rework pxa gpio driver for pinctrl
Subsystems (7)
v2 cover rework pxa gpio driver for pinctrl
Changelog:
v2:
* Fix the build issue without CONFIG_OF
* Append to check PINCTRL_SINGLE because of arch pxa not moved to DT
* Use bool for inverted, ed_mask, gafr variable
PATCH v2 1/10 gpio: pxa: identify ed mask reg with platform data
Avoid to judge whether edge mask register exists by CPU. Use platform data to identify it instead. The gpio edge mask register exists in MMP series SoC.
--- arch/arm/mach-mmp/aspenite.c | 7 +++++++ arch/arm/mach-mmp/avengers_lite.c | 7 +++++++ arch/arm/mach-mmp/brownstone.c | 7 +++++++ arch/arm/mach-mmp/flint.c | 7 +++++++ arch/arm/mach-mmp/gplugd.c | 7 +++++++ arch/arm/mach-mmp/tavorevb.c | 7 +++++++ arch/arm/mach-mmp/teton_bga.c | 7 +++++++ arch/arm/mach-mmp/ttc_dkb.c | 7 +++++++ drivers/gpio/gpio-pxa.c | 10 +++++++++- include/linux/gpio-pxa.h | 1 + 10 files changed, 66 insertions(+), 1 deletion(-)
arch/arm/mach-mmp/aspenite.c +7 -0
@@ -9,6 +9,7 @@* publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h>
@@ -110,6 +111,10 @@ static unsigned long common_pin_config[] __initdata = { GPIO121_KP_MKIN4, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .ed_mask = true, +}; +static struct smc91x_platdata smc91x_info = { .flags =SMC91X_USE_16BIT |SMC91X_NOWAIT , };
@@ -248,6 +253,8 @@ static void __init common_init(void)pxa168_add_nand (&aspenite_nand_info);pxa168_add_fb (&aspenite_lcd_info);pxa168_add_keypad (&aspenite_keypad_info); +platform_device_add_data (&pxa168_device_gpio, &pxa168_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&pxa168_device_gpio);/* off-chip devices */
arch/arm/mach-mmp/avengers_lite.c +7 -0
@@ -12,6 +12,7 @@#include <linux/init.h> #include <linux/kernel.h> +#include <linux/gpio-pxa.h> #include <linux/platform_device.h> #include <asm/mach-types.h>
@@ -32,12 +33,18 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { GPIO89_UART2_RXD, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .ed_mask = true, +}; +static void __init avengers_lite_init (void ) {mfp_config (ARRAY_AND_SIZE (avengers_lite_pin_config_V16F));/* on-chip devices */ pxa168_add_uart (2 ); +platform_device_add_data (&pxa168_device_gpio, &pxa168_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&pxa168_device_gpio); }
arch/arm/mach-mmp/brownstone.c +7 -0
@@ -14,6 +14,7 @@#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio-pxa.h> #include <linux/regulator/machine.h> #include <linux/regulator/max8649.h> #include <linux/regulator/fixed.h>
@@ -104,6 +105,10 @@ static unsigned long brownstone_pin_config[] __initdata = { GPIO89_GPIO, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .ed_mask = true, +}; +static struct regulator_consumer_supply max8649_supply[] = {REGULATOR_SUPPLY ("vcc_core" ,NULL ), };
@@ -202,6 +207,8 @@ static void __init brownstone_init(void)/* on-chip devices */ mmp2_add_uart (1 );mmp2_add_uart (3 ); +platform_device_add_data (&mmp2_device_gpio, &mmp2_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&mmp2_device_gpio);mmp2_add_twsi (1 ,NULL ,ARRAY_AND_SIZE (brownstone_twsi1_info));mmp2_add_sdhost (0 , &mmp2_sdh_platdata_mmc0);/* SD/MMC */
arch/arm/mach-mmp/flint.c +7 -0
@@ -16,6 +16,7 @@#include <linux/smc91x.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/interrupt.h> #include <asm/mach-types.h>
@@ -77,6 +78,10 @@ static unsigned long flint_pin_config[] __initdata = { GPIO160_ND_RDY1, }; +static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .ed_mask = true, +}; +static struct smc91x_platdata flint_smc91x_info = { .flags =SMC91X_USE_16BIT |SMC91X_NOWAIT , };
@@ -111,6 +116,8 @@ static void __init flint_init(void)/* on-chip devices */ mmp2_add_uart (1 );mmp2_add_uart (2 ); +platform_device_add_data (&mmp2_device_gpio, &mmp2_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&mmp2_device_gpio);/* off-chip devices */
arch/arm/mach-mmp/gplugd.c +7 -0
@@ -10,6 +10,7 @@#include <linux/init.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <asm/mach/arch.h> #include <asm/mach-types.h>
@@ -127,6 +128,10 @@ static unsigned long gplugd_pin_config[] __initdata = {GPIO116_I2S_TXD }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .ed_mask = true, +}; +static struct i2c_board_info gplugd_i2c_board_info[] = { { .type ="isl1208" ,
@@ -185,6 +190,8 @@ static void __init gplugd_init(void)pxa168_add_uart (3 );pxa168_add_ssp (1 );pxa168_add_twsi (0 ,NULL ,ARRAY_AND_SIZE (gplugd_i2c_board_info)); +platform_device_add_data (&pxa168_device_gpio, &pxa168_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&pxa168_device_gpio);pxa168_add_eth (&gplugd_eth_platform_data);
arch/arm/mach-mmp/tavorevb.c +7 -0
@@ -8,6 +8,7 @@* publishhed by the Free Software Foundation. */ #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/platform_device.h>
@@ -60,6 +61,10 @@ static unsigned long tavorevb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .ed_mask = true, +}; +static struct smc91x_platdata tavorevb_smc91x_info = { .flags =SMC91X_USE_16BIT |SMC91X_NOWAIT , };
@@ -93,6 +98,8 @@ static void __init tavorevb_init(void)/* on-chip devices */ pxa910_add_uart (1 ); +platform_device_add_data (&pxa910_device_gpio, &ttc_dkb_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&pxa910_device_gpio);/* off-chip devices */
arch/arm/mach-mmp/teton_bga.c +7 -0
@@ -16,6 +16,7 @@#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/input.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/i2c.h>
@@ -49,6 +50,10 @@ static unsigned long teton_bga_pin_config[] __initdata = { GPIO78_GPIO, }; +static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .ed_mask = true, +}; +static unsigned int teton_bga_matrix_key_map[] = {KEY (0 ,6 ,KEY_ESC ),KEY (0 ,7 ,KEY_ENTER ),
@@ -79,6 +84,8 @@ static void __init teton_bga_init(void)pxa168_add_uart (1 );pxa168_add_keypad (&teton_bga_keypad_info);pxa168_add_twsi (0 ,NULL ,ARRAY_AND_SIZE (teton_bga_i2c_info)); +platform_device_add_data (&pxa168_device_gpio, &pxa168_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_device_register (&pxa168_device_gpio); }
arch/arm/mach-mmp/ttc_dkb.c +7 -0
@@ -17,6 +17,7 @@#include <linux/interrupt.h> #include <linux/i2c/pca953x.h> #include <linux/gpio.h> +#include <linux/gpio-pxa.h> #include <linux/mfd/88pm860x.h> #include <linux/platform_data/mv_usb.h>
@@ -73,6 +74,10 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { DF_RDY0_DF_RDY0, }; +static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .ed_mask = true, +}; +static struct mtd_partition ttc_dkb_onenand_partitions[] = { { .name ="bootloader" ,
@@ -196,6 +201,8 @@ static void __init ttc_dkb_init(void)/* off-chip devices */ pxa910_add_twsi (0 ,NULL ,ARRAY_AND_SIZE (ttc_dkb_i2c_info)); +platform_device_add_data (&pxa910_device_gpio, &ttc_dkb_gpio_pdata, +sizeof (struct pxa_gpio_platform_data ));platform_add_devices (ARRAY_AND_SIZE (ttc_dkb_devices));#ifdef CONFIG_USB_MV_UDC
drivers/gpio/gpio-pxa.c +9 -1
@@ -493,6 +493,7 @@ const struct irq_domain_ops pxa_irq_domain_ops = {static int pxa_gpio_probe_dt (struct platform_device *pdev) {int ret, nr_banks, nr_gpios; +struct pxa_gpio_platform_data *pdata;struct device_node *prev, *next, *np = pdev->dev.of_node;const struct of_device_id *of_id =of_match_device (pxa_gpio_dt_ids, &pdev->dev);
@@ -501,6 +502,13 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)dev_err (&pdev->dev,"Failed to find gpio controller\n" );return -EFAULT ; } + pdata =devm_kzalloc (&pdev->dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return -ENOMEM ; +if (of_find_property (np,"marvell,gpio-ed-mask" ,NULL )) + pdata->ed_mask = true; +/* set the platform data */ + pdev->dev.platform_data = pdata; gpio_type = (int )of_id->data; next =of_get_next_child (np,NULL );
@@ -604,7 +612,7 @@ static int pxa_gpio_probe(struct platform_device *pdev)writel_relaxed (0 , c->regbase +GRER_OFFSET );writel_relaxed (~0 ,c->regbase +GEDR_OFFSET );/* unmask GPIO edge detect for AP side */ -if (gpio_is_mmp_type (gpio_type)) +if (info->ed_mask)writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); }
include/linux/gpio-pxa.h +1 -0
@@ -14,6 +14,7 @@ extern int pxa_last_gpio;extern int pxa_irq_to_gpio (int irq);struct pxa_gpio_platform_data { +bool ed_mask;/* true means that ed_mask reg is available */ int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 1 line
1.7.10.4
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
In reply to Haojian ZhuangAvoid to use global irq_base in gpio-pxa driver. Define irq_base in each pxa_gpio_chip instead. Then we can avoid to use macro PXA_GPIO_TO_IRQ() & MMP_GPIO_TO_IRQ().
--- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-pxa.c | 156 ++++++++++++++++++++++---------------------- include/linux/gpio-pxa.h | 4 +- 5 files changed, 85 insertions(+), 80 deletions(-)
arch/arm/mach-pxa/pxa25x.c +1 -1
@@ -289,7 +289,7 @@ static inline void pxa25x_init_pm(void) {}static int pxa25x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask =0 ;if (gpio >=0 && gpio <85 )
arch/arm/mach-pxa/pxa27x.c +1 -1
@@ -364,7 +364,7 @@ static inline void pxa27x_init_pm(void) {}*/ static int pxa27x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask;if (gpio >=0 && gpio <128 )
drivers/gpio/Kconfig +1 -0
@@ -201,6 +201,7 @@ config GPIO_PL061 config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP + select IRQ_DOMAIN help Say yes here to support the PXA GPIO device
drivers/gpio/gpio-pxa.c +79 -77
262 lines not on this page · raw message
include/linux/gpio-pxa.h +3 -1
@@ -1,6 +1,8 @@#ifndef __GPIO_PXA_H#define __GPIO_PXA_H +#include <linux/irq.h> +#define GPIO_bit (x) (1 << ((x) & 0x1f))#define gpio_to_bank (gpio) ((gpio) >> 5)
@@ -11,7 +13,7 @@*/ extern int pxa_last_gpio; -extern int pxa_irq_to_gpio (int irq); +extern int pxa_irq_to_gpio (struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */
Signature · 1 line
1.7.10.4
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 5 lines · Haojian Zhuang
Avoid to use global
irq_basein gpio-pxa driver. Defineirq_basein eachpxa_gpio_chipinstead. Then we can avoid to use macroPXA_GPIO_TO_IRQ()&MMP_GPIO_TO_IRQ().Signed-off-by Haojian Zhuang <[email protected]>
Quoted 350 lines
--- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-pxa.c | 156 ++++++++++++++++++++++---------------------- include/linux/gpio-pxa.h | 4 +- 5 files changed, 85 insertions(+), 80 deletions(-)arch/arm/mach-pxa/pxa25x.c +1
-1@@ -289,7 +289,7 @@ static inline void pxa25x_init_pm(void) {}static int pxa25x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask =0 ;if (gpio >=0 && gpio <85 )arch/arm/mach-pxa/pxa27x.c +1
-1@@ -364,7 +364,7 @@ static inline void pxa27x_init_pm(void) {}*/ static int pxa27x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask;if (gpio >=0 && gpio <128 )drivers/gpio/Kconfig +1
-0@@ -201,6 +201,7 @@ config GPIO_PL061 config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP + select IRQ_DOMAIN help Say yes here to support the PXA GPIO devicedrivers/gpio/gpio-pxa.c +79
-77@@ -13,6 +13,7 @@*/ #include <linux/module.h> #include <linux/clk.h> +#include <linux/device.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/gpio-pxa.h> @@ -61,16 +62,15 @@#define BANK_OFF (n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))int pxa_last_gpio; -static int irq_base;#ifdef CONFIG_OF -static struct irq_domain *domain;static struct device_node *pxa_gpio_of_node;#endif struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase; +unsigned int irq_base;char label[10 ];unsigned long irq_mask;@@ -170,14 +170,22 @@ static inline int __gpio_is_occupied(unsigned gpio)return ret; } -static int pxa_gpio_to_irq (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_to_irq (struct gpio_chip *gc,unsigned offset) { -return chip->base + offset + irq_base; +struct pxa_gpio_chip *chip =NULL ; + + chip = container_of(gc, struct pxa_gpio_chip, chip); +return chip->irq_base + offset; } -int pxa_irq_to_gpio (int irq) +int pxa_irq_to_gpio (struct irq_data *d) { -return irq - irq_base; +struct pxa_gpio_chip *chip; +int gpio; + + chip = (struct pxa_gpio_chip *)d->domain->host_data; + gpio = d->irq - chip->irq_base + chip->chip.base; +return gpio; }static int pxa_gpio_direction_input (struct gpio_chip *chip,unsigned offset)@@ -250,47 +258,6 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc, }#endif -static int pxa_init_gpio_chip (int gpio_end, -int (*set_wake)(unsigned int ,unsigned int )) -{ -int i, gpio, nbanks =gpio_to_bank (gpio_end) +1 ; -struct pxa_gpio_chip *chips; - - chips =kzalloc (nbanks *sizeof (struct pxa_gpio_chip ),GFP_KERNEL ); -if (chips ==NULL ) { -pr_err ("%s: failed to allocate GPIO chips\n" , __func__); -return -ENOMEM ; - } - -for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { -struct gpio_chip *c = &chips[i].chip; - -sprintf (chips[i].label,"gpio-%d" , i); - chips[i].regbase = gpio_reg_base +BANK_OFF (i); - chips[i].set_wake = set_wake; - - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - c->to_irq = pxa_gpio_to_irq; -#ifdef CONFIG_OF_GPIO - c->of_node = pxa_gpio_of_node; - c->of_xlate = pxa_gpio_of_xlate; - c->of_gpio_n_cells =2 ; -#endif - -/* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; -gpiochip_add (c); - } - pxa_gpio_chips = chips; -return 0 ; -} -/* Update only those GRERx and GFERx edge detection register bits if those * bits are set in c->irq_mask */ @@ -309,7 +276,7 @@ static inline void update_edge_detect(struct pxa_gpio_chip *c)static int pxa_gpio_irq_type (struct irq_data *d,unsigned int type) {struct pxa_gpio_chip *c; -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);unsigned long gpdr, mask =GPIO_bit (gpio); c =gpio_to_pxachip (gpio);@@ -383,7 +350,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)static void pxa_ack_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);writel_relaxed (GPIO_bit (gpio), c->regbase +GEDR_OFFSET );@@ -391,7 +358,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)static void pxa_mask_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);uint32_t grer, gfer;@@ -405,7 +372,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)static int pxa_gpio_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);if (c->set_wake)@@ -416,7 +383,7 @@ static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on)static void pxa_unmask_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); c->irq_mask |=GPIO_bit (gpio);@@ -469,13 +436,6 @@ static int pxa_gpio_nums(void)return count; } -#ifdef CONFIG_OF -static struct of_device_id pxa_gpio_dt_ids[] = { - { .compatible ="mrvl,pxa-gpio" }, - { .compatible ="mrvl,mmp-gpio" , .data = (void *)MMP_GPIO }, - {} -}; -static int pxa_irq_domain_map (struct irq_domain *d,unsigned int irq,irq_hw_number_t hw) {@@ -485,11 +445,18 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,return 0 ; } -const struct irq_domain_ops pxa_irq_domain_ops = { +static const struct irq_domain_ops pxa_irq_domain_ops = { .map = pxa_irq_domain_map, .xlate = irq_domain_xlate_twocell, }; +#ifdef CONFIG_OF +static struct of_device_id pxa_gpio_dt_ids[] = { + { .compatible ="mrvl,pxa-gpio" }, + { .compatible ="mrvl,mmp-gpio" , .data = (void *)MMP_GPIO }, + {} +}; +static int pxa_gpio_probe_dt (struct platform_device *pdev) {int ret, nr_banks, nr_gpios;@@ -528,14 +495,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) nr_gpios = nr_banks <<5 ; pxa_last_gpio = nr_gpios -1 ; - irq_base =irq_alloc_descs (-1 ,0 , nr_gpios,0 ); -if (irq_base <0 ) { -dev_err (&pdev->dev,"Failed to allocate IRQ numbers\n" ); - goto err; - } - domain =irq_domain_add_legacy (np, nr_gpios, irq_base,0 , - &pxa_irq_domain_ops,NULL ); - pxa_gpio_of_node = np;return 0 ; err:iounmap (gpio_reg_base);@@ -545,6 +504,56 @@ err:#define pxa_gpio_probe_dt (pdev) (-1)#endif +static int pxa_init_gpio_chip (struct platform_device *pdev,int gpio_end, +int (*set_wake)(unsigned int ,unsigned int )) +{ +int i, gpio, nbanks =gpio_to_bank (gpio_end) +1 ; +struct pxa_gpio_chip *chips; + + chips =devm_kzalloc (&pdev->dev, nbanks *sizeof (*chips),GFP_KERNEL ); +if (chips ==NULL ) { +pr_err ("%s: failed to allocate GPIO chips\n" , __func__); +return -ENOMEM ; + } + +for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { +struct gpio_chip *c = &chips[i].chip; + +sprintf (chips[i].label,"gpio-%d" , i); + chips[i].regbase = gpio_reg_base +BANK_OFF (i); + chips[i].set_wake = set_wake; + + c->base = gpio; + c->label = chips[i].label; + + c->direction_input = pxa_gpio_direction_input; + c->direction_output = pxa_gpio_direction_output; + c->get = pxa_gpio_get; + c->set = pxa_gpio_set; + c->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + c->of_node = pxa_gpio_of_node; + c->of_xlate = pxa_gpio_of_xlate; + c->of_gpio_n_cells =2 ; +#endif + +/* number of GPIOs on last bank may be less than 32 */ + c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; + + chips[i].irq_base =irq_alloc_descs (-1 ,0 , c->ngpio,0 ); +if (chips[i].irq_base <0 ) +return -EINVAL ; +if (!irq_domain_add_legacy (pdev->dev.of_node, c->ngpio, + chips[i].irq_base,0 , + &pxa_irq_domain_ops, &chips[i])) +return -ENODEV ; + +gpiochip_add (c); + } + pxa_gpio_chips = chips; +return 0 ; +} +static int pxa_gpio_probe (struct platform_device *pdev) {struct pxa_gpio_chip *c;@@ -557,14 +566,6 @@ static int pxa_gpio_probe(struct platform_device *pdev) ret =pxa_gpio_probe_dt (pdev);if (ret <0 ) { pxa_last_gpio =pxa_gpio_nums (); -#ifdef CONFIG_ARCH_PXA -if (gpio_is_pxa_type (gpio_type)) - irq_base =PXA_GPIO_TO_IRQ (0 ); -#endif -#ifdef CONFIG_ARCH_MMP -if (gpio_is_mmp_type (gpio_type)) - irq_base =MMP_GPIO_TO_IRQ (0 ); -#endif }else { use_of =1 ; }@@ -604,7 +605,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* Initialize GPIO chips */ info =dev_get_platdata (&pdev->dev); -pxa_init_gpio_chip (pxa_last_gpio, info ? info->gpio_set_wake :NULL ); +pxa_init_gpio_chip (pdev, pxa_last_gpio, + info ? info->gpio_set_wake :NULL );/* clear all GPIO edge detects */ for_each_gpio_chip (gpio, c) {include/linux/gpio-pxa.h +3
-1@@ -1,6 +1,8 @@#ifndef __GPIO_PXA_H#define __GPIO_PXA_H +#include <linux/irq.h> +#define GPIO_bit (x) (1 << ((x) & 0x1f))#define gpio_to_bank (gpio) ((gpio) >> 5)@@ -11,7 +13,7 @@*/ extern int pxa_last_gpio; -extern int pxa_irq_to_gpio (int irq); +extern int pxa_irq_to_gpio (struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */
Signature · 2 lines
Regards, Igor.
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
In reply to Haojian ZhuangQuoted 5 lines · Haojian Zhuang
Avoid to use global
irq_basein gpio-pxa driver. Defineirq_basein eachpxa_gpio_chipinstead. Then we can avoid to use macroPXA_GPIO_TO_IRQ()&MMP_GPIO_TO_IRQ().Signed-off-by Haojian Zhuang <[email protected]>
Ok. This patch breaks the NFS root on my PXA based systems. I still haven't found the cause of the breakage.
Quoted 350 lines
--- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-pxa.c | 156 ++++++++++++++++++++++---------------------- include/linux/gpio-pxa.h | 4 +- 5 files changed, 85 insertions(+), 80 deletions(-)arch/arm/mach-pxa/pxa25x.c +1
-1@@ -289,7 +289,7 @@ static inline void pxa25x_init_pm(void) {}static int pxa25x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask =0 ;if (gpio >=0 && gpio <85 )arch/arm/mach-pxa/pxa27x.c +1
-1@@ -364,7 +364,7 @@ static inline void pxa27x_init_pm(void) {}*/ static int pxa27x_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);uint32_t mask;if (gpio >=0 && gpio <128 )drivers/gpio/Kconfig +1
-0@@ -201,6 +201,7 @@ config GPIO_PL061 config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP + select IRQ_DOMAIN help Say yes here to support the PXA GPIO devicedrivers/gpio/gpio-pxa.c +79
-77@@ -13,6 +13,7 @@*/ #include <linux/module.h> #include <linux/clk.h> +#include <linux/device.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/gpio-pxa.h> @@ -61,16 +62,15 @@#define BANK_OFF (n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))int pxa_last_gpio; -static int irq_base;#ifdef CONFIG_OF -static struct irq_domain *domain;static struct device_node *pxa_gpio_of_node;#endif struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase; +unsigned int irq_base;char label[10 ];unsigned long irq_mask;@@ -170,14 +170,22 @@ static inline int __gpio_is_occupied(unsigned gpio)return ret; } -static int pxa_gpio_to_irq (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_to_irq (struct gpio_chip *gc,unsigned offset) { -return chip->base + offset + irq_base; +struct pxa_gpio_chip *chip =NULL ; + + chip = container_of(gc, struct pxa_gpio_chip, chip); +return chip->irq_base + offset; } -int pxa_irq_to_gpio (int irq) +int pxa_irq_to_gpio (struct irq_data *d) { -return irq - irq_base; +struct pxa_gpio_chip *chip; +int gpio; + + chip = (struct pxa_gpio_chip *)d->domain->host_data; + gpio = d->irq - chip->irq_base + chip->chip.base; +return gpio; }static int pxa_gpio_direction_input (struct gpio_chip *chip,unsigned offset)@@ -250,47 +258,6 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc, }#endif -static int pxa_init_gpio_chip (int gpio_end, -int (*set_wake)(unsigned int ,unsigned int )) -{ -int i, gpio, nbanks =gpio_to_bank (gpio_end) +1 ; -struct pxa_gpio_chip *chips; - - chips =kzalloc (nbanks *sizeof (struct pxa_gpio_chip ),GFP_KERNEL ); -if (chips ==NULL ) { -pr_err ("%s: failed to allocate GPIO chips\n" , __func__); -return -ENOMEM ; - } - -for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { -struct gpio_chip *c = &chips[i].chip; - -sprintf (chips[i].label,"gpio-%d" , i); - chips[i].regbase = gpio_reg_base +BANK_OFF (i); - chips[i].set_wake = set_wake; - - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - c->to_irq = pxa_gpio_to_irq; -#ifdef CONFIG_OF_GPIO - c->of_node = pxa_gpio_of_node; - c->of_xlate = pxa_gpio_of_xlate; - c->of_gpio_n_cells =2 ; -#endif - -/* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; -gpiochip_add (c); - } - pxa_gpio_chips = chips; -return 0 ; -} -/* Update only those GRERx and GFERx edge detection register bits if those * bits are set in c->irq_mask */ @@ -309,7 +276,7 @@ static inline void update_edge_detect(struct pxa_gpio_chip *c)static int pxa_gpio_irq_type (struct irq_data *d,unsigned int type) {struct pxa_gpio_chip *c; -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);unsigned long gpdr, mask =GPIO_bit (gpio); c =gpio_to_pxachip (gpio);@@ -383,7 +350,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)static void pxa_ack_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);writel_relaxed (GPIO_bit (gpio), c->regbase +GEDR_OFFSET );@@ -391,7 +358,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)static void pxa_mask_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);uint32_t grer, gfer;@@ -405,7 +372,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)static int pxa_gpio_set_wake (struct irq_data *d,unsigned int on) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio);if (c->set_wake)@@ -416,7 +383,7 @@ static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on)static void pxa_unmask_muxed_gpio (struct irq_data *d) { -int gpio =pxa_irq_to_gpio (d->irq); +int gpio =pxa_irq_to_gpio (d);struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); c->irq_mask |=GPIO_bit (gpio);@@ -469,13 +436,6 @@ static int pxa_gpio_nums(void)return count; } -#ifdef CONFIG_OF -static struct of_device_id pxa_gpio_dt_ids[] = { - { .compatible ="mrvl,pxa-gpio" }, - { .compatible ="mrvl,mmp-gpio" , .data = (void *)MMP_GPIO }, - {} -}; -static int pxa_irq_domain_map (struct irq_domain *d,unsigned int irq,irq_hw_number_t hw) {@@ -485,11 +445,18 @@ static int pxa_irq_domain_map(struct irq_domain *d, unsigned int irq,return 0 ; } -const struct irq_domain_ops pxa_irq_domain_ops = { +static const struct irq_domain_ops pxa_irq_domain_ops = { .map = pxa_irq_domain_map, .xlate = irq_domain_xlate_twocell, }; +#ifdef CONFIG_OF +static struct of_device_id pxa_gpio_dt_ids[] = { + { .compatible ="mrvl,pxa-gpio" }, + { .compatible ="mrvl,mmp-gpio" , .data = (void *)MMP_GPIO }, + {} +}; +static int pxa_gpio_probe_dt (struct platform_device *pdev) {int ret, nr_banks, nr_gpios;@@ -528,14 +495,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) nr_gpios = nr_banks <<5 ; pxa_last_gpio = nr_gpios -1 ; - irq_base =irq_alloc_descs (-1 ,0 , nr_gpios,0 ); -if (irq_base <0 ) { -dev_err (&pdev->dev,"Failed to allocate IRQ numbers\n" ); - goto err; - } - domain =irq_domain_add_legacy (np, nr_gpios, irq_base,0 , - &pxa_irq_domain_ops,NULL ); - pxa_gpio_of_node = np;return 0 ; err:iounmap (gpio_reg_base);@@ -545,6 +504,56 @@ err:#define pxa_gpio_probe_dt (pdev) (-1)#endif +static int pxa_init_gpio_chip (struct platform_device *pdev,int gpio_end, +int (*set_wake)(unsigned int ,unsigned int )) +{ +int i, gpio, nbanks =gpio_to_bank (gpio_end) +1 ; +struct pxa_gpio_chip *chips; + + chips =devm_kzalloc (&pdev->dev, nbanks *sizeof (*chips),GFP_KERNEL ); +if (chips ==NULL ) { +pr_err ("%s: failed to allocate GPIO chips\n" , __func__); +return -ENOMEM ; + } + +for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { +struct gpio_chip *c = &chips[i].chip; + +sprintf (chips[i].label,"gpio-%d" , i); + chips[i].regbase = gpio_reg_base +BANK_OFF (i); + chips[i].set_wake = set_wake; + + c->base = gpio; + c->label = chips[i].label; + + c->direction_input = pxa_gpio_direction_input; + c->direction_output = pxa_gpio_direction_output; + c->get = pxa_gpio_get; + c->set = pxa_gpio_set; + c->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + c->of_node = pxa_gpio_of_node; + c->of_xlate = pxa_gpio_of_xlate; + c->of_gpio_n_cells =2 ; +#endif + +/* number of GPIOs on last bank may be less than 32 */ + c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; + + chips[i].irq_base =irq_alloc_descs (-1 ,0 , c->ngpio,0 ); +if (chips[i].irq_base <0 ) +return -EINVAL ; +if (!irq_domain_add_legacy (pdev->dev.of_node, c->ngpio, + chips[i].irq_base,0 , + &pxa_irq_domain_ops, &chips[i])) +return -ENODEV ; + +gpiochip_add (c); + } + pxa_gpio_chips = chips; +return 0 ; +} +static int pxa_gpio_probe (struct platform_device *pdev) {struct pxa_gpio_chip *c;@@ -557,14 +566,6 @@ static int pxa_gpio_probe(struct platform_device *pdev) ret =pxa_gpio_probe_dt (pdev);if (ret <0 ) { pxa_last_gpio =pxa_gpio_nums (); -#ifdef CONFIG_ARCH_PXA -if (gpio_is_pxa_type (gpio_type)) - irq_base =PXA_GPIO_TO_IRQ (0 ); -#endif -#ifdef CONFIG_ARCH_MMP -if (gpio_is_mmp_type (gpio_type)) - irq_base =MMP_GPIO_TO_IRQ (0 ); -#endif }else { use_of =1 ; }@@ -604,7 +605,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* Initialize GPIO chips */ info =dev_get_platdata (&pdev->dev); -pxa_init_gpio_chip (pxa_last_gpio, info ? info->gpio_set_wake :NULL ); +pxa_init_gpio_chip (pdev, pxa_last_gpio, + info ? info->gpio_set_wake :NULL );/* clear all GPIO edge detects */ for_each_gpio_chip (gpio, c) {include/linux/gpio-pxa.h +3
-1@@ -1,6 +1,8 @@#ifndef __GPIO_PXA_H#define __GPIO_PXA_H +#include <linux/irq.h> +#define GPIO_bit (x) (1 << ((x) & 0x1f))#define gpio_to_bank (gpio) ((gpio) >> 5)@@ -11,7 +13,7 @@*/ extern int pxa_last_gpio; -extern int pxa_irq_to_gpio (int irq); +extern int pxa_irq_to_gpio (struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */
Signature · 2 lines
Regards, Igor.
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 10 lines · Igor Grinberg
Quoted 5 lines · Haojian Zhuang
Avoid to use global
irq_basein gpio-pxa driver. Defineirq_basein eachpxa_gpio_chipinstead. Then we can avoid to use macroPXA_GPIO_TO_IRQ()&MMP_GPIO_TO_IRQ().Signed-off-by Haojian Zhuang <[email protected]>Ok. This patch breaks the NFS root on my PXA based systems. I still haven't found the cause of the breakage.
It's so strange. I tested it OK on pxa910 without DT. Could you help to check whether your GPIO interrupt still works?
Regards
Haojian
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 6 lines · Haojian Zhuang
Quoted 5 lines · Igor Grinberg
Quoted 4 lines · Haojian Zhuang
Avoid to use global
irq_basein gpio-pxa driver. Defineirq_basein eachpxa_gpio_chipinstead. Then we can avoid to use macroPXA_GPIO_TO_IRQ()&MMP_GPIO_TO_IRQ().
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Haojian Zhuang <[email protected]>Ok. This patch breaks the NFS root on my PXA based systems. I still haven't found the cause of the breakage.
It's so strange. I tested it OK on pxa910 without DT. Could you help to check whether your GPIO interrupt still works?
It looks like I've figured this out...
For em-x270 as an example, if I move the IRQ resource assignment to runtime:
arch/arm/mach-pxa/em-x270.c +3 -2
@@ -210,8 +210,6 @@ static struct resource em_x270_dm9000_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } };
@@ -232,6 +230,9 @@ static struct platform_device em_x270_dm9000 = {static void __init em_x270_init_dm9000 (void ) { + em_x270_dm9000_resource[2 ].start =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_resource[2 ].end =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_platdata.flags |= dm9000_flags;platform_device_register (&em_x270_dm9000); }
The Ethernet is alive and NFS root works fine.
So my conclusion, is that we still need to have some work done before we can switch to using IRQ_DOMAIN.
As you can see from above patch, we at least must deal with the PXA_GPIO_TO_IRQ macros and alike that have compile time assumptions which obviously get broken once you switch to the IRQ_DOMAIN.
What do you think?
Signature · 2 lines
Regards, Igor.
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 29 lines · Igor Grinberg
It looks like I've figured this out...
For em-x270 as an example, if I move the IRQ resource assignment to runtime:arch/arm/mach-pxa/em-x270.c +3
-2@@ -210,8 +210,6 @@ static struct resource em_x270_dm9000_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } };@@ -232,6 +230,9 @@ static struct platform_device em_x270_dm9000 = {static void __init em_x270_init_dm9000 (void ) { + em_x270_dm9000_resource[2 ].start =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_resource[2 ].end =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_platdata.flags |= dm9000_flags;platform_device_register (&em_x270_dm9000); }The Ethernet is alive and NFS root works fine.
Quoted 7 lines
So my conclusion, is that we still need to have some work done before we can switch to using
IRQ_DOMAIN.
As you can see from above patch, we at least must deal with thePXA_GPIO_TO_IRQmacros and alike that have compile time assumptions which obviously get broken once you switch to theIRQ_DOMAIN.What do you think?
I think it seems like you should review all the IRQ assignments in that former GPIO range. Statically encoding IRQ numbers for GPIO things is usually not a good idea, it's better to always use gpio_to_irq() on these and only keep hard-coded GPIO numbers around (atleast just *one* problem to worry about).
Your,
Linus Walleij
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 37 lines · Linus Walleij
Quoted 35 lines · Igor Grinberg
It looks like I've figured this out...
For em-x270 as an example, if I move the IRQ resource assignment to runtime:arch/arm/mach-pxa/em-x270.c +3
-2@@ -210,8 +210,6 @@ static struct resource em_x270_dm9000_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } };@@ -232,6 +230,9 @@ static struct platform_device em_x270_dm9000 = {static void __init em_x270_init_dm9000 (void ) { + em_x270_dm9000_resource[2 ].start =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_resource[2 ].end =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_platdata.flags |= dm9000_flags;platform_device_register (&em_x270_dm9000); }The Ethernet is alive and NFS root works fine.
So my conclusion, is that we still need to have some work done before we can switch to using
IRQ_DOMAIN.
As you can see from above patch, we at least must deal with thePXA_GPIO_TO_IRQmacros and alike that have compile time assumptions which obviously get broken once you switch to theIRQ_DOMAIN.
Quoted 7 lines
Quoted 1 line
What do you think?
I think it seems like you should review all the IRQ assignments in that former GPIO range. Statically encoding IRQ numbers for GPIO things is usually not a good idea, it's better to always use
gpio_to_irq()on these and only keep hard-coded GPIO numbers around (atleast just *one* problem to worry about).
Well, it always worked like this...
Now it is clear that we cannot continue doing it
(at least not with current IRQ_DOMAIN).
In order to merge this patch, we need to either remove
the static PXA_GPIO_TO_IRQ macros and alike, or teach the IRQ_DOMAIN somehow to know about these.
I don't know what from the above is easier to do, as I did not looked deeper into this.
I might have some time to look into this in two weeks from now, but I guess it will be too late as Haojian wants this patch set to go into 3.9.
Signature · 2 lines
Regards, Igor.
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
Quoted 5 lines · Igor Grinberg
In order to merge this patch, we need to either remove
the staticPXA_GPIO_TO_IRQmacros and alike, or teach theIRQ_DOMAINsomehow to know about these.
I don't know what from the above is easier to do, as I did not looked deeper into this.
I think it's quite easy to get the irqdomain in place and working correctly. It's intended to solve exactly this kind of thing.
Quoted 3 lines
I might have some time to look into this in two weeks from now, but I guess it will be too late as Haojian wants this patch set to go into 3.9.
This patch as outlined by me in the previous comments, with a complete working irqdomain is welcome if you can get it tested.
Yours,
Linus Walleij
PATCH v2 2/10 gpio: pxa: avoid to use global irq base
In reply to Igor GrinbergQuoted 56 lines · Igor Grinberg
Quoted 37 lines · Linus Walleij
Quoted 35 lines · Igor Grinberg
It looks like I've figured this out...
For em-x270 as an example, if I move the IRQ resource assignment to runtime:arch/arm/mach-pxa/em-x270.c +3
-2@@ -210,8 +210,6 @@ static struct resource em_x270_dm9000_resource[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = EM_X270_ETHIRQ, - .end = EM_X270_ETHIRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } };@@ -232,6 +230,9 @@ static struct platform_device em_x270_dm9000 = {static void __init em_x270_init_dm9000 (void ) { + em_x270_dm9000_resource[2 ].start =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_resource[2 ].end =gpio_to_irq (GPIO41_ETHIRQ ); + em_x270_dm9000_platdata.flags |= dm9000_flags;platform_device_register (&em_x270_dm9000); }The Ethernet is alive and NFS root works fine.
So my conclusion, is that we still need to have some work done before we can switch to using
IRQ_DOMAIN.
As you can see from above patch, we at least must deal with thePXA_GPIO_TO_IRQmacros and alike that have compile time assumptions which obviously get broken once you switch to theIRQ_DOMAIN.Quoted 7 lines
Quoted 1 line
What do you think?
I think it seems like you should review all the IRQ assignments in that former GPIO range. Statically encoding IRQ numbers for GPIO things is usually not a good idea, it's better to always use
gpio_to_irq()on these and only keep hard-coded GPIO numbers around (atleast just *one* problem to worry about).Well, it always worked like this...
Now it is clear that we cannot continue doing it
(at least not with currentIRQ_DOMAIN).In order to merge this patch, we need to either remove
the staticPXA_GPIO_TO_IRQmacros and alike, or teach theIRQ_DOMAINsomehow to know about these.
I don't know what from the above is easier to do, as I did not looked deeper into this.
Quoted 8 lines
I might have some time to look into this in two weeks from now, but I guess it will be too late as Haojian wants this patch set to go into 3.9.
--
Regards,
Igor.
I can append pdata->irq_base to resolve this issue. While I'm finished, I'll send it
out.
I don't want to change too much files in pxa directory. If I have enough time, I would put resource on supporting DT & mutliplatform on pxa. So I'll fix this issue.
Thanks
Haojian
PATCH v2 3/10 gpio: pxa: use platform data for gpio inverted
In reply to Haojian ZhuangAvoid to judge whether gpio is inverted by identifying cpu in gpio driver. Move this into platform data of gpio driver.
--- arch/arm/mach-pxa/pxa25x.c | 3 +++ drivers/gpio/gpio-pxa.c | 40 +++++++++++++++++++++++++--------------- include/linux/gpio-pxa.h | 1 + 3 files changed, 29 insertions(+), 15 deletions(-)
arch/arm/mach-pxa/pxa25x.c +3 -0
@@ -340,6 +340,9 @@ void __init pxa25x_map_io(void) }static struct pxa_gpio_platform_data pxa25x_gpio_info__initdata = { +#ifdef CONFIG_CPU_PXA26x + .inverted = true, +#endif .gpio_set_wake = gpio_set_wake, };
drivers/gpio/gpio-pxa.c +25 -15
@@ -71,6 +71,7 @@ struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase;unsigned int irq_base; +bool inverted;char label[10 ];unsigned long irq_mask;
@@ -126,9 +127,9 @@ static inline int gpio_is_mmp_type(int type)/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted, * as well as their Alternate Function value being '1' for GPIO in GAFRx. */ -static inline int __gpio_is_inverted (int gpio) +static inline int __gpio_is_inverted (struct pxa_gpio_chip *chip,int gpio) { -if ((gpio_type ==PXA26X_GPIO ) && (gpio >85 )) +if ((chip->inverted) && (gpio >85 ))return 1 ;return 0 ; }
@@ -139,15 +140,13 @@ static inline int __gpio_is_inverted(int gpio)* is attributed as "occupied" here (I know this terminology isn't * accurate, you are welcome to propose a better one :-) */ -static inline int __gpio_is_occupied (unsigned gpio) +static inline int __gpio_is_occupied (struct pxa_gpio_chip *chip,unsigned gpio) { -struct pxa_gpio_chip *pxachip;void __iomem *base;unsigned long gafr =0 , gpdr =0 ;int ret, af =0 , dir =0 ; - pxachip =gpio_to_pxachip (gpio); - base =gpio_chip_base (&pxachip->chip); + base =gpio_chip_base (&chip->chip); gpdr =readl_relaxed (base +GPDR_OFFSET );switch (gpio_type) {
@@ -158,7 +157,7 @@ static inline int __gpio_is_occupied(unsigned gpio) af = (gafr >> ((gpio &0xf ) *2 )) &0x3 ; dir = gpdr &GPIO_bit (gpio); -if (__gpio_is_inverted (gpio)) +if (__gpio_is_inverted (chip, gpio)) ret = (af !=1 ) || (dir ==0 );else ret = (af !=0 ) || (dir !=0 );
@@ -188,16 +187,19 @@ int pxa_irq_to_gpio(struct irq_data *d)return gpio; } -static int pxa_gpio_direction_input (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_direction_input (struct gpio_chip *gc,unsigned offset) { -void __iomem *base =gpio_chip_base (chip); +struct pxa_gpio_chip *chip =NULL ; +void __iomem *base =gpio_chip_base (gc);uint32_t value, mask =1 << offset;unsigned long flags; + chip = container_of(gc, struct pxa_gpio_chip, chip); +spin_lock_irqsave (&gpio_lock, flags); value =readl_relaxed (base +GPDR_OFFSET ); -if (__gpio_is_inverted (chip->base + offset)) +if (__gpio_is_inverted (chip, gc->base + offset)) value |= mask;else value &= ~mask;
@@ -207,19 +209,22 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)return 0 ; } -static int pxa_gpio_direction_output (struct gpio_chip *chip, +static int pxa_gpio_direction_output (struct gpio_chip *gc,unsigned offset,int value) { -void __iomem *base =gpio_chip_base (chip); +struct pxa_gpio_chip *chip =NULL ; +void __iomem *base =gpio_chip_base (gc);uint32_t tmp, mask =1 << offset;unsigned long flags; + chip = container_of(gc, struct pxa_gpio_chip, chip); +writel_relaxed (mask, base + (value ?GPSR_OFFSET :GPCR_OFFSET ));spin_lock_irqsave (&gpio_lock, flags); tmp =readl_relaxed (base +GPDR_OFFSET ); -if (__gpio_is_inverted (chip->base + offset)) +if (__gpio_is_inverted (chip, gc->base + offset)) tmp &= ~mask;else tmp |= mask;
@@ -288,7 +293,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)if ((c->irq_edge_rise | c->irq_edge_fall) &GPIO_bit (gpio))return 0 ; -if (__gpio_is_occupied (gpio)) +if (__gpio_is_occupied (c, gpio))return 0 ; type =IRQ_TYPE_EDGE_RISING |IRQ_TYPE_EDGE_FALLING ;
@@ -296,7 +301,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); -if (__gpio_is_inverted (gpio)) +if (__gpio_is_inverted (c, gpio))writel_relaxed (gpdr | mask, c->regbase +GPDR_OFFSET );else writel_relaxed (gpdr & ~mask, c->regbase +GPDR_OFFSET );
@@ -474,6 +479,9 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)return -ENOMEM ;if (of_find_property (np,"marvell,gpio-ed-mask" ,NULL )) pdata->ed_mask = true; +/* It's only valid for PXA26x */ +if (of_find_property (np,"marvell,gpio-inverted" ,NULL )) + pdata->inverted = true;/* set the platform data */ pdev->dev.platform_data = pdata; gpio_type = (int )of_id->data;
@@ -616,6 +624,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* unmask GPIO edge detect for AP side */ if (info->ed_mask)writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); +/* update for gpio inverted */ + c->inverted = info->inverted; }if (!use_of) {
include/linux/gpio-pxa.h +1 -0
@@ -17,6 +17,7 @@ extern int pxa_irq_to_gpio(struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ +bool inverted;/* only valid for PXA26x */ int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 1 line
1.7.10.4
PATCH v2 3/10 gpio: pxa: use platform data for gpio inverted
Quoted 4 lines · Haojian Zhuang
Avoid to judge whether gpio is inverted by identifying cpu in gpio driver. Move this into platform data of gpio driver.
Signed-off-by Haojian Zhuang <[email protected]>
Quoted 170 lines
--- arch/arm/mach-pxa/pxa25x.c | 3 +++ drivers/gpio/gpio-pxa.c | 40 +++++++++++++++++++++++++--------------- include/linux/gpio-pxa.h | 1 + 3 files changed, 29 insertions(+), 15 deletions(-)arch/arm/mach-pxa/pxa25x.c +3
-0@@ -340,6 +340,9 @@ void __init pxa25x_map_io(void) }static struct pxa_gpio_platform_data pxa25x_gpio_info__initdata = { +#ifdef CONFIG_CPU_PXA26x + .inverted = true, +#endif .gpio_set_wake = gpio_set_wake, };drivers/gpio/gpio-pxa.c +25
-15@@ -71,6 +71,7 @@ struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase;unsigned int irq_base; +bool inverted;char label[10 ];unsigned long irq_mask;@@ -126,9 +127,9 @@ static inline int gpio_is_mmp_type(int type)/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted, * as well as their Alternate Function value being '1' for GPIO in GAFRx. */ -static inline int __gpio_is_inverted (int gpio) +static inline int __gpio_is_inverted (struct pxa_gpio_chip *chip,int gpio) { -if ((gpio_type ==PXA26X_GPIO ) && (gpio >85 )) +if ((chip->inverted) && (gpio >85 ))return 1 ;return 0 ; }@@ -139,15 +140,13 @@ static inline int __gpio_is_inverted(int gpio)* is attributed as "occupied" here (I know this terminology isn't * accurate, you are welcome to propose a better one :-) */ -static inline int __gpio_is_occupied (unsigned gpio) +static inline int __gpio_is_occupied (struct pxa_gpio_chip *chip,unsigned gpio) { -struct pxa_gpio_chip *pxachip;void __iomem *base;unsigned long gafr =0 , gpdr =0 ;int ret, af =0 , dir =0 ; - pxachip =gpio_to_pxachip (gpio); - base =gpio_chip_base (&pxachip->chip); + base =gpio_chip_base (&chip->chip); gpdr =readl_relaxed (base +GPDR_OFFSET );switch (gpio_type) {@@ -158,7 +157,7 @@ static inline int __gpio_is_occupied(unsigned gpio) af = (gafr >> ((gpio &0xf ) *2 )) &0x3 ; dir = gpdr &GPIO_bit (gpio); -if (__gpio_is_inverted (gpio)) +if (__gpio_is_inverted (chip, gpio)) ret = (af !=1 ) || (dir ==0 );else ret = (af !=0 ) || (dir !=0 );@@ -188,16 +187,19 @@ int pxa_irq_to_gpio(struct irq_data *d)return gpio; } -static int pxa_gpio_direction_input (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_direction_input (struct gpio_chip *gc,unsigned offset) { -void __iomem *base =gpio_chip_base (chip); +struct pxa_gpio_chip *chip =NULL ; +void __iomem *base =gpio_chip_base (gc);uint32_t value, mask =1 << offset;unsigned long flags; + chip = container_of(gc, struct pxa_gpio_chip, chip); +spin_lock_irqsave (&gpio_lock, flags); value =readl_relaxed (base +GPDR_OFFSET ); -if (__gpio_is_inverted (chip->base + offset)) +if (__gpio_is_inverted (chip, gc->base + offset)) value |= mask;else value &= ~mask;@@ -207,19 +209,22 @@ static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)return 0 ; } -static int pxa_gpio_direction_output (struct gpio_chip *chip, +static int pxa_gpio_direction_output (struct gpio_chip *gc,unsigned offset,int value) { -void __iomem *base =gpio_chip_base (chip); +struct pxa_gpio_chip *chip =NULL ; +void __iomem *base =gpio_chip_base (gc);uint32_t tmp, mask =1 << offset;unsigned long flags; + chip = container_of(gc, struct pxa_gpio_chip, chip); +writel_relaxed (mask, base + (value ?GPSR_OFFSET :GPCR_OFFSET ));spin_lock_irqsave (&gpio_lock, flags); tmp =readl_relaxed (base +GPDR_OFFSET ); -if (__gpio_is_inverted (chip->base + offset)) +if (__gpio_is_inverted (chip, gc->base + offset)) tmp &= ~mask;else tmp |= mask;@@ -288,7 +293,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)if ((c->irq_edge_rise | c->irq_edge_fall) &GPIO_bit (gpio))return 0 ; -if (__gpio_is_occupied (gpio)) +if (__gpio_is_occupied (c, gpio))return 0 ; type =IRQ_TYPE_EDGE_RISING |IRQ_TYPE_EDGE_FALLING ;@@ -296,7 +301,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); -if (__gpio_is_inverted (gpio)) +if (__gpio_is_inverted (c, gpio))writel_relaxed (gpdr | mask, c->regbase +GPDR_OFFSET );else writel_relaxed (gpdr & ~mask, c->regbase +GPDR_OFFSET );@@ -474,6 +479,9 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)return -ENOMEM ;if (of_find_property (np,"marvell,gpio-ed-mask" ,NULL )) pdata->ed_mask = true; +/* It's only valid for PXA26x */ +if (of_find_property (np,"marvell,gpio-inverted" ,NULL )) + pdata->inverted = true;/* set the platform data */ pdev->dev.platform_data = pdata; gpio_type = (int )of_id->data;@@ -616,6 +624,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* unmask GPIO edge detect for AP side */ if (info->ed_mask)writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); +/* update for gpio inverted */ + c->inverted = info->inverted; }if (!use_of) {include/linux/gpio-pxa.h +1
-0@@ -17,6 +17,7 @@ extern int pxa_irq_to_gpio(struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ +bool inverted;/* only valid for PXA26x */ int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 2 lines
Regards, Igor.
PATCH v2 4/10 gpio: pxa: remove gpio_type
In reply to Haojian ZhuangSince gpio_type is used to check whether gafr register is valid. So move it into platform data.
--- arch/arm/mach-pxa/pxa25x.c | 1 + arch/arm/mach-pxa/pxa27x.c | 1 + drivers/gpio/gpio-pxa.c | 43 ++++++------------------------------------- include/linux/gpio-pxa.h | 1 + 4 files changed, 9 insertions(+), 37 deletions(-)
arch/arm/mach-pxa/pxa25x.c +1 -0
@@ -343,6 +343,7 @@ static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {#ifdef CONFIG_CPU_PXA26x .inverted = true, #endif + .gafr = true, .gpio_set_wake = gpio_set_wake, };
arch/arm/mach-pxa/pxa27x.c +1 -0
@@ -430,6 +430,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) }static struct pxa_gpio_platform_data pxa27x_gpio_info__initdata = { + .gafr = true, .gpio_set_wake = gpio_set_wake, };
drivers/gpio/gpio-pxa.c +6 -37
118 lines not on this page · raw message
include/linux/gpio-pxa.h +1 -0
@@ -18,6 +18,7 @@ extern int pxa_irq_to_gpio(struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ bool inverted;/* only valid for PXA26x */ +bool gafr;/* only valid for PXA25x/PXA26x/PXA27x */ int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 1 line
1.7.10.4
PATCH v2 4/10 gpio: pxa: remove gpio_type
Quoted 4 lines · Haojian Zhuang
Since
gpio_typeis used to check whether gafr register is valid. So move it into platform data.Signed-off-by Haojian Zhuang <[email protected]>
Quoted 175 lines
--- arch/arm/mach-pxa/pxa25x.c | 1 + arch/arm/mach-pxa/pxa27x.c | 1 + drivers/gpio/gpio-pxa.c | 43 ++++++------------------------------------- include/linux/gpio-pxa.h | 1 + 4 files changed, 9 insertions(+), 37 deletions(-)arch/arm/mach-pxa/pxa25x.c +1
-0@@ -343,6 +343,7 @@ static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = {#ifdef CONFIG_CPU_PXA26x .inverted = true, #endif + .gafr = true, .gpio_set_wake = gpio_set_wake, };arch/arm/mach-pxa/pxa27x.c +1
-0@@ -430,6 +430,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) }static struct pxa_gpio_platform_data pxa27x_gpio_info__initdata = { + .gafr = true, .gpio_set_wake = gpio_set_wake, };drivers/gpio/gpio-pxa.c +6
-37@@ -72,6 +72,7 @@ struct pxa_gpio_chip {void __iomem *regbase;unsigned int irq_base;bool inverted; +bool gafr;char label[10 ];unsigned long irq_mask;@@ -87,18 +88,8 @@ struct pxa_gpio_chip {#endif }; -enum { -PXA25X_GPIO =0 , -PXA26X_GPIO , -PXA27X_GPIO , -PXA3XX_GPIO , -PXA93X_GPIO , -MMP_GPIO =0x10 , -}; -static DEFINE_SPINLOCK (gpio_lock);static struct pxa_gpio_chip *pxa_gpio_chips; -static int gpio_type;static void __iomem *gpio_reg_base;#define for_each_gpio_chip (i, c) \@@ -114,16 +105,6 @@ static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)return &pxa_gpio_chips[gpio_to_bank (gpio)]; } -static inline int gpio_is_pxa_type (int type) -{ -return (type &MMP_GPIO ) ==0 ; -} - -static inline int gpio_is_mmp_type (int type) -{ -return (type &MMP_GPIO ) !=0 ; -} -/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted, * as well as their Alternate Function value being '1' for GPIO in GAFRx. */ @@ -149,10 +130,7 @@ static inline int __gpio_is_occupied(struct pxa_gpio_chip *chip, unsigned gpio) base =gpio_chip_base (&chip->chip); gpdr =readl_relaxed (base +GPDR_OFFSET ); -switch (gpio_type) { -case PXA25X_GPIO : -case PXA26X_GPIO : -case PXA27X_GPIO : +if (chip->gafr) { gafr =readl_relaxed (base +GAFR_OFFSET ); af = (gafr >> ((gpio &0xf ) *2 )) &0x3 ; dir = gpdr &GPIO_bit (gpio);@@ -161,10 +139,8 @@ static inline int __gpio_is_occupied(struct pxa_gpio_chip *chip, unsigned gpio) ret = (af !=1 ) || (dir ==0 ); else ret = (af !=0 ) || (dir !=0 ); -break ; -default : + }else { ret = gpdr &GPIO_bit (gpio); -break ; }return ret; }@@ -412,30 +388,23 @@ static int pxa_gpio_nums(void)if (cpu_is_pxa25x ()) {#ifdef CONFIG_CPU_PXA26x count =89 ; - gpio_type =PXA26X_GPIO ;#elif defined(CONFIG_PXA25x) count =84 ; - gpio_type =PXA26X_GPIO ;#endif /* CONFIG_CPU_PXA26x */ }else if (cpu_is_pxa27x ()) { count =120 ; - gpio_type =PXA27X_GPIO ; }else if (cpu_is_pxa93x ()) { count =191 ; - gpio_type =PXA93X_GPIO ; }else if (cpu_is_pxa3xx ()) { count =127 ; - gpio_type =PXA3XX_GPIO ; }#endif /* CONFIG_ARCH_PXA */ #ifdef CONFIG_ARCH_MMP if (cpu_is_pxa168 () ||cpu_is_pxa910 ()) { count =127 ; - gpio_type =MMP_GPIO ; }else if (cpu_is_mmp2 ()) { count =191 ; - gpio_type =MMP_GPIO ; }#endif /* CONFIG_ARCH_MMP */ return count;@@ -458,7 +427,7 @@ static const struct irq_domain_ops pxa_irq_domain_ops = {#ifdef CONFIG_OF static struct of_device_id pxa_gpio_dt_ids[] = { { .compatible ="mrvl,pxa-gpio" }, - { .compatible ="mrvl,mmp-gpio" , .data = (void *)MMP_GPIO }, + { .compatible ="mrvl,mmp-gpio" }, {} };@@ -484,7 +453,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) pdata->inverted = true;/* set the platform data */ pdev->dev.platform_data = pdata; - gpio_type = (int )of_id->data; next =of_get_next_child (np,NULL ); prev = next;@@ -624,8 +592,9 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* unmask GPIO edge detect for AP side */ if (info->ed_mask)writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); -/* update for gpio inverted */ +/* update for gpio inverted & gafr */ c->inverted = info->inverted; + c->gafr = info->gafr; }if (!use_of) {include/linux/gpio-pxa.h +1
-0@@ -18,6 +18,7 @@ extern int pxa_irq_to_gpio(struct irq_data *d);struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ bool inverted;/* only valid for PXA26x */ +bool gafr;/* only valid for PXA25x/PXA26x/PXA27x */ int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 2 lines
Regards, Igor.
PATCH v2 5/10 gpio: pxa: define nr gpios in platform data
In reply to Haojian ZhuangAvoid to define gpio numbers in gpio driver. Define it in platform data instead.
--- arch/arm/mach-mmp/aspenite.c | 1 + arch/arm/mach-mmp/avengers_lite.c | 1 + arch/arm/mach-mmp/brownstone.c | 1 + arch/arm/mach-mmp/flint.c | 1 + arch/arm/mach-mmp/gplugd.c | 1 + arch/arm/mach-mmp/tavorevb.c | 1 + arch/arm/mach-mmp/teton_bga.c | 1 + arch/arm/mach-mmp/ttc_dkb.c | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +++ arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 15 +++++++++++- drivers/gpio/gpio-pxa.c | 48 +++++++------------------------------ include/linux/gpio-pxa.h | 1 + 13 files changed, 35 insertions(+), 41 deletions(-)
arch/arm/mach-mmp/aspenite.c +1 -0
@@ -112,6 +112,7 @@ static unsigned long common_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/avengers_lite.c +1 -0
@@ -34,6 +34,7 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/brownstone.c +1 -0
@@ -106,6 +106,7 @@ static unsigned long brownstone_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };
arch/arm/mach-mmp/flint.c +1 -0
@@ -79,6 +79,7 @@ static unsigned long flint_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };
arch/arm/mach-mmp/gplugd.c +1 -0
@@ -129,6 +129,7 @@ static unsigned long gplugd_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/tavorevb.c +1 -0
@@ -62,6 +62,7 @@ static unsigned long tavorevb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/teton_bga.c +1 -0
@@ -51,6 +51,7 @@ static unsigned long teton_bga_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/ttc_dkb.c +1 -0
@@ -75,6 +75,7 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-pxa/pxa25x.c +3 -0
@@ -342,6 +342,9 @@ void __init pxa25x_map_io(void)static struct pxa_gpio_platform_data pxa25x_gpio_info__initdata = { #ifdef CONFIG_CPU_PXA26x .inverted = true, + .nr_gpios =90 , +#else + .nr_gpios =85 , #endif .gafr = true, .gpio_set_wake = gpio_set_wake,
arch/arm/mach-pxa/pxa27x.c +1 -0
@@ -431,6 +431,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)static struct pxa_gpio_platform_data pxa27x_gpio_info__initdata = { .gafr = true, + .nr_gpios =121 , .gpio_set_wake = gpio_set_wake, };
arch/arm/mach-pxa/pxa3xx.c +14 -1
@@ -435,6 +435,10 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)pxa_register_device (&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_info__initdata = { + .nr_gpios =128 , +}; +static struct platform_device *devices[]__initdata = { &pxa_device_gpio, &pxa27x_device_udc,
@@ -482,8 +486,17 @@ static int __init pxa3xx_init(void)register_syscore_ops (&pxa3xx_mfp_syscore_ops);register_syscore_ops (&pxa3xx_clock_syscore_ops); -if (!of_have_populated_dt ()) +if (!of_have_populated_dt ()) { +if (cpu_is_pxa93x ()) + pxa3xx_gpio_info.nr_gpios =192 ; + ret =platform_device_add_data (&pxa_device_gpio, + &pxa3xx_gpio_info, + sizeof(struct pxa_gpio_platform_data); +if (ret <0 ) +break ; + ret =platform_add_devices (devices,ARRAY_SIZE (devices)); + } }return ret;
drivers/gpio/gpio-pxa.c +8 -40
85 lines not on this page · raw message
include/linux/gpio-pxa.h +1 -0
@@ -19,6 +19,7 @@ struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ bool inverted;/* only valid for PXA26x */ bool gafr;/* only valid for PXA25x/PXA26x/PXA27x */ +unsigned nr_gpios;int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 1 line
1.7.10.4
PATCH v2 5/10 gpio: pxa: define nr gpios in platform data
Hi Haojian,
Quoted 4 lines · Haojian Zhuang
Avoid to define gpio numbers in gpio driver. Define it in platform data instead.
Signed-off-by Haojian Zhuang <[email protected]>
Same comments as for previous version...
Quoted 15 lines
--- arch/arm/mach-mmp/aspenite.c | 1 + arch/arm/mach-mmp/avengers_lite.c | 1 + arch/arm/mach-mmp/brownstone.c | 1 + arch/arm/mach-mmp/flint.c | 1 + arch/arm/mach-mmp/gplugd.c | 1 + arch/arm/mach-mmp/tavorevb.c | 1 + arch/arm/mach-mmp/teton_bga.c | 1 + arch/arm/mach-mmp/ttc_dkb.c | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +++ arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 15 +++++++++++- drivers/gpio/gpio-pxa.c | 48 +++++++------------------------------ include/linux/gpio-pxa.h | 1 + 13 files changed, 35 insertions(+), 41 deletions(-)
[...]
arch/arm/mach-pxa/pxa3xx.c void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info) · line 441
Quoted 12 lines
arch/arm/mach-pxa/pxa3xx.c +4
-0@@ -435,6 +435,10 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)pxa_register_device (&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_info__initdata = { + .nr_gpios =128 , +}; +
missing
#include <linux/gpio-pxa.h>
Quoted 4 lines
arch/arm/mach-pxa/pxa3xx.c +0
-0static struct platform_device *devices[]__initdata = { &pxa_device_gpio, &pxa27x_device_udc,
arch/arm/mach-pxa/pxa3xx.c static int __init pxa3xx_init(void) · line 494
Quoted 10 lines
arch/arm/mach-pxa/pxa3xx.c +6
-1@@ -482,8 +486,17 @@ static int __init pxa3xx_init(void)register_syscore_ops (&pxa3xx_mfp_syscore_ops);register_syscore_ops (&pxa3xx_clock_syscore_ops); -if (!of_have_populated_dt ()) +if (!of_have_populated_dt ()) { +if (cpu_is_pxa93x ()) + pxa3xx_gpio_info.nr_gpios =192 ; + ret =platform_device_add_data (&pxa_device_gpio, + &pxa3xx_gpio_info, + sizeof(struct pxa_gpio_platform_data);
Closing parenthesis is missing...
Quoted 8 lines
arch/arm/mach-pxa/pxa3xx.c +4
-0+if (ret <0 ) +break ; + ret =platform_add_devices (devices,ARRAY_SIZE (devices)); + } }return ret;
[...]
Signature · 2 lines
Regards, Igor.
PATCH v2 5/11 gpio: pxa: define nr gpios in platform data
Avoid to define gpio numbers in gpio driver. Define it in platform data instead.
--- arch/arm/mach-mmp/aspenite.c | 1 + arch/arm/mach-mmp/avengers_lite.c | 1 + arch/arm/mach-mmp/brownstone.c | 1 + arch/arm/mach-mmp/flint.c | 1 + arch/arm/mach-mmp/gplugd.c | 1 + arch/arm/mach-mmp/tavorevb.c | 1 + arch/arm/mach-mmp/teton_bga.c | 1 + arch/arm/mach-mmp/ttc_dkb.c | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +++ arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 17 +++++++++++-- drivers/gpio/gpio-pxa.c | 48 +++++++------------------------------ include/linux/gpio-pxa.h | 1 + 13 files changed, 36 insertions(+), 42 deletions(-)
arch/arm/mach-mmp/aspenite.c +1 -0
@@ -112,6 +112,7 @@ static unsigned long common_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/avengers_lite.c +1 -0
@@ -34,6 +34,7 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/brownstone.c +1 -0
@@ -106,6 +106,7 @@ static unsigned long brownstone_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };
arch/arm/mach-mmp/flint.c +1 -0
@@ -79,6 +79,7 @@ static unsigned long flint_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };
arch/arm/mach-mmp/gplugd.c +1 -0
@@ -129,6 +129,7 @@ static unsigned long gplugd_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/tavorevb.c +1 -0
@@ -62,6 +62,7 @@ static unsigned long tavorevb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/teton_bga.c +1 -0
@@ -51,6 +51,7 @@ static unsigned long teton_bga_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-mmp/ttc_dkb.c +1 -0
@@ -75,6 +75,7 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };
arch/arm/mach-pxa/pxa25x.c +3 -0
@@ -342,6 +342,9 @@ void __init pxa25x_map_io(void)static struct pxa_gpio_platform_data pxa25x_gpio_info__initdata = { #ifdef CONFIG_CPU_PXA26x .inverted = true, + .nr_gpios =90 , +#else + .nr_gpios =85 , #endif .gafr = true, .gpio_set_wake = gpio_set_wake,
arch/arm/mach-pxa/pxa27x.c +1 -0
@@ -431,6 +431,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)static struct pxa_gpio_platform_data pxa27x_gpio_info__initdata = { .gafr = true, + .nr_gpios =121 , .gpio_set_wake = gpio_set_wake, };
arch/arm/mach-pxa/pxa3xx.c +15 -2
@@ -15,6 +15,7 @@#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/gpio-pxa.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h>
@@ -435,6 +436,10 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)pxa_register_device (&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_info__initdata = { + .nr_gpios =128 , +}; +static struct platform_device *devices[]__initdata = { &pxa_device_gpio, &pxa27x_device_udc,
@@ -482,8 +487,16 @@ static int __init pxa3xx_init(void)register_syscore_ops (&pxa3xx_mfp_syscore_ops);register_syscore_ops (&pxa3xx_clock_syscore_ops); -if (!of_have_populated_dt ()) - ret =platform_add_devices (devices,ARRAY_SIZE (devices)); +if (!of_have_populated_dt ()) { +if (cpu_is_pxa93x ()) + pxa3xx_gpio_info.nr_gpios =192 ; + ret =platform_device_add_data (&pxa_device_gpio, + &pxa3xx_gpio_info, +sizeof (struct pxa_gpio_platform_data )); +if (!ret) + ret =platform_add_devices (devices, +ARRAY_SIZE (devices)); + } }return ret;
drivers/gpio/gpio-pxa.c +8 -40
85 lines not on this page · raw message
include/linux/gpio-pxa.h +1 -0
@@ -19,6 +19,7 @@ struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ bool inverted;/* only valid for PXA26x */ bool gafr;/* only valid for PXA25x/PXA26x/PXA27x */ +unsigned nr_gpios;int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 1 line
1.7.10.4
PATCH v2 5/11 gpio: pxa: define nr gpios in platform data
Quoted 4 lines · Haojian Zhuang
Avoid to define gpio numbers in gpio driver. Define it in platform data instead.
Signed-off-by Haojian Zhuang <[email protected]>
Quoted 288 lines
--- arch/arm/mach-mmp/aspenite.c | 1 + arch/arm/mach-mmp/avengers_lite.c | 1 + arch/arm/mach-mmp/brownstone.c | 1 + arch/arm/mach-mmp/flint.c | 1 + arch/arm/mach-mmp/gplugd.c | 1 + arch/arm/mach-mmp/tavorevb.c | 1 + arch/arm/mach-mmp/teton_bga.c | 1 + arch/arm/mach-mmp/ttc_dkb.c | 1 + arch/arm/mach-pxa/pxa25x.c | 3 +++ arch/arm/mach-pxa/pxa27x.c | 1 + arch/arm/mach-pxa/pxa3xx.c | 17 +++++++++++-- drivers/gpio/gpio-pxa.c | 48 +++++++------------------------------ include/linux/gpio-pxa.h | 1 + 13 files changed, 36 insertions(+), 42 deletions(-)arch/arm/mach-mmp/aspenite.c +1
-0@@ -112,6 +112,7 @@ static unsigned long common_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-mmp/avengers_lite.c +1
-0@@ -34,6 +34,7 @@ static unsigned long avengers_lite_pin_config_V16F[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-mmp/brownstone.c +1
-0@@ -106,6 +106,7 @@ static unsigned long brownstone_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };arch/arm/mach-mmp/flint.c +1
-0@@ -79,6 +79,7 @@ static unsigned long flint_pin_config[] __initdata = { };static struct pxa_gpio_platform_data mmp2_gpio_pdata = { + .nr_gpios =192 , .ed_mask = true, };arch/arm/mach-mmp/gplugd.c +1
-0@@ -129,6 +129,7 @@ static unsigned long gplugd_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-mmp/tavorevb.c +1
-0@@ -62,6 +62,7 @@ static unsigned long tavorevb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-mmp/teton_bga.c +1
-0@@ -51,6 +51,7 @@ static unsigned long teton_bga_pin_config[] __initdata = { };static struct pxa_gpio_platform_data pxa168_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-mmp/ttc_dkb.c +1
-0@@ -75,6 +75,7 @@ static unsigned long ttc_dkb_pin_config[] __initdata = { };static struct pxa_gpio_platform_data ttc_dkb_gpio_pdata = { + .nr_gpios =128 , .ed_mask = true, };arch/arm/mach-pxa/pxa25x.c +3
-0@@ -342,6 +342,9 @@ void __init pxa25x_map_io(void)static struct pxa_gpio_platform_data pxa25x_gpio_info__initdata = { #ifdef CONFIG_CPU_PXA26x .inverted = true, + .nr_gpios =90 , +#else + .nr_gpios =85 , #endif .gafr = true, .gpio_set_wake = gpio_set_wake,arch/arm/mach-pxa/pxa27x.c +1
-0@@ -431,6 +431,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)static struct pxa_gpio_platform_data pxa27x_gpio_info__initdata = { .gafr = true, + .nr_gpios =121 , .gpio_set_wake = gpio_set_wake, };arch/arm/mach-pxa/pxa3xx.c +15
-2@@ -15,6 +15,7 @@#include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/gpio-pxa.h> #include <linux/pm.h> #include <linux/platform_device.h> #include <linux/irq.h> @@ -435,6 +436,10 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)pxa_register_device (&pxa3xx_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa3xx_gpio_info__initdata = { + .nr_gpios =128 , +}; +static struct platform_device *devices[]__initdata = { &pxa_device_gpio, &pxa27x_device_udc,@@ -482,8 +487,16 @@ static int __init pxa3xx_init(void)register_syscore_ops (&pxa3xx_mfp_syscore_ops);register_syscore_ops (&pxa3xx_clock_syscore_ops); -if (!of_have_populated_dt ()) - ret =platform_add_devices (devices,ARRAY_SIZE (devices)); +if (!of_have_populated_dt ()) { +if (cpu_is_pxa93x ()) + pxa3xx_gpio_info.nr_gpios =192 ; + ret =platform_device_add_data (&pxa_device_gpio, + &pxa3xx_gpio_info, +sizeof (struct pxa_gpio_platform_data )); +if (!ret) + ret =platform_add_devices (devices, +ARRAY_SIZE (devices)); + } }return ret;drivers/gpio/gpio-pxa.c +8
-40@@ -380,36 +380,6 @@ static struct irq_chip pxa_muxed_gpio_chip = { .irq_set_wake = pxa_gpio_set_wake, }; -static int pxa_gpio_nums (void ) -{ -int count =0 ; - -#ifdef CONFIG_ARCH_PXA -if (cpu_is_pxa25x ()) { -#ifdef CONFIG_CPU_PXA26x - count =89 ; -#elif defined(CONFIG_PXA25x) - count =84 ; -#endif /* CONFIG_CPU_PXA26x */ - }else if (cpu_is_pxa27x ()) { - count =120 ; - }else if (cpu_is_pxa93x ()) { - count =191 ; - }else if (cpu_is_pxa3xx ()) { - count =127 ; - } -#endif /* CONFIG_ARCH_PXA */ - -#ifdef CONFIG_ARCH_MMP -if (cpu_is_pxa168 () ||cpu_is_pxa910 ()) { - count =127 ; - }else if (cpu_is_mmp2 ()) { - count =191 ; - } -#endif /* CONFIG_ARCH_MMP */ -return count; -} -static int pxa_irq_domain_map (struct irq_domain *d,unsigned int irq,irq_hw_number_t hw) {@@ -433,7 +403,7 @@ static struct of_device_id pxa_gpio_dt_ids[] = {static int pxa_gpio_probe_dt (struct platform_device *pdev) { -int ret, nr_banks, nr_gpios; +int ret, nr_banks;struct pxa_gpio_platform_data *pdata;struct device_node *prev, *next, *np = pdev->dev.of_node; const struct of_device_id *of_id =@@ -451,6 +421,11 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)/* It's only valid for PXA26x */ if (of_find_property (np,"marvell,gpio-inverted" ,NULL )) pdata->inverted = true; + ret =of_property_read_u32 (np,"marvell,nr-gpios" , &pdata->nr_gpios); +if (ret <0 ) { +dev_err (&pdev->dev,"nr-gpios isn't specified\n" ); +return -ENOTSUPP ; + }/* set the platform data */ pdev->dev.platform_data = pdata;@@ -468,8 +443,6 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev) prev = next; }of_node_put (prev); - nr_gpios = nr_banks <<5 ; - pxa_last_gpio = nr_gpios -1 ;return 0 ; err:@@ -540,14 +513,8 @@ static int pxa_gpio_probe(struct platform_device *pdev)int irq0 =0 , irq1 =0 , irq_mux, gpio_offset =0 ; ret =pxa_gpio_probe_dt (pdev); -if (ret <0 ) { - pxa_last_gpio =pxa_gpio_nums (); - }else { +if (!ret) use_of =1 ; - } - -if (!pxa_last_gpio) -return -EINVAL ; irq0 =platform_get_irq_byname (pdev,"gpio0" ); irq1 =platform_get_irq_byname (pdev,"gpio1" );@@ -581,6 +548,7 @@ static int pxa_gpio_probe(struct platform_device *pdev)/* Initialize GPIO chips */ info =dev_get_platdata (&pdev->dev); + pxa_last_gpio = info->nr_gpios -1 ;pxa_init_gpio_chip (pdev, pxa_last_gpio, info ? info->gpio_set_wake :NULL );include/linux/gpio-pxa.h +1
-0@@ -19,6 +19,7 @@ struct pxa_gpio_platform_data {bool ed_mask;/* true means that ed_mask reg is available */ bool inverted;/* only valid for PXA26x */ bool gafr;/* only valid for PXA25x/PXA26x/PXA27x */ +unsigned nr_gpios;int (*gpio_set_wake)(unsigned int gpio,unsigned int on); };
Signature · 2 lines
Regards, Igor.
PATCH v2 5/10 gpio: pxa: define nr gpios in platform data
In reply to Igor GrinbergQuoted 10 lines · Igor Grinberg
Hi Haojian,
Quoted 4 lines · Haojian Zhuang
Avoid to define gpio numbers in gpio driver. Define it in platform data instead.
Signed-off-by Haojian Zhuang <[email protected]>Same comments as for previous version...
Thank you for your checking. Now I fix this issue.
Best Regards
Haojian
PATCH v2 6/10 gpio: pxa: clean code for compatible name
In reply to Haojian ZhuangUse compatible variable name in gpio pxa driver.
--- drivers/gpio/gpio-pxa.c | 194 ++++++++++++++++++++++++----------------------- 1 file changed, 98 insertions(+), 96 deletions(-)
drivers/gpio/gpio-pxa.c +98 -96
@@ -95,9 +95,9 @@ static void __iomem *gpio_reg_base;#define for_each_gpio_chip (i, c) \ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) -static inline void __iomem *gpio_chip_base (struct gpio_chip *c) +static inline void __iomem *gpio_chip_base (struct gpio_chip *gc) { - return container_of(c, struct pxa_gpio_chip, chip)->regbase; + return container_of(gc, struct pxa_gpio_chip, chip)->regbase; }static inline struct pxa_gpio_chip *gpio_to_pxachip (unsigned gpio)
@@ -210,14 +210,14 @@ static int pxa_gpio_direction_output(struct gpio_chip *gc,return 0 ; } -static int pxa_gpio_get (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_get (struct gpio_chip *gc,unsigned offset) { -return readl_relaxed (gpio_chip_base (chip) +GPLR_OFFSET ) & (1 << offset); +return readl_relaxed (gpio_chip_base (gc) +GPLR_OFFSET ) & (1 << offset); } -static void pxa_gpio_set (struct gpio_chip *chip,unsigned offset,int value) +static void pxa_gpio_set (struct gpio_chip *gc,unsigned offset,int value) { -writel_relaxed (1 << offset,gpio_chip_base (chip) + +writel_relaxed (1 << offset,gpio_chip_base (gc) + (value ?GPSR_OFFSET :GPCR_OFFSET )); }
@@ -242,57 +242,58 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc,/* Update only those GRERx and GFERx edge detection register bits if those * bits are set in c->irq_mask */ -static inline void update_edge_detect (struct pxa_gpio_chip *c) +static inline void update_edge_detect (struct pxa_gpio_chip *chip) {uint32_t grer, gfer; - grer =readl_relaxed (c->regbase +GRER_OFFSET ) & ~c->irq_mask; - gfer =readl_relaxed (c->regbase +GFER_OFFSET ) & ~c->irq_mask; - grer |= c->irq_edge_rise & c->irq_mask; - gfer |= c->irq_edge_fall & c->irq_mask; -writel_relaxed (grer, c->regbase +GRER_OFFSET ); -writel_relaxed (gfer, c->regbase +GFER_OFFSET ); + grer =readl_relaxed (chip->regbase +GRER_OFFSET ) & ~chip->irq_mask; + gfer =readl_relaxed (chip->regbase +GFER_OFFSET ) & ~chip->irq_mask; + grer |= chip->irq_edge_rise & chip->irq_mask; + gfer |= chip->irq_edge_fall & chip->irq_mask; +writel_relaxed (grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (gfer, chip->regbase +GFER_OFFSET ); }static int pxa_gpio_irq_type (struct irq_data *d,unsigned int type) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio =pxa_irq_to_gpio (d);unsigned long gpdr, mask =GPIO_bit (gpio); - c =gpio_to_pxachip (gpio); + chip =gpio_to_pxachip (gpio);if (type ==IRQ_TYPE_PROBE ) {/* Don't mess with enabled GPIOs using preconfigured edges or * GPIOs set to alternate function or to output during probe */ -if ((c->irq_edge_rise | c->irq_edge_fall) &GPIO_bit (gpio)) +if ((chip->irq_edge_rise | chip->irq_edge_fall) + &GPIO_bit (gpio))return 0 ; -if (__gpio_is_occupied (c, gpio)) +if (__gpio_is_occupied (chip, gpio))return 0 ; type =IRQ_TYPE_EDGE_RISING |IRQ_TYPE_EDGE_FALLING ; } - gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); + gpdr =readl_relaxed (chip->regbase +GPDR_OFFSET ); -if (__gpio_is_inverted (c, gpio)) -writel_relaxed (gpdr | mask, c->regbase +GPDR_OFFSET ); +if (__gpio_is_inverted (chip, gpio)) +writel_relaxed (gpdr | mask, chip->regbase +GPDR_OFFSET );else -writel_relaxed (gpdr & ~mask, c->regbase +GPDR_OFFSET ); +writel_relaxed (gpdr & ~mask, chip->regbase +GPDR_OFFSET );if (type &IRQ_TYPE_EDGE_RISING ) - c->irq_edge_rise |= mask; + chip->irq_edge_rise |= mask;else - c->irq_edge_rise &= ~mask; + chip->irq_edge_rise &= ~mask;if (type &IRQ_TYPE_EDGE_FALLING ) - c->irq_edge_fall |= mask; + chip->irq_edge_fall |= mask;else - c->irq_edge_fall &= ~mask; + chip->irq_edge_fall &= ~mask; -update_edge_detect (c); +update_edge_detect (chip); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
@@ -302,21 +303,21 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)static void pxa_gpio_demux_handler (unsigned int irq,struct irq_desc *desc) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int loop, gpio, gpio_base, n;unsigned long gedr; -struct irq_chip *chip =irq_desc_get_chip (desc); +struct irq_chip *ic =irq_desc_get_chip (desc); -chained_irq_enter (chip, desc); +chained_irq_enter (ic, desc); do { loop = 0; - for_each_gpio_chip(gpio, c) { - gpio_base = c->chip.base; + for_each_gpio_chip(gpio, chip) { + gpio_base = chip->chip.base; - gedr = readl_relaxed(c->regbase + GEDR_OFFSET); - gedr = gedr & c->irq_mask; - writel_relaxed(gedr, c->regbase + GEDR_OFFSET); + gedr = readl_relaxed(chip->regbase + GEDR_OFFSET); + gedr = gedr & chip->irq_mask; + writel_relaxed(gedr, chip->regbase + GEDR_OFFSET); for_each_set_bit(n, &gedr, BITS_PER_LONG) { loop = 1;
@@ -326,38 +327,38 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) } }while (loop); -chained_irq_exit (chip, desc); +chained_irq_exit (ic, desc); }static void pxa_ack_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); -writel_relaxed (GPIO_bit (gpio), c->regbase +GEDR_OFFSET ); +writel_relaxed (GPIO_bit (gpio), chip->regbase +GEDR_OFFSET ); }static void pxa_mask_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio);uint32_t grer, gfer; - c->irq_mask &= ~GPIO_bit (gpio); + chip->irq_mask &= ~GPIO_bit (gpio); - grer =readl_relaxed (c->regbase +GRER_OFFSET ) & ~GPIO_bit (gpio); - gfer =readl_relaxed (c->regbase +GFER_OFFSET ) & ~GPIO_bit (gpio); -writel_relaxed (grer, c->regbase +GRER_OFFSET ); -writel_relaxed (gfer, c->regbase +GFER_OFFSET ); + grer =readl_relaxed (chip->regbase +GRER_OFFSET ) & ~GPIO_bit (gpio); + gfer =readl_relaxed (chip->regbase +GFER_OFFSET ) & ~GPIO_bit (gpio); +writel_relaxed (grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (gfer, chip->regbase +GFER_OFFSET ); }static int pxa_gpio_set_wake (struct irq_data *d,unsigned int on) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); -if (c->set_wake) -return c->set_wake (gpio, on); +if (chip->set_wake) +return chip->set_wake (gpio, on);else return 0 ; }
@@ -365,10 +366,10 @@ static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on)static void pxa_unmask_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); - c->irq_mask |=GPIO_bit (gpio); -update_edge_detect (c); + chip->irq_mask |=GPIO_bit (gpio); +update_edge_detect (chip); }static struct irq_chip pxa_muxed_gpio_chip = {
@@ -466,38 +467,37 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, }for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { -struct gpio_chip *c = &chips[i].chip; +struct gpio_chip *gc = &chips[i].chip;sprintf (chips[i].label,"gpio-%d" , i); chips[i].regbase = gpio_reg_base +BANK_OFF (i); chips[i].set_wake = set_wake; - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - c->to_irq = pxa_gpio_to_irq; -#ifdef CONFIG_OF_GPIO - c->of_node = pxa_gpio_of_node; - c->of_xlate = pxa_gpio_of_xlate; - c->of_gpio_n_cells =2 ; -#endif -/* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; + gc->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; - chips[i].irq_base =irq_alloc_descs (-1 ,0 , c->ngpio,0 ); + chips[i].irq_base =irq_alloc_descs (-1 ,0 , gc->ngpio,0 );if (chips[i].irq_base <0 )return -EINVAL ; -if (!irq_domain_add_legacy (pdev->dev.of_node, c->ngpio, +if (!irq_domain_add_legacy (pdev->dev.of_node, gc->ngpio, chips[i].irq_base,0 , &pxa_irq_domain_ops, &chips[i]))return -ENODEV ; -gpiochip_add (c); + gc->base = gpio; + gc->label = chips[i].label; + + gc->direction_input = pxa_gpio_direction_input; + gc->direction_output = pxa_gpio_direction_output; + gc->get = pxa_gpio_get; + gc->set = pxa_gpio_set; + gc->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + gc->of_node = pxa_gpio_of_node; + gc->of_xlate = pxa_gpio_of_xlate; + gc->of_gpio_n_cells =2 ; +#endif +gpiochip_add (gc); } pxa_gpio_chips = chips;return 0 ;
@@ -505,10 +505,10 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end,static int pxa_gpio_probe (struct platform_device *pdev) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;struct resource *res;struct clk *clk; -struct pxa_gpio_platform_data *info; +struct pxa_gpio_platform_data *pdata;int gpio, irq, ret, use_of =0 ;int irq0 =0 , irq1 =0 , irq_mux, gpio_offset =0 ;
@@ -547,22 +547,24 @@ static int pxa_gpio_probe(struct platform_device *pdev) }/* Initialize GPIO chips */ - info =dev_get_platdata (&pdev->dev); - pxa_last_gpio = info->nr_gpios -1 ; -pxa_init_gpio_chip (pdev, pxa_last_gpio, - info ? info->gpio_set_wake :NULL ); + pdata =dev_get_platdata (&pdev->dev); + pxa_last_gpio = pdata->nr_gpios -1 ; + ret =pxa_init_gpio_chip (pdev, pxa_last_gpio, + pdata ? pdata->gpio_set_wake :NULL ); +if (ret <0 ) +return ret;/* clear all GPIO edge detects */ -for_each_gpio_chip (gpio, c) { -writel_relaxed (0 , c->regbase +GFER_OFFSET ); -writel_relaxed (0 , c->regbase +GRER_OFFSET ); -writel_relaxed (~0 ,c->regbase +GEDR_OFFSET ); +for_each_gpio_chip (gpio, chip) { +writel_relaxed (0 , chip->regbase +GFER_OFFSET ); +writel_relaxed (0 , chip->regbase +GRER_OFFSET ); +writel_relaxed (~0 ,chip->regbase +GEDR_OFFSET );/* unmask GPIO edge detect for AP side */ -if (info->ed_mask) -writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); +if (pdata->ed_mask) +writel_relaxed (~0 , chip->regbase +ED_MASK_OFFSET );/* update for gpio inverted & gafr */ - c->inverted = info->inverted; - c->gafr = info->gafr; + chip->inverted = pdata->inverted; + chip->gafr = pdata->gafr; }if (!use_of) {
@@ -604,34 +606,34 @@ module_platform_driver(pxa_gpio_driver);#ifdef CONFIG_PM static int pxa_gpio_suspend (void ) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio; -for_each_gpio_chip (gpio, c) { - c->saved_gplr =readl_relaxed (c->regbase +GPLR_OFFSET ); - c->saved_gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); - c->saved_grer =readl_relaxed (c->regbase +GRER_OFFSET ); - c->saved_gfer =readl_relaxed (c->regbase +GFER_OFFSET ); +for_each_gpio_chip (gpio, chip) { + chip->saved_gplr =readl_relaxed (chip->regbase +GPLR_OFFSET ); + chip->saved_gpdr =readl_relaxed (chip->regbase +GPDR_OFFSET ); + chip->saved_grer =readl_relaxed (chip->regbase +GRER_OFFSET ); + chip->saved_gfer =readl_relaxed (chip->regbase +GFER_OFFSET );/* Clear GPIO transition detect bits */ -writel_relaxed (0xffffffff , c->regbase +GEDR_OFFSET ); +writel_relaxed (~0 , chip->regbase +GEDR_OFFSET ); }return 0 ; }static void pxa_gpio_resume (void ) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio; -for_each_gpio_chip (gpio, c) { +for_each_gpio_chip (gpio, chip) {/* restore level with set/clear */ -writel_relaxed ( c->saved_gplr, c->regbase +GPSR_OFFSET ); -writel_relaxed (~c->saved_gplr, c->regbase +GPCR_OFFSET ); +writel_relaxed ( chip->saved_gplr, chip->regbase +GPSR_OFFSET ); +writel_relaxed (~chip->saved_gplr, chip->regbase +GPCR_OFFSET ); -writel_relaxed (c->saved_grer, c->regbase +GRER_OFFSET ); -writel_relaxed (c->saved_gfer, c->regbase +GFER_OFFSET ); -writel_relaxed (c->saved_gpdr, c->regbase +GPDR_OFFSET ); +writel_relaxed (chip->saved_grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (chip->saved_gfer, chip->regbase +GFER_OFFSET ); +writel_relaxed (chip->saved_gpdr, chip->regbase +GPDR_OFFSET ); } }#else
Signature · 1 line
1.7.10.4
PATCH v2 6/10 gpio: pxa: clean code for compatible name
Quoted 3 lines · Haojian Zhuang
Use compatible variable name in gpio pxa driver.
Signed-off-by Haojian Zhuang <[email protected]>
Quoted 370 lines
--- drivers/gpio/gpio-pxa.c | 194 ++++++++++++++++++++++++----------------------- 1 file changed, 98 insertions(+), 96 deletions(-)drivers/gpio/gpio-pxa.c +98
-96@@ -95,9 +95,9 @@ static void __iomem *gpio_reg_base;#define for_each_gpio_chip (i, c) \ for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++) -static inline void __iomem *gpio_chip_base (struct gpio_chip *c) +static inline void __iomem *gpio_chip_base (struct gpio_chip *gc) { - return container_of(c, struct pxa_gpio_chip, chip)->regbase; + return container_of(gc, struct pxa_gpio_chip, chip)->regbase; }static inline struct pxa_gpio_chip *gpio_to_pxachip (unsigned gpio)@@ -210,14 +210,14 @@ static int pxa_gpio_direction_output(struct gpio_chip *gc,return 0 ; } -static int pxa_gpio_get (struct gpio_chip *chip,unsigned offset) +static int pxa_gpio_get (struct gpio_chip *gc,unsigned offset) { -return readl_relaxed (gpio_chip_base (chip) +GPLR_OFFSET ) & (1 << offset); +return readl_relaxed (gpio_chip_base (gc) +GPLR_OFFSET ) & (1 << offset); } -static void pxa_gpio_set (struct gpio_chip *chip,unsigned offset,int value) +static void pxa_gpio_set (struct gpio_chip *gc,unsigned offset,int value) { -writel_relaxed (1 << offset,gpio_chip_base (chip) + +writel_relaxed (1 << offset,gpio_chip_base (gc) + (value ?GPSR_OFFSET :GPCR_OFFSET )); }@@ -242,57 +242,58 @@ static int pxa_gpio_of_xlate(struct gpio_chip *gc,/* Update only those GRERx and GFERx edge detection register bits if those * bits are set in c->irq_mask */ -static inline void update_edge_detect (struct pxa_gpio_chip *c) +static inline void update_edge_detect (struct pxa_gpio_chip *chip) {uint32_t grer, gfer; - grer =readl_relaxed (c->regbase +GRER_OFFSET ) & ~c->irq_mask; - gfer =readl_relaxed (c->regbase +GFER_OFFSET ) & ~c->irq_mask; - grer |= c->irq_edge_rise & c->irq_mask; - gfer |= c->irq_edge_fall & c->irq_mask; -writel_relaxed (grer, c->regbase +GRER_OFFSET ); -writel_relaxed (gfer, c->regbase +GFER_OFFSET ); + grer =readl_relaxed (chip->regbase +GRER_OFFSET ) & ~chip->irq_mask; + gfer =readl_relaxed (chip->regbase +GFER_OFFSET ) & ~chip->irq_mask; + grer |= chip->irq_edge_rise & chip->irq_mask; + gfer |= chip->irq_edge_fall & chip->irq_mask; +writel_relaxed (grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (gfer, chip->regbase +GFER_OFFSET ); }static int pxa_gpio_irq_type (struct irq_data *d,unsigned int type) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio =pxa_irq_to_gpio (d);unsigned long gpdr, mask =GPIO_bit (gpio); - c =gpio_to_pxachip (gpio); + chip =gpio_to_pxachip (gpio);if (type ==IRQ_TYPE_PROBE ) {/* Don't mess with enabled GPIOs using preconfigured edges or * GPIOs set to alternate function or to output during probe */ -if ((c->irq_edge_rise | c->irq_edge_fall) &GPIO_bit (gpio)) +if ((chip->irq_edge_rise | chip->irq_edge_fall) + &GPIO_bit (gpio))return 0 ; -if (__gpio_is_occupied (c, gpio)) +if (__gpio_is_occupied (chip, gpio))return 0 ; type =IRQ_TYPE_EDGE_RISING |IRQ_TYPE_EDGE_FALLING ; } - gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); + gpdr =readl_relaxed (chip->regbase +GPDR_OFFSET ); -if (__gpio_is_inverted (c, gpio)) -writel_relaxed (gpdr | mask, c->regbase +GPDR_OFFSET ); +if (__gpio_is_inverted (chip, gpio)) +writel_relaxed (gpdr | mask, chip->regbase +GPDR_OFFSET );else -writel_relaxed (gpdr & ~mask, c->regbase +GPDR_OFFSET ); +writel_relaxed (gpdr & ~mask, chip->regbase +GPDR_OFFSET );if (type &IRQ_TYPE_EDGE_RISING ) - c->irq_edge_rise |= mask; + chip->irq_edge_rise |= mask;else - c->irq_edge_rise &= ~mask; + chip->irq_edge_rise &= ~mask;if (type &IRQ_TYPE_EDGE_FALLING ) - c->irq_edge_fall |= mask; + chip->irq_edge_fall |= mask;else - c->irq_edge_fall &= ~mask; + chip->irq_edge_fall &= ~mask; -update_edge_detect (c); +update_edge_detect (chip); pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, d->irq, gpio, ((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),@@ -302,21 +303,21 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)static void pxa_gpio_demux_handler (unsigned int irq,struct irq_desc *desc) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int loop, gpio, gpio_base, n;unsigned long gedr; -struct irq_chip *chip =irq_desc_get_chip (desc); +struct irq_chip *ic =irq_desc_get_chip (desc); -chained_irq_enter (chip, desc); +chained_irq_enter (ic, desc); do { loop = 0; - for_each_gpio_chip(gpio, c) { - gpio_base = c->chip.base; + for_each_gpio_chip(gpio, chip) { + gpio_base = chip->chip.base; - gedr = readl_relaxed(c->regbase + GEDR_OFFSET); - gedr = gedr & c->irq_mask; - writel_relaxed(gedr, c->regbase + GEDR_OFFSET); + gedr = readl_relaxed(chip->regbase + GEDR_OFFSET); + gedr = gedr & chip->irq_mask; + writel_relaxed(gedr, chip->regbase + GEDR_OFFSET); for_each_set_bit(n, &gedr, BITS_PER_LONG) { loop = 1;@@ -326,38 +327,38 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) } }while (loop); -chained_irq_exit (chip, desc); +chained_irq_exit (ic, desc); }static void pxa_ack_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); -writel_relaxed (GPIO_bit (gpio), c->regbase +GEDR_OFFSET ); +writel_relaxed (GPIO_bit (gpio), chip->regbase +GEDR_OFFSET ); }static void pxa_mask_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio);uint32_t grer, gfer; - c->irq_mask &= ~GPIO_bit (gpio); + chip->irq_mask &= ~GPIO_bit (gpio); - grer =readl_relaxed (c->regbase +GRER_OFFSET ) & ~GPIO_bit (gpio); - gfer =readl_relaxed (c->regbase +GFER_OFFSET ) & ~GPIO_bit (gpio); -writel_relaxed (grer, c->regbase +GRER_OFFSET ); -writel_relaxed (gfer, c->regbase +GFER_OFFSET ); + grer =readl_relaxed (chip->regbase +GRER_OFFSET ) & ~GPIO_bit (gpio); + gfer =readl_relaxed (chip->regbase +GFER_OFFSET ) & ~GPIO_bit (gpio); +writel_relaxed (grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (gfer, chip->regbase +GFER_OFFSET ); }static int pxa_gpio_set_wake (struct irq_data *d,unsigned int on) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); -if (c->set_wake) -return c->set_wake (gpio, on); +if (chip->set_wake) +return chip->set_wake (gpio, on);else return 0 ; }@@ -365,10 +366,10 @@ static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on)static void pxa_unmask_muxed_gpio (struct irq_data *d) {int gpio =pxa_irq_to_gpio (d); -struct pxa_gpio_chip *c =gpio_to_pxachip (gpio); +struct pxa_gpio_chip *chip =gpio_to_pxachip (gpio); - c->irq_mask |=GPIO_bit (gpio); -update_edge_detect (c); + chip->irq_mask |=GPIO_bit (gpio); +update_edge_detect (chip); }static struct irq_chip pxa_muxed_gpio_chip = {@@ -466,38 +467,37 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, }for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) { -struct gpio_chip *c = &chips[i].chip; +struct gpio_chip *gc = &chips[i].chip;sprintf (chips[i].label,"gpio-%d" , i); chips[i].regbase = gpio_reg_base +BANK_OFF (i); chips[i].set_wake = set_wake; - c->base = gpio; - c->label = chips[i].label; - - c->direction_input = pxa_gpio_direction_input; - c->direction_output = pxa_gpio_direction_output; - c->get = pxa_gpio_get; - c->set = pxa_gpio_set; - c->to_irq = pxa_gpio_to_irq; -#ifdef CONFIG_OF_GPIO - c->of_node = pxa_gpio_of_node; - c->of_xlate = pxa_gpio_of_xlate; - c->of_gpio_n_cells =2 ; -#endif -/* number of GPIOs on last bank may be less than 32 */ - c->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; + gc->ngpio = (gpio +31 > gpio_end) ? (gpio_end - gpio +1 ) :32 ; - chips[i].irq_base =irq_alloc_descs (-1 ,0 , c->ngpio,0 ); + chips[i].irq_base =irq_alloc_descs (-1 ,0 , gc->ngpio,0 );if (chips[i].irq_base <0 )return -EINVAL ; -if (!irq_domain_add_legacy (pdev->dev.of_node, c->ngpio, +if (!irq_domain_add_legacy (pdev->dev.of_node, gc->ngpio, chips[i].irq_base,0 , &pxa_irq_domain_ops, &chips[i]))return -ENODEV ; -gpiochip_add (c); + gc->base = gpio; + gc->label = chips[i].label; + + gc->direction_input = pxa_gpio_direction_input; + gc->direction_output = pxa_gpio_direction_output; + gc->get = pxa_gpio_get; + gc->set = pxa_gpio_set; + gc->to_irq = pxa_gpio_to_irq; +#ifdef CONFIG_OF_GPIO + gc->of_node = pxa_gpio_of_node; + gc->of_xlate = pxa_gpio_of_xlate; + gc->of_gpio_n_cells =2 ; +#endif +gpiochip_add (gc); } pxa_gpio_chips = chips;return 0 ;@@ -505,10 +505,10 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end,static int pxa_gpio_probe (struct platform_device *pdev) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;struct resource *res;struct clk *clk; -struct pxa_gpio_platform_data *info; +struct pxa_gpio_platform_data *pdata;int gpio, irq, ret, use_of =0 ;int irq0 =0 , irq1 =0 , irq_mux, gpio_offset =0 ;@@ -547,22 +547,24 @@ static int pxa_gpio_probe(struct platform_device *pdev) }/* Initialize GPIO chips */ - info =dev_get_platdata (&pdev->dev); - pxa_last_gpio = info->nr_gpios -1 ; -pxa_init_gpio_chip (pdev, pxa_last_gpio, - info ? info->gpio_set_wake :NULL ); + pdata =dev_get_platdata (&pdev->dev); + pxa_last_gpio = pdata->nr_gpios -1 ; + ret =pxa_init_gpio_chip (pdev, pxa_last_gpio, + pdata ? pdata->gpio_set_wake :NULL ); +if (ret <0 ) +return ret;/* clear all GPIO edge detects */ -for_each_gpio_chip (gpio, c) { -writel_relaxed (0 , c->regbase +GFER_OFFSET ); -writel_relaxed (0 , c->regbase +GRER_OFFSET ); -writel_relaxed (~0 ,c->regbase +GEDR_OFFSET ); +for_each_gpio_chip (gpio, chip) { +writel_relaxed (0 , chip->regbase +GFER_OFFSET ); +writel_relaxed (0 , chip->regbase +GRER_OFFSET ); +writel_relaxed (~0 ,chip->regbase +GEDR_OFFSET );/* unmask GPIO edge detect for AP side */ -if (info->ed_mask) -writel_relaxed (~0 , c->regbase +ED_MASK_OFFSET ); +if (pdata->ed_mask) +writel_relaxed (~0 , chip->regbase +ED_MASK_OFFSET );/* update for gpio inverted & gafr */ - c->inverted = info->inverted; - c->gafr = info->gafr; + chip->inverted = pdata->inverted; + chip->gafr = pdata->gafr; }if (!use_of) {@@ -604,34 +606,34 @@ module_platform_driver(pxa_gpio_driver);#ifdef CONFIG_PM static int pxa_gpio_suspend (void ) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio; -for_each_gpio_chip (gpio, c) { - c->saved_gplr =readl_relaxed (c->regbase +GPLR_OFFSET ); - c->saved_gpdr =readl_relaxed (c->regbase +GPDR_OFFSET ); - c->saved_grer =readl_relaxed (c->regbase +GRER_OFFSET ); - c->saved_gfer =readl_relaxed (c->regbase +GFER_OFFSET ); +for_each_gpio_chip (gpio, chip) { + chip->saved_gplr =readl_relaxed (chip->regbase +GPLR_OFFSET ); + chip->saved_gpdr =readl_relaxed (chip->regbase +GPDR_OFFSET ); + chip->saved_grer =readl_relaxed (chip->regbase +GRER_OFFSET ); + chip->saved_gfer =readl_relaxed (chip->regbase +GFER_OFFSET );/* Clear GPIO transition detect bits */ -writel_relaxed (0xffffffff , c->regbase +GEDR_OFFSET ); +writel_relaxed (~0 , chip->regbase +GEDR_OFFSET ); }return 0 ; }static void pxa_gpio_resume (void ) { -struct pxa_gpio_chip *c; +struct pxa_gpio_chip *chip;int gpio; -for_each_gpio_chip (gpio, c) { +for_each_gpio_chip (gpio, chip) {/* restore level with set/clear */ -writel_relaxed ( c->saved_gplr, c->regbase +GPSR_OFFSET ); -writel_relaxed (~c->saved_gplr, c->regbase +GPCR_OFFSET ); +writel_relaxed ( chip->saved_gplr, chip->regbase +GPSR_OFFSET ); +writel_relaxed (~chip->saved_gplr, chip->regbase +GPCR_OFFSET ); -writel_relaxed (c->saved_grer, c->regbase +GRER_OFFSET ); -writel_relaxed (c->saved_gfer, c->regbase +GFER_OFFSET ); -writel_relaxed (c->saved_gpdr, c->regbase +GPDR_OFFSET ); +writel_relaxed (chip->saved_grer, chip->regbase +GRER_OFFSET ); +writel_relaxed (chip->saved_gfer, chip->regbase +GFER_OFFSET ); +writel_relaxed (chip->saved_gpdr, chip->regbase +GPDR_OFFSET ); } }#else
Signature · 2 lines
Regards, Igor.
PATCH v2 7/10 gpio: pxa: remove arch related macro
In reply to Haojian ZhuangRemove macro CONFIG_ARCH_PXA.
--- drivers/gpio/gpio-pxa.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/gpio/gpio-pxa.c +15 -15
@@ -568,21 +568,21 @@ static int pxa_gpio_probe(struct platform_device *pdev) }if (!use_of) { -#ifdef CONFIG_ARCH_PXA - irq =gpio_to_irq (0 ); -irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, - handle_edge_irq); -set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); -irq_set_chained_handler (IRQ_GPIO0 , pxa_gpio_demux_handler); - - irq =gpio_to_irq (1 ); -irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, - handle_edge_irq); -set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); -irq_set_chained_handler (IRQ_GPIO1 , pxa_gpio_demux_handler); -#endif - -for (irq =gpio_to_irq (gpio_offset); +if (irq0 >0 ) { + irq =gpio_to_irq (0 ); +irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, + handle_edge_irq); +set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); +irq_set_chained_handler (irq0, pxa_gpio_demux_handler); + } +if (irq1 >0 ) { + irq =gpio_to_irq (1 ); +irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, + handle_edge_irq); +set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); +irq_set_chained_handler (irq1, pxa_gpio_demux_handler); + } +for (irq =gpio_to_irq (gpio_offset); irq <=gpio_to_irq (pxa_last_gpio); irq++) {irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, handle_edge_irq);
Signature · 1 line
1.7.10.4
PATCH v2 7/10 gpio: pxa: remove arch related macro
Quoted 3 lines · Haojian Zhuang
Remove macro
CONFIG_ARCH_PXA.Signed-off-by Haojian Zhuang <[email protected]>
Quoted 46 lines
--- drivers/gpio/gpio-pxa.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)drivers/gpio/gpio-pxa.c +15
-15@@ -568,21 +568,21 @@ static int pxa_gpio_probe(struct platform_device *pdev) }if (!use_of) { -#ifdef CONFIG_ARCH_PXA - irq =gpio_to_irq (0 ); -irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, - handle_edge_irq); -set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); -irq_set_chained_handler (IRQ_GPIO0 , pxa_gpio_demux_handler); - - irq =gpio_to_irq (1 ); -irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, - handle_edge_irq); -set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); -irq_set_chained_handler (IRQ_GPIO1 , pxa_gpio_demux_handler); -#endif - -for (irq =gpio_to_irq (gpio_offset); +if (irq0 >0 ) { + irq =gpio_to_irq (0 ); +irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, + handle_edge_irq); +set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); +irq_set_chained_handler (irq0, pxa_gpio_demux_handler); + } +if (irq1 >0 ) { + irq =gpio_to_irq (1 ); +irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, + handle_edge_irq); +set_irq_flags (irq,IRQF_VALID |IRQF_PROBE ); +irq_set_chained_handler (irq1, pxa_gpio_demux_handler); + } +for (irq =gpio_to_irq (gpio_offset); irq <=gpio_to_irq (pxa_last_gpio); irq++) {irq_set_chip_and_handler (irq, &pxa_muxed_gpio_chip, handle_edge_irq);
Signature · 2 lines
Regards, Igor.
PATCH v2 8/10 gpio: pxa: move gpio properties into child node
In reply to Haojian ZhuangMove gpio properties into child node. So pinctrl driver could binds to each gpio chip with gpio range.
--- drivers/gpio/gpio-pxa.c | 45 +++++++++++++++++---------------------------- 1 file changed, 17 insertions(+), 28 deletions(-)
drivers/gpio/gpio-pxa.c +17 -28
@@ -63,10 +63,6 @@int pxa_last_gpio; -#ifdef CONFIG_OF -static struct device_node *pxa_gpio_of_node; -#endif -struct pxa_gpio_chip {struct gpio_chip chip;void __iomem *regbase;
@@ -404,9 +400,9 @@ static struct of_device_id pxa_gpio_dt_ids[] = {static int pxa_gpio_probe_dt (struct platform_device *pdev) { -int ret, nr_banks; +int ret;struct pxa_gpio_platform_data *pdata; -struct device_node *prev, *next, *np = pdev->dev.of_node; +struct device_node *np = pdev->dev.of_node;const struct of_device_id *of_id =of_match_device (pxa_gpio_dt_ids, &pdev->dev);
@@ -430,25 +426,7 @@ static int pxa_gpio_probe_dt(struct platform_device *pdev)/* set the platform data */ pdev->dev.platform_data = pdata; - next =of_get_next_child (np,NULL ); - prev = next; -if (!next) { -dev_err (&pdev->dev,"Failed to find child gpio node\n" ); - ret = -EINVAL ; - goto err; - } -for (nr_banks =1 ; ; nr_banks++) { - next =of_get_next_child (np, prev); -if (!next) -break ; - prev = next; - } -of_node_put (prev); - return 0; -err: -iounmap (gpio_reg_base); - return ret; }#else #define pxa_gpio_probe_dt (pdev) (-1)
@@ -459,6 +437,7 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, {int i, gpio, nbanks =gpio_to_bank (gpio_end) +1 ;struct pxa_gpio_chip *chips; +struct device_node *next =NULL , *np =NULL ; chips =devm_kzalloc (&pdev->dev, nbanks *sizeof (*chips),GFP_KERNEL );if (chips ==NULL ) {
@@ -466,6 +445,11 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end,return -ENOMEM ; } + np = pdev->dev.of_node; +#ifdef CONFIG_OF +if (np) + next =of_get_next_child (np,NULL ); +#endif for (i =0 , gpio =0 ; i < nbanks; i++, gpio +=32 ) {struct gpio_chip *gc = &chips[i].chip;
@@ -492,13 +476,18 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, gc->get = pxa_gpio_get; gc->set = pxa_gpio_set; gc->to_irq = pxa_gpio_to_irq; -#ifdef CONFIG_OF_GPIO - gc->of_node = pxa_gpio_of_node; - gc->of_xlate = pxa_gpio_of_xlate; - gc->of_gpio_n_cells =2 ; +#ifdef CONFIG_OF +if (np) { + gc->of_node = next; + next =of_get_next_child (np, next); + + gc->of_xlate = pxa_gpio_of_xlate; + gc->of_gpio_n_cells =2 ; + }#endif gpiochip_add (gc); } +of_node_put (next); pxa_gpio_chips = chips;return 0 ; }
Signature · 1 line
1.7.10.4
PATCH v2 9/10 gpio: pxa: bind to pinctrl by request
In reply to Haojian ZhuangWhile gpio pins is requested, request the pin of pinctrl driver first.
--- drivers/gpio/gpio-pxa.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
drivers/gpio/gpio-pxa.c +19 -0
@@ -23,6 +23,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> #include <linux/slab.h>
@@ -159,6 +160,23 @@ int pxa_irq_to_gpio(struct irq_data *d)return gpio; } +static int pxa_gpio_request (struct gpio_chip *gc,unsigned offset) +{ +/* +* Map back to global GPIO space and request muxing, the direction +* parameter does not matter for this controller. +*/ +int gpio = gc->base + offset; + +/* +* Platforms in ARCH_PXA doesn't move to device tree yet, +* and PINCTRL_SINGLE is depend on device tree. +*/ +if (IS_ENABLED (CONFIG_PINCTRL_SINGLE )) +return pinctrl_request_gpio (gpio); +return 0 ; +} +static int pxa_gpio_direction_input (struct gpio_chip *gc,unsigned offset) {struct pxa_gpio_chip *chip =NULL ;
@@ -471,6 +489,7 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, gc->base = gpio; gc->label = chips[i].label; + gc->request = pxa_gpio_request; gc->direction_input = pxa_gpio_direction_input; gc->direction_output = pxa_gpio_direction_output; gc->get = pxa_gpio_get;
Signature · 1 line
1.7.10.4
PATCH v2 9/10 gpio: pxa: bind to pinctrl by request
Quoted 25 lines · Haojian Zhuang
While gpio pins is requested, request the pin of pinctrl driver first.
Signed-off-by Haojian Zhuang <[email protected]>--- drivers/gpio/gpio-pxa.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)drivers/gpio/gpio-pxa.c +3
-0@@ -23,6 +23,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> #include <linux/slab.h> @@ -159,6 +160,23 @@ int pxa_irq_to_gpio(struct irq_data *d)return gpio; } +static int pxa_gpio_request (struct gpio_chip *gc,unsigned offset) +{
drivers/gpio/gpio-pxa.c int pxa_irq_to_gpio(struct irq_data *d) · line 174
Quoted 10 lines
drivers/gpio/gpio-pxa.c +10
-0+/* +* Map back to global GPIO space and request muxing, the direction +* parameter does not matter for this controller. +*/ +int gpio = gc->base + offset; + +/* +* Platforms in ARCH_PXA doesn't move to device tree yet, +* and PINCTRL_SINGLE is depend on device tree. +*/
If this is interesting, git am says:
patch:32: trailing whitespace.
*/
warning: 1 line adds whitespace errors.
Quoted 17 lines
drivers/gpio/gpio-pxa.c +6
-0+if (IS_ENABLED (CONFIG_PINCTRL_SINGLE )) +return pinctrl_request_gpio (gpio); +return 0 ; +} +static int pxa_gpio_direction_input (struct gpio_chip *gc,unsigned offset) {struct pxa_gpio_chip *chip =NULL ;@@ -471,6 +489,7 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, gc->base = gpio; gc->label = chips[i].label; + gc->request = pxa_gpio_request; gc->direction_input = pxa_gpio_direction_input; gc->direction_output = pxa_gpio_direction_output; gc->get = pxa_gpio_get;
Signature · 2 lines
Regards, Igor.
PATCH v2 9/10 gpio: pxa: bind to pinctrl by request
In reply to Haojian ZhuangQuoted 3 lines · Haojian Zhuang
While gpio pins is requested, request the pin of pinctrl driver first.
Signed-off-by Haojian Zhuang <[email protected]>
Quoted 49 lines
--- drivers/gpio/gpio-pxa.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)drivers/gpio/gpio-pxa.c +19
-0@@ -23,6 +23,7 @@#include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/syscore_ops.h> #include <linux/slab.h> @@ -159,6 +160,23 @@ int pxa_irq_to_gpio(struct irq_data *d)return gpio; } +static int pxa_gpio_request (struct gpio_chip *gc,unsigned offset) +{ +/* +* Map back to global GPIO space and request muxing, the direction +* parameter does not matter for this controller. +*/ +int gpio = gc->base + offset; + +/* +* Platforms in ARCH_PXA doesn't move to device tree yet, +* and PINCTRL_SINGLE is depend on device tree. +*/ +if (IS_ENABLED (CONFIG_PINCTRL_SINGLE )) +return pinctrl_request_gpio (gpio); +return 0 ; +} +static int pxa_gpio_direction_input (struct gpio_chip *gc,unsigned offset) {struct pxa_gpio_chip *chip =NULL ;@@ -471,6 +489,7 @@ static int pxa_init_gpio_chip(struct platform_device *pdev, int gpio_end, gc->base = gpio; gc->label = chips[i].label; + gc->request = pxa_gpio_request; gc->direction_input = pxa_gpio_direction_input; gc->direction_output = pxa_gpio_direction_output; gc->get = pxa_gpio_get;
Signature · 2 lines
Regards, Igor.
PATCH v2 10/10 ARM: dts: support pinmux in pxa910
In reply to Haojian ZhuangAdd gpio range, pinmux settings in pxa910 dkb DTS file.
--- arch/arm/boot/dts/pxa910-dkb.dts | 264 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/pxa910.dtsi | 29 ++++- 2 files changed, 291 insertions(+), 2 deletions(-)
arch/arm/boot/dts/pxa910-dkb.dts +264 -0
@@ -170,6 +170,270 @@ rtc: rtc at d4010000 { status = "okay"; }; + gpio-keys { + compatible = "gpio-keys"; + + /* in6, out3, out4 */ + right { + label = "right"; + gpios = <&gcb0 12 0>; + linux,code = <106>; /* KEY_RIGHT */ + }; + num5 { + label = "5"; + gpios = <&gcb0 4 0>; + linux,code = <6>; /* KEY_5 */ + }; + }; + gpio at d4019000 { + status = "okay"; + + /* + * In theorical, some gpios could be routed to + * multiple pins. So define the gpio-ranges in + * board file, not silicon file. + */ + gcb0: gpio at d4019000 { + /* <gpio_offset, pin_offset, nr_pins> */ + gpio-ranges = <&pmx 0 55 32>; + }; + gcb1: gpio at d4019004 { + /* <gpio_offset, pin_offset, nr_pins> */ + gpio-ranges = <&pmx 0 87 23 &pmx 23 188 9>; + }; + gcb2: gpio at d4019008 { + /* <gpio_offset, pin_offset, nr_pins> */ + gpio-ranges = <&pmx 0 197 3 &pmx 3 110 29>; + }; + gcb3: gpio at d4019100 { + /* <gpio_offset, pin_offset, nr_pins> */ + gpio-ranges = < &pmx 0 139 14 &pmx 14 166 7 + &pmx 21 45 4 &pmx 25 203 1 + &pmx 26 50 4 &pmx 30 27 2>; + }; + }; + pmx: pinmux at d401e000 { + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = < + /* + * GPIO number is hardcoded for range@here. + * In gpio chip, GPIO number is not hardcoded for range. + * Since one gpio pin may be routed to multiple pins, + * define these gpio range in pxa910-dkb.dts not pxa910.dtsi. + */ + &range 55 55 0 /* GPIO0 ~ GPIO54 */ + &range 188 5 1 /* GPIO55 ~ GPIO59 */ + &range 193 7 0 /* GPIO60 ~ GPIO66 */ + &range 110 43 0 /* GPIO67 ~ GPIO109 */ + &range 166 7 0 /* GPIO110 ~ GPIO116 */ + &range 45 4 0 /* GPIO117 ~ GPIO120 */ + &range 50 2 1 /* GPIO122 ~ GPIO123 */ + &range 203 1 0 /* GPIO121 */ + &range 52 1 0 /* GPIO124 */ + &range 53 1 1 /* GPIO125 */ + &range 27 2 0 /* GPIO126 ~ GPIO127 */ + >; + + pinctrl-names = "default"; + pinctrl-0 = <&keypad_pmx_func>; + + uart1_pmx_func: pinmux_uart1_pins at 0 { + pinctrl-single,pins = < + 0x198 0x6 /* GPIO47_UART1_RXD */ + 0x19c 0x6 /* GPIO48_UART1_TXD */ + >; + /* slew rate set value, mask */ + pinctrl-single,slew-rate = <0x1000 0x1800>; + /* bias set value, match, mask */ + pinctrl-single,bias-disable = <0x8000 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x4000 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + /* input schmitt set value, mask */ + pinctrl-single,input-schmitt = <0x40 0x70>; + /* input schmitt disable value, match, mask */ + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + uart2_pmx_func: pinmux_uart2_pins at 0 { + pinctrl-single,pins = < + 0x150 0x4 /* GPIO29_UART2_CTS */ + 0x154 0x4 /* GPIO30_UART2_RTS */ + 0x158 0x4 /* GPIO31_UART2_TXD */ + 0x15c 0x4 /* GPIO32_UART2_RXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + uart3_pmx_func: pinmux_uart3_pins at 0 { + pinctrl-single,pins = < + 0x188 0x7 /* GPIO43_UART3_RXD */ + 0x18c 0x7 /* GPIO44_UART3_TXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + twsi1_pmx_func: pinmux_twsi1_pins at 0 { + pinctrl-single,pins = < + 0x1b0 0x2 /* GPIO53_TWSI_SCL */ + 0x1b4 0x2 /* GPIO54_TWSI_SDA */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + nand_pmx_func: pinmux_nand_pins at 0 { + pinctrl-single,pins = < + 0x040 0x0 /* ND_IO0 */ + 0x03c 0x0 /* ND_IO1 */ + 0x038 0x0 /* ND_IO2 */ + 0x034 0x0 /* ND_IO3 */ + 0x030 0x0 /* ND_IO4 */ + 0x02c 0x0 /* ND_IO5 */ + 0x028 0x0 /* ND_IO6 */ + 0x024 0x0 /* ND_IO7 */ + 0x020 0x0 /* ND_IO8 */ + 0x01c 0x0 /* ND_IO9 */ + 0x018 0x0 /* ND_IO10 */ + 0x014 0x0 /* ND_IO11 */ + 0x010 0x0 /* ND_IO12 */ + 0x00c 0x0 /* ND_IO13 */ + 0x008 0x0 /* ND_IO14 */ + 0x004 0x0 /* ND_IO15 */ + 0x044 0x0 /* ND_nCS0 */ + 0x060 0x1 /* ND_ALE */ + 0x05c 0x0 /* ND_CLE */ + 0x054 0x1 /* ND_nWE */ + 0x058 0x1 /* ND_nRE */ + 0x068 0x0 /* ND_RDY0 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc1_pmx_func1: pinmux_mmc1_pins at 0 { + pinctrl-single,pins = < + 0x0a0 0x0 /* MMC1_DATA0 */ + 0x09c 0x0 /* MMC1_DATA1 */ + 0x098 0x0 /* MMC1_DATA2 */ + 0x094 0x0 /* MMC1_DATA3 */ + 0x090 0x0 /* MMC1_DATA4 */ + 0x08c 0x0 /* MMC1_DATA5 */ + 0x088 0x0 /* MMC1_DATA6 */ + 0x084 0x0 /* MMC1_DATA7 */ + 0x0a4 0x0 /* MMC1_CMD */ + 0x0a8 0x0 /* MMC1_CLK */ + >; + pinctrl-single,slew-rate = <0x1800 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc1_pmx_func2: pinmux_mmc1_pins at 1 { + pinctrl-single,pins = < + 0x0ac 0x0 /* MMC1_CD */ + 0x0b0 0x0 /* MMC1_WP */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc2_pmx_func: pinmux_mmc2_pins at 0 { + pinctrl-single,pins = < + 0x180 0x1 /* MMC2_CMD */ + 0x184 0x1 /* MMC2_CLK */ + 0x17c 0x1 /* MMC2_DATA0 */ + 0x178 0x1 /* MMC2_DATA1 */ + 0x174 0x1 /* MMC2_DATA2 */ + 0x170 0x1 /* MMC2_DATA3 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + ssp1_pmx_func: pinmux_ssp1_pins at 0 { + pinctrl-single,pins = < + 0x130 0x1 /* GPIO21_SSP1_SCLK */ + 0x134 0x1 /* GPIO22_SSP1_FRM */ + 0x138 0x1 /* GPIO23_SSP1_TXD */ + 0x13c 0x1 /* GPIO24_SSP1_RXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + keypad_pmx_func: pinmux_keypad_pins at 0 { + pinctrl-single,pins = < + 0x0dc 0x1 /* GPIO0_MKIN0 */ + 0x0e0 0x1 /* GPIO1_MKOUT0 */ + 0x0e4 0x1 /* GPIO2_MKIN1 */ + 0x0e8 0x1 /* GPIO3_MKOUT1 */ + 0x0ec 0x1 /* GPIO4_MKIN2 */ + 0x0f0 0x1 /* GPIO5_MKOUT2 */ + 0x0f4 0x1 /* GPIO6_MKIN3 */ + 0x0f8 0x1 /* GPIO7_MKOUT3 */ + 0x0fc 0x1 /* GPIO8_MKIN4 */ + 0x100 0x1 /* GPIO9_MKOUT4 */ + 0x10c 0x1 /* GPIO12_MKIN6 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x8000 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x2000 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + nfc_pmx_func: pinmux_nfc_pins at 0 { + pinctrl-single,pins = < + 0x120 0x0 /* GPIO17 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + wlan_pmx_func: pinmux_wlan_pins at 0 { + pinctrl-single,pins = < + 0x114 0x0 /* GPIO14 */ + 0x12c 0x0 /* GPIO20 */ + 0x160 0x0 /* GPIO33 */ + 0x164 0x0 /* GPIO34 */ + 0x168 0x0 /* GPIO35 */ + 0x16c 0x0 /* GPIO36 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + }; }; }; };
arch/arm/boot/dts/pxa910.dtsi +27 -2
@@ -93,28 +93,37 @@ #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + marvell,gpio-ed-mask = <1>; + marvell,nr-gpios = <128>; interrupts = <49>; interrupt-names = "gpio_mux"; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; ranges; gcb0: gpio at d4019000 { reg = <0xd4019000 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb1: gpio at d4019004 { reg = <0xd4019004 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb2: gpio at d4019008 { reg = <0xd4019008 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb3: gpio at d4019100 { reg = <0xd4019100 0x4>; + gpio-controller; + #gpio-cells = <2>; }; };
@@ -144,6 +153,22 @@ interrupt-names = "rtc 1Hz", "rtc alarm"; status = "disabled"; }; + + pmx: pinmux at d401e000 { + compatible = "pinconf-single"; + reg = <0xd401e000 0x330>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; }; }; };
Signature · 1 line
1.7.10.4
PATCH v2 10/10 ARM: dts: support pinmux in pxa910
Quoted 13 lines · Haojian Zhuang
Add gpio range, pinmux settings in pxa910 dkb DTS file.
Signed-off-by Haojian Zhuang <[email protected]>--- arch/arm/boot/dts/pxa910-dkb.dts | 264 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/pxa910.dtsi | 29 ++++- 2 files changed, 291 insertions(+), 2 deletions(-)arch/arm/boot/dts/pxa910-dkb.dts +0
-0@@ -170,6 +170,270 @@
[...]
arch/arm/boot/dts/pxa910-dkb.dts line 225
Quoted 11 lines
arch/arm/boot/dts/pxa910-dkb.dts +11
-0+ pmx: pinmux at d401e000 { + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = < + /* + * GPIO number is hardcoded for range at here. + * In gpio chip, GPIO number is not hardcoded for range. + * Since one gpio pin may be routed to multiple pins, + * define these gpio range in pxa910-dkb.dts not pxa910.dtsi. + */ + &range 55 55 0 /* GPIO0 ~ GPIO54 */ + &range 188 5 1 /* GPIO55 ~ GPIO59 */
If this is interesting git am says:
patch:66: trailing whitespace.
&range 188 5 1 /* GPIO55 ~ GPIO59 */
warning: 1 line adds whitespace errors.
Quoted 282 lines
arch/arm/boot/dts/pxa910-dkb.dts +211
-0+ &range 193 7 0 /* GPIO60 ~ GPIO66 */ + &range 110 43 0 /* GPIO67 ~ GPIO109 */ + &range 166 7 0 /* GPIO110 ~ GPIO116 */ + &range 45 4 0 /* GPIO117 ~ GPIO120 */ + &range 50 2 1 /* GPIO122 ~ GPIO123 */ + &range 203 1 0 /* GPIO121 */ + &range 52 1 0 /* GPIO124 */ + &range 53 1 1 /* GPIO125 */ + &range 27 2 0 /* GPIO126 ~ GPIO127 */ + >; + + pinctrl-names = "default"; + pinctrl-0 = <&keypad_pmx_func>; + + uart1_pmx_func: pinmux_uart1_pins at 0 { + pinctrl-single,pins = < + 0x198 0x6 /* GPIO47_UART1_RXD */ + 0x19c 0x6 /* GPIO48_UART1_TXD */ + >; + /* slew rate set value, mask */ + pinctrl-single,slew-rate = <0x1000 0x1800>; + /* bias set value, match, mask */ + pinctrl-single,bias-disable = <0x8000 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x4000 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + /* input schmitt set value, mask */ + pinctrl-single,input-schmitt = <0x40 0x70>; + /* input schmitt disable value, match, mask */ + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + uart2_pmx_func: pinmux_uart2_pins at 0 { + pinctrl-single,pins = < + 0x150 0x4 /* GPIO29_UART2_CTS */ + 0x154 0x4 /* GPIO30_UART2_RTS */ + 0x158 0x4 /* GPIO31_UART2_TXD */ + 0x15c 0x4 /* GPIO32_UART2_RXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + uart3_pmx_func: pinmux_uart3_pins at 0 { + pinctrl-single,pins = < + 0x188 0x7 /* GPIO43_UART3_RXD */ + 0x18c 0x7 /* GPIO44_UART3_TXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + twsi1_pmx_func: pinmux_twsi1_pins at 0 { + pinctrl-single,pins = < + 0x1b0 0x2 /* GPIO53_TWSI_SCL */ + 0x1b4 0x2 /* GPIO54_TWSI_SDA */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + nand_pmx_func: pinmux_nand_pins at 0 { + pinctrl-single,pins = < + 0x040 0x0 /* ND_IO0 */ + 0x03c 0x0 /* ND_IO1 */ + 0x038 0x0 /* ND_IO2 */ + 0x034 0x0 /* ND_IO3 */ + 0x030 0x0 /* ND_IO4 */ + 0x02c 0x0 /* ND_IO5 */ + 0x028 0x0 /* ND_IO6 */ + 0x024 0x0 /* ND_IO7 */ + 0x020 0x0 /* ND_IO8 */ + 0x01c 0x0 /* ND_IO9 */ + 0x018 0x0 /* ND_IO10 */ + 0x014 0x0 /* ND_IO11 */ + 0x010 0x0 /* ND_IO12 */ + 0x00c 0x0 /* ND_IO13 */ + 0x008 0x0 /* ND_IO14 */ + 0x004 0x0 /* ND_IO15 */ + 0x044 0x0 /* ND_nCS0 */ + 0x060 0x1 /* ND_ALE */ + 0x05c 0x0 /* ND_CLE */ + 0x054 0x1 /* ND_nWE */ + 0x058 0x1 /* ND_nRE */ + 0x068 0x0 /* ND_RDY0 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc1_pmx_func1: pinmux_mmc1_pins at 0 { + pinctrl-single,pins = < + 0x0a0 0x0 /* MMC1_DATA0 */ + 0x09c 0x0 /* MMC1_DATA1 */ + 0x098 0x0 /* MMC1_DATA2 */ + 0x094 0x0 /* MMC1_DATA3 */ + 0x090 0x0 /* MMC1_DATA4 */ + 0x08c 0x0 /* MMC1_DATA5 */ + 0x088 0x0 /* MMC1_DATA6 */ + 0x084 0x0 /* MMC1_DATA7 */ + 0x0a4 0x0 /* MMC1_CMD */ + 0x0a8 0x0 /* MMC1_CLK */ + >; + pinctrl-single,slew-rate = <0x1800 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc1_pmx_func2: pinmux_mmc1_pins at 1 { + pinctrl-single,pins = < + 0x0ac 0x0 /* MMC1_CD */ + 0x0b0 0x0 /* MMC1_WP */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + mmc2_pmx_func: pinmux_mmc2_pins at 0 { + pinctrl-single,pins = < + 0x180 0x1 /* MMC2_CMD */ + 0x184 0x1 /* MMC2_CLK */ + 0x17c 0x1 /* MMC2_DATA0 */ + 0x178 0x1 /* MMC2_DATA1 */ + 0x174 0x1 /* MMC2_DATA2 */ + 0x170 0x1 /* MMC2_DATA3 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + ssp1_pmx_func: pinmux_ssp1_pins at 0 { + pinctrl-single,pins = < + 0x130 0x1 /* GPIO21_SSP1_SCLK */ + 0x134 0x1 /* GPIO22_SSP1_FRM */ + 0x138 0x1 /* GPIO23_SSP1_TXD */ + 0x13c 0x1 /* GPIO24_SSP1_RXD */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + keypad_pmx_func: pinmux_keypad_pins at 0 { + pinctrl-single,pins = < + 0x0dc 0x1 /* GPIO0_MKIN0 */ + 0x0e0 0x1 /* GPIO1_MKOUT0 */ + 0x0e4 0x1 /* GPIO2_MKIN1 */ + 0x0e8 0x1 /* GPIO3_MKOUT1 */ + 0x0ec 0x1 /* GPIO4_MKIN2 */ + 0x0f0 0x1 /* GPIO5_MKOUT2 */ + 0x0f4 0x1 /* GPIO6_MKIN3 */ + 0x0f8 0x1 /* GPIO7_MKOUT3 */ + 0x0fc 0x1 /* GPIO8_MKIN4 */ + 0x100 0x1 /* GPIO9_MKOUT4 */ + 0x10c 0x1 /* GPIO12_MKIN6 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x8000 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x2000 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + nfc_pmx_func: pinmux_nfc_pins at 0 { + pinctrl-single,pins = < + 0x120 0x0 /* GPIO17 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + wlan_pmx_func: pinmux_wlan_pins at 0 { + pinctrl-single,pins = < + 0x114 0x0 /* GPIO14 */ + 0x12c 0x0 /* GPIO20 */ + 0x160 0x0 /* GPIO33 */ + 0x164 0x0 /* GPIO34 */ + 0x168 0x0 /* GPIO35 */ + 0x16c 0x0 /* GPIO36 */ + >; + pinctrl-single,slew-rate = <0x1000 0x1800>; + pinctrl-single,bias-disable = <0x0 0x0 0x8000>; + pinctrl-single,bias-pullup = <0x0 0x4000 0x4000>; + pinctrl-single,bias-pulldown = <0x0 0x2000 0x2000>; + pinctrl-single,input-schmitt = <0x40 0x70>; + pinctrl-single,input-schmitt-disable = <0x40 0x40 0x70>; + }; + }; }; }; };arch/arm/boot/dts/pxa910.dtsi +27
-2@@ -93,28 +93,37 @@ #address-cells = <1>; #size-cells = <1>; reg = <0xd4019000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + marvell,gpio-ed-mask = <1>; + marvell,nr-gpios = <128>; interrupts = <49>; interrupt-names = "gpio_mux"; interrupt-controller; #interrupt-cells = <1>; + status = "disabled"; ranges; gcb0: gpio at d4019000 { reg = <0xd4019000 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb1: gpio at d4019004 { reg = <0xd4019004 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb2: gpio at d4019008 { reg = <0xd4019008 0x4>; + gpio-controller; + #gpio-cells = <2>; }; gcb3: gpio at d4019100 { reg = <0xd4019100 0x4>; + gpio-controller; + #gpio-cells = <2>; }; };@@ -144,6 +153,22 @@ interrupt-names = "rtc 1Hz", "rtc alarm"; status = "disabled"; }; + + pmx: pinmux at d401e000 { + compatible = "pinconf-single"; + reg = <0xd401e000 0x330>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; }; }; };
Signature · 2 lines
Regards, Igor.
v2 cover rework pxa gpio driver for pinctrl
In reply to Haojian ZhuangQuoted 4 lines · Haojian Zhuang
v2:
* Fix the build issue withoutCONFIG_OF
* Append to checkPINCTRL_SINGLEbecause of arch pxa not moved to DT
* Use bool for inverted,ed_mask, gafr variable
Haojian, does this series depend on the changes for DT in pinctrl-single, or can I merge it on its own?
The amount of patches makes me confused you know ... :-)
Yours,
Linus Walleij
v2 cover rework pxa gpio driver for pinctrl
Quoted 8 lines · Linus Walleij
Quoted 4 lines · Haojian Zhuang
v2:
* Fix the build issue withoutCONFIG_OF
* Append to checkPINCTRL_SINGLEbecause of arch pxa not moved to DT
* Use bool for inverted,ed_mask, gafr variable
Quoted 7 lines
Haojian, does this series depend on the changes for DT in pinctrl-single, or can I merge it on its own?
The amount of patches makes me confused you know ... :-)
Yours,
Linus Walleij
I'm waiting for Igor's test on PXA.
This patch series is used to support DT better. And the driver still works without DT support since there's no DT in PXA chips.
Only the 9th & 10th patches are related to pinctrl-single driver. You could skip them and I can move them into the pinctrl-single patch series.
Yes, these patches make people confusing. :) I'm sorry on inconvenience.
Regards
Haojian
v2 cover rework pxa gpio driver for pinctrl
Quoted 12 lines · Haojian Zhuang
Quoted 11 lines · Linus Walleij
Quoted 4 lines · Haojian Zhuang
v2:
* Fix the build issue withoutCONFIG_OF
* Append to checkPINCTRL_SINGLEbecause of arch pxa not moved to DT
* Use bool for inverted,ed_mask, gafr variableHaojian, does this series depend on the changes for DT in pinctrl-single, or can I merge it on its own?
Quoted 8 lines
Quoted 4 lines
The amount of patches makes me confused you know ... :-)
Yours,
Linus WalleijI'm waiting for Igor's test on PXA.
This patch series is used to support DT better. And the driver still works without DT support since there's no DT in PXA chips.
Wait a moment, I have a problem with NFS root:
IP-Config: Failed to open eth0
on both cm_x300 and em_x270.
Both machines use DM9000 and before the series,
the problem does not exist.
I will look into it tomorrow, but I have a feeling that it is related to the DM9000 interrupt line.
So, please, wait on merging this!
Signature · 2 lines
Regards, Igor.
v2 cover rework pxa gpio driver for pinctrl
Quoted 1 line · Igor Grinberg
Wait a moment, I have a problem with NFS root:
(...)
Quoted 1 line
So, please, wait on merging this!
OK holding back this patch set for now.
Yours,
Linus Walleij