cifs: on send failure, readjust server sequence number downward
Subsystems (2)
PATCH 1/1 cifs: on send failure, readjust server sequence number downward
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high.
--- fs/cifs/smb1ops.c | 3 +++ fs/cifs/transport.c | 13 +++++++++++++ 2 files changed, 16 insertions(+)
fs/cifs/smb1ops.c +3 -0
@@ -61,6 +61,9 @@ send_nt_cancel(struct TCP_Server_Info *server, void *buf,*/ --server->sequence_number; rc =smb_send (server, in_buf,be32_to_cpu (in_buf->smb_buf_length)); +if (rc <0 ) + server->sequence_number--; +mutex_unlock (&server->srv_mutex); cifs_dbg(FYI, "issued NT_CANCEL for mid %u, rc = %d\n",
fs/cifs/transport.c +13 -0
@@ -522,6 +522,9 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_rqst *rqst, rc =smb_send_rqst (server, rqst);cifs_in_send_dec (server);cifs_save_when_sent (mid); + +if (rc <0 ) + server->sequence_number -=2 ;mutex_unlock (&server->srv_mutex);if (rc ==0 )
@@ -711,6 +714,8 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses,cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); +if (rc <0 ) + ses->server->sequence_number -=2 ;mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {
@@ -835,6 +840,10 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 )
@@ -968,6 +977,10 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {
Signature · 1 line
1.7.11.7
A message that is not in the archive (sent off-list or not yet received): 1365012430-6795-1-git-send-email-jlayton-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Quoted 60 lines · Jeff Layton
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high.
Signed-off-by Jeff Layton <[email protected]>--- fs/cifs/smb1ops.c | 3 +++ fs/cifs/transport.c | 13 +++++++++++++ 2 files changed, 16 insertions(+)fs/cifs/smb1ops.c +3
-0@@ -61,6 +61,9 @@ send_nt_cancel(struct TCP_Server_Info *server, void *buf,*/ --server->sequence_number; rc =smb_send (server, in_buf,be32_to_cpu (in_buf->smb_buf_length)); +if (rc <0 ) + server->sequence_number--; +mutex_unlock (&server->srv_mutex); cifs_dbg(FYI, "issued NT_CANCEL for mid %u, rc = %d\n",fs/cifs/transport.c +9
-0@@ -522,6 +522,9 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_rqst *rqst, rc =smb_send_rqst (server, rqst);cifs_in_send_dec (server);cifs_save_when_sent (mid); + +if (rc <0 ) + server->sequence_number -=2 ;mutex_unlock (&server->srv_mutex);if (rc ==0 )@@ -711,6 +714,8 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses,cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); +if (rc <0 ) + ses->server->sequence_number -=2 ;mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {@@ -835,6 +840,10 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 )
fs/cifs/transport.c SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, · line 986
Quoted 10 lines
fs/cifs/transport.c +4
-0@@ -968,6 +977,10 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {
I was re-prioritized...I'll test the patches you'd like me to test just as soon as I can. At that point, I'll prod the list and ask for an up-to-date list of the patchset you'd like me to try.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 69 lines · On Wed, 03 Apr 2013 14:54:42 -0400 Michael Mol…
Quoted 68 lines · Jeff Layton
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high.
Signed-off-by Jeff Layton <[email protected]>--- fs/cifs/smb1ops.c | 3 +++ fs/cifs/transport.c | 13 +++++++++++++ 2 files changed, 16 insertions(+)fs/cifs/smb1ops.c +3
-0@@ -61,6 +61,9 @@ send_nt_cancel(struct TCP_Server_Info *server, void *buf,*/ --server->sequence_number; rc =smb_send (server, in_buf,be32_to_cpu (in_buf->smb_buf_length)); +if (rc <0 ) + server->sequence_number--; +mutex_unlock (&server->srv_mutex); cifs_dbg(FYI, "issued NT_CANCEL for mid %u, rc = %d\n",fs/cifs/transport.c +13
-0@@ -522,6 +522,9 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_rqst *rqst, rc =smb_send_rqst (server, rqst);cifs_in_send_dec (server);cifs_save_when_sent (mid); + +if (rc <0 ) + server->sequence_number -=2 ;mutex_unlock (&server->srv_mutex);if (rc ==0 )@@ -711,6 +714,8 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses,cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); +if (rc <0 ) + ses->server->sequence_number -=2 ;mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {@@ -835,6 +840,10 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 )@@ -968,6 +977,10 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);
Quoted 7 lines
fs/cifs/transport.c SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, · line 986
Quoted 2 lines
fs/cifs/transport.c +0
-0if (rc <0 ) {I was re-prioritized...I'll test the patches you'd like me to test just as soon as I can. At that point, I'll prod the list and ask for an up-to-date list of the patchset you'd like me to try.
This one is current vs. mainline as of today. It'll probably need to be backported to RHEL6 though. The other one you'll want to test is commit 31efee60f489c75 in the mainline tree. It too will need to be backported to rhel6, but that shouldn't be too hard...
Signature · 1 line
Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130403150227.25f37cce-9yPaYZwiELC+kQycOl6kW4xkIHaj4LzF@public.gmane.org
Quoted 80 lines · Jeff Layton
Quoted 69 lines · On Wed, 03 Apr 2013 14:54:42 -0400 Michael Mol…
Quoted 68 lines · Jeff Layton
If sending a call to the server fails for some reason (for instance, the sending thread caught a signal), then we must readjust the sequence number downward again or the next send will have it too high.
Signed-off-by Jeff Layton <[email protected]>--- fs/cifs/smb1ops.c | 3 +++ fs/cifs/transport.c | 13 +++++++++++++ 2 files changed, 16 insertions(+)fs/cifs/smb1ops.c +3
-0@@ -61,6 +61,9 @@ send_nt_cancel(struct TCP_Server_Info *server, void *buf,*/ --server->sequence_number; rc =smb_send (server, in_buf,be32_to_cpu (in_buf->smb_buf_length)); +if (rc <0 ) + server->sequence_number--; +mutex_unlock (&server->srv_mutex); cifs_dbg(FYI, "issued NT_CANCEL for mid %u, rc = %d\n",fs/cifs/transport.c +13
-0@@ -522,6 +522,9 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_rqst *rqst, rc =smb_send_rqst (server, rqst);cifs_in_send_dec (server);cifs_save_when_sent (mid); + +if (rc <0 ) + server->sequence_number -=2 ;mutex_unlock (&server->srv_mutex);if (rc ==0 )@@ -711,6 +714,8 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses,cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); +if (rc <0 ) + ses->server->sequence_number -=2 ;mutex_unlock (&ses->server->srv_mutex);if (rc <0 ) {@@ -835,6 +840,10 @@ SendReceive(const unsigned int xid, struct cifs_ses *ses, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);if (rc <0 )@@ -968,6 +977,10 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, rc =smb_send (ses->server, in_buf,be32_to_cpu (in_buf->smb_buf_length));cifs_in_send_dec (ses->server);cifs_save_when_sent (midQ); + +if (rc <0 ) + ses->server->sequence_number -=2 ; +mutex_unlock (&ses->server->srv_mutex);Quoted 7 lines
fs/cifs/transport.c SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, · line 986
Quoted 2 lines
fs/cifs/transport.c +0
-0if (rc <0 ) {I was re-prioritized...I'll test the patches you'd like me to test just as soon as I can. At that point, I'll prod the list and ask for an up-to-date list of the patchset you'd like me to try.
Quoted 5 lines
This one is current vs. mainline as of today. It'll probably need to be backported to RHEL6 though. The other one you'll want to test is commit
31efee60f489c75in the mainline tree. It too will need to be backported to rhel6, but that shouldn't be too hard...
Backporting to RHEL6 is going to be "fun". The patched version of 2.6.32 looks only vaguely similar to the context in the patch. It looks like transport.c in 2.6.32 used cifs_sign_smb{2,} in the places where these changes are likely to apply.
Unless I'm completely forgetting something I knew a month ago. Ah well. I'm sure I'll get it figured out; should only require a jaunt through that file's history.