Skip to contentSkip to conversation

i.MX6 SabreSD and SabreAUTO bmode support

PATCH Superseded Otavio Salvador 2 participants 6 messages Mar 6, 2013 – Mar 13, 2013

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover i.MX6 SabreSD and SabreAUTO bmode support

This adds the bmode support for i.MX6 SabreSD and SabreAUTO boards. This allows user to choose the boot mode at runtime making it easy to boot from USB or other media.

Changes in v3:
- Drop change in bootdelay; the change where done by me while testing it and I mistakenly included it.

Changes in v2:
- Rework code to use a 'ret' variable (Fabio)
- Improve commit log

Otavio Salvador (3):
mx6qsabresd: Fix card detection for invalid card id case
mx6qsabresd: Document the mapping of USDHC[2-4] mx6qsabre{sd,auto}: Add boot mode select

 board/freescale/mx6qsabreauto/mx6qsabreauto.c | 17 +++++++++++++
 board/freescale/mx6qsabresd/mx6qsabresd.c     | 35 ++++++++++++++++++++++++---
 include/configs/mx6qsabre_common.h            |  2 ++
 3 files changed, 50 insertions(+), 4 deletions(-)
Signature · 1 line
1.8.1
#1 lore raw

PATCH v3 1/3 mx6qsabresd: Fix card detection for invalid card id case

This changes the code so in case an unkown value is passed it will return as invalid.

---
Changes in v3: None
Changes in v2:
- Rework code to use a 'ret' variable (Fabio)

 board/freescale/mx6qsabresd/mx6qsabresd.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
board/freescale/mx6qsabresd/mx6qsabresd.c +7 -4
index 65c4a1a..e556476 100644
@@ -145,15 +145,18 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = {
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
 
 	switch (cfg->esdhc_base) {
 	case USDHC2_BASE_ADDR:
-		return !gpio_get_value(USDHC2_CD_GPIO);
+		ret = !gpio_get_value(USDHC2_CD_GPIO);
 	case USDHC3_BASE_ADDR:
-		return !gpio_get_value(USDHC3_CD_GPIO);
-	default:
-		return 1; /* eMMC/uSDHC4 is always present */
+		ret = !gpio_get_value(USDHC3_CD_GPIO);
+	case USDHC4_BASE_ADDR:
+		ret = 1; /* eMMC/uSDHC4 is always present */
 	}
+
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)
Signature · 1 line
1.8.1
#2 lore raw

PATCH v3 1/3 mx6qsabresd: Fix card detection for invalid card id case

Quoted 5 lines · Otavio Salvador

This changes the code so in case an unkown value is passed it will return as invalid.

---

Hi Otavio,

Quoted 12 lines

Changes in v3: None
Changes in v2:
- Rework code to use a 'ret' variable (Fabio)

 board/freescale/mx6qsabresd/mx6qsabresd.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
board/freescale/mx6qsabresd/mx6qsabresd.c +0 -0
index 65c4a1a..e556476 100644

board/freescale/mx6qsabresd/mx6qsabresd.c struct fsl_esdhc_cfg usdhc_cfg[3] = { · line 152

Quoted 9 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +2 -1
@@ -145,15 +145,18 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = {
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
 
 	switch (cfg->esdhc_base) {
 	case USDHC2_BASE_ADDR:
-		return !gpio_get_value(USDHC2_CD_GPIO);
+		ret = !gpio_get_value(USDHC2_CD_GPIO);

I do not understand. Is there no "break" statement here ? ret will be overwritten then.

Quoted 4 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +0 -2
 	case USDHC3_BASE_ADDR:
-		return !gpio_get_value(USDHC3_CD_GPIO);
-	default:

board/freescale/mx6qsabresd/mx6qsabresd.c struct fsl_esdhc_cfg usdhc_cfg[3] = { · line 162

Quoted 10 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +5 -1
-		return 1; /* eMMC/uSDHC4 is always present */
+		ret = !gpio_get_value(USDHC3_CD_GPIO);
+	case USDHC4_BASE_ADDR:
+		ret = 1; /* eMMC/uSDHC4 is always present */
 	}
+
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH v3 1/3 mx6qsabresd: Fix card detection for invalid card id case

Quoted 26 lines · Stefano Babic
Quoted 5 lines · Otavio Salvador

This changes the code so in case an unkown value is passed it will return as invalid.

---

Hi Otavio,

Quoted 17 lines

Changes in v3: None
Changes in v2:
- Rework code to use a 'ret' variable (Fabio)

 board/freescale/mx6qsabresd/mx6qsabresd.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
board/freescale/mx6qsabresd/mx6qsabresd.c +1 -0
index 65c4a1a..e556476 100644
@@ -145,15 +145,18 @@ struct fsl_esdhc_cfg usdhc_cfg[3] = {
 int board_mmc_getcd(struct mmc *mmc)
 {
      struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+     int ret = 0;
 
Quoted 7 lines

board/freescale/mx6qsabresd/mx6qsabresd.c struct fsl_esdhc_cfg usdhc_cfg[3] = { · line 152

Quoted 4 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +1 -1
      switch (cfg->esdhc_base) {
      case USDHC2_BASE_ADDR:
-             return !gpio_get_value(USDHC2_CD_GPIO);
+             ret = !gpio_get_value(USDHC2_CD_GPIO);

I do not understand. Is there no "break" statement here ? ret will be overwritten then.

Good catch and this will indeed fail. I did the change when Fabio asked but did not test it. I will rework it and test, before sending new version of patchset.

Quoted 24 lines
Quoted 4 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +0 -2
      case USDHC3_BASE_ADDR:
-             return !gpio_get_value(USDHC3_CD_GPIO);
-     default:

board/freescale/mx6qsabresd/mx6qsabresd.c struct fsl_esdhc_cfg usdhc_cfg[3] = { · line 162

Quoted 10 lines
board/freescale/mx6qsabresd/mx6qsabresd.c +5 -1
-             return 1; /* eMMC/uSDHC4 is always present */
+             ret = !gpio_get_value(USDHC3_CD_GPIO);
+     case USDHC4_BASE_ADDR:
+             ret = 1; /* eMMC/uSDHC4 is always present */
      }
+
+     return ret;
 }
 
 int board_mmc_init(bd_t *bis)

Best regards,
Stefano Babic

--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

Signature · 3 lines
Otavio Salvador                             O.S. Systems
E-mail: otavio at ossystems.com.br  http://www.ossystems.com.br
Mobile: +55 53 9981-7854              http://projetos.ossystems.com.br
#4 lore raw

PATCH v3 2/3 mx6qsabresd: Document the mapping of USDHC[2-4]

In reply to Otavio Salvador

This documents the SD card identifier so it is easier for user to spot which card number will be used, if need.

---
Changes in v3: None
Changes in v2:
- Improve commit log

 board/freescale/mx6qsabresd/mx6qsabresd.c | 4 ++++
 1 file changed, 4 insertions(+)
board/freescale/mx6qsabresd/mx6qsabresd.c +4 -0
index e556476..3fe8bb6 100644
@@ -26,6 +26,7 @@
 #include <asm/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <miiphy.h>
@@ -165,18 +166,21 @@ int board_mmc_init(bd_t *bis)
 
 	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
 		switch (i) {
+		/* SD2 - mmc0 */
 		case 0:
 			imx_iomux_v3_setup_multiple_pads(
 				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
 			gpio_direction_input(USDHC2_CD_GPIO);
 			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 			break;
+		/* SD3 - mmc1 */
 		case 1:
 			imx_iomux_v3_setup_multiple_pads(
 				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
 			gpio_direction_input(USDHC3_CD_GPIO);
 			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 			break;
+		/* eMMC - mmc2 */
 		case 2:
 			imx_iomux_v3_setup_multiple_pads(
 				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
Signature · 1 line
1.8.1
#5 lore raw

PATCH v3 3/3 mx6qsabre{sd,auto}: Add boot mode select

In reply to Otavio Salvador

Adds support for 'bmode' command which let user to choose where to boot from; this allows U-Boot to load system from another storage without messing with jumpers.

---
Changes in v3:
- Drop change in bootdelay; the change where done by me while testing it and I mistakenly included it.

Changes in v2: None

 board/freescale/mx6qsabreauto/mx6qsabreauto.c | 17 +++++++++++++++++
 board/freescale/mx6qsabresd/mx6qsabresd.c     | 20 ++++++++++++++++++++
 include/configs/mx6qsabre_common.h            |  2 ++
 3 files changed, 39 insertions(+)
board/freescale/mx6qsabreauto/mx6qsabreauto.c +17 -0
index 9e3700e..9650563 100644
@@ -216,6 +216,23 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	{NULL,   0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
 int checkboard(void)
 {
 	int rev = mx6sabre_rev();
board/freescale/mx6qsabresd/mx6qsabresd.c +20 -0
index 3fe8bb6..02f2924 100644
@@ -266,6 +266,26 @@ int board_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	/* 8 bit bus width */
+	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,	 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+	add_board_boot_modes(board_boot_modes);
+#endif
+
+	return 0;
+}
+
 int checkboard(void)
 {
 	puts("Board: MX6Q-SabreSD\n");
include/configs/mx6qsabre_common.h +2 -0
index f7e8779..63e73a7 100644
@@ -33,6 +33,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -72,6 +73,7 @@
 /* Command definition */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BMODE
 #define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
Signature · 1 line
1.8.1