Skip to contentSkip to conversation

rt2x00: allow AP and mesh mode to operate simultaneously

DISCUSSION Simon Arlott 2 participants 2 messages Feb 27, 2013 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 8 lines · Linux Kernel Mailing List
Gitweb:     http://git.kernel.org/linus/;a=commit;h=4a5fc6d7074de72dd836fbb9c5cd79f9a491871c
Commit:     4a5fc6d7074de72dd836fbb9c5cd79f9a491871c
Parent:     92941382e8b80c55a4ad06b88a3bf95110969693
Author:     Chun-Yeow Yeoh <[email protected]>
AuthorDate: Fri Jan 25 12:47:50 2013 +0800
Committer:  John W. Linville <[email protected]>
CommitDate: Wed Jan 30 15:06:44 2013 -0500
Quoted 6 lines

rt2x00: allow AP and mesh mode to operate simultaneously

Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset.

This breaks the probe of my RT3071 device (Tenda W322UA):

[ 4376.598444] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3071, rf: 0008, rev: 021c.
[ 4376.598700] ------------[ cut here ]------------
[ 4376.598717] WARNING: at net/wireless/core.c:443 wiphy_register+0x549/0x6c0 [cfg80211]()
[ 4376.598719] Hardware name: empty
[ 4376.598721] Modules linked in: rt2800usb(+) rt2800lib rt2x00usb rt2x00lib mac80211 cfg80211 8021q garp bnep rfcomm bridge stp ext4 jbd2 nf_conntrack_ipv6 ipt_REJECT nf_defrag_ipv6 iptable_filter xt_state iptable_mangle ip6t_REJECT iptable_nat xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip6table_filter xt_dscp xt_string xt_owner xt_NFQUEUE xt_multiport xt_mark xt_iprange xt_hashlimit xt_conntrack ip_tables xt_connmark nf_conntrack ip6_tables x_tables fuse btusb crc_ccitt kvm_amd bluetooth kvm zaurus cdc_ether usbnet crc16 [last unloaded: cfg80211]
[ 4376.598758] Pid: 15052, comm: modprobe Tainted: G        W    3.8.0+ #09507-g19cd6a2
[ 4376.598760] Call Trace:
[ 4376.598770]  [<ffffffff8104912a>] warn_slowpath_common+0x7a/0xc0
[ 4376.598773]  [<ffffffff81049185>] warn_slowpath_null+0x15/0x20
[ 4376.598779]  [<ffffffffa0293a79>] wiphy_register+0x549/0x6c0 [cfg80211]
[ 4376.598786]  [<ffffffffa002c57f>] ? rt2x00lib_probe_dev+0x34f/0x770 [rt2x00lib]
[ 4376.598801]  [<ffffffffa02c75e7>] ieee80211_register_hw+0x3a7/0x830 [mac80211]
[ 4376.598805]  [<ffffffffa002c7c2>] rt2x00lib_probe_dev+0x592/0x770 [rt2x00lib]
[ 4376.598809]  [<ffffffffa001c320>] rt2x00usb_probe+0x160/0x220 [rt2x00usb]
[ 4376.598818]  [<ffffffffa00ef240>] rt2800usb_probe+0x10/0x20 [rt2800usb]
[ 4376.598830]  [<ffffffff814b6b78>] usb_probe_interface+0x1d8/0x2b0
[ 4376.598835]  [<ffffffff81411406>] driver_probe_device+0x76/0x230
[ 4376.598838]  [<ffffffff8141165b>] __driver_attach+0x9b/0xa0
[ 4376.598842]  [<ffffffff814115c0>] ? driver_probe_device+0x230/0x230
[ 4376.598845]  [<ffffffff8140f916>] bus_for_each_dev+0x56/0x90
[ 4376.598849]  [<ffffffff81410f59>] driver_attach+0x19/0x20
[ 4376.598851]  [<ffffffff81410a96>] bus_add_driver+0xf6/0x260
[ 4376.598854]  [<ffffffff81411b73>] driver_register+0x73/0x160
[ 4376.598858]  [<ffffffffa010a000>] ? 0xffffffffa0109fff
[ 4376.598861]  [<ffffffff814b587a>] usb_register_driver+0x9a/0x150
[ 4376.598879]  [<ffffffffa010a000>] ? 0xffffffffa0109fff
[ 4376.598892]  [<ffffffffa010a01e>] rt2800usb_driver_init+0x1e/0x1000 [rt2800usb]
[ 4376.598906]  [<ffffffff810002f6>] do_one_initcall+0x116/0x160
[ 4376.598915]  [<ffffffff810986a2>] load_module+0x1b52/0x22a0
[ 4376.598918]  [<ffffffff810947c0>] ? sys_getegid16+0x50/0x50
[ 4376.598922]  [<ffffffff81098e94>] sys_init_module+0xa4/0xd0
[ 4376.598927]  [<ffffffff817544d6>] system_call_fastpath+0x1a/0x1f
[ 4376.598929] ---[ end trace 52dc8aa1355df590 ]---
[ 4376.598932] interface_modes=0000007e types=00000088 <-- interface_modes does not contain NL80211_IFTYPE_MESH_POINT
[ 4376.598934] phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw.
[ 4376.598958] rt2800usb: probe of 1-4.6:1.0 failed with error -22
Quoted 22 lines
---
 drivers/net/wireless/rt2x00/rt2x00dev.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/net/wireless/rt2x00/rt2x00dev.c +2 -1
index 92a0aa5..1031db6 100644
@@ -1236,7 +1236,8 @@ static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
 	 */
 	if_limit = &rt2x00dev->if_limits_ap;
 	if_limit->max = rt2x00dev->ops->max_ap_intf;
-	if_limit->types = BIT(NL80211_IFTYPE_AP);
+	if_limit->types = BIT(NL80211_IFTYPE_AP) |
+			BIT(NL80211_IFTYPE_MESH_POINT);
 
 	/*
 	 * Build up AP interface combinations structure.
Signature · 1 line
Simon Arlott
#2 lore raw

Hi, Simon

Thanks for reporting. It seems that I have not done enough testing on this.

Anyway, Felix has submitted a patch on this:
http://www.spinics.net/lists/linux-wireless/msg104045.html

----
Chun-Yeow

Quoted 79 lines · Simon Arlott
Quoted 8 lines · Linux Kernel Mailing List
Gitweb:     http://git.kernel.org/linus/;a=commit;h=4a5fc6d7074de72dd836fbb9c5cd79f9a491871c
Commit:     4a5fc6d7074de72dd836fbb9c5cd79f9a491871c
Parent:     92941382e8b80c55a4ad06b88a3bf95110969693
Author:     Chun-Yeow Yeoh <[email protected]>
AuthorDate: Fri Jan 25 12:47:50 2013 +0800
Committer:  John W. Linville <[email protected]>
CommitDate: Wed Jan 30 15:06:44 2013 -0500
Quoted 6 lines

rt2x00: allow AP and mesh mode to operate simultaneously

Allow AP and Mesh mode to operate concurrently using single radio. Verify this using fonera 2.0n featuring RT3052 chipset and also TP-LINK TL-WN727N featuring RT5370 chipset.

This breaks the probe of my RT3071 device (Tenda W322UA):

[ 4376.598444] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3071, rf: 0008, rev: 021c.
[ 4376.598700] ------------[ cut here ]------------
[ 4376.598717] WARNING: at net/wireless/core.c:443 wiphy_register+0x549/0x6c0 [cfg80211]()
[ 4376.598719] Hardware name: empty
[ 4376.598721] Modules linked in: rt2800usb(+) rt2800lib rt2x00usb rt2x00lib mac80211 cfg80211 8021q garp bnep rfcomm bridge stp ext4 jbd2 nf_conntrack_ipv6 ipt_REJECT nf_defrag_ipv6 iptable_filter xt_state iptable_mangle ip6t_REJECT iptable_nat xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip6table_filter xt_dscp xt_string xt_owner xt_NFQUEUE xt_multiport xt_mark xt_iprange xt_hashlimit xt_conntrack ip_tables xt_connmark nf_conntrack ip6_tables x_tables fuse btusb crc_ccitt kvm_amd bluetooth kvm zaurus cdc_ether usbnet crc16 [last unloaded: cfg80211]
[ 4376.598758] Pid: 15052, comm: modprobe Tainted: G        W    3.8.0+ #09507-g19cd6a2
[ 4376.598760] Call Trace:
[ 4376.598770]  [<ffffffff8104912a>] warn_slowpath_common+0x7a/0xc0
[ 4376.598773]  [<ffffffff81049185>] warn_slowpath_null+0x15/0x20
[ 4376.598779]  [<ffffffffa0293a79>] wiphy_register+0x549/0x6c0 [cfg80211]
[ 4376.598786]  [<ffffffffa002c57f>] ? rt2x00lib_probe_dev+0x34f/0x770 [rt2x00lib]
[ 4376.598801]  [<ffffffffa02c75e7>] ieee80211_register_hw+0x3a7/0x830 [mac80211]
[ 4376.598805]  [<ffffffffa002c7c2>] rt2x00lib_probe_dev+0x592/0x770 [rt2x00lib]
[ 4376.598809]  [<ffffffffa001c320>] rt2x00usb_probe+0x160/0x220 [rt2x00usb]
[ 4376.598818]  [<ffffffffa00ef240>] rt2800usb_probe+0x10/0x20 [rt2800usb]
[ 4376.598830]  [<ffffffff814b6b78>] usb_probe_interface+0x1d8/0x2b0
[ 4376.598835]  [<ffffffff81411406>] driver_probe_device+0x76/0x230
[ 4376.598838]  [<ffffffff8141165b>] __driver_attach+0x9b/0xa0
[ 4376.598842]  [<ffffffff814115c0>] ? driver_probe_device+0x230/0x230
[ 4376.598845]  [<ffffffff8140f916>] bus_for_each_dev+0x56/0x90
[ 4376.598849]  [<ffffffff81410f59>] driver_attach+0x19/0x20
[ 4376.598851]  [<ffffffff81410a96>] bus_add_driver+0xf6/0x260
[ 4376.598854]  [<ffffffff81411b73>] driver_register+0x73/0x160
[ 4376.598858]  [<ffffffffa010a000>] ? 0xffffffffa0109fff
[ 4376.598861]  [<ffffffff814b587a>] usb_register_driver+0x9a/0x150
[ 4376.598879]  [<ffffffffa010a000>] ? 0xffffffffa0109fff
[ 4376.598892]  [<ffffffffa010a01e>] rt2800usb_driver_init+0x1e/0x1000 [rt2800usb]
[ 4376.598906]  [<ffffffff810002f6>] do_one_initcall+0x116/0x160
[ 4376.598915]  [<ffffffff810986a2>] load_module+0x1b52/0x22a0
[ 4376.598918]  [<ffffffff810947c0>] ? sys_getegid16+0x50/0x50
[ 4376.598922]  [<ffffffff81098e94>] sys_init_module+0xa4/0xd0
[ 4376.598927]  [<ffffffff817544d6>] system_call_fastpath+0x1a/0x1f
[ 4376.598929] ---[ end trace 52dc8aa1355df590 ]---
[ 4376.598932] interface_modes=0000007e types=00000088 <-- interface_modes does not contain NL80211_IFTYPE_MESH_POINT
[ 4376.598934] phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw.
[ 4376.598958] rt2800usb: probe of 1-4.6:1.0 failed with error -22
Quoted 13 lines
---
 drivers/net/wireless/rt2x00/rt2x00dev.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/net/wireless/rt2x00/rt2x00dev.c +0 -0
index 92a0aa5..1031db6 100644

drivers/net/wireless/rt2x00/rt2x00dev.c static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev) · line 1243

Quoted 9 lines
drivers/net/wireless/rt2x00/rt2x00dev.c +2 -1
@@ -1236,7 +1236,8 @@ static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
       */
      if_limit = &rt2x00dev->if_limits_ap;
      if_limit->max = rt2x00dev->ops->max_ap_intf;
-     if_limit->types = BIT(NL80211_IFTYPE_AP);
+     if_limit->types = BIT(NL80211_IFTYPE_AP) |
+                     BIT(NL80211_IFTYPE_MESH_POINT);
 
      /*
       * Build up AP interface combinations structure.

--
Simon Arlott