bonding 802.3ad mode with bridge and tap devices
Subsystems (2)
Hello,
i'm using KVM with tapdevices on vanilla 3.7.7 kernel.
Layout:
eth0 ------
| -- bond0 --- vmbr0 ---- tap
eth1 ------
This works fine as long as i use active-backup mode. But if i switch to 802.3ad mode the host using vmbr0 as his default gw works fine but the tap device does not.
It starts to work fine again if i set eth0/eth1 into promiscious mode. Is this a kernel bug or my fault?
Thanks!
Greets,
Stefan