Skip to contentSkip to conversation

"Fixing" mount points

DISCUSSION Bob McGowan 2 participants 3 messages Feb 18, 2013 – Feb 20, 2013 Btrfs file system

lore
Share & tools
lore
#0 lore raw

First, apologies if this is "well known", I'm totally new here, and haven't figured out yet how to search the archives.

Also, I'm not a subscriber, so please respond to me as well as the list.

I've had a number of issues with distribution installations (separate and unrelated issues, but history and context). I had a system set up, with a separate /home (brtfs, sda1), when it crashed (badly) while updating and rebuilding the kernel.

I installed again (different window system, same distribution) and to be "completely safe", I left the /home out of the new setup. I want (need) to keep it because it has a very large of digital photos and I'd rather not have to restore them again (between audio, video, the photos, DVD images, about 800GB).

So, I now have a volume/subvolume on one disk, where the subvolume is /home (brtfs, sde2), and I want to change fstab to mount sda1 as /home instead.

For any other FS I've worked with, simple edits of fstab would be enough, but doing so doesn't appear to be enough for btrfs.

Even though things look OK from the command line, logging in through the window system fails (actually, just hangs).

I assume this means I should be doing something to "clean up" the subvolume? Or maybe there's something in the Window system configuration to change?

I'm running Linux Mint 14 KDE. My fstab for the parts in question looks like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults,subvol=@     0       1
# /home was on /dev/sde2 during installation
UUID=1a...9 /home btrfs   defaults,subvol=@home 0       2

What I want is something like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults              0       1
# /home is on /dev/sda1
UUID=7f...3 /home btrfs   defaults              0       2

Thanks for bearing with me as I learn this new environment. ;-)

Bob

#1 lore raw
Quoted 17 lines · Bob McGowan

Even though things look OK from the command line, logging in through the window system fails (actually, just hangs).

I assume this means I should be doing something to "clean up" the subvolume? Or maybe there's something in the Window system configuration to change?

I'm running Linux Mint 14 KDE. My fstab for the parts in question looks like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults,subvol=@     0       1
# /home was on /dev/sde2 during installation
UUID=1a...9 /home btrfs   defaults,subvol=@home 0       2
Quoted 5 lines

What I want is something like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults              0       1
# /home is on /dev/sda1
UUID=7f...3 /home btrfs   defaults              0       2

The 2nd fstab implies a completely different disk, the first partition is btrfs, mounted as /home. So long as the contents are user folders, i.e. the same thing found in sde2 subvol @home, then it's functionally the same as what you had before.

Also, btrfs doesn't need fs_passno set.

Chris Murphy

#2 lore raw
Quoted 22 lines · Chris Murphy
Quoted 15 lines · Bob McGowan

Even though things look OK from the command line, logging in through the window system fails (actually, just hangs).

I assume this means I should be doing something to "clean up" the subvolume? Or maybe there's something in the Window system configuration to change?

I'm running Linux Mint 14 KDE. My fstab for the parts in question looks like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults,subvol=@     0       1
# /home was on /dev/sde2 during installation
UUID=1a...9 /home btrfs   defaults,subvol=@home 0       2
Quoted 5 lines

What I want is something like:

# / was on /dev/sde2 during installation
UUID=1a...9 /     btrfs   defaults              0       1
# /home is on /dev/sda1
UUID=7f...3 /home btrfs   defaults              0       2
Quoted 6 lines

The 2nd fstab implies a completely different disk, the first partition is btrfs, mounted as /home. So long as the contents are user folders, i.e. the same thing found in sde2 subvol @home, then it's functionally the same as what you had before.

Also, btrfs doesn't need fs_passno set.

Chris Murphy

Hi, Chris,

Thanks for the information. As for fs_passno, what you're seeing is what was put there by the install process. I'm assuming, if it's not needed, that the proper value would be zero?

You have confirmed what I thought was correct. But trying it the first time failed. My login acted as though the user was valid but login didn't complete, returning to the login screen.

Since I was just able to reconfigure fstab, and it worked, I'd say I probably fat fingered something and just didn't notice.

In any case, many thanks, again. ;)

Bob