Skip to contentSkip to conversation

Add TMU support for Exynos5250 based SMDK5250

PATCH New Akshay Saraswat 2 participants 10 messages Feb 25, 2013 – Mar 12, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v11 cover Add TMU support for Exynos5250 based SMDK5250

This patch series adds support for TMU driver using device tree for Exynos5250 based SMDK5250 board.

Changes since v10:
- Patch-1: Renamed asm/arch/exynos-tmu.h to asm/arch/tmu.h.
- Patch-2: None.
- Patch-3: None.
- Patch-4: None.
- Patch-5: None.
- Patch-6: None.
- Patch-7: None.
- Patch-8: None.

Akshay Saraswat (8):
Exynos5: TMU: Add driver for Thermal Management Unit
Exynos5: FDT: Add TMU device node values
Exynos5: TMU: Add TMU init and status check
Exynos5: Config: Enable support for Exynos TMU driver
TMU: Add TMU support in dtt command
Exynos5: Config: Enable dtt command for TMU
Exynos5: TMU: Add hardware tripping
Exynos5: FDT: Add a H/W-trip member to TMU node

 arch/arm/cpu/armv7/exynos/power.c         |  12 ++
 arch/arm/dts/exynos5250.dtsi              |   5 +
 arch/arm/include/asm/arch-exynos/power.h  |   4 +
 arch/arm/include/asm/arch-exynos/tmu.h    |  58 ++++++
 board/samsung/dts/exynos5250-smdk5250.dts |  13 ++
 board/samsung/smdk5250/smdk5250.c         |  39 ++++
 common/cmd_dtt.c                          |  32 ++-
 doc/device-tree-bindings/exynos/tmu.txt   |  44 +++++
 drivers/power/Makefile                    |   1 +
 drivers/power/exynos-tmu.c                | 319 ++++++++++++++++++++++++++++++
 include/configs/exynos5250-dt.h           |   5 +
 include/fdtdec.h                          |   1 +
 include/tmu.h                             |  46 +++++
 lib/fdtdec.c                              |   1 +
 14 files changed, 579 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/arch-exynos/tmu.h
 create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
 create mode 100644 drivers/power/exynos-tmu.c
 create mode 100644 include/tmu.h
Signature · 1 line
1.8.0
#1 lore raw

PATCH v11 1/8 Exynos5: TMU: Add driver for Thermal Management Unit

Adding Exynos Thermal Management Unit driver to monitor SOC temperature and take actions corresponding to states of TMU.

---
Changes since v10:
- Renamed as/asch/exynos-tmu.h to asm/arch/tmu.h.

 arch/arm/include/asm/arch-exynos/tmu.h |  58 +++++++
 drivers/power/Makefile                 |   1 +
 drivers/power/exynos-tmu.c             | 304 +++++++++++++++++++++++++++++++++
 include/tmu.h                          |  46 +++++
 4 files changed, 409 insertions(+)
 create mode 100644 arch/arm/include/asm/arch-exynos/tmu.h
 create mode 100644 drivers/power/exynos-tmu.c
 create mode 100644 include/tmu.h
arch/arm/include/asm/arch-exynos/tmu.h new file +58 -0
new file mode 100644
index 0000000..31399b0
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *      http://www.samsung.com
+ * Akshay Saraswat <[email protected]>
+ *
+ * EXYNOS - Thermal Management Unit
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_TMU_H
+#define __ASM_ARCH_TMU_H
+
+struct exynos5_tmu_reg {
+	unsigned triminfo;
+	unsigned rsvd1;
+	unsigned rsvd2;
+	unsigned rsvd3;
+	unsigned rsvd4;
+	unsigned triminfo_control;
+	unsigned rsvd5;
+	unsigned rsvd6;
+	unsigned tmu_control;
+	unsigned rsvd7;
+	unsigned tmu_status;
+	unsigned sampling_internal;
+	unsigned counter_value0;
+	unsigned counter_value1;
+	unsigned rsvd8;
+	unsigned rsvd9;
+	unsigned current_temp;
+	unsigned rsvd10;
+	unsigned rsvd11;
+	unsigned rsvd12;
+	unsigned threshold_temp_rise;
+	unsigned threshold_temp_fall;
+	unsigned rsvd13;
+	unsigned rsvd14;
+	unsigned past_temp3_0;
+	unsigned past_temp7_4;
+	unsigned past_temp11_8;
+	unsigned past_temp15_12;
+	unsigned inten;
+	unsigned intstat;
+	unsigned intclear;
+	unsigned rsvd15;
+	unsigned emul_con;
+};
+#endif /* __ASM_ARCH_TMU_H */
drivers/power/Makefile +1 -0
index 8c71901..1dac16a 100644
@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libpower.o
 
+COBJS-$(CONFIG_EXYNOS_TMU)	+= exynos-tmu.o
 COBJS-$(CONFIG_FTPMU010_POWER)	+= ftpmu010.o
 COBJS-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
 COBJS-$(CONFIG_TWL4030_POWER)	+= twl4030.o
drivers/power/exynos-tmu.c new file +304 -0

304 lines not on this page · raw message

include/tmu.h new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
1.8.0
#2 lore raw

PATCH v11 2/8 Exynos5: FDT: Add TMU device node values

In reply to Akshay Saraswat

Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values.

---
Changes since v10:
- None.

 arch/arm/dts/exynos5250.dtsi              |  5 ++++
 board/samsung/dts/exynos5250-smdk5250.dts | 12 +++++++++
 doc/device-tree-bindings/exynos/tmu.txt   | 41 +++++++++++++++++++++++++++++++
 include/fdtdec.h                          |  1 +
 lib/fdtdec.c                              |  1 +
 5 files changed, 60 insertions(+)
 create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
arch/arm/dts/exynos5250.dtsi +5 -0
index ed8c8dd..61d35a8 100644
@@ -151,4 +151,9 @@
 		};
 	};
 
+	tmu at 10060000 {
+		compatible = "samsung,exynos-tmu";
+		reg = <0x10060000 0x10000>;
+	};
+
 };
board/samsung/dts/exynos5250-smdk5250.dts +12 -0
index cbfab6f..00dac40 100644
@@ -66,4 +66,16 @@
 			compatible = "maxim,max77686_pmic";
 		};
 	};
+
+	tmu at 10060000 {
+		samsung,min-temp	= <25>;
+		samsung,max-temp	= <125>;
+		samsung,start-warning	= <95>;
+		samsung,start-tripping	= <105>;
+		samsung,efuse-min-value	= <40>;
+		samsung,efuse-value	= <55>;
+		samsung,efuse-max-value	= <100>;
+		samsung,slope		= <274761730>;
+		samsung,dc-value	= <25>;
+	};
 };
doc/device-tree-bindings/exynos/tmu.txt new file +41 -0

41 lines not on this page · raw message

include/fdtdec.h +1 -0
index 77f244f..b9301c8 100644
@@ -81,6 +81,7 @@ enum fdt_compat_id {
 	COMPAT_SAMSUNG_EXYNOS_EHCI,	/* Exynos EHCI controller */
 	COMPAT_SAMSUNG_EXYNOS_USB_PHY,	/* Exynos phy controller for usb2.0 */
 	COMPAT_MAXIM_MAX77686_PMIC,	/* MAX77686 PMIC */
+	COMPAT_SAMSUNG_EXYNOS_TMU,	/* Exynos TMU */
 
 	COMPAT_COUNT,
 };
lib/fdtdec.c +1 -0
index 3ae348d..5c427ff 100644
@@ -56,6 +56,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
 	COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
 	COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
+	COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)
Signature · 1 line
1.8.0
#3 lore raw

PATCH v11 3/8 Exynos5: TMU: Add TMU init and status check

In reply to Akshay Saraswat

This adds call to tmu_init() and TMU boot time analysis for the SoC temperature threshold breach.

---
Changes since v10:
- None.

 board/samsung/smdk5250/smdk5250.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
board/samsung/smdk5250/smdk5250.c +39 -0
index ffc5ee5..89247d9 100644
@@ -37,9 +37,39 @@
 #include <asm/arch/dp_info.h>
 #include <power/pmic.h>
 #include <power/max77686_pmic.h>
+#include <tmu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+	int temp;
+
+	switch (tmu_monitor(&temp)) {
+	/* Status TRIPPED ans WARNING means corresponding threshold breach */
+	case TMU_STATUS_TRIPPED:
+		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+		set_ps_hold_ctrl();
+		hang();
+		break;
+	case TMU_STATUS_WARNING:
+		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+		break;
+	/*
+	 * TMU_STATUS_INIT means something is wrong with temperature sensing
+	 * and TMU status was changed back from NORMAL to INIT.
+	 */
+	case TMU_STATUS_INIT:
+	default:
+		debug("EXYNOS_TMU: Unknown TMU state\n");
+	}
+}
+#endif
+
 #ifdef CONFIG_USB_EHCI_EXYNOS
 int board_usb_vbus_init(void)
 {
@@ -59,6 +89,15 @@ int board_usb_vbus_init(void)
 int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+		debug("%s: Failed to init TMU\n", __func__);
+		return -1;
+	}
+	boot_temp_check();
+#endif
+
 #ifdef CONFIG_EXYNOS_SPI
 	spi_init();
 #endif
Signature · 1 line
1.8.0
#4 lore raw

PATCH v11 4/8 Exynos5: Config: Enable support for Exynos TMU driver

In reply to Akshay Saraswat

Enables TMU driver support for exynos5250

---
Changes since v10:
- None.

 include/configs/exynos5250-dt.h | 3 +++
 1 file changed, 3 insertions(+)
include/configs/exynos5250-dt.h +3 -0
index cabd2f2..53ca41f 100644
@@ -117,6 +117,9 @@
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
+/* Thermal Management Unit */
+#define CONFIG_EXYNOS_TMU
+
 /* USB */
 #define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
Signature · 1 line
1.8.0
#5 lore raw

PATCH v11 5/8 TMU: Add TMU support in dtt command

In reply to Akshay Saraswat

Add generic TMU support alongwith i2c sensors in dtt command to enable temperature reading in cases where TMU is present along-with/instead-of i2c sensors.

---
Changes since v10:
- None.

 common/cmd_dtt.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)
common/cmd_dtt.c +31 -1
index cd94423..edbd4a8 100644
@@ -27,7 +27,9 @@
 
 #include <dtt.h>
 #include <i2c.h>
+#include <tmu.h>
 
+#if defined CONFIG_DTT_SENSORS
 static unsigned long sensor_initialized;
 
 static void _initialize_dtt(void)
@@ -59,9 +61,11 @@ void dtt_init(void)
 	/* switch back to original I2C bus */
 	I2C_SET_BUS(old_bus);
 }
+#endif
 
-int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+int dtt_i2c(void)
 {
+#if defined CONFIG_DTT_SENSORS
 	int i;
 	unsigned char sensors[] = CONFIG_DTT_SENSORS;
 	int old_bus;
@@ -83,8 +87,34 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 
 	/* switch back to original I2C bus */
 	I2C_SET_BUS(old_bus);
+#endif
 
 	return 0;
+}
+
+int dtt_tmu(void)
+{
+#if defined CONFIG_TMU_CMD_DTT
+	int cur_temp;
+
+	/* Sense and return latest thermal info */
+	if (tmu_monitor(&cur_temp) == TMU_STATUS_INIT) {
+		puts("TMU is in unknown state, temperature is invalid\n");
+		return -1;
+	}
+	printf("Current temperature: %u degrees Celsius\n", cur_temp);
+#endif
+	return 0;
+}
+
+int do_dtt(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	int err = 0;
+
+	err |= dtt_i2c();
+	err |= dtt_tmu();
+
+	return err;
 }	/* do_dtt() */
 
 /***************************************************/
Signature · 1 line
1.8.0
#6 lore raw

PATCH v11 6/8 Exynos5: Config: Enable dtt command for TMU

In reply to Akshay Saraswat

This enables the dtt command to read the current SOC temperature with the help of TMU

---
Changes since v10:
- None.

 include/configs/exynos5250-dt.h | 2 ++
 1 file changed, 2 insertions(+)
include/configs/exynos5250-dt.h +2 -0
index 53ca41f..8a8e9fe 100644
@@ -119,6 +119,8 @@
 
 /* Thermal Management Unit */
 #define CONFIG_EXYNOS_TMU
+#define CONFIG_CMD_DTT
+#define CONFIG_TMU_CMD_DTT
 
 /* USB */
 #define CONFIG_CMD_USB
Signature · 1 line
1.8.0
#7 lore raw

PATCH v11 7/8 Exynos5: TMU: Add hardware tripping

In reply to Akshay Saraswat

This adds hardware tripping at 110 degrees celsius which must enable forced system shutdown in case TMU fails to power off.

---
Changes since v10:
- None.

 arch/arm/cpu/armv7/exynos/power.c        | 12 ++++++++++++
 arch/arm/include/asm/arch-exynos/power.h |  4 ++++
 drivers/power/exynos-tmu.c               | 25 ++++++++++++++++++++-----
 3 files changed, 36 insertions(+), 5 deletions(-)
arch/arm/cpu/armv7/exynos/power.c +12 -0
index 400c8bc..363c20a 100644
@@ -111,3 +111,15 @@ void set_ps_hold_ctrl(void)
 	if (cpu_is_exynos5())
 		exynos5_set_ps_hold_ctrl();
 }
+
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void)
+{
+	if (cpu_is_exynos5()) {
+		struct exynos5_power *power =
+			(struct exynos5_power *)samsung_get_base_power();
+
+		/* PS_HOLD_CONTROL register ENABLE_HW_TRIP bit*/
+		setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
+	}
+}
arch/arm/include/asm/arch-exynos/power.h +4 -0
index f2f73fa..e409b24 100644
@@ -857,6 +857,9 @@ void set_mipi_phy_ctrl(unsigned int dev_index, unsigned int enable);
 
 void set_usbhost_phy_ctrl(unsigned int enable);
 
+/* Enables hardware tripping to power off the system when TMU fails */
+void set_hw_thermal_trip(void);
+
 #define POWER_USB_HOST_PHY_CTRL_EN		(1 << 0)
 #define POWER_USB_HOST_PHY_CTRL_DISABLE		(0 << 0)
 
@@ -865,6 +868,7 @@ void set_dp_phy_ctrl(unsigned int enable);
 #define EXYNOS_DP_PHY_ENABLE		(1 << 0)
 
 #define EXYNOS_PS_HOLD_CONTROL_DATA_HIGH	(1 << 8)
+#define POWER_ENABLE_HW_TRIP			(1UL << 31)
 
 /*
  * Set ps_hold data driving value high
drivers/power/exynos-tmu.c +20 -5
index cc5ffee..f4fa9e1 100644
@@ -22,9 +22,11 @@
 #include <fdtdec.h>
 #include <tmu.h>
 #include <asm/arch/tmu.h>
+#include <asm/arch/power.h>
 
 #define TRIMINFO_RELOAD		1
 #define CORE_EN			1
+#define THERM_TRIP_EN		(1 << 12)
 
 #define INTEN_RISE0		1
 #define INTEN_RISE1		(1 << 4)
@@ -55,6 +57,8 @@ struct temperature_params {
 	unsigned int start_warning;
 	/* temperature threshold CPU tripping */
 	unsigned int start_tripping;
+	/* temperature threshold for HW tripping */
+	unsigned int hardware_tripping;
 };
 
 /* Pre-defined values and thresholds for calibration of current temperature */
@@ -196,6 +200,9 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 	info->data.ts.start_tripping = fdtdec_get_int(blob,
 				node, "samsung,start-tripping", -1);
 	error |= info->data.ts.start_tripping;
+	info->data.ts.hardware_tripping = fdtdec_get_int(blob,
+				node, "samsung,hw-tripping", -1);
+	error |= info->data.ts.hardware_tripping;
 	info->data.efuse_min_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-min-value", -1);
 	error |= info->data.efuse_min_value;
@@ -230,7 +237,7 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 static void tmu_setup_parameters(struct tmu_info *info)
 {
 	unsigned int te_code, con;
-	unsigned int warning_code, trip_code;
+	unsigned int warning_code, trip_code, hwtrip_code;
 	unsigned int cooling_temp;
 	unsigned int rising_value;
 	struct tmu_data *data = &info->data;
@@ -254,9 +261,14 @@ static void tmu_setup_parameters(struct tmu_info *info)
 			+ info->te1 - info->dc_value;
 	trip_code = data->ts.start_tripping
 			+ info->te1 - info->dc_value;
+	hwtrip_code = data->ts.hardware_tripping
+			+ info->te1 - info->dc_value;
+
 	cooling_temp = 0;
 
-	rising_value = ((warning_code << 8) | (trip_code << 16));
+	rising_value = ((warning_code << 8) |
+			(trip_code << 16) |
+			(hwtrip_code << 24));
 
 	/* Set interrupt level */
 	writel(rising_value, &reg->threshold_temp_rise);
@@ -276,12 +288,15 @@ static void tmu_setup_parameters(struct tmu_info *info)
 
 	/* TMU core enable */
 	con = readl(&reg->tmu_control);
-	con |= CORE_EN;
+	con |= THERM_TRIP_EN | CORE_EN;
 
 	writel(con, &reg->tmu_control);
 
-	/* LEV0 LEV1 LEV2 interrupt enable */
-	writel(INTEN_RISE0 | INTEN_RISE1 | INTEN_RISE2,	&reg->inten);
+	/* Enable HW thermal trip */
+	set_hw_thermal_trip();
+
+	/* LEV1 LEV2 interrupt enable */
+	writel(INTEN_RISE1 | INTEN_RISE2, &reg->inten);
 }
 
 /*
Signature · 1 line
1.8.0
#8 lore raw

PATCH v11 8/8 Exynos5: FDT: Add a H/W-trip member to TMU node

In reply to Akshay Saraswat

This adds a member to TMU FDT node for providing hardware tripping temperature threshold.

---
Changes since v10:
- None.

 board/samsung/dts/exynos5250-smdk5250.dts | 1 +
 doc/device-tree-bindings/exynos/tmu.txt   | 5 ++++-
 2 files changed, 5 insertions(+), 1 deletion(-)
board/samsung/dts/exynos5250-smdk5250.dts +1 -0
index 00dac40..1c2d52d 100644
@@ -72,6 +72,7 @@
 		samsung,max-temp	= <125>;
 		samsung,start-warning	= <95>;
 		samsung,start-tripping	= <105>;
+		samsung,hw-tripping	= <110>;
 		samsung,efuse-min-value	= <40>;
 		samsung,efuse-value	= <55>;
 		samsung,efuse-max-value	= <100>;
doc/device-tree-bindings/exynos/tmu.txt +4 -1
index bb734dc..89d3bf0 100644
@@ -8,7 +8,9 @@ Required properties:
  - samsung,max-temp : Maximum temperature value (125 degree celsius)
 	- Current temperature of SoC should be less than this value.
  - samsung,start-warning : Temperature at which TMU starts giving warning (degree celsius)
- - samsung,start-tripping : Temperature at which system will trip and shutdown (degree celsius)
+ - samsung,start-tripping : Temperature at which TMU shuts down the system (degree celsius)
+ - samsung,hw-tripping : Temperature at which hardware tripping should happen
+	in case TMU fails to power off (degree celsius)
  - samsung,efuse-min-value : SOC efuse min value (Constant 40)
 	- efuse-value should be more than this value.
  - samsung,efuse-value : SOC actual efuse value (Literal value)
@@ -33,6 +35,7 @@ tmu at 10060000 {
 	samsung,max-temp = <125>;
 	samsung,start-warning = <95>;
 	samsung,start-tripping = <105>;
+	samsung,hw-tripping = <110>;
 	samsung,efuse-min-value = <40>;
 	samsung,efuse-value = <55>;
 	samsung,efuse-max-value = <100>;
Signature · 1 line
1.8.0
#9 lore raw

v11 cover Add TMU support for Exynos5250 based SMDK5250

In reply to Akshay Saraswat
Quoted 34 lines · Akshay Saraswat

This patch series adds support for TMU driver using device tree for Exynos5250 based SMDK5250 board.

Changes since v10:
- Patch-1: Renamed asm/arch/exynos-tmu.h to asm/arch/tmu.h.
- Patch-2: None.
- Patch-3: None.
- Patch-4: None.
- Patch-5: None.
- Patch-6: None.
- Patch-7: None.
- Patch-8: None.

Akshay Saraswat (8):
Exynos5: TMU: Add driver for Thermal Management Unit
Exynos5: FDT: Add TMU device node values
Exynos5: TMU: Add TMU init and status check
Exynos5: Config: Enable support for Exynos TMU driver
TMU: Add TMU support in dtt command
Exynos5: Config: Enable dtt command for TMU
Exynos5: TMU: Add hardware tripping
Exynos5: FDT: Add a H/W-trip member to TMU node

 arch/arm/cpu/armv7/exynos/power.c         |  12 ++
 arch/arm/dts/exynos5250.dtsi              |   5 +
 arch/arm/include/asm/arch-exynos/power.h  |   4 +
 arch/arm/include/asm/arch-exynos/tmu.h    |  58 ++++++
 board/samsung/dts/exynos5250-smdk5250.dts |  13 ++
 board/samsung/smdk5250/smdk5250.c         |  39 ++++
 common/cmd_dtt.c                          |  32 ++-
 doc/device-tree-bindings/exynos/tmu.txt   |  44 +++++
 drivers/power/Makefile                    |   1 +
 drivers/power/exynos-tmu.c                | 319 ++++++++++++++++++++++++++++++
 include/configs/exynos5250-dt.h           |   5 +
Quoted 9 lines
 include/fdtdec.h                          |   1 +
 include/tmu.h                             |  46 +++++
 lib/fdtdec.c                              |   1 +
 14 files changed, 579 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/arch-exynos/tmu.h
 create mode 100644 doc/device-tree-bindings/exynos/tmu.txt
 create mode 100644 drivers/power/exynos-tmu.c
 create mode 100644 include/tmu.h

applied to u-boot-samsung.

Thanks,
Minkyu Kang.