mt76: mt7921: Add AP mode support
Subsystems (2)
[email protected]
reviewerPATCH v2 1/1 mt76: mt7921: Add AP mode support
From: Sean Wang <[email protected]>
add AP mode support to mt7921 that can work for mt7921[e,s,u] with the common code.
Tested-by Deren Wu <[email protected]>
Tested-by Lorenzo Bianconi <[email protected]>
Signed-off-by Sean Wang <[email protected]>
---v1->v2:
1. change 'hotspot mode' to 'AP mode' to avoid confusion
2. add a testing tag by Lorenzo
3. remove the unneeded bracket
--- .../net/wireless/mediatek/mt76/mt7921/init.c | 11 ++- .../net/wireless/mediatek/mt76/mt7921/mac.c | 9 +++ .../net/wireless/mediatek/mt76/mt7921/main.c | 45 +++++++++++ .../net/wireless/mediatek/mt76/mt7921/mcu.c | 79 ++++++++++++++++++- .../wireless/mediatek/mt76/mt7921/mt7921.h | 4 + 5 files changed, 146 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7921/init.c +10 -1
@@ -11,6 +11,10 @@ static const struct ieee80211_iface_limit if_limits[] = { { .max = MT7921_MAX_INTERFACES, .types = BIT(NL80211_IFTYPE_STATION) + }, + { + .max = 1, + .types = BIT(NL80211_IFTYPE_AP) } };
@@ -64,7 +68,8 @@ mt7921_init_wiphy(struct ieee80211_hw *hw) wiphy->iface_combinations = if_comb; wiphy->flags &= ~(WIPHY_FLAG_IBSS_RSN |WIPHY_FLAG_4ADDR_AP |WIPHY_FLAG_4ADDR_STATION ); - wiphy->interface_modes =BIT (NL80211_IFTYPE_STATION ); + wiphy->interface_modes =BIT (NL80211_IFTYPE_STATION ) | +BIT (NL80211_IFTYPE_AP ); wiphy->n_iface_combinations =ARRAY_SIZE (if_comb); wiphy->max_scan_ie_len =MT76_CONNAC_SCAN_IE_LEN ; wiphy->max_scan_ssids =4 ;
@@ -80,6 +85,10 @@ mt7921_init_wiphy(struct ieee80211_hw *hw) wiphy->features |=NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR |NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR ;wiphy_ext_feature_set (wiphy,NL80211_EXT_FEATURE_SET_SCAN_DWELL ); +wiphy_ext_feature_set (wiphy,NL80211_EXT_FEATURE_BEACON_RATE_LEGACY ); +wiphy_ext_feature_set (wiphy,NL80211_EXT_FEATURE_BEACON_RATE_HT ); +wiphy_ext_feature_set (wiphy,NL80211_EXT_FEATURE_BEACON_RATE_VHT ); +wiphy_ext_feature_set (wiphy,NL80211_EXT_FEATURE_BEACON_RATE_HE );ieee80211_hw_set (hw,SINGLE_SCAN_ON_ALL_BANDS );ieee80211_hw_set (hw,HAS_RATE_CONTROL );
drivers/net/wireless/mediatek/mt76/mt7921/mac.c +9 -0
@@ -1361,12 +1361,21 @@ mt7921_vif_connect_iter(void *priv, u8 *mac, {struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;struct mt7921_dev *dev = mvif->phy->dev; +struct ieee80211_hw *hw =mt76_hw (dev);if (vif->type ==NL80211_IFTYPE_STATION )ieee80211_disconnect (vif, true);mt76_connac_mcu_uni_add_dev (&dev->mphy, vif, &mvif->sta.wcid, true);mt7921_mcu_set_tx (dev, vif); + +if (vif->type ==NL80211_IFTYPE_AP ) { +mt76_connac_mcu_uni_add_bss (dev->phy.mt76, vif, &mvif->sta.wcid, + true); +mt7921_mcu_sta_update (dev,NULL , vif, true, +MT76_STA_INFO_STATE_NONE ); +mt7921_mcu_uni_add_beacon_offload (dev, hw, vif, true); + } }/* system error recovery */
drivers/net/wireless/mediatek/mt76/mt7921/main.c +45 -0
75 lines not on this page · raw message
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c +78 -1
88 lines not on this page · raw message
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h +4 -0
@@ -469,4 +469,8 @@ int mt7921u_wfsys_reset(struct mt7921_dev *dev);int mt7921u_dma_init (struct mt7921_dev *dev,bool resume);int mt7921u_init_reset (struct mt7921_dev *dev);int mt7921u_mac_reset (struct mt7921_dev *dev); +int mt7921_mcu_uni_add_beacon_offload (struct mt7921_dev *dev, +struct ieee80211_hw *hw, +struct ieee80211_vif *vif, +bool enable);#endif
Signature · 7 lines
2.25.1 _______________________________________________ Linux-mediatek mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-mediatek
Il 06/04/22 20:29, [email protected] ha scritto:
Quoted 8 lines
From: Sean Wang <[email protected]>
add AP mode support to mt7921 that can work for mt7921[e,s,u] with the common code.
Tested-by Deren Wu <[email protected]>Tested-by Lorenzo Bianconi <[email protected]>Signed-off-by Sean Wang <[email protected]>