Tegra: All Tamonten-derived boards use onboard NAND
PATCH 1/4 Tegra: All Tamonten-derived boards use onboard NAND
Move the nand-controller node to the tegra20-tamonten.dtsi so that it can be shared between all derived boards.
--- board/avionic-design/dts/tegra20-tamonten.dtsi | 11 +++++++++++ board/avionic-design/dts/tegra20-tec.dts | 11 ----------- 2 files changed, 11 insertions(+), 11 deletions(-)
board/avionic-design/dts/tegra20-tamonten.dtsi +11 -0
@@ -279,6 +279,17 @@ status = "okay"; }; + nand-controller at 70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + + nand at 0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + i2c at 7000c000 { clock-frequency = <400000>; status = "okay";
board/avionic-design/dts/tegra20-tec.dts +0 -11
@@ -32,17 +32,6 @@ clock-frequency = <216000000>; }; - nand-controller at 70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - - nand at 0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; - i2c at 7000c000 { status = "disabled"; };
Signature · 1 line
1.8.2
PATCH 2/4 Tegra: Medcom-Wide: Enable NAND and boot script support
Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type.
--- include/configs/medcom-wide.h | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
include/configs/medcom-wide.h +12 -9
@@ -44,14 +44,21 @@#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT -#define CONFIG_ENV_IS_NOWHERE -/* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ +/* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA
@@ -66,13 +73,6 @@#define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_FIT - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "ext2load mmc 0 0x17000000 /boot/uImage;" \ - "bootm" -/* LCD support */ #define CONFIG_LCD #define CONFIG_PWM_TEGRA
@@ -80,6 +80,9 @@#define LCD_BPP LCD_COLOR16#define CONFIG_SYS_WHITE_ON_BLACK +/* support the new (FDT-based) image format */ +#define CONFIG_FIT +#include "tegra-common-post.h" #endif /* __CONFIG_H */
Signature · 1 line
1.8.2
PATCH 3/4 Tegra: Plutux: Enable NAND and boot script support
In reply to Thierry RedingBoot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type.
--- include/configs/plutux.h | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
include/configs/plutux.h +11 -7
@@ -42,8 +42,7 @@#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_BOARD_LATE_INIT /* SD/MMC */ #define CONFIG_MMC
@@ -51,6 +50,15 @@#define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, aligned to start of last sector */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K)/* 128K sectors */ +/* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA
@@ -65,13 +73,9 @@#define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* support the new (FDT-based) image format */ #define CONFIG_FIT -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "ext2load mmc 0 0x17000000 /boot/uImage;" \ - "bootm" -#include "tegra-common-post.h" #endif /* __CONFIG_H */
Signature · 1 line
1.8.2
PATCH 4/4 Tegra: TEC: Enable boot script support
In reply to Thierry RedingBoot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type.
--- include/configs/tec.h | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
include/configs/tec.h +3 -7
@@ -73,13 +73,6 @@#define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_FIT - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "ext2load mmc 0 0x17000000 /boot/uImage;" \ - "bootm" -/* LCD support */ #define CONFIG_LCD #define CONFIG_PWM_TEGRA
@@ -87,6 +80,9 @@#define LCD_BPP LCD_COLOR16#define CONFIG_SYS_WHITE_ON_BLACK +/* support the new (FDT-based) image format */ +#define CONFIG_FIT +#include "tegra-common-post.h" #endif /* __CONFIG_H */
Signature · 1 line
1.8.2
PATCH 1/4 Tegra: All Tamonten-derived boards use onboard NAND
In reply to Thierry RedingQuoted 2 lines · Thierry Reding
Move the nand-controller node to the
tegra20-tamonten.dtsiso that it can be shared between all derived boards.
The series,