Allow AM335x MPU core clock speed to be specified in the board config file
PATCH v3 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:-
#define CONFIG_SYS_MPUCLK <desired clock freq in Hz>
---
Changes in v3:
- Changed from V_MPUCLK to CONFIG_SYS_MPUCLK
- Added entry in README
Changes in v2:
- Tweaked after comments from Peter Korsgaard
README | 4 ++++ arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 7 +++++-- 2 files changed, 9 insertions(+), 2 deletions(-)
README +4 -0
@@ -3820,6 +3820,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in Hz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: -----------------------------------
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +5 -2
@@ -21,8 +21,11 @@#define OSC (V_OSCK/1000000) -/* MAIN PLL Fdll = 550 MHZ, */ -#define MPUPLL_M 550 +/* MAIN PLL Fdll = 550 MHz, by default */ +#ifndef CONFIG_SYS_MPUCLK +#define CONFIG_SYS_MPUCLK 550000000 +#endif +#define MPUPLL_M (CONFIG_SYS_MPUCLK/1000000)#define MPUPLL_N (OSC-1)#define MPUPLL_M2 1
Signature · 1 line
1.7.9.5
PATCH v3 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
Dear Mark Jackson,
Quoted 4 lines · In message <[email protected]> you wrote:
Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:-
#define
CONFIG_SYS_MPUCLK<desired clock freq in Hz>
Why do you claim an accuracy of Hz here, when in the code you silently throw away any sub-MHz parts anyway? Why not leaving it at MHz as it was before, and as used in the code?
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There are three ways to get something done:
(1) Do it yourself.
(2) Hire someone to do it for you.
(3) Forbid your kids to do it.PATCH v3 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
Quoted 11 lines · Wolfgang Denk
Dear Mark Jackson,
Quoted 4 lines · In message <[email protected]> you wrote:
Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:-
#define
CONFIG_SYS_MPUCLK<desired clock freq in Hz>Why do you claim an accuracy of Hz here, when in the code you silently throw away any sub-MHz parts anyway? Why not leaving it at MHz as it was before, and as used in the code?
I was simply copying the format of the existing V_OSCK defines, but I'm happy to change it.
Regards
Mark J.