Skip to contentSkip to conversation

mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices

PATCH New Jagannadha Sutradharudu Teki 2 participants 2 messages Mar 1, 2013 – Apr 2, 2013 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices

This patch addjusted the write buffer size for M29EW devices those are operated in 8-bit mode.

The M29EW devices seem to report the CFI information wrong when it's in 8 bit mode.

There's an app note from Numonyx on this issue and there's a patch in the open source as well for Linux, but it doesn't seem to be in mainline.

---
 drivers/mtd/cfi_flash.c |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
drivers/mtd/cfi_flash.c +23 -0
index 6b9fc1a..328c76d 100644
@@ -2053,6 +2053,26 @@ static void flash_fixup_sst(flash_info_t *info, struct cfi_qry *qry)
 	}
 }
 
+static void flash_fixup_num(flash_info_t *info, struct cfi_qry *qry)
+{
+	/*
+	 * The M29EW devices seem to report the CFI information wrong
+	 * when it's in 8 bit mode.
+	 * There's an app note from Numonyx on this issue.
+	 * So adjust the buffer size for M29EW while operating in 8-bit mode
+	 */
+	if (((qry->max_buf_write_size) > 0x8) &&
+			(info->device_id == 0x7E) &&
+			(info->device_id2 == 0x2201 ||
+			info->device_id2 == 0x2301 ||
+			info->device_id2 == 0x2801 ||
+			info->device_id2 == 0x4801)) {
+		debug("Adjusted buffer size on Numonyx flash"
+			" M29EW family in 8 bit mode\n");
+		qry->max_buf_write_size = 0x8;
+	}
+}
+
 /*
  * The following code cannot be run from FLASH!
  *
@@ -2135,6 +2155,9 @@ ulong flash_get_size (phys_addr_t base, int banknum)
 		case 0x00bf: /* SST */
 			flash_fixup_sst(info, &qry);
 			break;
+		case 0x0089: /* Numonyx */
+			flash_fixup_num(info, &qry);
+			break;
 		}
 
 		debug ("manufacturer is %d\n", info->vendor);
Signature · 1 line
1.7.4
#1 lore raw

PATCH 1/1 mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices

Quoted 11 lines · Jagannadha Sutradharudu Teki

This patch addjusted the write buffer size for M29EW devices those are operated in 8-bit mode.

The M29EW devices seem to report the CFI information wrong when it's in 8 bit mode.

There's an app note from Numonyx on this issue and there's a patch in the open source as well for Linux, but it doesn't seem to be in mainline.

Applied to u-boot-cfi-flash/master.

Thanks,
Stefan