Skip to contentSkip to conversation

mx6qsabrelite: README: No need to pass 'u-boot.imx'

PATCH New Fabio Estevam 2 participants 2 messages Mar 20, 2013 – Apr 3, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx6qsabrelite: README: No need to pass 'u-boot.imx'

From: Fabio Estevam <[email protected]>

The u-boot.imx binary is generated by default, so no need to pass it in the 'make' line.

---
 board/freescale/mx6qsabrelite/README |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/freescale/mx6qsabrelite/README +1 -1
index 6f2f534..7458ff3 100644
@@ -63,7 +63,7 @@ https://wiki.linaro.org/Boards/MX6QSabreLite
 To build U-Boot for the SabreLite board:
 
  make mx6qsabrelite_config
- make u-boot.imx
+ make
 
 To copy the resulting u-boot.imx to the SD card:
 
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 mx6qsabrelite: README: No need to pass 'u-boot.imx'

Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

The u-boot.imx binary is generated by default, so no need to pass it in the 'make' line.

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================