Skip to contentSkip to conversation

ARM: dove: add more hardware description in the DT

PATCH Superseded Jean-Francois Moine 2 participants 2 messages Mar 25, 2013 Device tree bindings

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: dove: add more hardware description in the DT

The 88AP510 chip (Marvell Dove) contains a LCD controller, a display controller and two audio controllers.

---
v2 from Sebastian Hesselbarth remarks
- better names for the devices
- fix bad i2s interrupt controller
- 2 irq's by audio controller
- display controller added

---
 arch/arm/boot/dts/dove.dtsi |   38 +++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
arch/arm/boot/dts/dove.dtsi +38 -0
index f7509ca..4f5cfbf 100644
@@ -253,5 +253,43 @@
 				dmacap,xor;
 			};
 		};
+
+		lcd0: lcd-controller at 820000 {
+			compatible = "marvell,dove-lcd";
+			reg = <0x820000 0x1c8>;
+			interrupts = <47>;
+			status = "disabled";
+		};
+
+		lcd1: lcd-controller at 810000 {
+			compatible = "marvell,dove-lcd";
+			reg = <0x810000 0x1c8>;
+			interrupts = <46>;
+			status = "disabled";
+		};
+
+		i2s0: audio-controller at b0000 {
+			compatible = "marvell,kirkwood-i2s";
+			reg = <0xb0000 0x4000>;
+			interrupts = <19>, <20>;
+			clocks = <&gate_clk 12>;
+			status = "disabled";
+		};
+
+		i2s1: audio-controller at b4000 {
+			compatible = "marvell,kirkwood-i2s";
+			reg = <0xb4000 0x4000>;
+			interrupts = <21>, <22>;
+			clocks = <&gate_clk 13>;
+			status = "disabled";
+		};
+
+		/* display controller and image rotation engine */
+		dcon: display-controller at 830000 {
+			compatible = "marvell,dove-dcon";
+			reg = <0x830000 0xc8>, <0x831000 0x8c>;
+			interrupts = <45>;
+			status = "disabled";
+		};
 	};
 };
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH v2 1/1 ARM: dove: add more hardware description in the DT

Quoted 47 lines · Jean-Francois Moine

The 88AP510 chip (Marvell Dove) contains a LCD controller, a display controller and two audio controllers.

---
v2 from Sebastian Hesselbarth remarks
- better names for the devices
- fix bad i2s interrupt controller
- 2 irq's by audio controller
- display controller added

---
  arch/arm/boot/dts/dove.dtsi |   38 +++++++++++++++++++++++++++++++
  1 file changed, 38 insertions(+)
arch/arm/boot/dts/dove.dtsi +25 -0
index f7509ca..4f5cfbf 100644
@@ -253,5 +253,43 @@
  				dmacap,xor;
  			};
  		};
+
+		lcd0: lcd-controller at 820000 {
+			compatible = "marvell,dove-lcd";
+			reg =<0x820000 0x1c8>;
+			interrupts =<47>;
+			status = "disabled";
+		};
+
+		lcd1: lcd-controller at 810000 {
+			compatible = "marvell,dove-lcd";
+			reg =<0x810000 0x1c8>;
+			interrupts =<46>;
+			status = "disabled";
+		};
+
+		i2s0: audio-controller at b0000 {
+			compatible = "marvell,kirkwood-i2s";
+			reg =<0xb0000 0x4000>;
+			interrupts =<19>,<20>;
+			clocks =<&gate_clk 12>;
+			status = "disabled";
+		};
+
+		i2s1: audio-controller at b4000 {
+			compatible = "marvell,kirkwood-i2s";

arch/arm/boot/dts/dove.dtsi line 290

Quoted 10 lines
arch/arm/boot/dts/dove.dtsi +10 -0
+			reg =<0xb4000 0x4000>;
+			interrupts =<21>,<22>;
+			clocks =<&gate_clk 13>;
+			status = "disabled";
+		};
+
+		/* display controller and image rotation engine */
+		dcon: display-controller at 830000 {
+			compatible = "marvell,dove-dcon";
+			reg =<0x830000 0xc8>,<0x831000 0x8c>;

nit: first dcon register block ends at 0xc4 not 0xc8

Otherwise,

Quoted 5 lines
arch/arm/boot/dts/dove.dtsi +3 -0
+			interrupts =<45>;
+			status = "disabled";
+		};
  	};
  };