Skip to contentSkip to conversation

lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operation

SCSI Dan Carpenter 2 participants 2 messages Feb 5, 2013 – Feb 13, 2013 SCSI

lore
Share & tools
lore
#0 lore raw

Hello James Smart,

The patch 962bc51b04b2: "[SCSI] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operation" from Jan 3, 2013, leads to the following warning:
"drivers/scsi/lpfc/lpfc_sli.c:12818 lpfc_wq_create()

	 warn: 0x800 is larger than 8 bits"

[ This is from a not ready for release Smatch check. ]

drivers/scsi/lpfc/lpfc_sli.c
12818 if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE)

                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

fw_func_mode is unsigned char.
LPFC_DUA_MODE is 0x800.
This condition is always false because 0xff & 0x800 is zero.

12819 bf_set(lpfc_mbx_wq_create_dua, &wq_create->u.request, 1);
12820

 12821          rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
 12822          /* The IOCTL status is embedded in the mailbox subheader. */
 12823          shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
 12824          shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
 12825          if (shdr_status || shdr_add_status || rc) {
 12826                  lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 12827                                  "2503 WQ_CREATE mailbox failed with "
 12828                                  "status x%x add_status x%x, mbx status x%x\n",
 12829                                  shdr_status, shdr_add_status, rc);
 12830                  status = -ENXIO;
 12831                  goto out;
 12832          }
 12833          wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
 12834          if (wq->queue_id == 0xFFFF) {
 12835                  status = -ENXIO;
 12836                  goto out;
 12837          }
 12838          if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Same.

12839 wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
12840 &wq_create->u.response);
12841 if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&

regards,
dan carpenter

#1 lore raw

Dan,

Thanks for pointing this out. I'm addressing it as the first patch in 8.3.38, which I'll be pushing shortly.

-- james s

Quoted 48 lines · Dan Carpenter

Hello James Smart,

The patch 962bc51b04b2: "[SCSI] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operation" from Jan 3, 2013, leads to the following warning:
"drivers/scsi/lpfc/lpfc_sli.c:12818 lpfc_wq_create()

	 warn: 0x800 is larger than 8 bits"

[ This is from a not ready for release Smatch check. ]

drivers/scsi/lpfc/lpfc_sli.c
12818 if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE)

                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

fw_func_mode is unsigned char.
LPFC_DUA_MODE is 0x800.
This condition is always false because 0xff & 0x800 is zero.

12819 bf_set(lpfc_mbx_wq_create_dua, &wq_create->u.request, 1);
12820

  12821          rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
  12822          /* The IOCTL status is embedded in the mailbox subheader. */
  12823          shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
  12824          shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
  12825          if (shdr_status || shdr_add_status || rc) {
  12826                  lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
  12827                                  "2503 WQ_CREATE mailbox failed with "
  12828                                  "status x%x add_status x%x, mbx status x%x\n",
  12829                                  shdr_status, shdr_add_status, rc);
  12830                  status = -ENXIO;
  12831                  goto out;
  12832          }
  12833          wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
  12834          if (wq->queue_id == 0xFFFF) {
  12835                  status = -ENXIO;
  12836                  goto out;
  12837          }
  12838          if (phba->sli4_hba.fw_func_mode & LPFC_DUA_MODE) {
                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Same.

12839 wq->db_format = bf_get(lpfc_mbx_wq_create_db_format,
12840 &wq_create->u.response);
12841 if ((wq->db_format != LPFC_DB_LIST_FORMAT) &&

regards,
dan carpenter