ARM: omap2: twl-common: Add default power configuration
Subsystems (3)
PATCH v3 1/1 ARM: omap2: twl-common: Add default power configuration
From: Matthias Brugger <[email protected]>
This patch adds a generic power script configuration. When rebooting an OMAP3530 at 125 MHz, the reboot hangs. With the generic power script, TWL4030 will be reset when a warm reset occures. This way the OMAP3530 does not hang on reboot.
---
Tony, Matthias,
Changes since v2:
- remove the __initdata from all the structures introduced by this patch
Regards,
Peter
arch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 1 + 2 files changed, 39 insertions(+)
arch/arm/mach-omap2/twl-common.c +38 -0
@@ -121,6 +121,41 @@ static struct twl4030_audio_data omap3_audio_pdata = { .codec = &omap3_codec, }; +static struct twl4030_ins wrst_seq[]__initdata = { + {MSG_SINGULAR (DEV_GRP_NULL ,0x1b ,RES_STATE_OFF ),2 }, + {MSG_SINGULAR (DEV_GRP_P1 ,0xf ,RES_STATE_WRST ),15 }, + {MSG_SINGULAR (DEV_GRP_P1 ,0x10 ,RES_STATE_WRST ),15 }, + {MSG_SINGULAR (DEV_GRP_P1 ,0x7 ,RES_STATE_WRST ),0x60 }, + {MSG_SINGULAR (DEV_GRP_P1 ,0x19 ,RES_STATE_ACTIVE ),2 }, + {MSG_SINGULAR (DEV_GRP_NULL ,0x1b ,RES_STATE_ACTIVE ),2 }, +}; + +static struct twl4030_script wrst_script__initdata = { + .script = wrst_seq, + .size =ARRAY_SIZE (wrst_seq), + .flags =TWL4030_WRST_SCRIPT , +}; + +static struct twl4030_script *omap3_power_scripts[]__initdata = { + &wrst_script, +}; + +static struct twl4030_resconfig omap3_rconfig[]__initdata = { + { .resource =RES_HFCLKOUT , .devgroup =DEV_GRP_P3 , .type =-1 , + .type2 =-1 }, + { .resource =RES_VDD1 , .devgroup =DEV_GRP_P1 , .type =-1 , + .type2 =-1 }, + { .resource =RES_VDD2 , .devgroup =DEV_GRP_P1 , .type =-1 , + .type2 =-1 }, + {0 ,0 }, +}; + +static struct twl4030_power_data omap3_power_pdata__initdata = { + .scripts = omap3_power_scripts, + .num =ARRAY_SIZE (omap3_power_scripts), + .resource_config = omap3_rconfig, +}; +static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {REGULATOR_SUPPLY ("vdda_dac" ,"omapdss_venc" ), };
@@ -225,6 +260,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,if (pdata_flags &TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) pmic_data->audio = &omap3_audio_pdata; +if (pdata_flags &TWL_COMMON_PDATA_POWER && !pmic_data->power) + pmic_data->power = &omap3_power_pdata; +/* Common regulator configurations */ if (regulators_flags &TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) pmic_data->vdac = &omap3_vdac_idata;
arch/arm/mach-omap2/twl-common.h +1 -0
@@ -7,6 +7,7 @@#define TWL_COMMON_PDATA_BCI (1 << 1)#define TWL_COMMON_PDATA_MADC (1 << 2)#define TWL_COMMON_PDATA_AUDIO (1 << 3) +#define TWL_COMMON_PDATA_POWER (1 << 4)/* Common LDO regulators for TWL4030/TWL6030 */ #define TWL_COMMON_REGULATOR_VDAC (1 << 0)
Signature · 1 line
1.8.1.5
PATCH v3 1/1 ARM: omap2: twl-common: Add default power configuration
Whata...
Quoted 28 lines · Peter Ujfalusi
From: Matthias Brugger <[email protected]>
This patch adds a generic power script configuration. When rebooting an OMAP3530 at 125 MHz, the reboot hangs. With the generic power script, TWL4030 will be reset when a warm reset occures. This way the OMAP3530 does not hang on reboot.
Signed-off-by Matthias Brugger <[email protected]>Signed-off-by Peter Ujfalusi <[email protected]>---
Tony, Matthias,Changes since v2:
- remove the__initdatafrom all the structures introduced by this patchRegards,
Peterarch/arm/mach-omap2/twl-common.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 1 + 2 files changed, 39 insertions(+)arch/arm/mach-omap2/twl-common.c +0
-0
arch/arm/mach-omap2/twl-common.c static struct twl4030_audio_data omap3_audio_pdata = { · line 124
Quoted 4 lines
arch/arm/mach-omap2/twl-common.c +1
-0@@ -121,6 +121,41 @@ static struct twl4030_audio_data omap3_audio_pdata = { .codec = &omap3_codec, }; +static struct twl4030_ins wrst_seq[]__initdata = {
The __initdata remained :o
Will resend it.
Quoted 60 lines
arch/arm/mach-omap2/twl-common.c +37
-0+ {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_OFF), 2}, + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_WRST), 15}, + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_WRST), 15}, + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_WRST), 0x60}, + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 2}, + {MSG_SINGULAR(DEV_GRP_NULL, 0x1b, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wrst_script__initdata = { + .script = wrst_seq, + .size =ARRAY_SIZE (wrst_seq), + .flags =TWL4030_WRST_SCRIPT , +}; + +static struct twl4030_script *omap3_power_scripts[]__initdata = { + &wrst_script, +}; + +static struct twl4030_resconfig omap3_rconfig[]__initdata = { + { .resource =RES_HFCLKOUT , .devgroup =DEV_GRP_P3 , .type =-1 , + .type2 =-1 }, + { .resource =RES_VDD1 , .devgroup =DEV_GRP_P1 , .type =-1 , + .type2 =-1 }, + { .resource =RES_VDD2 , .devgroup =DEV_GRP_P1 , .type =-1 , + .type2 =-1 }, + {0 ,0 }, +}; + +static struct twl4030_power_data omap3_power_pdata__initdata = { + .scripts = omap3_power_scripts, + .num =ARRAY_SIZE (omap3_power_scripts), + .resource_config = omap3_rconfig, +}; +static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = {REGULATOR_SUPPLY ("vdda_dac" ,"omapdss_venc" ), };@@ -225,6 +260,9 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,if (pdata_flags &TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) pmic_data->audio = &omap3_audio_pdata; +if (pdata_flags &TWL_COMMON_PDATA_POWER && !pmic_data->power) + pmic_data->power = &omap3_power_pdata; +/* Common regulator configurations */ if (regulators_flags &TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) pmic_data->vdac = &omap3_vdac_idata;arch/arm/mach-omap2/twl-common.h +1
-0@@ -7,6 +7,7 @@#define TWL_COMMON_PDATA_BCI (1 << 1)#define TWL_COMMON_PDATA_MADC (1 << 2)#define TWL_COMMON_PDATA_AUDIO (1 << 3) +#define TWL_COMMON_PDATA_POWER (1 << 4)/* Common LDO regulators for TWL4030/TWL6030 */ #define TWL_COMMON_REGULATOR_VDAC (1 << 0)
Signature · 1 line
P?ter