/100
[    1.834623] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.834845] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.834849] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.834958] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.835617] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.835620] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.835725] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.837771] ata3.00: ATAPI: HL-DT-ST BDDVDRW CA30N, QD01, max UDMA/133
[    1.840849] ata1.00: configured for UDMA/133
[    1.841078] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 03.0 PQ: 0 ANSI: 5
[    1.841330] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.841452] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    1.841571] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.841694] scsi 1:0:0:0: Direct-Access     ATA      M4-CT128M4SSD3   04MH PQ: 0 ANSI: 5
[    1.841893] sd 0:0:0:0: [sda] Write Protect is off
[    1.841958] sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.841986] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.842010] sd 1:0:0:0: [sdb] Write Protect is off
[    1.842013] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.842027] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.842362] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.842452] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.842611]  sdb: sdb1 sdb2 sdb3
[    1.842800] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.842806] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.842922] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.843173] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.845771] ata3.00: configured for UDMA/133
[    1.849181] scsi 2:0:0:0: CD-ROM            HL-DT-ST BDDVDRW CA30N    QD01 PQ: 0 ANSI: 5
[    1.852802] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.852920] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.853147] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.853246] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.868828]  sda: sda1 sda2 sda3
[    1.869696] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.869808] PM: Hibernation image not present or could not be loaded.
[    1.869827] registered taskstats version 1
[    1.877432]   Magic number: 1:642:895
[    1.877611] rtc_cmos 00:06: setting system clock to 2013-02-07 17:53:13 UTC (1360259593)
[    1.878826] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.878908] EDD information not available.
[    1.880057] Freeing unused kernel memory: 924k freed
[    1.880212] Write protecting the kernel read-only data: 12288k
[    1.883394] Freeing unused kernel memory: 1604k freed
[    1.885813] Freeing unused kernel memory: 1196k freed
[    1.897495] udevd[126]: starting version 175
[    1.914394] acpi device:1a: registered as cooling_device8
[    1.914563] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/LNXVIDEO:00/input/input3
[    1.921605] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.921709] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.921829] r8169 0000:03:00.0: setting latency timer to 64
[    1.921915] Initializing Realtek PCIE storage driver...
[    1.921929] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[    1.922070] --- Feb  5 2013, 19:18:00 ---
[    1.922172] rts5229 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.922203] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
[    1.922251] r8169 0000:03:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7e000, 04:7d:7b:b5:bd:c0, XID 0c900800 IRQ 43
[    1.922253] r8169 0000:03:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.922851] Resource length: 0x1000
[    1.922971] Original address: 0xf7c00000, remapped address: 0xffffc90005784000
[    1.923100] pci->irq = 18
[    1.923180] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
[    1.923309] rts5229 0000:04:00.0: setting latency timer to 64
[    1.927201] scsi6 : SCSI emulation for RTS5229
[    1.927409] rts5229: waiting for device to settle before scanning
[    1.967314] hub 1-1:1.0: USB hub found
[    1.967527] hub 1-1:1.0: 6 ports detected
[    2.078485] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    2.211082] hub 2-1:1.0: USB hub found
[    2.211277] hub 2-1:1.0: 6 ports detected
[    2.214408] Refined TSC clocksource calibration: 2294.785 MHz.
[    2.214505] Switching to clocksource tsc
[    2.378337] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[    2.401267] usbcore: registered new interface driver usbhid
[    2.401345] usbhid: USB HID core driver
[    2.406830] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[    2.410604] input: Logitech Unifying Device. Wireless PID:4017 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/input/input4
[    2.410917] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4017] on usb-0000:00:14.0-3:1
[    2.470429] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[    2.564501] hub 1-1.1:1.0: USB hub found
[    2.564725] hub 1-1.1:1.0: 3 ports detected
[    2.634342] usb 1-1.2: new full-speed USB device number 4 using ehci_hcd
[    2.733111] generic-usb 0003:2619:5610.0006: hiddev0,hidraw2: USB HID v1.10 Device [Advanced Silicon S.A.                  CoolTouch(TM) System                  ] on usb-0000:00:1a.0-1.2/input1
[    2.802253] usb 1-1.4: new high-speed USB device number 5 using ehci_hcd
[    2.926192] rts5229: device scan complete
[    2.926366] scsi 6:0:0:0: Direct-Access     Generic- SD/M.S.          1.00 PQ: 0 ANSI: 0 CCS
[    2.926533] Bad LUN (0:1)
[    2.926715] Bad target number (1:0)
[    2.926897] Bad target number (2:0)
[    2.927057] Bad target number (3:0)
[    2.927229] Bad target number (4:0)
[    2.927437] Bad target number (5:0)
[    2.927602] Bad target number (6:0)
[    2.927740] Bad target number (7:0)
[    2.927967] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    2.928160] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    2.966172] usb 1-1.5: new high-speed USB device number 6 using ehci_hcd
[    3.130090] usb 2-1.5: new full-speed USB device number 3 using ehci_hcd
[    3.229835] input: Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5
[    3.230192] generic-usb 0003:17EF:6032.0007: input,hidraw3: USB HID v1.11 Keyboard [Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit] on usb-0000:00:1d.0-1.5/input0
[    3.235249] input: Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6
[    3.235707] generic-usb 0003:17EF:6032.0008: input,hiddev0,hidraw4: USB HID v1.11 Device [Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit] on usb-0000:00:1d.0-1.5/input1
[    3.237514] input: Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input7
[    3.237748] generic-usb 0003:17EF:6032.0009: input,hidraw5: USB HID v1.11 Mouse [Lite-On Technology Corp. Lenovo silver silk (wireless) 2.4G K&M kit] on usb-0000:00:1d.0-1.5/input2
[    3.309988] usb 1-1.1.1: new full-speed USB device number 7 using ehci_hcd
[    3.406859] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input8
[    3.407195] generic-usb 0003:0A5C:4502.000A: input,hidraw6: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1a.0-1.1.1/input0
[    3.477926] usb 1-1.1.2: new full-speed USB device number 8 using ehci_hcd
[    3.576025] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input9
[    3.576394] generic-usb 0003:0A5C:4503.000B: input,hidraw7: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1a.0-1.1.2/input0
[    3.645798] usb 1-1.1.3: new full-speed USB device number 9 using ehci_hcd
[    3.739961] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    6.238351] Adding 8396796k swap on /dev/sdb2.  Priority:-1 extents:1 across:8396796k SS
[    6.245924] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.248108] udevd[428]: starting version 175
[    6.257653] lp: driver loaded but no devices found
[    6.260753] rtw driver version=v3.4.4_4749.20121105 
[    6.260756] Build at: Feb  5 2013 19:22:17
[    6.260799] usbcore: registered new interface driver rtl8192cu
[    6.269990] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[    6.270004] wmi: Mapper loaded
[    6.277190] nvidia: module license 'NVIDIA' taints kernel.
[    6.277193] Disabling lock debugging due to kernel taint
[    6.300071] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    6.300336] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.300342] mei 0000:00:16.0: setting latency timer to 64
[    6.300399] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[    6.304789] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    6.304841] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    6.304866] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    6.309066] nvidia 0000:01:00.0: power state changed by ACPI to D0
[    6.309069] nvidia 0000:01:00.0: power state changed by ACPI to D0
[    6.309075] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.309081] nvidia 0000:01:00.0: setting latency timer to 64
[    6.309084] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    6.309147] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  310.14  Tue Oct  9 11:52:41 PDT 2012
[    6.311873] input: Advanced Silicon S.A.                  CoolTouch(TM) System                   as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10
[    6.312041] hid-multitouch 0003:2619:5610.0005: input,hidraw8: USB HID v1.10 Device [Advanced Silicon S.A.                  CoolTouch(TM) System                  ] on usb-0000:00:1a.0-1.2/input0
[    6.314411] Bluetooth: Core ver 2.16
[    6.314427] NET: Registered protocol family 31
[    6.314429] Bluetooth: HCI device and connection manager initialized
[    6.314431] Bluetooth: HCI socket layer initialized
[    6.314432] Bluetooth: L2CAP socket layer initialized
[    6.314437] Bluetooth: SCO socket layer initialized
[    6.315172] Linux video capture interface: v2.00
[    6.315624] uvcvideo: Found UVC 1.00 device Lenovo H264 720P Camera (17ef:4820)
[    6.316575] uvcvideo: No streaming interface found for terminal 9.
[    6.316638] input: Lenovo H264 720P Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11
[    6.316711] usbcore: registered new interface driver uvcvideo
[    6.316713] USB Video Class driver (1.1.1)
[    6.317161] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    6.318414] usbcore: registered new interface driver btusb
[    6.352173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.352262] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.352528] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    6.352532] hda_intel: Disabling MSI
[    6.352578] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    7.167883] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[    7.191871] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[    7.215851] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[    7.239840] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    7.239941] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[    7.240097] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[    7.240258] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[    7.240389] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[    7.652233] init: udev-fallback-graphics main process (997) terminated with status 1
[    8.595751] init: failsafe main process (1017) killed by TERM signal
[    8.613372] ppdev: user-space parallel port driver
[    8.614553] Bluetooth: RFCOMM TTY layer initialized
[    8.614557] Bluetooth: RFCOMM socket layer initialized
[    8.614558] Bluetooth: RFCOMM ver 1.11
[    8.623062] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.623066] Bluetooth: BNEP filters: protocol multicast
[    8.651510] init: gdm main process (1147) killed by TERM signal
[    8.653949] init: kdm main process (1129) killed by TERM signal
[    8.755975] r8169 0000:03:00.0: eth0: link down
[    8.756396] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.756603] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.198313] NVRM: GPU at 0000:01:00: GPU-01a21cf4-41d4-a898-dee1-10943c5d4112
[   13.215212] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[  224.244233] register rtw_netdev_ops to netdev_ops
[  224.244239] CHIP TYPE: RTL8188C_8192C
[  224.244244] 
[  224.244245] usb_endpoint_descriptor(0):
[  224.244248] bLength=7
[  224.244249] bDescriptorType=5
[  224.244251] bEndpointAddress=81
[  224.244253] wMaxPacketSize=200
[  224.244255] bInterval=0
[  224.244257] RT_usb_endpoint_is_bulk_in = 1
[  224.244259] 
[  224.244260] usb_endpoint_descriptor(1):
[  224.244262] bLength=7
[  224.244264] bDescriptorType=5
[  224.244265] bEndpointAddress=2
[  224.244267] wMaxPacketSize=200
[  224.244269] bInterval=0
[  224.244270] RT_usb_endpoint_is_bulk_out = 2
[  224.244273] 
[  224.244273] usb_endpoint_descriptor(2):
[  224.244275] bLength=7
[  224.244277] bDescriptorType=5
[  224.244279] bEndpointAddress=3
[  224.244280] wMaxPacketSize=200
[  224.244282] bInterval=0
[  224.244284] RT_usb_endpoint_is_bulk_out = 3
[  224.244304] 
[  224.244305] usb_endpoint_descriptor(3):
[  224.244308] bLength=7
[  224.244311] bDescriptorType=5
[  224.244315] bEndpointAddress=84
[  224.244319] wMaxPacketSize=40
[  224.244324] bInterval=1
[  224.244329] RT_usb_endpoint_is_int_in = 4, Interval = 1
[  224.244336] nr_endpoint=4, in_num=2, out_num=2
[  224.244338] 
[  224.244342] USB_SPEED_HIGH
[  224.244540] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
[  224.244548] RF_Type is 3!!
[  224.245012] EEPROM type is E-FUSE
[  224.245018] ====> ReadAdapterInfo8192C
[  224.245136] Boot from EFUSE, Autoload OK !
[  224.434521] EEPROMVID = 0x0bda
[  224.434525] EEPROMPID = 0x819a
[  224.434527] EEPROMCustomerID : 0x00
[  224.434530] EEPROMSubCustomerID: 0x00
[  224.434532] RT_CustomerID: 0x00
[  224.434535] _ReadMACAddress MAC Address from EFUSE = 00:1c:7b:a8:a8:f3
[  224.434539] EEPROMRegulatory = 0x1
[  224.434541] _ReadBoardType(3)
[  224.434543] BT Coexistance = disable
[  224.434546] RT_ChannelPlan: 0x0a
[  224.434548] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(10) ,bSupportRemoteWakeup(0)
[  224.434552] ### PS params=>  power_mgnt(1),usbss_enable(0) ###
[  224.434554] ### AntDivCfg(0)
[  224.434556] readAdapterInfo_8192CU(): REPLACEMENT = 1
[  224.434560] <==== ReadAdapterInfo8192C in 188 ms
[  224.434810] rtw_macaddr_cfg MAC Address  = 00:1c:7b:a8:a8:f3
[  224.434813] MAC Address from pnetdev->dev_addr= 00:1c:7b:a8:a8:f3
[  224.435407] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[  224.446018] bDriverStopped=1
[  224.446760] +871x_drv - drv_open, bup=0
[  224.451015]  ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
[  224.451021] FirmwareDownload92C accquire FW from embedded image
[  224.451025] fw_ver=v80, fw_subver=0, sig=0x88c0
[  224.480086] fw download ok!
[  224.480091] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[  224.856055] IQK:Start!!!
[  224.867168] Path A IQK Success!!
[  224.875040] Path A IQK Success!!
[  224.879789] IQK: final_candidate is 0
[  224.879793] IQK: RegE94=ff RegE9C=e RegEA4=fd RegEAC=3fd RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
[  224.879795]  Path A IQ Calibration Success !
[  224.993132] pdmpriv->TxPowerTrackControl = 1
[  224.998101] MAC Address from REG_MACID = 00:1c:7b:a8:a8:f3
[  224.998105] rtl8192cu_hal_init in 552ms
[  224.998109] MAC Address = 00:1c:7b:a8:a8:f3
[  225.003166] -871x_drv - drv_open, bup=1
[  225.004517] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  225.005068] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  225.005099] set_mode = IW_MODE_INFRA
[  225.016246] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[  225.016257] set_mode = IW_MODE_INFRA
[  225.056067] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[  226.410383] survey done event(21)
[  226.441582] IW_SCAN_THIS_ESSID, ssid=nicht dein WLAN, len=15
[  227.797021] survey done event(26)
[  227.799065] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[  227.799073] set_mode = IW_MODE_INFRA
[  227.799089] 
[  227.799090]  wpa_ie(length:22):
[  227.799094] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02 
[  227.799098] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00 
[  227.799101] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00 
[  227.799115] =>rtw_wx_set_essid
[  227.799118] ssid=nicht dein WLAN, len=15
[  227.799122] Set SSID under fw_state=0x00000008
[  227.799129] [by_bssid:0][assoc_ssid:nicht dein WLAN][to_roaming:0] new candidate: nicht dein WLAN(00:15:0c:f1:0d:d0) rssi:-38
[  227.799135] rtw_select_and_join_from_scanned_queue: candidate: nicht dein WLAN(00:15:0c:f1:0d:d0)
[  227.799142] link to new AP
[  227.799146] <=rtw_wx_set_essid, ret 0
[  227.799153] Set BSSID under fw_state=0x00000088
[  227.931502] link to new AP
[  227.931509] issue_deauth to 00:15:0c:f1:0d:d0
[  227.935996] OnAuthClient
[  227.936010] network.SupportedRates[0]=82
[  227.936015] network.SupportedRates[1]=84
[  227.936018] network.SupportedRates[2]=8B
[  227.936022] network.SupportedRates[3]=96
[  227.936025] network.SupportedRates[4]=2C
[  227.936029] network.SupportedRates[5]=0C
[  227.936033] network.SupportedRates[6]=12
[  227.936036] network.SupportedRates[7]=18
[  227.936040] network.SupportedRates[8]=24
[  227.936043] network.SupportedRates[9]=30
[  227.936047] network.SupportedRates[10]=48
[  227.936051] network.SupportedRates[11]=60
[  227.936054] network.SupportedRates[12]=6C
[  227.936059] issue_assocreq(): the rate[4]=2C is not supported by STA!
[  227.936063] bssrate_len = 12
[  227.942603] OnAssocRsp
[  227.942612] report_join_res(1)
[  227.942617] rtw_joinbss_update_network
[  227.942627] rtw_joinbss_update_stainfo
[  227.942695] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
[  227.943828] HTOnAssocRsp
[  227.944031] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  227.948860] update raid entry, mask=0x40000fff, arg=0x80
[  227.950436] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
[  227.951343] SetFwRsvdPagePkt
[  227.951361] Set RSVD page location to Fw.
[  227.952695] =>mlmeext_joinbss_event_callback
[  227.954276] 
[  227.954279]  ~~~~stastakey:unicastkey
[  227.954367] 
[  227.954369]  ~~~~stastakey:groupkey
[  227.954373] ==> rtw_set_key algorithm(2),keyid(2),key_mask(4)
[  229.012889] rtl8192c_dm_RF_Saving(): RF_Save

Larry Finger

2013-02-07 17:38 UTC #12 lore raw

Quoted 3 lines · Thomas Rosenkranz

I know thats why i wanted to remove it before.
Sorry I didn't saw the last two commands they were shown as citation. Finally rtl8192cu works with the patch

Good. I'll submit a patch adding this USB ID to the standard kernels. I'll also send it to you so that you can patch your kernel and do away with the writing of new_id.

Larry

Xose Vazquez Perez

author Tested-by

2013-02-06 23:03 UTC #13 lore raw

In reply to Larry Finger

Quoted 2 lines · Larry Finger

Please install the attached patch, and retry the above method. I fixed the probe function to get rid of the oops. If the device is really foreign, the process that writes new_id will not finish until the device is unplugged; however, the rest of the system is chugging along.

I tried the patch. And now, rtl8192cu doesn't break the kernel.

But it should go out when an unknown chip/rf is detected, instead of trying to configure the unknown_device.

rtlwifi: reg 0xf0, usbctrl_vendorreq TimeOut! status:0xffffffe0 value=0x0
rtl8192cu: Chip version 0x10 <<<<<------WTF???
rtlwifi: reg 0xa, usbctrl_vendorreq TimeOut! status:0xffffffe0 value=0x0
rtlwifi: reg 0xfe66, usbctrl_vendorreq TimeOut! status:0xffffffe0 value=0x0
rtlwifi: reg 0xfe67, usbctrl_vendorreq TimeOut! status:0xffffffe0 value=0x0
rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1

Tested-by Xose Vazquez Perez <[email protected]>

Larry Finger

2013-02-06 23:50 UTC #14 lore raw

Quoted 9 lines · Xose Vazquez Perez

Quoted 2 lines · Larry Finger
Please install the attached patch, and retry the above method. I fixed the probe function to get rid of the oops. If the device is really foreign, the process that writes new_id will not finish until the device is unplugged; however, the rest of the system is chugging along.
I tried the patch. And now, rtl8192cu doesn't break the kernel.
But it should go out when an unknown chip/rf is detected, instead of trying to configure the unknown_device.

No fooling; however, the only way it can tell if the device is known is by seeing those USB timeouts. It took a very long time before the probe routine gets control again. I don't know any way to fix that.

Larry