Skip to contentSkip to conversation

TFTP pause and timeout on MX28 platforms

U-Boot Hector Palacios 3 participants 12 messages Mar 13, 2013 – Mar 14, 2013

lore
Share & tools
lore
#0 lore raw

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Signature · 1 line
H?ctor Palacios
#1 lore raw

Dear Hector Palacios,

Quoted 13 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000
Quoted 8 lines

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

What version of u-boot do you use ? It was resolved in recent versions.

Best regards,
Marek Vasut

#2 lore raw

Dear Marek Vasut,

Quoted 17 lines · Marek Vasut

Dear Hector Palacios,

Quoted 15 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

Quoted 8 lines
Quoted 6 lines

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it?
The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.
Thank you,

Signature · 1 line
H?ctor Palacios
#3 lore raw

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 6 lines
Quoted 1 line

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

Quoted 1 line

Thank you,

Best regards,
Marek Vasut

#4 lore raw

Dear Marek Vasut,

Quoted 36 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 6 lines
Quoted 1 line

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.
My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

      #################################################################
      #####################################################T T T T T T

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Signature · 1 line
H?ctor Palacios
#5 lore raw

Dear Hector Palacios,

Quoted 48 lines

Dear Marek Vasut,

Quoted 36 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 6 lines
Quoted 1 line

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

Quoted 8 lines

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.
My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

      #################################################################
      #####################################################T T T T T T

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your transceiver mode is not misconfigured. Moreover, see board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?

Best regards,
Marek Vasut

#6 lore raw

Dear Marek Vasut,

Quoted 56 lines · Marek Vasut

Dear Hector Palacios,

Quoted 54 lines

Dear Marek Vasut,

Quoted 36 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 6 lines
Quoted 1 line

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.
My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

       #################################################################
       #####################################################T T T T T T
Quoted 7 lines
Quoted 2 lines

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your transceiver mode is not misconfigured. Moreover, see board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?

No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a different PHY: SMSC LAN8720a).

Are you able to download a 50MiB file via TFTP several times without any problem on m28evk?

Best regards,

Signature · 1 line
H?ctor Palacios
#7 lore raw

Dear Hector Palacios,

Quoted 70 lines

Dear Marek Vasut,

Quoted 58 lines · Marek Vasut

Dear Hector Palacios,

Quoted 56 lines

Dear Marek Vasut,

Quoted 37 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 7 lines
Quoted 2 lines

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.

My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

       #################################################################
       #####################################################T T T T T T
Quoted 8 lines
Quoted 2 lines

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your transceiver mode is not misconfigured. Moreover, see board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?

Quoted 7 lines

No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a different PHY: SMSC LAN8720a).

Are you able to download a 50MiB file via TFTP several times without any problem on m28evk?

Yes.

btw. the original TFTP had size limit of 32MB, aren't you hitting this?

Best regards,
Marek Vasut

#8 lore raw

Dear Marek Vasut,

Quoted 77 lines · Marek Vasut

Dear Hector Palacios,

Quoted 75 lines

Dear Marek Vasut,

Quoted 58 lines · Marek Vasut

Dear Hector Palacios,

Quoted 56 lines

Dear Marek Vasut,

Quoted 37 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't.
On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK.
The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 7 lines
Quoted 2 lines

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.

My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

        #################################################################
        #####################################################T T T T T T
Quoted 8 lines
Quoted 2 lines

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your transceiver mode is not misconfigured. Moreover, see board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?

No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a different PHY: SMSC LAN8720a).

Quoted 4 lines
Quoted 2 lines

Are you able to download a 50MiB file via TFTP several times without any problem on m28evk?

Yes.

Interesting. What PHY does m28evk platform have? I was thinking on a problem of the fec driver given that it can be reproduced in the mx28evk and in my platform, with different PHYs, but if it is not reproducible in m28evk I'll need to recheck the platform code.

Quoted 1 line

btw. the original TFTP had size limit of 32MB, aren't you hitting this?

No it's not a server problem. I can sometimes transfer bigger files without problems. Other times it just pauses and/or timeouts after 3 or 4MiB.

Thank you

Signature · 1 line
H?ctor Palacios
#9 lore raw

Dear Hector Palacios,

Quoted 84 lines

Dear Marek Vasut,

Quoted 81 lines · Marek Vasut

Dear Hector Palacios,

Quoted 78 lines

Dear Marek Vasut,

Quoted 59 lines · Marek Vasut

Dear Hector Palacios,

Quoted 57 lines

Dear Marek Vasut,

Quoted 37 lines · Marek Vasut

Dear Hector Palacios,

Quoted 27 lines

Dear Marek Vasut,

Quoted 24 lines · Marek Vasut

Dear Hector Palacios,

Quoted 21 lines

Hello,

When doing large TFTP downloads (files bigger than 10MiB) on my MX28 platform I'm sometimes experiencing pauses and timeouts. U-Boot will eventually restart the transmission and sometimes may successfully complete the download, but other times it won't. On my platform it was somewhat mitigated (but not resolved) by reverting this patch from Marek:

commit 67449098a86be18cbdb27345bebe8da57e5d8899

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:50 2012 +0000

FEC: Rework the TX wait mechanism

The problem is reproducible in Freescale's MX28EVK. The larger the file, the more chances to see the problem. Please try with 50MiB files or larger. Has anybody else seen it?

On an old U-Boot v2009 TFTP transmission was twice slower than with v2013, but didn't suffer from this.

Quoted 7 lines
Quoted 2 lines

What version of u-boot do you use ? It was resolved in recent versions.

I'm using v2013.01.
Could you please point me to the commit(s) that solve it? The commits I see on drivers/net/fec_mxc.c after v2013.01 are from Troy Kisky and don't seem to address this.

Quoted 8 lines

commit c0b5a3bbb0cd40a6b23b7b07e2182a5bcdc8c31c

Author: Marek Vasut <[email protected]>
Date:   Wed Aug 29 03:49:51 2012 +0000

FEC: Replace magic contants

and the three before this one. Is your PHY operating correctly? This fixed the hangs on multiple MX28 platforms for me.

v2013.01 contains all these patches but I was able to reproduce this both on my platform and on the mx28evk.

My problem is not a hang, but TFTP pauses (1 to 3 seconds) and timeouts:

        ##############################################################
        ### #####################################################T T T
        T T T
Quoted 8 lines
Quoted 2 lines

At first I thought it was my platform's PHY (Micrel KSZ8031) but I also see it on mx28evk.

Do you use PHYLIB (see configs/sc_sps_1.h for example)? Also check if your transceiver mode is not misconfigured. Moreover, see board/denx/m28evk/spl_boot.c fecmxc_mii_postcall(), maybe you also need to program some registers of the PHY (V11 and V10 prototypes used KSZ8051)?

No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a different PHY: SMSC LAN8720a).

Are you able to download a 50MiB file via TFTP several times without any problem on m28evk?

Quoted 6 lines
Quoted 1 line

Yes.

Interesting. What PHY does m28evk platform have? I was thinking on a problem of the fec driver given that it can be reproduced in the mx28evk and in my platform, with different PHYs, but if it is not reproducible in m28evk I'll need to recheck the platform code.

KSZ8021 I think. Did Fabio not verify the code works on his MX28EVK ?

Quoted 6 lines
Quoted 1 line

btw. the original TFTP had size limit of 32MB, aren't you hitting this?

No it's not a server problem. I can sometimes transfer bigger files without problems. Other times it just pauses and/or timeouts after 3 or 4MiB.

Thank you

Best regards,
Marek Vasut

#10 lore raw
Quoted 6 lines · Marek Vasut
Quoted 4 lines

Interesting. What PHY does m28evk platform have? I was thinking on a problem of the fec driver given that it can be reproduced in the mx28evk and in my platform, with different PHYs, but if it is not reproducible in m28evk I'll need to recheck the platform code.

KSZ8021 I think. Did Fabio not verify the code works on his MX28EVK ?

After reading this thread, I tested yesterday a 50MB tftp transfer on mx28evk and I do see around two or three pauses/timeouts during the transfer.

#11 lore raw
In reply to Hector Palacios
Quoted 4 lines · Hector Palacios

No I don't use PHYLIB. My platform is based on Freescale's mx28evk (not DENX's m28evk). I saw fecmxc_mii_postcall() and I do a similar thing because of my phy model KSZ8031, but as I said the pauses and timeouts occur in both platforms (mx28evk uses a different PHY: SMSC LAN8720a).

Just tried adding:

#define CONFIG_PHYLIB
#define CONFIG_PHY_SMSC

but LAN8270 is not getting detected.

CPU:   Freescale i.MX28 rev1.2 at 454 MHz
BOOT:  SSP SD/MMC #0, 3V3
I2C:   ready
DRAM:  128 MiB
MMC:   MXS MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   Phy not found

FEC0 [PRIME], FEC1
Hit any key to stop autoboot: 0
MX28EVK U-Boot >

I tried a 50MB tftp transfer here on mx28evk and I do see like 2 or 3 pauses during the transfer.