Skip to contentSkip to conversation

EXYNOS5: Add audio support for Snow

PATCH New Rajeshwari Shinde 5 participants 13 messages Feb 15, 2013 – Apr 5, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover EXYNOS5: Add audio support for Snow

Driver for MAX98095 is added and support for same is incorporated in sound driver and Snow Board.
This patchset is based on top of
"EXYNOS5: SNOW: Add initial dts and config file"

Changes in V2:
- Corrected multi-line comment style
Changes in V3:
- Removed non DT support for MAX98095
- Config for both MAX98095 and WM8994 added in
exynos5 config file.
Changes in V4:
- Separated the patches to create initial dts and config file for Snow
- Modified XXTI clock source function as per Exynos naming convention

Rajeshwari Shinde (6):
EXYNOS5: Add function to enable XXTI clock source
Sound: MAX98095: Add the driver for codec
Sound: Support for MAX98095 codec in driver
EXYNOS5: GPIO to enable MAX98095
EXYNOS5: FDT: Add compatible strings for MAX98095
config: Snow: Enable MAX98095 codec

 arch/arm/cpu/armv7/exynos/power.c        |   17 +
 arch/arm/include/asm/arch-exynos/power.h |   11 +
 board/samsung/smdk5250/smdk5250.c        |   15 +
 drivers/sound/Makefile                   |    1 +
 drivers/sound/max98095.c                 |  550 ++++++++++++++++++++++++++++++
 drivers/sound/max98095.h                 |  311 +++++++++++++++++
 drivers/sound/sound.c                    |    9 +-
 include/configs/exynos5250-dt.h          |    1 +
 include/fdtdec.h                         |    1 +
 include/sound.h                          |    1 +
 lib/fdtdec.c                             |    1 +
 11 files changed, 916 insertions(+), 2 deletions(-)
 create mode 100644 drivers/sound/max98095.c
 create mode 100644 drivers/sound/max98095.h
Signature · 1 line
1.7.4.4
#1 lore raw

PATCH v4 1/6 EXYNOS5: Add function to enable XXTI clock source

This patch adds funtion to enable XXTI clock source required by MAX98095 codec.

---
Changes in V2:
- Corrected multi-line comment style
Changes in V3:
- None
Changes in V4:
- Modified XXTI clock source function as per Exynos naming convention

 arch/arm/cpu/armv7/exynos/power.c        |   17 +++++++++++++++++
 arch/arm/include/asm/arch-exynos/power.h |   11 +++++++++++
 2 files changed, 28 insertions(+), 0 deletions(-)
arch/arm/cpu/armv7/exynos/power.c +17 -0
index 400c8bc..db7249e 100644
@@ -111,3 +111,20 @@ void set_ps_hold_ctrl(void)
 	if (cpu_is_exynos5())
 		exynos5_set_ps_hold_ctrl();
 }
+
+
+static void exynos5_set_xclkout(void)
+{
+	struct exynos5_power *power =
+		(struct exynos5_power *)samsung_get_base_power();
+
+	/* use xxti for xclk out */
+	clrsetbits_le32(&power->pmu_debug, PMU_DEBUG_CLKOUT_SEL_MASK,
+				PMU_DEBUG_XXTI);
+}
+
+void set_xclkout(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_xclkout();
+}
arch/arm/include/asm/arch-exynos/power.h +11 -0
index f2f73fa..5f26337 100644
@@ -873,4 +873,15 @@ void set_dp_phy_ctrl(unsigned int enable);
  * (e.g. power button).
  */
 void set_ps_hold_ctrl(void);
+
+/* PMU_DEBUG bits [12:8] = 0x1000 selects XXTI clock source */
+#define PMU_DEBUG_XXTI                          0x1000
+/* Mask bit[12:8] for xxti clock selection */
+#define PMU_DEBUG_CLKOUT_SEL_MASK               0x1f00
+
+/*
+ * Pmu debug is used for xclkout, enable xclkout with
+ * source as XXTI
+ */
+void set_xclkout(void);
 #endif
Signature · 1 line
1.7.4.4
#2 lore raw

PATCH v4 2/6 Sound: MAX98095: Add the driver for codec

In reply to Rajeshwari Shinde

This patch adds the driver for codec MAX98095 required by Snow Board

---
Chnages in V2:
- None
Changes in V3:
- None
Changes in V4:
- None

 drivers/sound/Makefile   |    1 +
 drivers/sound/max98095.c |  550 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/sound/max98095.h |  311 ++++++++++++++++++++++++++
 3 files changed, 862 insertions(+), 0 deletions(-)
 create mode 100644 drivers/sound/max98095.c
 create mode 100644 drivers/sound/max98095.h
drivers/sound/Makefile +1 -0
index 8fdffb1..1987ca1 100644
@@ -28,6 +28,7 @@ LIB	:= $(obj)libsound.o
 COBJS-$(CONFIG_SOUND)	+= sound.o
 COBJS-$(CONFIG_I2S)	+= samsung-i2s.o
 COBJS-$(CONFIG_SOUND_WM8994)	+= wm8994.o
+COBJS-$(CONFIG_SOUND_MAX98095)	+= max98095.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
drivers/sound/max98095.c new file +550 -0

550 lines not on this page · raw message

drivers/sound/max98095.h new file +311 -0

311 lines not on this page · raw message

Signature · 1 line
1.7.4.4
#4 lore raw

PATCH v4 2/6 Sound: MAX98095: Add the driver for codec

Hi all,

I am working on ODROID PC Exynos-4 Board (Cortex-A9). In that board i am working MAX98089 Audio codec.

How to initialize this audio codec and how to test this one in UBOOT level.

Can you please help me on this.

Thanks

Prem V.

Quoted 13 lines · Simon Glass
Quoted 4 lines · Rajeshwari Shinde

This patch adds the driver for codec MAX98095 required by Snow Board

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#5 lore raw

PATCH v4 2/6 Sound: MAX98095: Add the driver for codec

Hi Prem S,

We initialise MAX98095 using device tree, if you don't have a device tree support u need to have a asm/arch/sound.h
which will initialise all values like sample rate, codec type, etc.. Actually in u-boot we have added audio support to play a beep sound. You can have look at drivers/sound/sound.c
To test the same you can have look at common/cmd_sound.c, where we have 2 commands
sound init and sound play.

Hope this information will help you.

Signature · 2 lines
Regards,
Rajeshwari Shinde
Quoted 34 lines · prem s

Hi all,

I am working on ODROID PC Exynos-4 Board (Cortex-A9). In that board i am working MAX98089 Audio codec.

How to initialize this audio codec and how to test this one in UBOOT level.

Can you please help me on this.

Thanks

Prem V.

Quoted 5 lines · Simon Glass
Quoted 3 lines · Rajeshwari Shinde

This patch adds the driver for codec MAX98095 required by Snow Board

Quoted 8 lines
Quoted 1 line

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#6 lore raw

PATCH v4 3/6 Sound: Support for MAX98095 codec in driver

In reply to Rajeshwari Shinde

This patchs adds support for MAX98095 codec in
sound driver.

---
Changes in V2:
- None
Chnages in V3:
- Removed non DT support for MAX98095
Changes in V4:
- None

 drivers/sound/sound.c |    9 +++++++--
 include/sound.h       |    1 +
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/sound/sound.c +7 -2
index fa8432d..a4bf4ad 100644
@@ -31,6 +31,7 @@
 #include <sound.h>
 #include <asm/arch/sound.h>
 #include "wm8994.h"
+#include "max98095.h"
 
 /* defines */
 #define SOUND_400_HZ 400
@@ -149,11 +150,15 @@ static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
 			pi2s_tx->samplingrate,
 			(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
 			pi2s_tx->bitspersample, pi2s_tx->channels);
+	} else if (!strcmp(codectype, "max98095")) {
+		ret = max98095_init(blob, pi2s_tx->samplingrate,
+				(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				pi2s_tx->bitspersample);
 	} else {
-		debug("%s: Unknown code type %s\n", __func__,
-		      codectype);
+		debug("%s: Unknown codec type %s\n", __func__, codectype);
 		return -1;
 	}
+
 	if (ret) {
 		debug("%s: Codec init failed\n", __func__);
 		return -1;
include/sound.h +1 -0
index d73839d..94922f6 100644
@@ -28,6 +28,7 @@
 enum en_sound_codec {
 	CODEC_WM_8994,
 	CODEC_WM_8995,
+	CODEC_MAX_98095,
 	CODEC_MAX
 };
 
Signature · 1 line
1.7.4.4
#7 lore raw

PATCH v4 3/6 Sound: Support for MAX98095 codec in driver

Hi Rajeshwari,

Quoted 4 lines · Rajeshwari Shinde

This patchs adds support for MAX98095 codec in
sound driver.

Quoted 11 lines

---
Changes in V2:
- None
Chnages in V3:
- Removed non DT support for MAX98095
Changes in V4:
- None

 drivers/sound/sound.c |    9 +++++++--
 include/sound.h       |    1 +
 2 files changed, 8 insertions(+), 2 deletions(-)
#8 lore raw

PATCH v4 4/6 EXYNOS5: GPIO to enable MAX98095

In reply to Rajeshwari Shinde

This patch sets high a GPIO to enable the codec MAX98095

---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- None

 board/samsung/smdk5250/smdk5250.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
board/samsung/smdk5250/smdk5250.c +15 -0
index ffc5ee5..6f6f2c2 100644
@@ -56,6 +56,18 @@ int board_usb_vbus_init(void)
 }
 #endif
 
+#ifdef CONFIG_SOUND_MAX98095
+static void  board_enable_audio_codec(void)
+{
+	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+						samsung_get_base_gpio_part1();
+
+	/* Enable MAX98095 Codec */
+	s5p_gpio_direction_output(&gpio1->x1, 7, 1);
+	s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+}
+#endif
+
 int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
@@ -65,6 +77,9 @@ int board_init(void)
 #ifdef CONFIG_USB_EHCI_EXYNOS
 	board_usb_vbus_init();
 #endif
+#ifdef CONFIG_SOUND_MAX98095
+	board_enable_audio_codec();
+#endif
 	return 0;
 }
 
Signature · 1 line
1.7.4.4
#9 lore raw

PATCH v4 5/6 EXYNOS5: FDT: Add compatible strings for MAX98095

In reply to Rajeshwari Shinde

Add required compatible information for MAX98095 codec

---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- None

 include/fdtdec.h |    1 +
 lib/fdtdec.c     |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)
include/fdtdec.h +1 -0
index 77f244f..b885a95 100644
@@ -81,6 +81,7 @@ enum fdt_compat_id {
 	COMPAT_SAMSUNG_EXYNOS_EHCI,	/* Exynos EHCI controller */
 	COMPAT_SAMSUNG_EXYNOS_USB_PHY,	/* Exynos phy controller for usb2.0 */
 	COMPAT_MAXIM_MAX77686_PMIC,	/* MAX77686 PMIC */
+	COMPAT_MAXIM_98095_CODEC,	/* MAX98095 Codec */
 
 	COMPAT_COUNT,
 };
lib/fdtdec.c +1 -0
index 3ae348d..9a527ff 100644
@@ -56,6 +56,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
 	COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
 	COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
+	COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)
Signature · 1 line
1.7.4.4
#10 lore raw

PATCH v4 6/6 config: Snow: Enable MAX98095 codec

In reply to Rajeshwari Shinde

This patch enables MAX98095 codec required for Snow

---
Changes in V4
- New patch.

 include/configs/exynos5250-dt.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/exynos5250-dt.h +1 -0
index cabd2f2..89fcda5 100644
@@ -296,6 +296,7 @@
 #ifdef CONFIG_CMD_SOUND
 #define CONFIG_SOUND
 #define CONFIG_I2S
+#define CONFIG_SOUND_MAX98095
 #define CONFIG_SOUND_WM8994
 #endif
 
Signature · 1 line
1.7.4.4
#11 lore raw

PATCH v4 6/6 config: Snow: Enable MAX98095 codec

Quoted 3 lines · Rajeshwari Shinde

This patch enables MAX98095 codec required for Snow

Quoted 21 lines

---
Changes in V4
- New patch.

 include/configs/exynos5250-dt.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
include/configs/exynos5250-dt.h +1 -1
index cabd2f2..89fcda5 100644
@@ -296,6 +296,7 @@
 #ifdef CONFIG_CMD_SOUND
 #define CONFIG_SOUND
 #define CONFIG_I2S
+#define CONFIG_SOUND_MAX98095
 #define CONFIG_SOUND_WM8994
 #endif
 
--

1.7.4.4

#12 lore raw

v4 cover EXYNOS5: Add audio support for Snow

In reply to Rajeshwari Shinde
Quoted 24 lines · Rajeshwari Shinde

Driver for MAX98095 is added and support for same is incorporated in sound driver and Snow Board.
This patchset is based on top of
"EXYNOS5: SNOW: Add initial dts and config file"

Changes in V2:
- Corrected multi-line comment style
Changes in V3:
- Removed non DT support for MAX98095
- Config for both MAX98095 and WM8994 added in
exynos5 config file.
Changes in V4:
- Separated the patches to create initial dts and config file for Snow
- Modified XXTI clock source function as per Exynos naming convention

Rajeshwari Shinde (6):
EXYNOS5: Add function to enable XXTI clock source
Sound: MAX98095: Add the driver for codec
Sound: Support for MAX98095 codec in driver
EXYNOS5: GPIO to enable MAX98095
EXYNOS5: FDT: Add compatible strings for MAX98095
config: Snow: Enable MAX98095 codec

Quoted 15 lines
 arch/arm/cpu/armv7/exynos/power.c        |   17 +
 arch/arm/include/asm/arch-exynos/power.h |   11 +
 board/samsung/smdk5250/smdk5250.c        |   15 +
 drivers/sound/Makefile                   |    1 +
 drivers/sound/max98095.c                 |  550 ++++++++++++++++++++++++++++++
 drivers/sound/max98095.h                 |  311 +++++++++++++++++
 drivers/sound/sound.c                    |    9 +-
 include/configs/exynos5250-dt.h          |    1 +
 include/fdtdec.h                         |    1 +
 include/sound.h                          |    1 +
 lib/fdtdec.c                             |    1 +
 11 files changed, 916 insertions(+), 2 deletions(-)
 create mode 100644 drivers/sound/max98095.c
 create mode 100644 drivers/sound/max98095.h

applied to u-boot-samsung.

Thanks,
Minkyu Kang.